PXI system cannot be identified by the PC

PC doesn't see the PXI system. When I tried to install the service platform for chassis and controller ver 2.5. A message states that a higher version is already installed.

Hi Gordoo3,
Can you expand on the hardware you are using (Chassis, Controller, Devices, etc.)? Do you have a MXI connection to your PC? Have you identified the chassis in MAX? Here is a Knowledgebase article that describes this process.
Best,
Adam
Academic Product Manager
National Intruments

Similar Messages

The system cannot download information from the SQLSERVER server.

Hi All,
After BPC 7.0 SP6 for MS install we get the following when trying to access the "Manage Application Sets" or any other admin console task, when we try to execute the connection wizard:
The system cannot download information from the SQLSERVER server.
There may be a network or security issue.
Error Message:Error code: 500
any ideas?
Br
Steven

Steven,
Could you also make sure that the problem is not on the client side.
Is this a fresh installtion on the client machine? Or was there already an previous version of BPC on this machine?
If this is not a fresh install, you can try to uninstall the software and then deleting all the files in the folder
"program files\BPC". I've seen that sometimes not all the files are automatically deleted.
Then installing the Bpc client agian...
Kind regards,
Sam

I am using XNET CAN on a PXI system. When I modify the can database I get the error "the interface has already been opened.."

I have tried both building the XNET session from project explorer and by building a signal list in the VI.
Any suggestions? Thanks in Advance.

Thanks for the reply. I don't think I have any interface open. But to be sure, I rebooted everything - same result.
Is there some step in the project config that I am failing to do? In the PXI systems I had before XNET, I had to setup some CAN configuration stuff in MAX to get it to work, but I don't see that option anymore with XNET....
I have been sucessful in running XNET CAN VIs reading and writing the data from my database, but I stumble every time I add a signal or rename the database.
I made a simplified VI to illustrate, using a previously working database I now get the empty name message.(screen capture attached)
This is connected to a working CAN link, and I can see these signals in MAX properly.
Thanks in advance for your assistance!
Attachments:
vi_issue1.jpg ‏136 KB

PXI System does not appear in MAX 4.0

Hello,
My system comprises LabVIEW RT 7.0, target PXI-8176 controller in PXI-1000B chassis, PXI-6608, PXI-6711, NI-4472, PXI-6704, PXI-6527, PXI-8423/4, PXI-8422/4. This has been stable for two years. I recently solved an RS-485 2-wire mode configuration problem, using information in a discussion forum thread, by upgrading to NI-VISA 3.4.1 and NI-Serial 2.5.5. MAX 4.0 was installed as part of this process. Everything seemed to work fine. I instructed a distant customer to do the same, but they experienced some difficulty. To ensure we were working from the same starting point, I re-initialized my PXI system, using PXI Format Hard Drive Disk, version 7.0, from MAX 4.0. I configured TCP IP address, and re-installed the RT software on the PXI controller.
Next, I attempted to configure the PXI controller and chassis, in MAX, to update the pxisys.ini file, but the PXI System (Unidentified) does not appear under Remote System>>IP address>>Devices and Interfaces. Similarly for the serial ports. This worked before, but I cannot get this back. What is wrong?
Best regards,
RonC

Hello S. Bassett
The controller is definitely booting in RT mode -- I can still run my applications on the RT target. VISA seems configured properly also, I can make VISA calls without error in the application.
In fact, the RT system seems to work correctly, and I contemplated leaving it as it is. However, the fact that MAX does not recognize the PXI system makes me nervous, and I cannot do some of the things I may want to do, for example independently configure RS-485 port wire mode in MAX (the ports do not show up either). Traditional DAQ configuration in MAX works.
After your last post, I found a brief reference in MAX Help that indicated "PXI Services" had to be downloaded before the chassis could be configured. But there are no other mentions of what PXI Services is, what it does, or how to install them. PXI Services does not show up as RT Software in MAX. In the Windows Add/Remove Programs control panel in Windows, in the National Instruments software section, there are two apparently related entries:
- NI PXI Platform Services for LabVIEW Real-Time 1.5.1
- NI PXI Platform Services for Windows 1.5.1
But, I cannot get these to install on the RT target. Not knowing what was causing the problem, I uninstalled everything from National Instruments, deleted all folders, and reformatted the PXI platform. There was one problem during this process -- after uninstalling NI-Serial 2.5.5, it does not get removed from the Add/Remove programs control panel. There is still a registry key that the uninstaller did not remove -- presumably this is the problem.
I have rebuilt everything, but could not get NI-Serial to install -- the installer thinks there is a newer installed on the RT target (there isn't) and refuses to install NI-Serial 2.5.5. So right now, I cannot install NI-SERIAL (any version), or remove the 'existing' NI_SERIAL, because it isn't actually there, and there is no uninstaller.
Otherwise, everything seems to be back to where it was before I "upgraded" to NI-VISA 3.4.1. This was NI-VISA 3.0, LV RT 7.0, and MAX 3.0.2. I have not yet been able to install NI-Serial, so I cannot yet see if I have also restored my original problem -- the one that led me to have to upgrade NI-VISA and NI-SERIAL in the first place.
Most importantly, there is now a "PXI Services v1.1.2" installed on the RT target. I am quite sure the problem with MAX 4.0 not recognizing my PXI system has to do with the absence of this driver on the RT target.
Thanks again for your interest and help,
RonC

Error in installing NI 488.2 in PXI system

Hi, all
We have a VA-HR instrument and agilent power supplies, which we are being controlled through USB interface in one computer. all the supplies and VA-HR are controlled via single USB.
Now we want to controll these instruments from another computer which is a PXI system with NI PXI 8105 Embedded controller. (PXI system contains Windows XP service Pack 2)
When the USB cable was plugged into PXI system, it gave folowing message:
Found new hardware, USB serial controller D, and also the GPIB-USB-HS.
So we came to conclusion that it requires USB serial controller D drivers as well as GPIB-USB-HS(GPIB-USB-B) drivers.
For that i did download NI 488.2 2.7.3 from NI website and tried to install that into PXI SYSTEM. But during installation, the process rolled back from driver installation and gave an error. i tried this for atleast three times. In other PC the same .exe source of NI 488.2, successfully installed NI 488.2 software without any error.
I can't understand why this NI 488.2 is not being installed.
LABview 8.6 is already installed in the system.
In short i want to connect my Power supplies and VA-HR to PXI system. Please help me out in this installation error.
thanks and regards,
vishal sakarvadiya

muks
Proven Zealot
What is the error you are getting?
HI, muks
Now I have attached the images with this message which shows sequence of process that was followed during installation of NI 488.2 in PXI system.
STEP-1...
STEP-2...
STEP-3....
STEP-4.....
STEP-5.....

ERROR: cannot find information from the FND_FORM_FUNCTIONS table

Hi,
I am in CU2, i have created my project, set the right responsibility in Project property panel of my Jdeveveoper.
When i run the first page all is ok, but if i click on a h-grid link , i receive the following error:
"Your system has not been properly set up. The system cannot find information from the FND_FORM_FUNCTIONS table which is needed for this process. Please consult your System Administrator for further assistance."
This happens only if i launch the custom from jdeveloper. On the Applications, the custom works fine.
Any idea about the error?
Thanks in advance,
Carlo

Please check the calling logic which is written to invoke the custom form from the existing form.

IDOC Status 26: EDI: Syntax error in IDoc (segment cannot be identified).

Hi All,
I have created IDOC extension for IDOC Basic type "PROACT01" and have followed all required necessary steps but getting IDOC
Status 26. EDI: Syntax error in IDoc (segment cannot be identified). The exact error is:
Please check Error Details and the details of the steps I followed for Setting up IDOC Extension:
Error Detail :
EDI: Syntax error in IDoc (segment cannot be identified)
Message no. E0078
Diagnosis
The segment ZPROSEG does not occur at the current level of the basic type PROACT01 (extension PROACTEX).
This error can have several reasons:
The segment ZPROSEG is assigned to a group whose header segment does not occur.
The segment ZPROSEG does not exist in the syntax description of the basic type PROACT01 (extension PROACTEX).
The sequence of segments in the group in which the segment appears is incorrect.
Previous errors ('mandatory' segment or group missing) may be due to this error.
Procedure
Please check the IDoc or the syntax description of the basic type PROACT01 (extension PROACTEX).
Can you please look at this problem and suggest what is wrong with IDOC Extension/Custome Segment?
Below is the Details of the Steps which I have followed:
1. Tcode WE31 - Created new custom Segment ZPROSEG with 4 fields. Released segment.
2. TCode WE30 - Created IDOC Extension PROACTEX for Basic Type PROACT01. Released IDOC extension.
Here when I run syntax check warning appears "No predecessors exist". I am not sure if its okay!!
3. TCode WE82 - Added Extension PROACTEX in the Message Type PROACT with BASIC Type PROACT01.
4. TCode WE20 - Added IDOC Extension PROACTEX in the predefined partner profile in WE20 transaction.
5. Added the following code in the Customer Exit EXIT_SAPLWVMI_001 include ZXWVMIU01 .
DATA segnam(27).
READ TABLE dedidd WITH KEY segnam = 'ZPROSEG'.
IF sy-subrc NE 0.
LOOP AT dedidd WHERE segnam = 'E1EDP31'.
CLEAR dedidd.
dedidd-segnam = 'ZPROSEG'.
zproseg-matnr = 'Mat1'.
zproseg-lgort = '001'.
zproseg-gernr = 'SNo1'.
zproseg-labst = 2.
dedidd-sdata = zproseg.
APPEND dedidd.
ENDLOOP.
ENDIF.
Finally ran transaction WVM2 (Transfer of Stock & Sales Data) to generate IDOC, its creating IDOC but when checked IDOC in WE05 its getting Status Error "26".
Looking forward for your reply.
Many thanks in advance.

Hello,
Actually you are appending the Z segment instead of inserting into the correct position. So the segment is added at the last, so hierarchy of segments is collapsed.
So get the index of the previous segment E1EDP31 and increase the index by 1 and INSERT the Z segment with that new index as below.
LOOP AT dedidd WHERE segnam = 'E1EDP31'.
lv_index = sy-tabix. " <<--
ADD 1 TO lv_index. " <<--
CLEAR dedidd.
dedidd-segnam = 'ZPROSEG'.
zproseg-matnr = 'Mat1'.
zproseg-lgort = '001'.
zproseg-gernr = 'SNo1'.
zproseg-labst = 2.
dedidd-sdata = zproseg.
*APPEND dedidd.
INSERT dedidd INDEX lv_index. " <<---
ENDLOOP.
Here actually we are insering the record inside the LOOP and it regenerates the index again. It is not actually a good practice.
So the best practice is get the index and generate the segment inside the loop, store them into another internal table, come out the loop and insert the Z segments into DEDIDD by looping the new internal table.

I am getting text messages from a "textfree" number that cannot be identified

I am getting text messages from a "textfree" number that cannot be identified. The text messages are threatening and I am trying to match the unknown number to a person. How can I do that?

Hello uncl@home,
Thanks for reaching out to us for assistance with unwanted texts on your device. After all, we're always here to help when you need us. I wanted to touch bases with you to see if the issue has been resolved. Just curious, are you getting unwanted texts from a 10-digit number? If so then you can have the texts blocked at www.vzw.com/spamcontrols. For all other unwanted texts, forwarding them to 7726 is the method to have them addressed. Let me know, just in case more options are needed.
Thank you...
ArnettH_VZW
Follow us on Twitter @VZWSupport

During boot, the system says that the main system board maker cannot be identified

System: HP Pavilion dv7 Notebook, Windows 7 Home Premium
Problem: During boot, the system says that the main system board manufacturer cannot be identified. If I ignore and tell it to continue, it wants to CHDSK. If I skip that, the computer finishes booting and seems to operate normally.
How can I fix this?

Hi Gordoo3,
Can you expand on the hardware you are using (Chassis, Controller, Devices, etc.)? Do you have a MXI connection to your PC? Have you identified the chassis in MAX? Here is a Knowledgebase article that describes this process.
Best,
Adam
Academic Product Manager
National Intruments

Error message on my development workstation: The system cannot find the file specified.

Post Author: cseverin
CA Forum: Crystal Reports
Hi,
I am currently developing an ASP.NET website using Visual Studio.NET 2005. I am using the .NET 2.0 framework, VB.NET as my programming language and I connect successfully to a SQL Server 2005 database. I can select, insert, update and delete data from the database elsewhere in my project, so I know basic connectivity isn't an issue. The problem seems to be with Crystal Reports.
I created a folder called 'Reports' in my project and added a Crystal Report file (OpenFiles.rpt) to it. I designed the report and initally used a hard-coded SQL query as its datasource so I could quickly get the database fields onto the report and preview them. All worked fine.
To make the report accessible to the rest of the website, I created an .xsd dataset file containing the three tables (and their corresponding tableadapters) that the report requires and then redeveloped the report using the dataset as the datasource for the report. After doing this, the preview no longer worked.
Next, I added a page to the website and dragged a Crystal Report Viewer Control onto it. In the code behind the page I wrote:
Option Strict On
Imports System.Data
Imports CrystalDecisions.CrystalReports.Engine
Imports CrystalDecisions.Shared
Partial Class Reports
     Inherits System.Web.UI.Page
     Private objOpenFilesreport As OpenFilesReport
     Private rptOpenFiles As ReportDocument
     Private strLastErrorMessage As String = Nothing
     Private errLastException As Exception = Nothing
     Dim strFileKey As String
     Dim strJurisdictionCode As String
     Dim strStaffId As String
     Dim strReportId As String
     Private Sub ConfigureCrystalReports()
          Dim reportPath As String = Server.MapPath("OpenFiles.rpt")
          Dim rptopenfiles As New ReportDocument
          rptOpenFiles.Load(reportPath) <== I checked this during execution and the value correctly points to the OpenFiles.rpt file in the Reports     folder of my project
          Dim ConnectionInfo As ConnectionInfo = New ConnectionInfo()
          ConnectionInfo.DatabaseName = my database
          ConnectionInfo.UserID = login id of user
          ConnectionInfo.Password = user's password
          SetDBLogonForReport(ConnectionInfo, rptopenfiles)
          CrystalReportViewer1.ReportSource = rptopenfiles
     End Sub
     Protected Sub Page_Init(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Init
         ConfigureCrystalReports()
     End Sub
     Private Sub SetDBLogonForReport(ByVal ConnectionInfo As ConnectionInfo, ByVal myReportDocument As ReportDocument)
          Dim myTables As Tables = myReportDocument.Database.Tables
          For Each myTable As CrystalDecisions.CrystalReports.Engine.Table In myTables
               Dim myTableLogonInfo As TableLogOnInfo = myTable.LogOnInfo
               myTableLogonInfo.ConnectionInfo = ConnectionInfo
               myTable.ApplyLogOnInfo(myTableLogonInfo)
          Next
     End Sub
End Class
I added a hyperlink to one of the existing pages on the website to navigate to this page with the report viewer on it. When I run the website in Visual Studio and click on the hyperlink I get the following:
Server Error in '/MyTest' Application.
The system cannot find the file specified.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Runtime.InteropServices.COMException: The system cannot find the file specified.Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace:
[COMException (0x80004005): The system cannot find the file specified.
]
   CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.Open(Object& DocumentPath, Int32 Options) +0
   CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.Open(Object& DocumentPath, Int32 Options) +126
   CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened() +442
[Exception: Load report failed.]
   CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened() +513
   CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob) +1378
   CrystalDecisions.CrystalReports.Engine.ReportDocument.EnsureLoadReport() +149
   CrystalDecisions.CrystalReports.Engine.ReportDocument.get_DataDefinition() +85
   CrystalDecisions.CrystalReports.Engine.ReportDocument.get_ParameterFields() +158
   CrystalDecisions.Web.CrystalReportSource.BindControlParameter(Parameter parameter) +130
   CrystalDecisions.Web.CrystalReportSource.DataBindParameters() +191
   CrystalDecisions.Web.CrystalReportSource.EnsureParameters(Boolean forceDataBind) +90
   CrystalDecisions.Web.CrystalReportSource.LoadCompleteEventHandler(Object sender, EventArgs e) +47
   System.Web.UI.Page.OnLoadComplete(EventArgs e) +96
   System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +4086
Version Information: Microsoft .NET Framework Version:2.0.50727.832; ASP.NET Version:2.0.50727.832
Any ideas, anyone?
Also, assuming I can get past this error, I will need to figure out how to fill the tables in the .xsd dataset file. I have written a class for the dataset that includes functions that populate the tables in the dataset from the database by executing SQL queries. But how do I call these functions at the time the report is run?
This is my first Crystal report written in .NET and I've been struggling with it for days now. Any help would be most appreciated!
Thanks very much!
Chris Severin

hello, the error message is obviously coming from one of the installed mcafee extensions. please directly contact mcafee technical support - they can likely give you more detailed guidance and are the only ones who can fix bugs or make necessary adjustments in the addon.

Upgrading to MBAM 2.5: Could not load file or assembly 'System.Web.WebPages.Razor, Version=2.0.0.0.....the system cannot find the file specified.

Upgrading from MBAM 1.0 to 2.5 on the Administration and Monitoring server (database server already upgraded). To upgrade the administration server, I uninstalled MBAM 1.0 -> Deleted the MBAM website from IIS manually -> Reboot -> Installed MBAM
2.5. After upgrade if I go to selfservice portal via
https://myserver.mycompany.com/selfservice, I get this error:
Server Error in '/SelfService' Application.
Could not load file or assembly 'System.Web.WebPages.Razor,
Version=2.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its
dependencies. The system cannot find the file specified.
Description:
An unhandled exception occurred during the execution of the current web
request. Please review the stack trace for more information about the error and
where it originated in the code.
Exception Details:
System.IO.FileNotFoundException: Could not load file or assembly
'System.Web.WebPages.Razor, Version=2.0.0.0, Culture=neutral,
PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot
find the file specified.
Source Error:
An unhandled exception was generated during the execution of the
current web request. Information regarding the origin and location of the
exception can be identified using the exception stack trace below.
Stack Trace:
[FileNotFoundException: Could not load file or assembly 'System.Web.WebPages.Razor, Version=2.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified.]
System.Web.Mvc.PreApplicationStartCode.Start() +0
[InvalidOperationException: The pre-application start initialization method Start on type System.Web.Mvc.PreApplicationStartCode threw an exception with the following error message: Could not load file or assembly 'System.Web.WebPages.Razor, Version=2.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified..]
System.Web.Compilation.BuildManager.InvokePreStartInitMethodsCore(ICollection`1 methods, Func`1 setHostingEnvironmentCultures) +12980619
System.Web.Compilation.BuildManager.InvokePreStartInitMethods(ICollection`1 methods) +12980328
System.Web.Compilation.BuildManager.CallPreStartInitMethods(String preStartInitListPath, Boolean& isRefAssemblyLoaded) +280
System.Web.Compilation.BuildManager.ExecutePreAppStart() +172
System.Web.Hosting.HostingEnvironment.Initialize(ApplicationManager appManager, IApplicationHost appHost, IConfigMapPathFactory configMapPathFactory, HostingEnvironmentParameters hostingParameters, PolicyLevel policyLevel, Exception appDomainCreationException) +1151
[HttpException (0x80004005): The pre-application start initialization method Start on type System.Web.Mvc.PreApplicationStartCode threw an exception with the following error message: Could not load file or assembly 'System.Web.WebPages.Razor, Version=2.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified..]
System.Web.HttpRuntime.FirstRequestInit(HttpContext context) +12979668
System.Web.HttpRuntime.EnsureFirstRequestInit(HttpContext context) +159
System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest wr, HttpContext context) +12819261
Anyone know how to solve this? Thanks in advance

Sorry for late response. I fixed the issue by installing the correct version of ASP .NET 4 from
here.
If .NET Framework 4.5 is already installed, also run aspnet_regiis -i from C:\windows\microsoft.net\Framework\v4.0.30319

Bitlocker "The system cannot find the file specified"

I am trying to get Bitlocker working on the C: drive of a Dell Venue 11 (5130) 32bit, running Windows 8.1Update Enterprise. I click Turn on BitLocker and the system checks the perrequisites and is happy. Then I type in a PIN (6 numbers) and confirm it and
hit Set PIN. At this point it fails with a message saying "The system cannot find the file specified".
I am an Admin on the machine. TPM is working fine. GPO is not setting either BitLocker or TPM to store on the AD DS. Secure Boot is turned on in BIOS. Plus I've tried the reverse of all of these.
I've spent hours reading through web articles without any joy, so I'm hoping someone can give me a pointer. Please.

Hi guys,
Almost have the same problem, and still not able to solve it now [despite lots of search].
I used to have BitLocker working on my laptop, but I removed it before cloning [with Paragon] my SSD to a new and bigger one. When I replaced the SSD the system did not boot, and I had to create a new BCD store by copying UEFI boot files from the system
directory on fix the UEFI boot partition. When the boot problem was fixed, I used gParted to extend my C: partition and delete useless recovery partitons at the end of the drive. So actual partitioning is as follow [as per Diskpart]:
Partition ### Type                Size         Offset
Partition 1         Recovery         500 MB   1024 KB
Partition 2         System            300 MB    501 MB
Partition 3         Reserved         128 MB    801 MB
Partition 4         Primary            930 GB    929 MB
So I guess I made something wrong when I tried to repair the UEFI boot partition... Well, now it boots correctly, but I can't enable BitLocker anymore and get the not-so-explicit "The system cannot find the file specified" error you had. Here is
what I get with a "bcdedit.exe /enum ALL":
Firmware Boot Manager
identifier              {fwbootmgr}
displayorder            {bootmgr}
                        {d10304b6-5db7-11e4-bf1c-806e6f6e6963
                        {d10304b1-5db7-11e4-bf1c-806e6f6e6963
                        {d10304b2-5db7-11e4-bf1c-806e6f6e6963
                        {d10304b4-5db7-11e4-bf1c-806e6f6e6963
                        {d10304b3-5db7-11e4-bf1c-806e6f6e6963
                        {d10304b5-5db7-11e4-bf1c-806e6f6e6963
timeout                 0
Windows Boot Manager
identifier              {bootmgr}
device                  partition=\Device\HarddiskVolume2
path                    \EFI\Microsoft\Boot\bootmgfw.efi
description             Windows Boot Manager
locale                  en-gb
inherit                 {globalsettings}
default                 {current}
resumeobject            {4496c237-5dd0-11e4-be46-f1ba631dfb0b
displayorder            {current}
toolsdisplayorder       {memdiag}
timeout                 30
Firmware Application (101fffff)
identifier              {d10304ae-5db7-11e4-bf1c-806e6f6e6963
description             Setup
Firmware Application (101fffff)
identifier              {d10304af-5db7-11e4-bf1c-806e6f6e6963
description             Boot Menu
Firmware Application (101fffff)
identifier              {d10304b0-5db7-11e4-bf1c-806e6f6e6963
description             Recovery
Firmware Application (101fffff)
identifier              {d10304b1-5db7-11e4-bf1c-806e6f6e6963
description             SATA HDD:
Firmware Application (101fffff)
identifier              {d10304b2-5db7-11e4-bf1c-806e6f6e6963
description             USB CD:
Firmware Application (101fffff)
identifier              {d10304b3-5db7-11e4-bf1c-806e6f6e6963
description             USB FDD:
Firmware Application (101fffff)
identifier              {d10304b4-5db7-11e4-bf1c-806e6f6e6963
description             USB HDD:
Firmware Application (101fffff)
identifier              {d10304b5-5db7-11e4-bf1c-806e6f6e6963
description             NETWORK:
Firmware Application (101fffff)
identifier              {d10304b6-5db7-11e4-bf1c-806e6f6e6963
device                  partition=\Device\HarddiskVolume2
path                    \EFI\Microsoft\Boot\bootmgfw.efi
description             Windows Boot Manager
Windows Boot Loader
identifier              {current}
device                  partition=C:
path                    \Windows\system32\winload.efi
description             Windows 8.1
locale                  en-gb
inherit                 {bootloadersettings}
isolatedcontext         Yes
allowedinmemorysettings 0x15000075
osdevice                partition=C:
systemroot              \Windows
resumeobject            {4496c237-5dd0-11e4-be46-f1ba631dfb0b
nx                      OptIn
bootmenupolicy          Standard
detecthal               Yes
Resume from Hibernate
identifier              {4496c237-5dd0-11e4-be46-f1ba631dfb0b
device                  partition=C:
path                    \Windows\system32\winresume.efi
description             Windows Resume Application
locale                  en-gb
inherit                 {resumeloadersettings}
isolatedcontext         Yes
allowedinmemorysettings 0x15000075
filedevice              partition=C:
filepath                \hiberfil.sys
bootmenupolicy          Standard
debugoptionenabled      No
Windows Memory Tester
identifier              {memdiag}
device                  partition=\Device\HarddiskVolume2
path                    \EFI\Microsoft\Boot\memtest.efi
description             Windows Memory Diagnostic
locale                  en-gb
inherit                 {globalsettings}
badmemoryaccess         Yes
EMS Settings
identifier              {emssettings}
bootems                 No
Debugger Settings
identifier              {dbgsettings}
debugtype               Serial
debugport               1
baudrate                115200
RAM Defects
identifier              {badmemory}
badmemorylist           0x10007
Global Settings
identifier              {globalsettings}
inherit                 {dbgsettings}
                        {emssettings}
                        {badmemory}
Boot Loader Settings
identifier              {bootloadersettings}
inherit                 {globalsettings}
                        {hypervisorsettings}
Hypervisor Settings
identifier              {hypervisorsettings}
hypervisordebugtype     Serial
hypervisordebugport     1
hypervisorbaudrate      115200
Resume Loader Settings
identifier              {resumeloadersettings}
inherit                 {globalsettings}
I also enabled Fast Bios and ACHI Mode in my BIOS [along with enabling Secure Boot on UEFI mode], as well as tried to clear TPM and reinitialize it, but that didn't change anything. And thanks to your posts I had a look to C:\Windows\System32\Recovery\ReAgent.xml
but it does not seem to be populated with the any GUIDs:
<?xml version='1.0' encoding='utf-8'?>
<WindowsRE version="2.0">
<WinreBCD id="{24b2af92-fddf-11e1-bfa1-001377e67dbe}"/>
<WinreLocation path="\Recovery\WindowsRE" id="0" offset="254619418624" guid="{f2ebfdb1-aa8c-453d-9c40-68aed6c32395}"/>
<ImageLocation path="" id="0" offset="0" guid="{00000000-0000-0000-0000-000000000000}"/>
<PBRImageLocation path="" id="0" offset="0" guid="{00000000-0000-0000-0000-000000000000}" index="0"/>
<PBRCustomImageLocation path="" id="0" offset="0" guid="{00000000-0000-0000-0000-000000000000}" index="0"/>
<InstallState state="1"/>
<OsInstallAvailable state="0"/>
<CustomImageAvailable state="0"/>
<IsAutoRepairOn state="1"/>
<WinREStaged state="0"/>
<OperationParam path=""/>
<OsBuildVersion path="9600.16384.amd64fre.winblue_rtm.130821-1623"/>
<OemTool state="0"/>
<IsServer state="0"/>
<DownlevelWinreLocation path="\Recovery\WindowsRE" id="0" offset="1048576" guid="{f2ebfdb1-aa8c-453d-9c40-68aed6c32395}"/>
<IsWimBoot state="0"/>
<ScheduledOperation state="5"/>
</WindowsRE>
Nevertheless I have a ReAgent_Merged.xml1 file in that same folder, which contains:
<?xml version='1.0' encoding='utf-8'?>
<WindowsRE version="1.0">
    <WinreBCD id="{24b2af8c-fddf-11e1-bfa1-001377e67dbe}"/>
    <WinreLocation path="\Recovery\WindowsRE" id="0" offset="1048576" guid="{f2ebfdb1-aa8c-453d-9c40-68aed6c32395}"/>
    <ImageLocation path="\recovery\WindowsRE" id="0" offset="1048576" guid="{f2ebfdb1-aa8c-453d-9c40-68aed6c32395}"/>
    <OsInstallLocation path="\RecoveryImage" id="0" offset="231720616448" guid="{f2ebfdb1-aa8c-453d-9c40-68aed6c32395}" index="1"/>
    <CustomImageLocation path="" id="0" offset="0" guid="{00000000-0000-0000-0000-000000000000}" index="0"/>
    <InstallState state="1"/>
    <OsInstallAvailable state="1"/>
    <CustomImageAvailable state="0"/>
    <IsAutoRepairOn state="1"/>
    <WinREStaged state="0"/>
    <OperationParam path=""/>
    <OsBuildVersion path="9200.16384.amd64fre.win8_rtm.120725-1247"/>
    <OemTool state="0"/>
    <BootKey state="0"/>
    <IsServer state="0"/>
    <ScheduledOperation state="4"/>
</WindowsRE>
So I'm stuck, and any pointer would be greatly appreciated. :-/
Cheers,
Kwansetsu

Identify PXI system

I want to identify my PXI system and chassis. Upon right clicking "PXI
System(Unidentified)", which gives a list under "Identify As", what has
to be selected?. Should I select the External PC because I connect the
chassis to a PC. I have he NI PXIe 1065 chassis with a PXI 5661 and a
PXI 567x, and a PXI 5690 Pre-amplifier. Kindly advice.
Thanks,
prads

Hello,
Yes, please select External PC is you have your chassis connected to a PC via a MXI controller.
Samantha
National Instruments
Applications Engineer

Function control of the PXI system

Hi All!
We order NI PXI-1036DC + PXI-4462 + PXI-6682 GPS + PXI-6653 + PXI-8101.
Is it possible to control:
1. DC voltage and current?
2. GPS coordinates of the system?
3. Accuracy (or quality) of the 10 MHz clock disciplining by the 6682 GPS? It may be accuracy of the GPS positioning or number of satellites.
4. Temperature? It may be processor temperature.
Jury

Hello Jury,
Thank you for bringing this issue to the forums.
Regarding your questions:
1. What do you want to control the DC voltage and current of? Which card exactly?
2. I am not exactly sure what you mean by controlling the GPS coordinates of the system. Can you please explain further?
3. You can find the specifications of 10 MHz clock and accuracy of the GPS on page A-5 and A-6 of the PXI-6682 GPS Manual: http://www.ni.com/pdf/manuals/372292b.pdf
The 10 MHz clock accuracy is +/- 1 ppm, you cannot change this value. The accuracy of the GPS is within 15 ns, you cannot change this value as well. Once again all this information can be found on page A-5 and A-6 of the PXI-6682 GPS Manual.
About the number of satellites, the more satellites available to the receiver, the more precisely it can determine time and location. Therefore, the location of the antenna should be such that it will receive signals from the greatest number of satellites possible.
4. The +/- 1 ppm accuracy of PXI-6682 is specified in the range of 0 to 55 C.
Thank you,
Vimal Fernandez
Applications Engineer
National Instruments

What does the error message 'valid source cannot be identified' when trying to download acrobat read

I get the message 'valid source cannot be identified' when trying to download adobe acrobat. what should I do?

If it's Adobe Reader, download the full installer from http://get.adobe.com/reader/enterprise/
If it's Adobe Acrobat, post in the Acrobat forum.
If you are still having troubles with Adobe Reader, please specify your operating system & version.

PXI system cannot be identified by the PC

Similar Messages

Maybe you are looking for