PXIe 8108 Rebooting whenever i connected to Max

Hi,
Iam Using PXIe 1082 chassis and pxie8108 controller. Pxi system having Dual Mode boot configuration (Windows/Other os boot and Labview RT Boot).If i boot with windows then no problem it is detecting in Max. If i trying to boot in Labview RT, monitor which is connected with Pxi system shows the following message
Transferring Control to user program
Can't find suitable device for drive C
LabVIEW Real - Time Boot Loader
Build Time: Oct 22 2009 11:01:12
(C) Copyright 2002 - 2007 National Instruments Corporation
Error booting hard drive boot program.
Max system identification name:Ni - PXIe8108-2F12CD1D
LabVIEW Real-Time Single-Core Kernel found '2' CPU cores.
Consider installing NI RT Extensions for SMP (Multicore Support) module from MAX
Initializing network... Link Local IP address assigned.
Device 1 - MAC address:00:80:2f:12:cd:1d: - 169.254.103.152 (primary)
System state: No software installed
if i connect Pxi with other PC MAX then Pxi system is rebooting...
in above Pxi message it is showing" Error booting hard drive boot program". This is the problem for Pxi Reboot ?
Can any one help me to solve the issue...
Vijay

Hi Vijay,
I suspect that this issue is because your system does not contain an RT compatible partition for installing LabVIEW RT.
If your system is configured for dual booting Windows and RT, then you need to have two partitions on your disk, one for Windows (typically NTFS) and a second for LabVIEW RT (either FAT32 or Reliance).
Since you already have windows on the target, you should first boot into Windows and attempt to create a second FAT32 partition for RT if you have some unpartitioned space available on your disk (depending on the version of Windows, they may require 3rd party tools). Another option is to freshly install Windows on the disk using the NI-provided OS Recovery media, which has installation options for configuring a disk to support dual-boot Windows and RT.
As to your original issue as described I have forwarded on your problem internally for further investigation - in general simply lacking a formatted partition should not cause RT safemode to reboot. In your specific situation, however, it would still be best for you to configure the paritions from within Windows anyway instead of using the tool in MAX to ensure that the Windows partition is correctly preserved.
Cheers,
JoshH

Similar Messages

Issues when installing Windows XP on a PXI-8108 with a Solid State HDD

Hi,
I have been assisting a client with installing Windows XP onto a PXI-8108 controller. They have replaced the default HDD with a solid-state HD.
We have attempted to run the System Recovery CD. The recovery part works fine, ie. you select Acronis, it unzips all the files to C drive.
However when it gets up to the bit where Win XP Setup starts (after rebooting once the Recovery section completes), we have issues.
It can't find files, ie. dmconfig.dll, gm.dls, etc on the Win XP CD. When it tries to find mfc40u.dll, it came up with an error:
"The file Setup placed on your hard drive is not a valid Win XP System image. If you are installing from a CD, there may be a problem with the Windows XP CD."
We have tried two different recovery CDs, and we even tried just a plain Win XP CD. All had similar issues.
We have tried different SATA settings in the BIOS - both IDE AND AHCI.
It may just be that we have a faulty SSD, however it seemed to work ok when we had it connected to the PXI via USB (with the default HDD still in place). I was able to run diskcheck, which did not bring up any errors. Disk Management showed things were healthy.
So what I would like to know, is if there is any issue with a PXI-8108, and SSDs? We have successfully performed this operation a few months back using the same brand of SDD, but with a PXI-8104.
Any suggestions would be much appreciated!
Christopher Farmer
Certified LabVIEW Architect
Certified TestStand Developer
http://wiredinsoftware.com.au

This is more than likely a failing disk. SSDs don't always report failures in the same way as a rotating drive. Also, the tools that are helpful with diagnosing rotating drive failures don't always work with SSDs.
From the thread, it sounds like you have another system with this same SSD and it is working properly. Does that system have the same PXI Controller and Chassis?
I have seen these types of errors if the media for the OS installation is corrupt, but it sounds like you have tried different CDs.
I realize you have limited access to this drive, but here are my recommendations:
1) Put the failing SSD in a different system (desktop is preferable), and install a base version of XP. If this fails, RMA the drive, they normally have 3-5 warranties.
2) Run Crystal Mark Info and check for SMART failures:
http://crystalmark.info/software/CrystalDiskInfo/index-e.html
3) You can securely erase the SSD, which is not for the faint of heart. This will restore the drive to a new condition. If the drive has a bad cell which is causing data corruption during the OS install, securely erasing the drive will hopefully cause the firmware to map out the bad areas. This is a good tutorial, just ignore that fact that it is targeted at Intel drives.
http://www.iishacks.com/2009/06/30/how-to-secure-erase-reset-an-intel-solid-state-drive-ssd/
I hope this helps out,
Regards,
Andrew Mierau
Project Engineer - Servers & RAID Storage
National Instruments

Real-time 8.6 Remote panel connection exceeds max number of licenses- with no connections

I've been using the remote panel right along with no problems to connect to my Compact Fieldpoint. This morning I accidently opened the connection twice on the same computer and tripped the "Remote panel connection exceeds max number of licenses" error. Now it will not let me connect anymore from my computer. I've tried clearing cookies, cache and history in Internet Explorer and rebooting my computer. I've fired up the Remote Panel Connection Manager which shows no connections, and the NI License Information window does not show any connections which have been denied due to max # of clients being exceeded. Is there a way to reset this without having to reboot my RT controller? I'm running RT8.6 and LV 8.6 Full Dev System and understanding that it should come with 1 remote panel license.
Thanks
maat
LV2014

The boss wanted to see an updated feature, so I was forced to deploy a new version and reboot. Problem went away as I suspected it would.
I did manage to make the same mistake again this morning (launch the remote panel in 2 different MSIE windows) and after closing them both I could reconnect. Must be a glitch or a bug? It'd be interesting to see if anyone else has this problem. For now...solved, but it would be nice to see a way to fix this without rebooting.
Message Edited by maat on 10-22-2008 10:10 AM
maat
LV2014

Can i use PXIe-1073 with an embedded PXIe controller PXIe-8108

I have a PXI express chassis PXIe-1073 with an integrated controller MXI-Express controller PCIe-8361. I now want to use the chassis as a standalone system with an embedded controller.
(a)Can i use PXIe-1073 chassis with PXIe-8108 embedded controller
(b)Can i use a windows based laptop to control the PXIe-1073 via the PCIe-8361 integrated controller.

Hello kanad,
The PXIe-1073 is a MXI-integrate chassis. This means that the MXI card that would normally go into the controller slot (slot 1) is built into the chassis. The PCIe-8361 or Expresscard8360 are placed into the desktop or laptop, respectively, and connect to the chassis. The cards in the PXIe-1073 then appear as if they are part of the desktop of laptop.
Since the controller is built into the chassis, the PXIe-1073 does not have a slot 1. Controllers, such as the 8108 can only be plugged into slot 1. Therefore, the PXIe-1073 can only be controlled by the desktop or laptop MXI link. It cannot run standalone with an embedded controller.
Consider reading page 1-3 and 1-6 in the manual below:
NI PXIe-1073 User Manual and Specifications
Regards,
George T.
Applications Engineering Specialist
National Instruments UK and Ireland

PXI-8108

I am using NI PXI 8108 Embedded controller which is Windows 7 professional configured.When it is powered ON starting it shows following error,
"This error can be caused by unplugging a removable storage device such as an external USB drive while the device is in use, or by faulty hard ware such as a hard drive or CD-ROM drive that is falling make sure any removable storage is properly connected and then restart your computer.
if you continue to recevive this error message,contact the hardware manufacturer
file:\boot\BCD
status:0*c00000e9
info :unexpexted i/o error has occured."
when i try to install windows 7(32 bit professional) pxi system back up DVD ,after selecting one primary drive of size 120 GB,during installation sequence,following error is comming,
"Windows can not install required files make sure all files required for installation available and restart the installation.
Error code:0*8007045D"
any sugesstion for rectifing this error.

I believe on new controllers now there is a way to reinstall the factory image, via acronis. When you turn the computer on before windows starts i think there is a text prompt saying acronis loader press f4. Press f4 this will put you into the reimage the hardrive. Before doing this btw get all your data off
hope it helps
Please remember to accept any solutions and give kudos, Thanks
LV 8.6.1, LV2010,LV2011SP1, FPGA, Win7

ITunes "encounters" a problem whenever i connect my iPod

Hello.
I have a problem with iTunes. Whenever i connect my iPod to my computer, iTunes says: "iTunes has encountered a problem and needs to be shut down". This keeps me from synching my iPod and adding/or removing music from it, and it really is a pain! I have tried uninstalling it and installing it again. I've tried restarting my computer. None of the things I've tried has worked, and I haven't been able to find help on any other forums. The strange thing is that this problem seems to have occurred after I installed version 8.1. And by the way, I'm using Windows XP.
Any help wil be much appreciated,
Errol

First uninstall iTunes AND quicktime in control panel>add remove. Goto acer web site and download any patches and updates they offer, especailly for iTunes issues for your model.
Now disable any antivirus programs and security programs and things then goto apple.com and download/install the latest version of iTunes, don't install what came with your iPod on CD for its likly outdated by now anyways. When its done installing, reboot the PC

PXIe-8108 GPIB

Bonjour,
Pour une configuration client nous utilisons un chassis PXIe avec un controlleur PXIe-8108.
Sur ce contolleur il y a un connecteur GPIB.
Nous utilisons ce chassi avec un PC maitre via connexion ethernet.
Je souhaiterai, via le PC, piloter les appareils qui sont branchés sur le chassis PXI en GPIB.
Sur le PC via MAX dans la partie systeme déporté je visualise bien mon chassis PXI. Je vois qu'il y a un controle GPIB mais je ne peux lancer VISA pour interoger les appareils.
Du côté systeme->périphériques et interfaces, il n y a rien du tout permettant une communication GPIB.
Y'a t il un driver spécifique à installer sur le châssis, ou le PC, permettant la communication avec un appareil via le controlleur GPIB du PXI?
Cdlt

Bonjour CindyF,
Le driver NI-488.2 est déjà installé.
Je joins une capture ecran MAX de la config PC et châssis PXI.
Cdlt,
Pièces jointes :
logiciel MAX.png ‏123 KB
MAX 2.png ‏226 KB

Restore iphone 4 to install the ios 5 but something went wrong while doing back up and whenever i connect the phone to itunes theres an error and the phone turn off after 1min

hi guys i just downloaded the ios 5 and while it was doing back up something went wrong and everything were stopped and shows me a message as an error msg and now whenever i connect my iphone 4(32g) to itunes after 1min it goes off and the battery full and the same thing happend again and again can u help me guys plz i only see connect to itunes on the screen no options even

by reset option do you mean the DFU restore? worked for me, have you tried that?
if not - hold the lock and home button until the power down bar comes up. then hold the lock button for ten seconds - next continue to hold the lock button and press the home button for ten seconds - next release the lock button and hold the home button for 10 seconds. this should be done with the phone tethered. If done right and your itunes is configured as such, the phone will reload the drivers and start up itunes, and then prompt for a restore/update.

Songs greyed out whenever I connect my iPod to iTunes?

I own an iPod touch 4G. The problem I'm having is whenever I connect my iPod to iTunes, a certain 6 songs show up as "greyed out" and are listed as the most recently added songs. It's not a huge problem but it's bothersome. One of the songs, "Survival" by Muse is on my iPod, the exact same version I purchased and it is not greyed out and I can play it normally. The other songs I don't have on my iPod (not from their respective albums at least, but from a compilation I purchased). They do not show up greyed out on my iPod music, just on iTunes under Music under my iPod name. I don't know why these 6 songs show up greyed out, there's no reason they should. Please help me get rid of this so I don't have to deal with it again!

Try a new cable and different USB port
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.

Whenever I connect my iPad 2 to my PC, then open iTunes, I get an error message telling me that iTunes has encountered an error and needs to close.

I recently updated my iPad 2 to iOS 5 beta 2 and updated iTunes to the second beta. Now whenever I connect my iPad toitunes,it instantly pops up with an error message saying "iTunes has stopped working. A problemcaused the program to stop working correctly. Please close the program." iTunes still mdetects my other two iPhones and iPod touch on 3.1.3, 4.1, and 4.2.1. Also, iTunes will recognize my iPad just fine on the administrator account.

You are using ADE on Windows or Mac ? and their versions ??
Please restart your machine and try once again.
Thanks

My phone is stuck on apple screen and i've tried to reboot it and connect it to my computer many times but it doesn't work. Can anybody help me?

My phone is stuck on apple screen and i've tried to reboot it and connect it to my computer many times but it doesn't work. Can anybody help me?

This is covered in the basics section of the manual:
iPhone User Guide (For iOS 5.0 Software)

HT2480 whenever i connect my iphone to pc while syncing mail in itunes a pop up" the connection is not available.outlook must be online or connected to complete this action" please suggest me to solve this or bisable.

whenever i connect my iphone to pc while syncing mail in itunes a pop up" the connection is not available.outlook must be online or connected to complete this action" please suggest me to solve this or bisable.

Cached exchange mode was already marked so that was not the issue.
I have done all the usual of creating a new profile, reinstalling Outlook etc but nothing seemed to work. I also tried going back to Outlook 2007 and reinstalling Windows but same problem.
However, I am not sure if it is connected but I was useing the option in MS Live Sync to synchronise Office settings which I turned off recently and now no longer have the issue. Unfortunately I cannot remember when in the process I did this so cannot be
sure it was responsible - anyone else found this?

I recently updated my Ipod Touch to the ios 6 and now, i cant seem to use it with my itunes! A notification keeps coming up whenever i connect my ipod to itunes that a new version of itunes is required but it is the latest version alrdy. HELP!

Hi all, I've recently updated my ipod touch to the ios 6 and now i cant seem to use it with my itunes
whenever i connect my ipod to itunes, a notification saying that i need a newer version of itunes. However, when i check itunes for software updates, it seems i have the current version of itunes
I am at a lost of what to do as i can no longer sync my ipod touch with my itunes.
Help Pls!
thanks

You might tell us many more things so we don't have to guess and might be able to help.
What computer do you have?
What iTunes are you running now?
What OS X system are you running are your computer now? Or is this a Windows machine?
Let us know a little more info.

Good day. as I can do to update my iphone 4 to the latest version of ios 5. whenever you connect to the pc and try to update the waiting time is very long, sometimes up to 12 hours and despite the wait always produce an error message for a long time waiti

good day. as I can do to update my iphone 4 to the latest version of ios 5. whenever you connect to the pc and try to update the waiting time is very long, sometimes up to 12 hours and despite the wait always produce an error message for a long time waiting

Disable ALL security software (firewall, antivirus/spyware, etc.) running on your PC while updating.

Whenever I connect my iPhone 4s to my Windows 8.1 pc with iTunes 10.6.3.25, the iTunes freezes.

Whenever I connect my iPhone 4s to my Windows 8.1 pc with iTunes 10.6.3.25, the iTunes freezes and the only way to proceed is to kill the task under task manager. I have uninstalled iTunes following the recommended order and reinstalled numerous times but still freezes when I connect my iPhone. It works fine when I connect my phone to another pc (Windows 7). What else can I try?

Whenever I update iTunes it gives me the following error:
The application was unable to start correctly (0cx0000142). Click Ok to close the application.
The file in error is DifXInst64.exe.
Thanks for any more help available.

PXIe 8108 Rebooting whenever i connected to Max

Similar Messages

Maybe you are looking for