PXI Remote Monitoring Options ?

I have a PXI 8196 that I have a LabVIEW application running on. Currently I use Windows Remote to Desktop to communicate with the PXI.
I want to see if I can control the application directly via the PC. Here are my two options:
1. Use labview remote panel
2. Webserver
I want to try and use Shared variables. Has anyone done it so far ? I understand my two options are pretty slow. Thanks !
Kudos always welcome for helpful posts

Hi Spartan,
You can certainly use Shared Variables to communicate between multiple computers. The best place to start when attempting to use Shared Variables for the first time is the LabVIEW Help Documentation. There is a How-To section on creating and configuring Shared Variables. This is also a topic covered in our LabVIEW Intermediate Customer Education Course, just in case you wanted to become a resident LabVIEW guru.
Cheers,
Emilie Kopp | National Instruments

Similar Messages

PXIe-1062Q Powerup option

I have a PXIe-1063Q and it is connected to a separate PC by MXI Express x4 board. I want to automatically power-on the chassis before the PC is turned on and have it power off automatically when the PC is shut down.
I have tried using the MXI Express x4 board to power on the chassis. However the program I downloaded from the NI support forums (Document ID:3X9GNCD8-MXI Express x1/x4 for PXI Express Powerup Options) couldn't detect the system controller thus it couldn't work.
I can power-on the chassis automatically by using the Inhibit Mode Switch but cannot have it turned off (unless I use the Remote Inhibit and Voltage Monitoring connector). If I turn off the switch using circuit breaker without powering off the chassis first, will it bring any damages to the PXI? Is there any other way to cope with this problem?

Never mind. Figured it out. I need to press the power button for several seconds and then it turns off.

Remote Monitoring Latest Best Practice Architecture

Hi guys,
I've developed very few remote monitoring systems in the past. One of them was using a PXI RT and the rest are cRIO. The approach and architecture were based from some of the things I've read from ni.com and this forum. In the process, there were much difficulties and some extensive troubleshooting exercises that I need to do. The results, while the system work and meet the user's requirements, it didn't meet my own expectation. I was hoping that the system can be expanded (adding more cRIO or PXI) with much ease and little or no re-programming effort. Anyway, 2-3 years have passed and opportunities with similar requirements has emerged. So, I would like to get started to think about the architecture at an early stage (ie. now).
In my past systems, I've used Shared Variables (SV) a lot - and it gave much much headache too. Some of the troubles I had were:
1. I can't decide whether to lump all SV in one library and host them in one system, or to separate them into various libraries and systems... neither do I know what's the best approach, as I've read too many 'suggestions' and 'advices',
2. Some of the SV are from custom control and the control is type-def. When running the VI in RT with these SV in development platform, everything works smoothly but when I compiled and deploy, the program didn't run. After extensive troubleshooting, I found out that this had something to do with these SV - because when I removed the type-def from the custom controls and recreate my SV, everything worked fine. I suspect this may have something to do with how I deploy but after I tried several approach, the problem still persist.
3. The best and most common of all is unstable connectivity - it work today but that doesn't guarantee it will work tomorrow. When the host PC changes, the same problems resurfaced again. I read somewhere that I need to read or interface with the .alias file but this work some times and other times, the same problem persist.
Attached is the most common architecture that I've used. I would like to move away from SV as much as possible. If the application is 1:1, there's no problem as I can easily use TCP/IP & Network Stream. However, my doubts and headache comes when the RT:Host communication is either 1:N, N:N or N:1. I've read in ni.com and found out that there are various new approach to this, such as AMC (derivated from UDP), Web Services (or was it HTTP).
I really appreciate it if you guys share your thoughts and advices here, please?
Shazlan
Attachments:
Remote Mon Sys - Arch.pdf ‏27 KB

Nick,
I was not talking about the mgmt0 interface. The vlan that you are testing will have a link blocked between the two 3750 port-channel if the root is on the nexus vPC pair.
Logically your topology is like this:
| |
| Nexus Pair |
3750-1-----------------------3750-2
Since you have this triangle setup one of the links will be in blocking state for any vlan configured on these devices.
When you are talking about vPC and L3 are you talking about L3 routing protocols or just intervaln routing.
Intervlan routing is fine. Running L3 routing protocols over the peer-link and forming an adjaceny with an router upstream using L2 links is not recommended. Teh following link should give you an idea about what I am talking here:
http://bradhedlund.com/2010/12/16/routing-over-nexus-7000-vpc-peer-link-yes-and-no/
HSRP is fine.
As mentioned tracking feature purpose is to avoid block hole of traffic. It completely depends on your network setup. Don't think you would be needing to track all the interfaces.
JayaKrishna

Remote Monitoring

Hi,
I want to remote monitor my PXI system using a PC (PC will not have LabVIEW/LabVIEW RTE installed) through the web.
I just tried the windows Remote Desktop and the web publishing tool by enabling web server in web server configuration. But for this the PC should have LabVIEW and the LabVIEW RTE installed in it. But i wont to install LabVIEW in the PC through i will monitor. Is there any way?.......
Regards,
Rajashekar

Yes, the use of remote panels requires the installation of the runtime engine on the remote pc so if you want (wont) to install it, go ahead. Its free to download and install.

Remote monitoring entry in SOLMAN

Hi ,
I am trying to create Remote monitoring entry in SOLMAN but after I create and save , it says entry is saved in secure area but dos not reflect in system topology.
It give me the following message after save :
ECD_RZ20_COLLECT_072949Error when opening an RFC connection
Error during remote call of SAL_MS_GET_LOCAL_MS_INFO function: Error when opening an RFC connection
Error during remote call of SALC function: Error when opening an RFC connection
Error during remote call of RFC1 function: Error when opening an RFC connection
Please advise
thanks
Regards
Aditi

Hi Aditi,
Is your issue solved ?If so please let me know.. i am also facing the same issue .
Thanks in advance..
Srini

RFC error while adding an remote monitoring entry to CEN

Hi,
I am trying to add an remote system to CEN by RZ21 i.e.
in RZ21 -> Technical Infrastructure -> Configure Central system -> Create Remote Monitoring Entry
But while testing RFC connections before saving, it giving following erros :
SC4_RZ20_COLLECT_195119Error when opening an RFC connection
Error during remote call of SAL_MS_GET_LOCAL_MS_INFO function: Error when opening an RFC connection
Error during remote call of SALC function: Error when opening an RFC connection
Error during remote call of RFC1 function: Error when opening an RFC connection
Are these errors of any concern?
or shall i go ahead and save the entries?
Please suggest.

Hi,
ssue has been fixed after following
SAP Note 1453112 - CCMS agent and kernel: patches 2010
1:) Here we first performed kernel upgrade then re register agents as per note.
2:) While for mentioned error during remote monitoring entry we checked in path
Tcode-> sm59-> TCP/IP connectiones -> then in RFC destination SAPCCM4X.<SID>.<instance no> and found destination information was not correct so we corrected as
SAPCCM4X.<monitoring system id>.<instance no> then
then perform remote monitoring entrory steps via RZ21 and issue got resoulved

Itunes 10.2.1 does not show remote speakers option

I have been having a strange issue on one of my laptops. I have two laptops - one with Windows 7 64bit and Windows XP 32 bit. On both laptops, I was able to connect to the airport express to stream music to my home theater (receiver) till a few months back. Both have the latest version of Itunes - 10.2.1. Now, the Windows 7 laptop continues to work fine but the Windows XP laptop is having problems. *Itunes does not show the remote speaker option. The airport utility does not recognize the airport express.* In the Windows Firewall exceptions, there are entries for Bonjour (port 5353 UDP), Bonjour Service (mDNSresponder.exe) and Itunes.exe and all are checked. Even if I disable firewall, it does not resolve anything.
The airport express is connected through an ethernet cable to the Belkin Wireless N router. The wireless mode for the airport express is switched off. The firmware on the airport express is version 6.3.
Few differences between the two laptops
Windows XP: I use a Belking Wireless N Notebook card to connect to the Belkin Wireless N Router. Antivirus is "McAfee VirusScan Enterprise + Antispyware Enterprise 8.7.0i"
Windows 7: I use the inbuilt wireless to connect to the same router. Antivirus is "ESET Smart Security 4.0"
Can someone help? I have researched the forum and tried the following things but still does not help.
1. Tried uninstalling Itunes and Airport Utility and reinstalling
2. Tried disabling Windows Firewall

I solved my problem I tried several other programs to play my music and since nothing seemed to work, i started deleting other software from my computer and apparently Uniblue's RegistryBooster was the one that caused the problem. Now able to enjoy music from my computer again

Windows 8.1 Pro Need command to disable "Use default gateway on remote network" option on VPN connection"

Hello!
I want to create bat script to create several VPN connection.
There is powershell command to create vpn connection:
add-vpnconnection -name "Test VPN" -serveraddress "vpn.example.com" -splittunneling -tunneltype "pptp"
And I need to create VPN connection without the option "Use default gateway on remote network" option on VPN connection"
Or modify this option on existent VPN connection with command.
Please help me to find command option or other command to disable "Use default gateway on remote network" option on VPN connection" feature.

http://technet.microsoft.com/nl-nl/library/ee431701%28v=ws.10%29.aspx RouteIPv4TrafficOverRAS True – Add a default gateway on the VPN connection False – Do not add default gateway on the VPN connection

Best Practice for ASA Route Monitoring Options?

We have one pair Cisco ASA 5505 located in different location and there are two point to point links between those two locations, one for primary link (static route w/ low metric) and the other for backup (static route w/ high metric). The tracked options is enabled for monitoring the state of the primary route. the detail parameters regarding options as below,
Frequency: 30 seconds               Data Size: 28 bytes
Threshold: 3000 milliseconds     Tos: 0
Time out: 3000 milliseconds          Number of Packets: 8
------ show run------
sla monitor 1
type echo protocol ipIcmpEcho 10.200.200.2 interface Intersite_Traffic
num-packets 8
timeout 3000
threshold 3000
frequency 30
sla monitor schedule 1 life forever start-time now
------ show run------
I'm not sure if the setting is so sensitive that the secondary static route begins to work right away, even when some small link flappings occur.
What is the best practice to set those parameters up in the production environment. How can we specify the reasonanble monitoring options to fit our needs.
Thank you for any idea.

Hello,
Of course too sensitive might cause failover to happen when some packets get lost, but remember the whole purpose of this is to provide as less downtime to your network as possible,
Now if you tune these parameters what happen is that failover will be triggered on a different time basis.
This is taken from a cisco document ( If you tune the sla process as this states, 3 packets will be sent each 10 seconds, so 3 of them need to fail to SLA to happen) This CISCO configuration example looks good but there are network engineers that would rather to use a lower time-line than that.
sla monitor 123
type echo protocol ipIcmpEcho 10.0.0.1 interface outside
num-packets 3
frequency 10
Regards,
Remember to rate all of the helpful posts ( If you need assistance knowing how to rate a post just let me know )

Sound on remote monitor

I'm trying to get a basic TV to work as a remote monitor on my HP Pavillion laptop. The picture is fine - but there is no sound. It's connected via the RS232 AV output socket and the OS is Windows 7 64bit. Be very grateful for any ideas?

I have trouble with my remote speakers cutting out
intermittently. Does anyone know why this might
happen? It doesn't seem to be related to the load on
the processor. It's like when listening to internet
radio and you lose the connection for a second or
two. Very annoying.
iMac
USB 2.0 Mac OS X (10.4.9) Nothing
original inside!
I had the same problem even when a Windows laptop streamed music fine. I changed the channel from automatic to channel 11 in the Airport Admin Utility. Presto! Music!
MacBook Mac OS X (10.4.9)

Is iphone JAVA-capable for Cingular Remote Monitoring?

AT&T/Cingular has a service called Remote Monitor that lets you put up cameras, motion sensors etc at a site and monitor them remotely using the internet or a java-based application that you can download to a Cingular phone. Great for monitoring a 2nd home.
Somehow I don't think it's possible to use the java-based application on the iphone. I may be able to use the Safari connection and use the internet for it, although this is slower and non-dedicated. Does anyone have any experience with this? Is Safari on the iphone capable of viewing live video?

no right now you cant but this would make a great thrid party app from Apple for the iPhone... Suggest it
Apple strives to bring the best personal computing experience to students, educators, creative professionals and consumers around the world through its innovative hardware, software and Internet offerings. Apple welcomes your feedback on its products (in accordance with the Unsolicited Idea Submission Policy). To comment on the iPhone, visit http://www.apple.com/feedback/iphone.html.

UCCX 9 IPPA Remote Monitor using rmon.aef

Question, can you utilize the rmon.aef script to remote monitor agents that use IPPA at a remote site? Trying to figure out ways to monitor an agent in this scenario since SPAN and Desktop Monitoring can't be utilized given that they're using IPPA and are remote from UCCX. Thoughts?

There are lots of reasons why monitoring and recording can fail in an environment.
There are also lots of troubleshooting steps to verify a working environment as well.
You can start by searching these forums for terms like "monitoring not working", "silent monitoring", "remote monitoring", etc.
You may even find, within those posts, links to configuration and troubleshooting documents, such as:
http://www.cisco.com/en/US/customer/products/sw/voicesw/ps556/products_tech_note09186a00801a62a8.shtml
http://www.cisco.com/en/US/products/sw/custcosw/ps1846/products_tech_note09186a008075025a.shtml
http://www.cisco.com/en/US/products/sw/custcosw/ps1846/products_tech_note09186a0080bbd522.shtml
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/cad_enterprise/non_release_docs/voip-mon-troubleshooting.pdf
The most common issue is, your regions are G711, and the IP Phones are negotiating G722, which cannot be recorded.
To verify, when an Agent is on a call, double tap the ? button on the phone and read the codec.
If it's G722, in CUCM, go to the Agent's phone, and switch the Advertise G722 from Use System Default to Disabled, save and reset, try again.
Anthony Holloway
Please use the star ratings to help drive great content to the top of searches.

Remotely monitor my CCTV system using my Mac

I am in the process of installing a CCTV system at my house with a VXM4 DVR Hard drive recorder. It is very straight forward to remotely monitor the system using a PC with an internet connection, but I can't seem to do it using my Mac. I desperately don't want to use a PC to do this. Does anyone know how I can do it using my MAC. Thank you.

Casino128 wrote:
I am in the process of installing a CCTV system at my house with a VXM4 DVR Hard drive recorder. It is very straight forward to remotely monitor the system using a PC with an internet connection, but I can't seem to do it using my Mac. I desperately don't want to use a PC to do this. Does anyone know how I can do it using my MAC. Thank you.
Welcome to the Apple boards.
Does your camera/recorder itself connect to the internet? Some do and all you need to do is browse to the IP address it is set for, just like any other website.

Solution Manager Create remote monitoring entry

Hello,
I need some help or clarification please. We just upgraded our Solution Manager to EHP1 spk25 and I'm trying to setup Solman to support central system monitoring. I'm on the last step to enter the moitored ABAP system in CEN through RZ21 Techincal >Configure Central System>Create remote monitoring entry.
I can enter my own System ID but can't enter the RFC destination ? These default to *_RZ20_Collect and *_RZ20_Analyze. I want to use the RFC's already in place through Charm since these are already setup and working correctly. Can someone tell me how to change this or why we have to use the defaults.
Thanks in advance
Stephanie

Please disregard.
Thanks

How to disable remote wipe option for mobile devices

Hi,
I have integrated environment of SCCM 2012 R2 and Windows Intune. I am managing Windows phone, Android and IOS devices through this setup. I was trying find an option to disable remote wipe option in the SCCM Console. Only selective wipe should be available.
Can you please help me on how to configure this setting.
Regards
Leela

I got the below response from the micososft intune team.
"Issue Definition: Cx would like remote wipe disabled
in the Admin console.
Scope Agreement: Disable remote wipe feature from account.
You will not be able to block this feature using Microsoft Intune. System
Center Configuration Manager might be able to control this feature. You
might consider opening a case with their team.
The other thing to consider, is to limit the amount of Admin users you have.
Anyone that is given Admin rights in Microsoft Intune will have the ability to
use the wipe feature. "
I have raised a ticket with SCCM 2012 team, awaiting their response.
Regards
Leela

PXI Remote Monitoring Options ?

Similar Messages

Maybe you are looking for