PXIe-8234 General Purpose?

I have a PXIe-1082 chassis with a spare slot. Can the PXIe-8234 be used in any slot and act as a general purpose Gigabit Ethernet interface for TCP/IP, UDP, multicast, and all that? I don't need it for it's stated use as a GigE Vision interface, I may just need additional network I/O through LabView RT and through Windows 7 (Dual boot or separate hard drives).
Thanks,
Robert
Solved!
Go to Solution.

Hi xl600,
The PXIe-8234 can be used as a normal GigE interface. It comes with the Vision Software which aids in vision-related applications, but this will be a functioning GigE interface for your PXIe system and doesn't have to be used for vision.
Julian R.
Applications Engineer
National Instruments

Similar Messages

How to create general purpose database using dbca

Hi,
I have installed oracle 10g on AIX .
and now i have to create a database/instance for the firsttime whch must to be general using dbca.
I want to create database silently. could any one please tell me the command to create a database silently

Hello,
So as to do a completely silent installation you may use a responsefile as follow:
$ORACLE_HOME/bin/dbca -silent -cloneTemplate *<General Purpose option>* -datafileDestination */datafilepath* -responseFile */local_dir/dbca.rsp*Where dbca.rsp is a response file template that you may edit so as to supply administrative password,...
Else, about the reason why your command got stuck. You may check the exact options with the statement below:
dbca -hIt may change from one release to another.
Hope this help.
Best regards,
Jean-Valentin

A general purpose TV tuner driver or software for SL?

I have a tv tuner card which is windows compatible and I would like to use it with my mac. this... http://entermultimedia.com/tvtuner_external_usb210U.html is the one. Is there like a general purpose tv tuner driver for mac?

Elgato's EyeTV software
<http://www.elgato.com/elgato/na/mainmenu/products/software/EyeTV3/product3.en.h tml>
supports many TV tuners, but does not list yours. Maybe yours is actually a rebranded model that is supported. You could try contacting Elgato.

"North America General Purpose 2"-color setting back on every start : PS CS5, Win 8.1 HELP

Hi,
have a problem with my Photoshop CS5 Color Settings on Windows 8.1. Maybe there's already a thread but haven't found.
If I close and reopen PS my color settings are gone and back on "North America General Purpose 2" with sRGB. Have to change every time I open PS doesn't matter if I'm admin or user. Why doesn't PS leave my settings as the default the next time it opens?
Any ideas? Cause this is very annoying ...

Could be a problem with the Color Settings. Open it up and press the Alt key. The Cancel button will change to Reset. Click on that and it should place it to default. The Custom settings should hold.
If not, you can use the Save button, give your Custom setting a name, add some notes and Save it.
Gene

How can we distinguish b/c general purpose and top level containers?

how can we distinguish b/c general purpose and top level containers?plzzz help me out

May be this will help u out
http://www.ictp.trieste.it/~manuals/programming/Java/tutorial/uiswing/components/components_pics.html

Ymenu - Interfaces - Post Document (General Purpose) -- FBB1

Hi,
I tried to perform as per below:
I went to ymenu - -> Interfaces --> Post Document (General Purpose) -- FBB1
After that in the Source file, i selected the file that i would like to upload.
Follow by click on the execute button.
Can i know after i have uploaded to the SAP system then how am i going to display or review back the uploaded data in the SAP System. (The data is in Excel)
Which transaction code should i use?
Thanks.
Best Regards,
Joo

Hi Gimmo,
Thanks for the links.
I went to "Reports for evaluating transferred data - RFBELS00 "
Then i enter RFBELS00 into the SAP system but this Transaction code does not exist?
i went to SE16, i think RFBELS00 is not a table rite?
Can i know how am i going to display it?
Thanks.
Best Regards,
Joo

I am having trouble with custom color settings. It randomly reverts back to North American General Purpose without warning. This is a big problem for me. My customers (professional photographers) expect consist colors in my printing. Help!

I am having trouble with custom color settings. It randomly reverts back to North American General Purpose without warning. This is a big problem for me. My customers (professional photographers) expect consist colors in my printing. Help!

Do you even know how to nuke and re-set Photoshop's preferences, colorplak? Your last post seems to reveal that you don't understand what I'm talking about. Here's a link you can click on:
Preference file functions, names, locations | Photoshop CC
To re-create the preferences files for Photoshop, start the application while holding down Ctrl+Alt+Shift (Windows) or Command+Option+Shift (Mac OS). Then, click Yes to the message, "Delete the Adobe Photoshop Settings file?"
Note: If this process doesn't work for you while you're using a wireless (bluetooth) keyboard, attach a wired keyboard and retry.
Important: If you re-create the preferences by deleting the Adobe Photoshop CC Settings file, make sure that you only delete that file. If you delete the entire settings folder, you also delete any unsaved actions or presets.
Reinstalling Photoshop does not remove the preferences file. Before reinstalling Photoshop, re-create your preferences.
Note for Photoshop 14.1 and later: If you use Generator and reset your Preferences, Generator is disabled. Choose Preferences > Plug-ins to turn it back on.
Video: Julieanne Kost created a video that takes you through two ways of resetting your Photoshop preferences. The manual preference file removal method is between 0:00 - 5:05. The keyboard shortcut method is between 5:05 - 8:18. The video is located here.
Mac OS
Important: Apple made the user library folder hidden by default with the release of Mac OS X 10.7. If you require access to files in the hidden library folder to perform Adobe-related troubleshooting, see How to access hidden user library files.

Having trouble figuring out how to use trigger inputs as a general purpose input.

I'm trying to use "Trigger 1" as a general purpose input to indicate the status of external circuitry. I can't seem to get the "Read High-Speed Capture Status" to indicate anything. I'm using the "Configure High-Speed Capture" VI with the capture mode set to Inverting Digital Input, and that VI feeds into a Do-While loop which contains the "Read High-Speed Capture Status" VI, which has the Ret Vect set to 0. I see from the online help that the High-Speed Capture function is available on Servo and Closed-Loop stepper systems, which I suppose is to enable the ability to read the position of the encoders. I'm using an open loop stepper system, so are these High-Speed Capture fun
ctions unavailable even though I'm looking only for status (Trigger 1), and not concerned with reading position? Thanks in advance, Rob.

Thanks for the answer Ken. I'm going to try a different workaround. The global was too slow, and I think I'll break my subVI into two parts. I'll create a sub that has all the setup stuff in it, then embed the actual "check trigger status" loop in the main VI. The loop contains only 2 or 3 nodes. Too bad LabView works this way. I can see one reason it should, but another larger reason it shouldn't. Wishlist.... Oh, speaking of wishlist, I like the improvements that 6.0 has brought, but one thing still bugs me. There's no way to have LabView remember the place to look for files when it's first started. It defaults to "My Documents", which should be, as all LabView programers know "LabVIEW6\user.lib" (or whatever). Of course, once th
ere, LabView remembers for that session. Next time it's started, back to "My Documents" again. How 'bout fixing the "Options", "Path" settings so that it will actually remember the path set? Am I missing something here, or does it have anything to do with the fact that we're using Windows 98? My buddy's using NT, and his works the same. Is there a way around this? TIA, Rob.

OS X Server as a general-purpose LDAP server?

Greetings!
Wha's the conventional wisdom on the suitability of OS X server as a general-purpose LDAP server?
It would seem to me that the OD schema extensions and ties to OS X logins might make it hard - is that accurate?
Is it possible to add custom schemas to OD? Is it easy? (By easy, I mean as easy as, say, OpenLDAP under Linux?)
Thanks!!!

Hi,
Wht is it you are trying to do?
You can modify the schema as you do under Linux. However, the default configuration does conatin extra data that apple uses for various reasons such as networked home directories. You can completely change the schema if you wish, but its not really a recommendation I would make. You would be best just adding to the existing structure to try an meet your requirements.
Thanks
Gary

Will zeroizing and regenerating the Default-RSA-Key affect any other general purpose keys on my ASA 5545x?

I have an ASA 5545x that is a production device for receiving all AnyConnect VPN traffic for our organization. We purchased and installed a Comodo certificate to create the trust level necessary for our employees to connect. I'm attempting to enable SSH on the device for management purposes, but the current <Default-RSA-Key> does not allow me to initiate a valid SSH session. I have encountered this issue on other ASAs within our organization, and it hasn't been an issue to simply zeroize the current key and regenerate it to restore the ability to SSH to the devices. Where the snag comes in is that this 5545x is the only ASA that has a key installed that wasn't self signed. With that in mind, I have a few questions about whether 3rd-party signed keys are dependent on the self-signed keys on the device. I intend to zeroize both the <Default-RSA-Key> and the <Default-RSA-Key>.server certificates if they will not affect my VPN-associated Comodo key.
Does the Comodo key depend on other keys existing on the ASA?
Am I free to zeroize only the <Default-RSA-Key> without affecting the VPN associated Comodo key?
Here is the result of the command "show crypto key mypubkey rsa" :
Key pair was generated at: 12:02:29 CDT Aug 19 2014
Key name: <Default-RSA-Key>
Usage: General Purpose Key
Modulus Size (bits): 1024
Key Data:
<Redacted>
Key pair was generated at: 10:16:52 CDT Sep 20 2012
Key name: my.comodo.key
Usage: General Purpose Key
Modulus Size (bits): 2048
Key Data:
<Redacted>
Key pair was generated at: 01:35:42 CDT Jul 30 2014
Key name: <Default-RSA-Key>.server
Usage: Encryption Key
Modulus Size (bits): 768
Key Data:
<Redacted>
Thank you to any and all that assist me in understanding how the ASA handles certificate keys.

As long as the Comodo-signed certificate is bound to the my.comodo.key private key (i.e. you used that key when generating the certificate signing request), you should be fine to zeroize the Default-RSA-Key. The latter should ideally only be used for ssh access.

Using cRIO chassis slots for general-purpose

hi,
i have cRIO 9004 and cRIO 9103 chassis, labview 2011...
as i know, cRIO chassis controls its slots if there present any module or not.. if detect anyone, read EEPROM and so on..
but how can i control cRIO chassis slots for my own general-purpose without any module...
when i create projects, it just shows me as chassis I/O
* chassis Temperature
* FPGA LED
* Scan Clock
* Sleep
* system reset
i couldn't write anything from chassis slots and see on oscilloscope screen, (for example: using as analog or digital output) ...
Davut..
Solved!
Go to Solution.

thanks for your reply
in fact i have...
-module development kit 2.0
-compactRIO module support 4.0.1
-NIRIO 4.0
i know which pins i can use for DIO or etc..
the point is, i haven't thought that it is not possible without hardware.. i read the manuals but couldn't create all structure in my mind..
So, as i understand from your message, i have some programs but it s not possible to controlling chassis slots without hardware.. am i right?

MicroBlaze MCS General Purpose Input (GPI1_Interrupt)

So I have generated a MicroBlaze MCS v1.2 Core and I enabled General Purpose Interrupt 1 (32-bits) and I checked the box for "GPI Interrupt".
Now the "GPI Interrupt" is set as an output node, while the GPI1 is set up as an interrupt.
I have searched all over the Xilinx documentation and this forum, and I cannot determine the answer to the following:
What and when does GPI1_Interrupt trigger? And why is it an output signal and not an input signal?
Here is a copy of the entity of my core:
entity microblaze_mcs_core is
port (
Clk : in STD_LOGIC := 'X';
Reset : in STD_LOGIC := 'X';
INTC_IRQ : out STD_LOGIC;
GPI1_Interrupt : out STD_LOGIC;
GPI2_Interrupt : out STD_LOGIC;
GPO1 : out STD_LOGIC_VECTOR ( 31 downto 0 );
GPO2 : out STD_LOGIC_VECTOR ( 31 downto 0 );
GPI1 : in STD_LOGIC_VECTOR ( 31 downto 0 );
GPI2 : in STD_LOGIC_VECTOR ( 31 downto 0 )
end microblaze_mcs_core;
I am basically trying to figure out what is the best way to transfer data to and from my MicroBlaze core. Please note that I am using this core from LabVIEW FPGA, so any logic I use will have to be implemented by me!

Duplicate post. Look here.
Regards,
Chris Delvizis
National Instruments

General purpose class (Need some Help)

I have a situation where Id like to have getText() and setText() methods in various components, some of which dont define the method, ie JComboBox, JRadioButton ect.....
Now I know I could subclass the components Id like to add this functionality to but Im trying to make my code as easy to use as possible an really would hat to do this in this case...
Id much rather have a single class which could handle each component through constructors; This too though has some issues which Im not sure I want to deal with. (if youd like more info on my issues with this technique just request) ..
The problem stems from the various ways with wich text would be extracted from the component, JComboBox, getSelected()
JRadioButton

You could define an interface that has these methods. Then you create subclasses that implement this interface for the components JLabel, JRadioButton etc. This way you can refer to every component in the same way; eg. you can have an array of them and call getText() on each of them independent of what components they realy are. Instantiating can be made easier with reflection: you canhave a new class that has a static method that takes the class name and the constructor's parameter list as parametetrs and returns a new obect. A bit like JComponent comp = (JComponent) Class.forName("javax.swing.JLabel").newInstance();
Another possibility is writing a new class that extends JComponent and has a JComponent as a member. In the constructor you define the underlaying component's actual class and then act accordingly in the get/set methods. Like having a general wrapper for any JComponent.

General-purpose Bluetooth Headsets for both mobile...

Hi,
I don´t know if this really belongs here, it´s more a general question: Is it possible to use a Bluetooth-Headset - like the ones you commonly have for mobile phones - for both the mobile phone and Skype (installed on a computer, not on the phone)?
I have tried once to install the "Mobiola Headset for Skype" on my phone to be able to walk around and still talk over VoIP, but that failed because Mobiola couldn´t tell me exactly which COM port the software was trying to use, but apparently that one was blocked by Idontknowwhat.
Thanks a lot!
Regards,
Hendikoischnur
IT will paint our future - either green or black
* ecosia, the eco-friendly search engine (powered by Yahoo/Bing/WWF);
* Searching for pics online? Try ecocho.eu or treehoo.com
* For those who don´t want to miss Google: Try znout.de - it´s Google running on green energy
* CO2-free chatting: Try Jabber-server.de (running on 100% waterpower)
Solved!
Go to Solution.

Hi sapporobaby,
cite:
By the way, you do realize that you are going over the Internet with Fring/Skype so there is not guarantee of the sound quality. It is a packet routed connection rather than a switched connection so for what it does it is not bad.
cite end
>>Yes, I do realize that Fring is a VoIP application. You´re absolutely right, it is not bad - which isn´t good enough. It may be good enough if you´re going to call a place half the world away which would otherwise cost you a fortune - but then you´re dependent on that place half the world away having the right infrastructure in place for the connection from internet to landline. In my case, that wasn´t the case, so it´s no good - for me. If you want to know, I would use it to call Georgia, but even if you call from a normal landline to Georgia, it is normal to hear another connection as well as the person you´re speaking to and the connection going on and off... much worse if you call via VoIP (to landline).
Anyway, I have already found and purchased what I was looking for.
Regards,
Hendikoischnur
Message Edited by hendikoischnur on 26-Mar-2009 09:26 AM
IT will paint our future - either green or black
* ecosia, the eco-friendly search engine (powered by Yahoo/Bing/WWF);
* Searching for pics online? Try ecocho.eu or treehoo.com
* For those who don´t want to miss Google: Try znout.de - it´s Google running on green energy
* CO2-free chatting: Try Jabber-server.de (running on 100% waterpower)

Pulse train generation without general purpose counters

Hello,
I am attempting to generate a continuous square wave using Labview, but I do not want to use the hardware counters because I am using them to measure pulse widths on two other signals. I have tried using analog pulse generation VIs, but they slow down my program way too much. The signal I need to produce will be used to control a motion sensor, and has to be less than 100Hz, with a 90%+ duty cycle. Is there another way to produce a pulse train, or is it possible to use one counter to do two things at once?
Thanks in advance,
Nick
Attachments:
july23.vi ‏277 KB

Nick,
Have you tried using the Benchtop Function Generator that comes with newer versions of LabVIEW? This program demonstrates a better method of analog output than the AO Wavform Generation vi because it only calls the Config and Start vi's once, while repeating the Write until the user changes the front panel. This also allows you to set the duty cycle and frequency from the front panel, similar to a regular function generator.
It can be found in the LabVIEW 6.1 shipping examples under Hardware I/O >> DAQ >> Solutions >> Software Created Instruments. Hope this helps!
Luke Schreier
National Instruments

PXIe-8234 General Purpose?

Similar Messages

Maybe you are looking for