PXIe 8133 Real Time Configuration Issue with MAX

I seem to be running to a weird problem in configuring a PXIe 8133 into an RT system. After I change it in bios to boot safe mode, MAX detects the system no problem through remote connection. When I try to change its IP (while the PXIe8133 is in Safe Mode), it does not allow me to do so. Specifically, the text on top of Network Settings Tab mentions that it cannot apply the settings. I also have tried reformating the RT, and uploading software. The format performs OK, but still the same problem with IP and communication. The software upload results in communication timeout.
I am not running any firewalls, etc. The link is direct cable between the host and the target (PXIe8133). I am running LV2010 RT on the host.
If I am missing a simple step in getting through this obstacle, please let me know. Any suggestions are apreciated. Thanks in advance.
Peter

Hello,
Just wondering are you using DHCP or static IP addressing? If you are using static IP, ensure you have all the fields on the 'Network Settings Tab' populated including the Gateway and DNS server. Both fields can be populated with the address 0.0.0.0. Hope this helps.
Best,
National Instruments
Applications Engineer

Similar Messages

  • Video Output for PXI Embedded Real-Time Controller ?

    I plan to purchase a PXI Embedded Real-Time Controller for security monitoring.
    Is it possible to use the video output of a PXI Controller running RTOS to display messages from a LabVIEW RT application ? According to the documentation, it seems that the use of the video output is only possible for PXI Controllers running Windows XP.
    Does it exist a specific application to do this with LabVIEW RT ?
    Thanx.
    H.L.
    Solved!
    Go to Solution.

    Hi Yann,
    The situation seems a bit confusing as in the link you've given above using the local monitor from a pxi labview rt system as the HMI without a pc attached, two messages (here and here) say that it is possible to display an image on the video output of a PXI RT controller using a function of the NI-IMAQ librarey (namely, the IMAQ RT Video Out VI) !
    I have the NI-IMAQ library but no PXI controller to test if this solution should work or not
    Does anyone have the answer ?
    Thanx,
    H.L.

  • Real time configurations for derivation types in COPA

    We have taken the sample operating concern by going thru the path
    < IMG Activity: Controlling - operating concern - sap operating concern template >, the Quickstart S-GO operating concern template>
    and configured the following derivation types by looking at the examples:
    - Derivation rule
    - Table lookups
    - Moves
    - Clear
    -Customer Enhancement
    Also, it would be great if some one could provide me with real time configuration of the derivation types in COPA
    Moderator: Please, read the rules of the forum before posting

    Hi Praveen
    Rec Type for Variance transactions is already fixed i.e. C and cant be changed....
    You can use Z rec types in KE21N for manual postings/adjustments.... Or during external data transfer
    If you can be specific on your requirement, we can discuss further using Exit COPA0002 or 0005... But for standard transactions, you cant change the rec types
    Br, Ajay M

  • Real time critical issues in  Implementation Project

    Hi friends
    Please send  me the *Real time critical issues in  Implementation and Development  Projects*
    Thanks
    Srikanth Reddy.P

    Hi
    Blue Print: Assume the client is already having sound legacy system in place.
    Also assume that all the processes in FICO are neatly documented with visios.
    Now study those process flows and prepare a list of sub processes.
    Now prepare the fits/gaps/ assessment.
    If the process fits into SAP it would be a fit. If an enhancement / modification is required, it goes into the red column.
    Record all the discussions with the core users against each process and sub process.
    Also list down the dependencies for each process / analyse the integration aspects.
    Also plan how you would convert the legacy data into SAP.
    The whole document should have illustrations / scenarios and ultimately signed off. This at any cost should not be changed unless, there is a total turnaround in the process requirements.
    With the finalised blue print, you could start the activities in the implementation.
    Now regarding the interview questions:
    - Starts with your resume. How you have projected yourself. Have you shown real time experience or faked up projects. In any case, it is very easy to make out whether you have experience in implementation or support environment. You could never fool the interviewer.
    Initially the interviewer would try to make an assessment on your genuinity.
    - When did the implementation start?
    - When did it GOLIVE?
    - Were you involved in the end to end implementation or was it a partial role?
    -If you are supporting the client, who implemented SAP?
    - What tool do you use to track the support activities?
    - How many tickets have you handled so far?
    - Name some critical issues which you resolved and without which the production or business got affected?
    - What is the system landscape ?
    -Have you developed any reports / enhancements / technical / functional designs?
    - Are you aware of interfaces / ALE / IDOCs ?
    - Are you aware of SLAs
    - Rate yourself on a rank of 1 to 10 in FI and CO
    - How often have you interacted with client during implementation / support?
    - What process designs have been prepared by you?
    - How do you react when you get a critical issue or cross modular issues?
    And so on and on
    Hope this helps

  • The Java plugin has created a time unfriendly issue with my e-mail account, I can not open or send any e-mail without using this plugin, how can I eliminate this problem without dropping m. firefox?

    A few days ago I tried to e-mail a friend, when I started A box came up and it required me to add a plugin..Java. I contacted my e-mail courier and microsoft, they told me that is was a plugin from Mozilla Firefox. Since then I must go through Java to send or open an e-mail... this is NOT to my satisfaction, it takes too long for all of this to open and if it is not cleared , I am dropping Mozilla and going elsewhere. Why has this occurred? Is this a result of the last update? If so can I delete the last update and continue on the other version?
    == This happened ==
    Every time Firefox opened
    == last week

    Sorry, I have no idea what you mean by '''"The Java plugin has created a time unfriendly issue with my e-mail account, I can not open or send any e-mail without using this plugin,"'''.
    If you think your problem is caused by the Java plugin, you should visit the Java support forum for assistance.
    http://forum.java.sun.com/index.jspa
    If you could explain what you mean by '''"time unfriendly''' issue with my e-mail account", maybe we'll be able to help you solve that issue.
    It might be helpful for us if we knew exactly which web-mail provider you are using. It seems strange to me that viewing or sending web-mail would actually "need" Java for operation, its more likely that some other item on the web page needs Java to run some advertising or other garbage that isn't a necessary part of the web-mail functionality you want to use.

  • Time Zone issue with 7.0 and DB2

    Hi,
    We are having a time zone issue with weblogic server 7.0 and DB2 database. I would really appreciate if somebody provides a solution for this issue.
    Our db2 DB is located in PST time zone and weblogic server is located in EST time zone.
    When we access current timestamp from db2, we are getting PST time converted to EST and EST time zone attached with timestamp value.
    I tried to use resultset.getTimeStamp (1,<calendar>), unfortunately this method is not supported in the DB2 driver version I am using.
    We want to get same value as returned by db2 with db2 time zone not weblogic server time zone.
    And also when we add new record with timestamp column through web service, regardless the time zone value sent by web service client ".Net" ,
    Weblogic server converts the java.util.Date value to weblogic time zone and stores in the db.
    For example, client sent 17:00 hours CST, but when it gets stored in db through weblogic ws, weblogic converts 17:00 to 18:00 EST and stores in database as 18:00 hours without any time zone. When we read this value back, we are getting it 18:00 EST only not 17:00 CST.
    This is fine as long as writing and reading by same weblogic server. If another weblogic server instance in PST time zone read this value, it takes as 18:00 PST.
    Due to this our application always shows timestamp hours differently.
    Could some body help me to fix this problem, we are getting this problem in production after we moved our DB2 location to different time zone.
    Thanks
    Balaji

    Hi,
    Check whether document in the link below is of any use for you..
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CAGTFTIM/CAGTFTIM.pdf
    Regards
    K.M.Arun

  • Where we get real time XML publisher with neat explanation

    hi every one
    where we get real time XML publisher with neat explanation for oracle apps

    Why XML Publisher Reports Why NOT Traditional Oracle Reports?
    Oracle Applications, SQL, PL/SQL: Why XML Publisher Reports Why NOT Traditional Oracle Reports?
    Developing XML Publisher Report - using Data Source as PL/SQL Stored Procedure
    Oracle Applications, SQL, PL/SQL: Developing XML Publisher Report - using Data Source as PL/SQL Stored Procedure
    Developing XML Publisher Report - Using Data Template as Data Source
    Oracle Applications, SQL, PL/SQL: Developing XML Publisher Report - Using Data Template as Data Source
    Regards,
    Srini

  • Dear Apple, Have you fixed the 'Time out' issue with airport? It now happens to me 2-3 times a day for the past 6 months. Answers please.

    Dear Apple, Have you fixed the 'Time out' issue with airport? It now happens to me 2-3 times a day for the past 6 months. Answers please.

    We're not Apple - these boards are user-to-user.
    Your profile says 10.7.3 - try applying the 10.7.5 combo update.

  • Configuration Issue with my Cisco 871 Router

    Hi all,
    I am a newbie to the Cisco IOS.
    I got a Cisco 871 Router that I'd like to use for internet connection. My LAN network is 192.168.1.0/24 and the ISP has assigned us the IP 41.212.79.108/24 and gateway 41.212.79.1.
    With my current configuration, I can hit the router - 192.168.1.1 - and it's WAN port - 41.212.79.108 - but not the gateway.
    Below is my current config:
    Hoggers#show config
    Using 4414 out of 131072 bytes
    version 12.4
    no service pad
    service timestamps debug datetime msec
    service timestamps log datetime msec
    no service password-encryption
    hostname Hoggers
    boot-start-marker
    boot-end-marker
    logging buffered 51200 warnings
    enable secret 5 **********************.
    no aaa new-model
    crypto pki trustpoint TP-self-signed-568493463
    enrollment selfsigned
    subject-name cn=IOS-Self-Signed-Certificate-568493463
    revocation-check none
    rsakeypair TP-self-signed-568493463
    crypto pki certificate chain TP-self-signed-568493463
    certificate self-signed 01 nvram:IOS-Self-Sig#7.cer
    dot11 syslog
    ip cef
    no ip dhcp use vrf connected
    ip dhcp excluded-address 10.10.10.1
    ip dhcp excluded-address 192.168.1.1
    ip dhcp excluded-address 192.168.1.2
    ip dhcp excluded-address 192.168.1.3
    ip dhcp excluded-address 192.168.1.4
    ip dhcp excluded-address 192.168.1.5
    ip dhcp excluded-address 192.168.1.6
    ip dhcp excluded-address 192.168.1.7
    ip dhcp excluded-address 192.168.1.8
    ip dhcp excluded-address 192.168.1.9
    ip dhcp excluded-address 192.168.1.10
    ip dhcp excluded-address 192.168.1.100
    ip dhcp excluded-address 192.168.1.90
    ip dhcp pool ccp-pool
       import all
       network 10.10.10.0 255.255.255.248
       default-router 10.10.10.1
       lease 0 2
    ip dhcp pool LANPOOL
       network 192.168.1.0 255.255.255.0
       default-router 192.168.1.1
       dns-server 41.212.3.2 41.212.3.253
    ip domain name yourdomain.com
    ip name-server 41.212.3.2
    ip name-server 41.212.3.253
    archive
    log config
      hidekeys
    interface FastEthernet0
    interface FastEthernet1
    interface FastEthernet2
    interface FastEthernet3
    interface FastEthernet4
    description Wan to Outside World
    ip address 41.212.79.108 255.255.255.0
    duplex auto
    speed auto
    interface Vlan1
    description $ETH-SW-LAUNCH$$INTF-INFO-HWIC 4ESW$
    ip address 192.168.1.1 255.255.255.0
    ip tcp adjust-mss 1452
    ip forward-protocol nd
    ip route 0.0.0.0 0.0.0.0 41.212.79.1
    ip http server
    ip http access-class 23
    ip http authentication local
    ip http secure-server
    ip http timeout-policy idle 60 life 86400 requests 10000
    ip dns server
    ip nat inside source static tcp 192.168.1.31 80 interface FastEthernet4 80
    access-list 23 permit 10.10.10.0 0.0.0.7
    no cdp run
    control-plane
    scheduler max-task-time 5000
    end
    I'll appreciate any light you can shed on what am missing.

    2 wireless routers can not communicate wirelessly with each other.
    You need to connect cable between 2 routers and use the second wireless router as access point.
    Follow this link to connect Linksys router to another router.
    Some of your devices are getting same IP address. This might be the issue with DHCP server of the router. You can try DHCP reservation on the router so that each device will get unique IP address.

  • How to create a c++ shared library (.so) for linux real time (for myRio) with Eclipse to use in LabView?

    I tried already these Tutorials and Advices but I didn't find a solution:
    - http://www.ni.com/tutorial/14625/en/
    - http://www.ni.com/tutorial/14690/en/
    - http://forums.ni.com/t5/LabVIEW/Shared-Library-on-myrio-Linux-Real-time-system/m-p/2842540/
    - http://forums.ni.com/t5/LabVIEW/How-to-create-shared-library-for-linux-real-time-target-in/m-p/28218...
    - and some more
    I want use c++ codes on linux real time. For testing reasons I want to have a function that adds 2 values and gives the result.
    I've done these steps:
    1. writing a c++ file in Eclipse (see screensot 2)
    2. building a shared library (.so) from my c++ project in Eclipse (with Cross GCC)
    3. putting this file on myRio (path: /usr/local/lib/)
    4. creating a VI that calls this library from Labview with a "Call Library Function Node" (see screenshot3)
    5. Setting the properties for the "Call Library Function Node" (see screenshots 4-7)
    After I run this VI i get this error message: LabVIEW:  (Hex 0x627) The function name for the ... node cannot be found in the library. To correct this error, right-click the Call Library Function Node and select Configure from the shortcut menu. Then choose the correct function name. (see screenshot1)
    I've tried a lot things to solve this problem but I couldn't find a solution. Would be very happy if anyone can help me. I guess that I have to edit my c++ code to export my function (symbol). But I have no idea how to make it. I also tried it with a dll file in the same folder but it didn't help.
    Perhaps someone can send an example which works on myRIO.
    Thanks!
    screenshot1
    screenshot2
    screenshot3
    screenshot4
    screenshot5
    screenshot6
    screenshot7

     can see it in the screenshot8 there is a function called "_Z8AddierenddPd" instead of "Addieren". I copied this name to Labview (see screenshot9) and it worked.
    I'm sure that there is a way to compile the shared folder with gcc without decorations (mangling). But I don't know how. If someone has a recommendation I would be very glad!
    Prepend each function declaration that you want to be available without name decoration with
    extern "C" <your function declaration>
    Or if you have multiple functions you want to export you can in the header file where you declare your functions simply use:
    #ifdef __cplusplus
    extern "C" {
    #endif
    <all your function declarations>
    #ifdef __cplusplus
    #endif
    Rolf Kalbermatter
    CIT Engineering Netherlands
    a division of Test & Measurement Solutions

  • No real time RAM preview with Pr CS6.0.1 Open, Real time RAM preview with Pr Closed

    When Premiere is closed I see real time performance on RAM previews (29.97fps), smooth UI interaction with and without Fast Draft enabled.  When Premiere is opened I get poor fps in RAM previews, lagging UI interaction unless Fast Draft is enabled.  Premiere Memory preferences are set to 6GB reserved for other apps, and Optimized rendering is for Memory.  It seams that as soon as Pr takes on any processing AE's performance just dies until Pr is closed. 
    I've tried clearing caches in AE and in Premiere, restarts, and repair disk permissions,
    Included is a realtime screen capture of what i'm experiencing, I open and close premiere twice to illustrate that it's not an isolated occurrence.
    any ideas?
    System Specs:
    dual 2.26ghz quadcore MacPro4.1
    OSX 10.7.4
    32gigs RAM,
    4000 for Mac.
    CUDA 4.2.10, GPU driver 1.3.4.0. 
    Cache drive is a 2TB RAID 0 with 250MB/sec
    Media is on RAID 6 with 600+MB/sec.
    Premiere Pro CS6.0.1
    After Effects CS6.0.1

    I tried the same thing on my MacBook Pro and there was no issue.  Here's my specs:
    Processor  2.4 GHz Intel Core i7
    Memory  8 GB 1333 MHz DDR3
    Graphics  AMD Radeon HD 6770M 1024 MB
    Software  Mac OS X Lion 10.7.4 (11E53)
    I'd suggest:
    Submit bugs to http://www.adobe.com/go/wish . More on how to give feedback: http://bit.ly/93d6NF

  • Configuration issue with Response processor

    Please assist with my issue
    I am having the following issue with
    ALPPIM module: Response Processor
    Current system time is 17-FEB-2010 10:00:30
    wferr:
    - 2008: Could not open unprocessed mail folder.
    - 2106: Could not open folder '&FOLDER'. NAME=/apps11510/prod/prodappl/alr/11.5.0/resource/REVIEWED_PARSING
    - 2207: Mail service could not open folder.
    - 207: Could not open file '/apps11510/prod/prodappl/alr/11.5.0/resource/REVIEWED_PARSING'.

    Hello guys,
    Thought i'd provide an update on my status.
    The unix team came back to us saying that IMAP server is NOT installed in these environments at all.
    So i little research on my part brought me across
    How To Configure The Workflow Java Mailer Without An IMAP Account (Assumes No Inbound Processing) [ID 268274.1]
    Using the above metalink note above i configured and started the mailers and everything is running fine as expected.
    So thanks again for the help guys.
    However before i started the mailers i had around a million messages in ready state under the queue WF_DEFFERED,
    after the mailers were started this number gradually came down but is now stuck at 3000.
    Now i am just wondering why these 3000 messages didnt clear up like the rest.
    Another thing that i noticed is that agent listener
    "Workflow Deferred Agent Listener" has a system deactivated status because of 'Maximum number of errors occured'
    however i could not understand what were the errors that occured maximum number of times.
    The following is from 'Workflow Deferred Agent Listener' log
    LOG_ID_UNKNOWN : oracle.apps.fnd.cp.gsc.Logger.Logger(String, int) : Logging to System.out until necessary parameters are retrieved for Logger to be properly started.
    LOG_ID_UNKNOWN : oracle.apps.fnd.cp.gsm.GSMSvcComponentContainer.initializeStateMachine() : BEGIN
    LOG_ID_UNKNOWN : oracle.apps.fnd.cp.gsc.SvcComponentContainer.getNewWorkflowContext() : BEGIN
    LOG_ID_UNKNOWN : oracle.apps.fnd.cp.gsc.SvcComponentContainer.getNewWorkflowContext() : BEGIN
    LOG_ID_UNKNOWN : oracle.apps.fnd.cp.gsc.SvcComponentContainer.loadGlobalParameters() : BEGIN
    LOG_ID_UNKNOWN : oracle.apps.fnd.cp.gsm.GSMSvcComponentContainer.loadContainerParameters() : BEGIN
    LOG_ID_UNKNOWN : oracle.apps.fnd.cp.gsc.SvcComponentContainer.start() : Successfully retrieved global and container parameters
    LOG_ID_UNKNOWN : oracle.apps.fnd.cp.gsc.SvcComponentContainer.validateParameterValues(Properties) : BEGIN
    LOG_ID_UNKNOWN : oracle.apps.fnd.cp.gsc.SvcComponentContainer.validateParameterValues(Properties) : ({SVC_COMP_MAX_ERROR_COUNT=10, SVC_COMP_MONITOR_LOOP_SLEEP=60, SVC_CONTAINER_LOOP_SLEEP=10, SVC_CONTAINER_READ_TIMEOUT=10, SVC_COMP_MONITOR_ONDEMAND_FREQ=300, SVC_CONTAINER_LOG_LEVEL=4, SVC_WRITE_DIAG_TO_GSM_LOG=Y})
    LOG_ID_UNKNOWN : oracle.apps.fnd.cp.gsc.SvcComponentContainer.start() : Successfully validated container parameters
    LOG_ID_UNKNOWN : oracle.apps.fnd.cp.gsm.GSMSvcComponentContainer.loadDetails(Connection) : BEGIN (oracle.jdbc.driver.OracleConnection@19e8f17)
    LOG_ID_UNKNOWN : oracle.apps.fnd.cp.gsc.SvcComponentContainer.start() : Successfully retrieved container details
    LOG_ID_UNKNOWN : oracle.apps.fnd.cp.gsm.GSMSvcComponentContainer.startLogger() : BEGIN
    LOG_ID_UNKNOWN : oracle.apps.fnd.cp.gsc.SvcComponentContainer.startLogger() : BEGIN [default implementation]
    SVC-GSM-WFALSNRSVC-149706-10002 : oracle.apps.fnd.cp.gsc.Logger.Logger(String, int) : Logging to System.out until necessary parameters are retrieved for Logger to be properly started.
    SVC-GSM-WFALSNRSVC-149706-10022 : oracle.apps.fnd.cp.gsc.Logger.Logger(String, int) : Logging to System.out until necessary parameters are retrieved for Logger to be properly started.
    SVC-GSM-WFALSNRSVC-149706-10003 : oracle.apps.fnd.cp.gsc.Logger.Logger(String, int) : Logging to System.out until necessary parameters are retrieved for Logger to be properly started.
    SVC-GSM-WFALSNRSVC-149706-10004 : oracle.apps.fnd.cp.gsc.Logger.Logger(String, int) : Logging to System.out until necessary parameters are retrieved for Logger to be properly started.
    SVC-GSM-WFALSNRSVC-149706-10002 : oracle.apps.fnd.cp.gsc.Logger.Logger(String, int) : Logging to System.out until necessary parameters are retrieved for Logger to be properly started.
    ,5,main]:0:-1:sun-ofs:10.84.34.23:-1:-1:EXCEPTION:[SVC-GSM-WFALSNRSVC-149706 : oracle.apps.fnd.cp.gsc.SvcComponentContainer.start()]:Successfully named container session (took logical lock)
    [Dec 6, 2011 10:41:56 AM EST]:1323186116207:Thread[main,5,main]:0:-1:sun-ofs:10.84.34.23:-1:-1:EXCEPTION:[SVC-GSM-WFALSNRSVC-149706 : oracle.apps.fnd.cp.gsc.SvcComponentContainer.start()]:Successfully started the Component Monitor thread
    [Dec 6, 2011 10:41:56 AM EST]:1323186116235:Thread[ComponentMonitor,5,main]:0:-1:sun-ofs:10.84.34.23:-1:-1:EXCEPTION:[SVC-GSM-WFALSNRSVC-149706 : oracle.apps.fnd.cp.gsc.SvcComponentMonitor.performInit()]:Successfully initialized -> SvcComponentMonitor{Processor{mThread=Thread[ComponentMonitor,5,main],mCurrentLoopSleep=0,mMinLoopSleep=60,mMaxLoopSleep=0,mReadTimedOutFlag=false,mCurrentErrorCount=0,mMaxErrorCount=-2147483648,mErrorLoopSleep=60,mErrorFlag=false,mControlEvent=noEvent,mStopFlag=false,mSuspendFlag=false,mLastSuspendFlag=false},mCurrentLoopCount=4,mOnDemandLoopCount=5}
    [Dec 6, 2011 10:41:56 AM EST]:1323186116236:Thread[ComponentMonitor,5,main]:0:-1:sun-ofs:10.84.34.23:-1:-1:EXCEPTION:[SVC-GSM-WFALSNRSVC-149706 : oracle.apps.fnd.cp.gsc.Processor.run()]:Processor has successfully been initialized. Loop will now start.
    [Dec 6, 2011 10:41:56 AM EST]:1323186116263:Thread[main,5,main]:0:-1:sun-ofs:10.84.34.23:-1:-1:EXCEPTION:[SVC-GSM-WFALSNRSVC-149706 : oracle.apps.fnd.cp.gsc.SvcComponentContainer.start()]:Successfully started the state machine
    [Dec 6, 2011 10:41:56 AM EST]:1323186116266:Thread[GSMQueueProcessor,5,main]:0:-1:sun-ofs:10.84.34.23:-1:-1:EXCEPTION:[SVC-GSM-WFALSNRSVC-149706 : oracle.apps.fnd.cp.gsc.Processor.run()]:Processor has successfully been initialized. Loop will now start.
    [Dec 6, 2011 10:41:56 AM EST]:1323186116284:Thread[main,5,main]:0:-1:sun-ofs:10.84.34.23:-1:-1:EXCEPTION:[SVC-GSM-WFALSNRSVC-149706 : oracle.apps.fnd.cp.gsc.SvcComponentContainer.start()]:Successfully started the container -> SvcComponentContainer{mComponentControlWorkflowContext=[oracle.apps.fnd.wf.apps.WorkflowContext@1a7508a $Revision: 115.178 $ extends [oracle.apps.fnd.common.Context@1a7508a $Revision: 115.44 $  {sessionId=0x1a7508a,conn=oracle.jdbc.driver.OracleConnection@1acd47}] {isDedicated=false}],mComponentMonitor=SvcComponentMonitor{Processor{mThread=Thread[ComponentMonitor,5,main],mCurrentLoopSleep=0,mMinLoopSleep=60,mMaxLoopSleep=0,mReadTimedOutFlag=true,mCurrentErrorCount=0,mMaxErrorCount=-2147483648,mErrorLoopSleep=60,mErrorFlag=false,mControlEvent=noEvent,mStopFlag=false,mSuspendFlag=false,mLastSuspendFlag=false},mCurrentLoopCount=5,mOnDemandLoopCount=5},mStateMachine=[email protected]c2,mLogger=Logger{mLog=[$Header: AppsLog.java 115.76 2004/07/27 17:30:17 kkapur ship $ @5807702 {oracle.apps.fnd.profiles.ExtendedProfileStore@3411a}],mUniqueId=SVC-GSM-WFALSNRSVC-149706,mLevel=4},mParameters={SVC_COMP_MAX_ERROR_COUNT=10, SVC_COMP_MONITOR_LOOP_SLEEP=60, SVC_CONTAINER_LOOP_SLEEP=10, SVC_CONTAINER_READ_TIMEOUT=10, SVC_COMP_MONITOR_ONDEMAND_FREQ=300, SVC_CONTAINER_LOG_LEVEL=4, SVC_WRITE_DIAG_TO_GSM_LOG=Y},mProcessId=149706,mType=GSM,mName=WFALSNRSVC,mComponents={},mAutomaticComponentErrorCounts=null,mEventSubscriptions=[oracle.apps.fnd.wf.bes.Subscription@1e228bc, oracle.apps.fnd.wf.bes.Subscription@e06940, oracle.apps.fnd.wf.bes.Subscription@11e0c13, oracle.apps.fnd.wf.bes.Subscription@1aae94f, oracle.apps.fnd.wf.bes.Subscription@1bb5c09]}
    [Dec 6, 2011 10:41:56 AM EST]:1323186116560:Thread[ComponentMonitor,5,main]:0:-1:sun-ofs:10.84.34.23:-1:-1:EXCEPTION:[SVC-GSM-WFALSNRSVC-149706 : oracle.apps.fnd.cp.gsc.SvcComponentMonitor.startAutomaticComponents()]:Starting automatic component 10002
    [Dec 6, 2011 10:41:56 AM EST]:1323186116815:Thread[ComponentMonitor,5,main]:0:-1:sun-ofs:10.84.34.23:-1:-1:EXCEPTION:[SVC-GSM-WFALSNRSVC-149706 : oracle.apps.fnd.cp.gsc.SvcComponentMonitor.startAutomaticComponents()]:Starting automatic component 10003
    [Dec 6, 2011 10:41:56 AM EST]:1323186116848:Thread[ComponentMonitor,5,main]:0:-1:sun-ofs:10.84.34.23:-1:-1:EXCEPTION:[SVC-GSM-WFALSNRSVC-149706 : oracle.apps.fnd.cp.gsc.SvcComponentMonitor.startAutomaticComponents()]:Starting automatic component 10004
    [Dec 6, 2011 10:41:56 AM EST]:1323186116883:Thread[ComponentMonitor,5,main]:0:-1:sun-ofs:10.84.34.23:-1:-1:EXCEPTION:[SVC-GSM-WFALSNRSVC-149706 : oracle.apps.fnd.cp.gsc.SvcComponentMonitor.startAutomaticComponents()]:Starting automatic component 10005
    [Dec 6, 2011 10:41:56 AM EST]:1323186116915:Thread[ComponentMonitor,5,main]:0:-1:sun-ofs:10.84.34.23:-1:-1:EXCEPTION:[SVC-GSM-WFALSNRSVC-149706 : oracle.apps.fnd.cp.gsc.SvcComponentMonitor.startAutomaticComponents()]:Starting automatic component 10022
    [Dec 6, 2011 10:41:56 AM EST]:1323186116950:Thread[ComponentMonitor,5,main]:0:-1:sun-ofs:10.84.34.23:-1:-1:EXCEPTION:[SVC-GSM-WFALSNRSVC-149706 : oracle.apps.fnd.cp.gsc.SvcComponentMonitor.startAutomaticComponents()]:Starting automatic component 10023
    [Dec 6, 2011 10:41:57 AM EST]:1323186117275:Thread[BES Dispatch Thread,5,main]:0:-1:sun-ofs:10.84.34.23:-1:-1:EXCEPTION:[SVC-GSM-WFALSNRSVC-149706 : oracle.apps.fnd.cp.gsc.SvcComponentContainer.onBusinessEvent(BusinessEvent)]:(BusinessEvent{name=oracle.apps.fnd.cp.gsc.SvcComponent.start, key=SVC:06-DEC-2011, priority=50, correlationId=null, sendDate=Tue Dec 06 10:41:56 EST 2011, receiveDate=null, From Agent:  , To Agent:  , Last Subscription=  , Error Message=null, Error Stack=null, [email protected], COMPONENT_ID=10002, CONTAINER_PROCESS_ID=149706, CONTAINER_TYPE=GSM, BES_PAYLOAD_OBJECT=false})
    [Dec 6, 2011 10:41:57 AM EST]:1323186117287:Thread[BES Dispatch Thread,5,main]:0:-1:sun-ofs:10.84.34.23:-1:-1:EXCEPTION:[SVC-GSM-WFALSNRSVC-149706 : oracle.apps.fnd.cp.gsc.SvcComponentContainer.handleComponentEvent(int, String, String)]:Successfully retrieved component details from the database
    [Dec 6, 2011 10:41:57 AM EST]:1323186117578:Thread[BES Dispatch Thread,5,main]:0:-1:sun-ofs:10.84.34.23:-1:-1:EXCEPTION:[SVC-GSM-WFALSNRSVC-149706 : oracle.apps.fnd.cp.gsc.SvcComponentContainer.onBusinessEvent(BusinessEvent)]:Successfully handled component event, oracle.apps.fnd.cp.gsc.SvcComponent.start, for component 10002
    [Dec 6, 2011 10:41:57 AM EST]:1323186117580:Thread[BES Dispatch Thread,5,main]:0:-1:sun-ofs:10.84.34.23:-1:-1:EXCEPTION:[SVC-GSM-WFALSNRSVC-149706 : oracle.apps.fnd.cp.gsc.SvcComponentContainer.onBusinessEvent(BusinessEvent)]:(BusinessEvent{name=oracle.apps.fnd.cp.gsc.SvcComponent.start, key=SVC:06-DEC-2011, priority=50, correlationId=null, sendDate=Tue Dec 06 10:41:56 EST 2011, receiveDate=null, From Agent:  , To Agent:  , Last Subscription=  , Error Message=null, Error Stack=null, [email protected], COMPONENT_ID=10022, CONTAINER_PROCESS_ID=149706, CONTAINER_TYPE=GSM, BES_PAYLOAD_OBJECT=false})
    [Dec 6, 2011 10:41:57 AM EST]:1323186117586:Thread[BES Dispatch Thread,5,main]:0:-1:sun-ofs:10.84.34.23:-1:-1:EXCEPTION:[SVC-GSM-WFALSNRSVC-149706 : oracle.apps.fnd.cp.gsc.SvcComponentContainer.handleComponentEvent(int, String, String)]:Successfully retrieved component details from the database
    [Dec 6, 2011 10:41:58 AM EST]:1323186118078:Thread[BES Dispatch Thread,5,main]:0:-1:sun-ofs:10.84.34.23:-1:-1:EXCEPTION:[SVC-GSM-WFALSNRSVC-149706 : oracle.apps.fnd.cp.gsc.SvcComponentContainer.onBusinessEvent(BusinessEvent)]:Successfully handled component event, oracle.apps.fnd.cp.gsc.SvcComponent.start, for component 10022
    [Dec 6, 2011 10:41:58 AM EST]:1323186118080:Thread[BES Dispatch Thread,5,main]:0:-1:sun-ofs:10.84.34.23:-1:-1:EXCEPTION:[SVC-GSM-WFALSNRSVC-149706 : oracle.apps.fnd.cp.gsc.SvcComponentContainer.onBusinessEvent(BusinessEvent)]:(BusinessEvent{name=oracle.apps.fnd.cp.gsc.SvcComponent.start, key=SVC:06-DEC-2011, priority=50, correlationId=null, sendDate=Tue Dec 06 10:41:56 EST 2011, receiveDate=null, From Agent:  , To Agent:  , Last Subscription=  , Error Message=null, Error Stack=null, [email protected], COMPONENT_ID=10003, CONTAINER_PROCESS_ID=149706, CONTAINER_TYPE=GSM, BES_PAYLOAD_OBJECT=false})
    [Dec 6, 2011 10:41:58 AM EST]:1323186118086:Thread[BES Dispatch Thread,5,main]:0:-1:sun-ofs:10.84.34.23:-1:-1:EXCEPTION:[SVC-GSM-WFALSNRSVC-149706 : oracle.apps.fnd.cp.gsc.SvcComponentContainer.handleComponentEvent(int, String, String)]:Successfully retrieved component details from the database
    [Dec 6, 2011 10:41:58 AM EST]:1323186118258:Thread[BES Dispatch Thread,5,main]:0:-1:sun-ofs:10.84.34.23:-1:-1:EXCEPTION:[SVC-GSM-WFALSNRSVC-149706 : oracle.apps.fnd.cp.gsc.SvcComponentContainer.onBusinessEvent(BusinessEvent)]:Successfully handled component event, oracle.apps.fnd.cp.gsc.SvcComponent.start, for component 10003
    [Dec 6, 2011 10:41:58 AM EST]:1323186118260:Thread[BES Dispatch Thread,5,main]:0:-1:sun-ofs:10.84.34.23:-1:-1:EXCEPTION:[SVC-GSM-WFALSNRSVC-149706 : oracle.apps.fnd.cp.gsc.SvcComponentContainer.onBusinessEvent(BusinessEvent)]:(BusinessEvent{name=oracle.apps.fnd.cp.gsc.SvcComponent.start, key=SVC:06-DEC-2011, priority=50, correlationId=null, sendDate=Tue Dec 06 10:41:56 EST 2011, receiveDate=null, From Agent:  , To Agent:  , Last Subscription=  , Error Message=null, Error Stack=null, [email protected], COMPONENT_ID=10004, CONTAINER_PROCESS_ID=149706, CONTAINER_TYPE=GSM, BES_PAYLOAD_OBJECT=false})
    [Dec 6, 2011 10:41:58 AM EST]:1323186118266:Thread[BES Dispatch Thread,5,main]:0:-1:sun-ofs:10.84.34.23:-1:-1:EXCEPTION:[SVC-GSM-WFALSNRSVC-149706 : oracle.apps.fnd.cp.gsc.SvcComponentContainer.handleComponentEvent(int, String, String)]:Successfully retrieved component details from the database
    [Dec 6, 2011 10:41:58 AM EST]:1323186118418:Thread[inboundThreadGroup1,5,inboundThreadGroup]:0:-1:sun-ofs:10.84.34.23:-1:-1:ERROR:[SVC-GSM-WFALSNRSVC-149706-10002 : oracle.apps.fnd.wf.bes.AgentListenerProcessor.read()]:10consecutive errors occurred
    [Dec 6, 2011 10:41:58 AM EST]:1323186118422:Thread[inboundThreadGroup1,5,inboundThreadGroup]:0:-1:sun-ofs:10.84.34.23:-1:-1:ERROR:[SVC-GSM-WFALSNRSVC-149706-10002 : oracle.apps.fnd.cp.gsc.Processor.performError(ProcessorException)]:Maximum number of errors have occurred for this processing thread.
    [Dec 7, 2011 9:57:06 AM EST]:1323269826687:Thread[inboundThreadGroup1,5,inboundThreadGroup]:0:-1:sun-ofs:10.84.34.23:-1:-1:EXCEPTION:[SVC-GSM-WFALSNRSVC-149706-10000 : oracle.apps.fnd.wf.bes.AgentListenerProcessor.listen()]:WF_EVENT.listen returned processed count: 0, error count: 0
    [Dec 7, 2011 9:57:06 AM EST]:1323269826689:Thread[inboundThreadGroup1,5,inboundThreadGroup]:0:-1:sun-ofs:10.84.34.23:-1:-1:EXCEPTION:[SVC-GSM-WFALSNRSVC-149706-10000 : oracle.apps.fnd.wf.bes.AgentListenerProcessor.read()]:Successfully listened from ECX_INBOUND

  • Reg: real time production issues

    Hi friends
    what type of Production issues we will face in GL, AP, AR, AA, CC, PC, IO, PA, COPA
    pls give me some examples and resolves my mail ID: [email protected]
    thanks in advance

    Hi Madhu,
    What Issues you see in this community are real time issues.
    you can pick any 5 of them which you can understand better with solutions
    All the isssues posted in this community are real time and struggling by someone in the industry
    Pls assign points if this is useful
    Best Regareds
    Ashish Jain

  • HFM 11.1.2.3 Configuration - Issue with Consolidation Administration

    Hi,
    This is regarding a new/fresh installation EPM 11.1.2.3 and have an issue with configuration on HFM; the deployment is distributed as below
    1) Server 1 : Foundation,WebLogic Admin(/OHS) - Workspace/Shared Services/Planning/Calc Manager/EAS/APS
    2) Server 2: Essbase
    3) Server 3 : EPMA/HSF/HFM(FDMee/DRM-Yet, to be installed and configured) - Hadnt used these products and this is totally new to me.
    We have issues with HFM - and while opening the Consolidation Administration.
    We get an error as below, in workspace
    An unexpected error has occured.Check server log or contact your system administrator for more information.
    The web app logs suggested below errors- This is only part of the error log
    E:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\HFMWeb0\logs\oracle-adf.log
    Part of log
    oracle.adf.model.adapter.DataControlFactoryImpl] [SRC_METHOD: createSession] Exception: [[
    oracle.adf.model.adapter.AdapterException: DCA-29000: Unexpected exception caught: oracle.epm.fm.common.exception.HFMException, msg=There is no registered cluster or server
    I hadnt configured 'Configure Cluster' during the HFM configuration; this was a mistake being new to HFM.
    On a further readup online on OTN etc, found that an application cluster is a must have on HFM, even if it is for one server.
    Have one confusion now for fixing this,
    Do a configuration only for 'Configure Cluster', and restart services to fix this issue
    or
    Do a configuration for 'Configure Cluster'and then again re-Configure HFM components
    Configure > Financial Management — Configure Cluster
    Re-Configure > Financial Management — Configure Application Server
    Re-Configure >  Financial Management — Configure Web Server
    Re-Configure >  Financial Management — Configure Web Application
    Re-Configure >  Financial Management — Enable Smart View Provider
    Re-Configure >  Financial Management — Enable Life Cycle Management Provider
    Re-Configure >  Financial Management — Enable Web Services

    Got help from Oracle Support, and this problem is now resolved. The HFM app server was configured fine, earlier.
    Had to follow below steps on the EPM configurator.
    Stop Services
    HFM - Configure Cluster
    HFM - Configure Web Server
    HFM - Deploy to App Server
    Foundation - Configure Web Server.
    Start Services
    Refresh workspace

  • Time Machine issues with OS 10.6.8

    Hi all,
    after updating to 10.6.8 I noticed a Time Machine issue.
    Backup takes very long but only a few MB were backed up.
    And after it was finished, Finder crashed and I had to do a hard reset.
    There´s also a "in progress" file on my USB Backup HDD after finishing.
    Checking my HDD´s and repairing it wasn´t the problem.
    Today I tried a new USB HDD to make a fresh Backup via Time Machine.
    After a few hours it was finished, but only 7,8MB were backed up and still there is an "in progress" file on my new Backup HDD.
    Here´s a troubleshoot:
    Starting standard backup
    Backing up to: /Volumes/My Book/Backups.backupdb
    Ownership is disabled on the backup destination volume.  Enabling.
    Backup content size: 368.5 GB excluded items size: 75.7 GB for volume Macintosh HD
    No pre-backup thinning needed: 351.34 GB requested (including padding), 930.54 GB available
    Waiting for index to be ready (101)
    CarbonCore.framework: coreservicesd process died; attempting to reconnect but future use may result in erroneous behavior.
    Copied 7.2 MB of 292.8 GB, 5 of 1058420 items
    Copied 11 files (27.1 MB) from volume Macintosh HD.
    No pre-backup thinning needed: 100.0 MB requested (including padding), 930.52 GB available
    Copied 165 bytes of 0 bytes, 4 of 0 items
    Error: (-36) SrcErr:YES Copying / to (null)
    Copied 7 files (236 bytes) from volume Macintosh HD.
    Error -50 deleting backup: /Volumes/My Book/Backups.backupdb/Computer/2011-07-19-180247.inProgress
    Starting post-backup thinning
    No post-back up thinning needed: no expired backups exist
    Backup completed successfully.
    Can anyone help me?

    A  whole  lot  about  Time  Machine for help with TM problems.  Also you can select Mac Help from the Finder's Help menu and search for "time machine" to locate articles on how to use TM.  See also Mac 101- Time Machine.
    There are two important errors noted in the backup:
    I-O error -36 « fuzzybrain|daisychain|blogdrain
    The following comes from the LaCie web site but is applicable to any other external drives whether home brew or commercial.
    Getting error -50 when copying data in OS X.
    Some LaCie drives ship out formatted FAT32 so they will be ready to use on either a Mac or a PC. If you are getting error -50 when copying to a LaCie drive, or any drive formatted for PC, it is because of the following:
    Certain characters that can be used in a Mac OS X filename are not allowed in MS-DOS filenames. This can prevent the file from being copied, and can occur when a filename contains non-printing ASCII characters, or any of these characters: ? / \ < > " | > *.
    Either copy the data off of the drive and use Apple's Disk Utility to erase the drive in Mac OS Extended format, or change the filenames of the documents that cannot be copied.

Maybe you are looking for