PYXX_READ_PAYROLL_RESULT problem

Hi People,
what is the Cluster ID for FM
PYXX_READ_PAYROLL_RESULT for US ?
I used RU but it is giving error
What happened?                                                                               
The current ABAP/4 program "%_T005K0 " had to be terminated because       
one of the statements could not be executed.                                                                               
This is probably due to an error in the ABAP/4 program.                                                                               
What can you do?                                                                               
Note the actions and input that caused the error.                                                                               
Inform your SAP system administrator.                                                                               
You can print out this message by choosing "Print". Transaction ST22      
allows you to display and manage termination messages, including keeping  
them beyond their normal deletion date.                                                                               
Error analysis                                                                               
Call to FORM "IMPORT_INTERNATIONAL" is incorrect:                         
The actual parameter no. 2 has a different data type in the               
PERFORM than requested by the FORM "IMPORT_INTERNATIONAL".        
Please help.

Hi Raj,
          You can use the FM like below, as cluster ID is not mandatory.
      call function 'PYXX_READ_PAYROLL_RESULT'
        exporting
          employeenumber               = xsrtfdlow-pernr
          sequencenumber               = lv_seqno
          read_only_international      = 'X'
        changing
          payroll_result               = lt_payresult
        exceptions
          illegal_isocode_or_clusterid = 1
          error_generating_import      = 2
          import_mismatch_error        = 3
          subpool_dir_full             = 4
          no_read_authority            = 5
          no_record_found              = 6
          versions_do_not_match        = 7
          error_reading_archive        = 8
          error_reading_relid          = 9
          others                       = 10.
else, below is the list of standard cluster ID's for each country, you can pass the ID for which you would like to read payroll results.
I hope this solve your issue.  still if you have any issue , please reply back!!!
Regards
Sunil Kondoju
A2     Payroll results Argentina: Annual consolidation
AA     Payroll Result (Saudi Arabia)
AB     Payroll Result (Albania)
AD     Payroll Result (Andorra)
AE     Payroll results (garnishment)
AF     Garnishment directory
AG     Payroll Result (Antigua)
AH     Payroll Result (Afghanistan)
AM     Payroll Result (Armenia)
AN     Payroll Result (Netherlands Antilles)
AO     Payroll Result (Angola)
AR     Payroll results (Argentina)
AW     Payroll Result (Aruba)
AZ     Payroll Result (Azerbaijan)
B2     PDC data (month)
BA     Payroll Result (Bosnia and Herzegovina)
BB     Payroll Result (Barbados)
BD     Payroll Result (Bangladesh)
BF     Payroll Result (Burkina Faso)
BG     Payroll Result (Bulgaria)
BH     Payroll Result (Bahrain)
BI     Payroll Result (Burundi)
BJ     Payroll Result (Benin)
BM     Payroll Result (Bermuda)
BN     Payroll Result (Brunei Darussalem)
BO     Payroll Result (Bolivia)
BR     Payroll results (Brazil)
BS     Payroll Result (Bahamas)
BT     Payroll Result (Bhutan)
BV     Pension fund (Switzerland)
BW     Payroll Result (Botswana)
BY     Payroll Result (Belarus)
BZ     Payroll Result (Belize)
CA     Cluster directory (CU enhancement for archiving)
CD     Cluster Directory (to 3.1I)
CF     Payroll Result (Central African Republic)
CG     Payroll Result (Congo)
CI     Payroll Result (Ivory Coast)
CK     Payroll Result (Cook Islands)
CL     Payroll Result (Chile)
CM     Payroll Result (Cameroon)
CN     Payroll results (China)
CO     Payroll Result (Colombia)
CR     Payroll Result (Costa Rica)
CU     Cluster directory
CV     Payroll Result (Cape Verde)
CW     Cluster directory for SI quarterly totals (Belgium)
CX     Cluster directory for SI declaration (Belgium)
CY     Cluster directory - BELCOTAX results (Belgium)
DB     BAV-/Pension certificate (DE)
DG     DUEVO messages - part-time employees (DE)
DJ     Payroll Result (Djibouti)
DK     DUEVO messages (DE)
DM     Payroll Result (Dominica)
DO     Payroll Result (Dominican Republic)
DP     Garnishments (DE)
DQ     Garnishment directory
DU     DUEVO notifications, O record
DY     Payroll Result (Algeria)
DZ     DUEVO file number (Germany)
EC     Payroll Result (Ecuador)
EE     Payroll Result (Estonia)
EF     Requests for refund (Austria)
EG     Payroll Result (Egypt)
EI     Payroll Result (Ethiopia)
EM     Payroll Result (United Arab Emirates)
ER     Payroll Result (Eritrea)
ES     Payroll results (totals)
ET     Payroll results (totals)
FI     Payroll results (Finland)
FJ     Payroll Result (Fiji)
FM     Payroll Result (Micronesia)
FO     Payroll Result (Faroe Islands)
GA     Payroll Result (Gabon)
GD     Payroll Result (Grenada)
GE     Payroll Result (Georgia)
GF     Payroll Result (French Guyana)
GH     Payroll Result (Ghana)
GJ     Cluster GJ (Santei/Geppen evaluation results)
GL     Payroll Result (Greenland)
GM     Payroll Result (Gambia)
GN     Payroll Result (Guinea)
GP     Payroll reconciliations (GB)
GQ     Payroll Result (Equatorial Guinea)
GR     Payroll Result (Greece)
GT     Payroll Result (Guatemala)
GU     Payroll Result (Guam)
GW     Payroll Result (Guinea Bissau)
GY     Payroll Result (Guyana)
HK     Payroll results (HongKong)
HN     Payroll Result (Honduras)
HR     Payroll Result (Croatia)
HT     Payroll Result (Haiti)
HZ     Additional cluster for Hong Kong
IC     Payroll Result (Iceland)
ID     Interface toolbox - Directory for interface results
IE     Payroll results (Ireland)
IF     Payroll interface
IK     KIDICAP interface
IL     Payroll Result (Israel)
IN     Payroll Results India
IQ     Payroll Result (Iraq)
IR     Payroll Result (Iran)
IS     Payroll results (Indonesia)
JA     Annual tax declaration (Austria)
JM     Payroll Result (Jamaica)
JO     Payroll Result (Jordan)
KE     Payroll Result (Kenya)
KG     Payroll Result (Kyrgyzstan)
KH     Payroll Result (Cambodia)
KI     Payroll Result (Kiribati)
KM     Payroll Result (Comoros)
KO     Payroll Result (Republic of the Congo)
KP     Payroll Result (North Korea)
KR     Payroll Result: Korea
KT     Payroll Result (Saint Kitts and Nevis)
KU     Payroll Result (Cuba)
KW     Payroll Result (Kuwait)
KZ     Payroll Result (Kazakhstan)
LC     Payroll Result (Saint Lucia)
LE     Payroll Result (Lebanon)
LI     Payroll Result (Liechtenstein)
LK     Payroll Result (Sri Lanka)
LO     Payroll Result (Laos)
LR     Payroll Result (Liberia)
LS     Payroll Result (Lesotho)
LT     Payroll Result (Lithuania)
LU     Payroll Result (Luxembourg)
LV     Payroll Result (Latvia)
LY     Payroll Result (Libya)
LZ     Payslip (Austria)
MA     Payroll Result (Morocco)
MC     Payroll Result (Monaco)
MD     Payroll Result (Moldavia)
MG     Payroll Result (Madagascar)
MH     Payroll Result (Marshall Islands)
MK     Payroll Result (Macedonia)
ML     Payroll Result (Mali)
MM     Payroll Result (Myanmar)
MN     Payroll Result (Mongolia)
MP     Payroll Result (Northern Mariana Islands)
MR     Payroll Result (Mauritania)
MT     Payroll Result (Malta)
MU     Payroll Result (Mauritius)
MV     Payroll Result (Maldives)
MW     Payroll Result (Malawi)
MX     Payroll results (Mexico)
MZ     Payroll Result (Mozambique)
N1     Advance payments (New Zealand)
NA     Payroll Result (Namibia)
NC     Payroll Result (New Caledonia)
NE     Payroll Result (Niger)
NG     Payroll Result (Nigeria)
NP     Payroll Result (Nepal)
NR     Payroll Result (Nauru)
NZ     Payroll results (New Zealand)
OD     Civil service - staggered payment (directory)
OM     Payroll Result (Oman)
PA     Payroll Result (Panama)
PE     Payroll Result (Peru)
PF     Payroll Result (French Polynesia)
PG     Payroll Result (Papua New Guinea)
PH     Payroll Results Philippines
PK     Payroll Result (Pakistan)
PL     Payroll Result (Poland)
PO     Payroll Result (Puerto Rico)
PS     Schema
PT     Schema
PU     Payroll Result (Paraguay)
PW     Payroll Result (Palau)
Q0     Statements (international)
Q1     Statements (batch comments - international)
Q3     Advance payments (Australia)
QA     Payroll Result (Qatar)
RA     Payroll results (Austria)
RB     Payroll results (Belgium)
RC     Payroll results (Switzerland), all data
RD     Payroll results (Germany), all data
RE     Payroll results (Spain)
RF     Payroll results (France), all data
RG     Payroll results (Britain)
RH     Payroll Result (Hungary)
RI     Payroll results (Italy)
RJ     Payroll results (Japan)
RK     Payroll results (Canada)
RL     Payroll results (Malaysia)
RM     Payroll results (Denmark)
RN     Payroll results (Netherlands)
RO     Payroll Result (Romania)
RP     Payroll results (Portugal)
RQ     Payroll results (Australia)
RR     Payroll results (Singapore)
RS     Payroll results (Sweden)
RT     Payroll Result (Czech Republic)
RU     Payroll results (USA)
RV     Payroll results (Norway)
RW     Payroll results (South Africa)
RX     Payroll results (international), all data
SC     Payroll Result (Seychelles)
SD     Payroll Result (Sudan)
SI     Payroll results Slovenia
SJ     Social insurance - evaluation results (Japan)
SK     Payroll Result (Slovak Republic)
SL     Payroll Result (Sierra Leone)
SM     Payroll Result (San Marino)
SN     Payroll Result (Senegal)
SO     Payroll Result (Somalia)
SP     Statutory sickpay (Great Britain)
SR     Payroll Result (Suriname)
SV     Payroll Result (El Salvador)
SY     Payroll Result (Syria)
SZ     Payroll Result (Swaziland)
TD     Payroll Result (Chad)
TG     Payroll Result (Togo)
TH     Payroll results (Thailand)
TJ     Payroll Result (Tadjikistan)
TM     Payroll Result (Tunisia)
TN     Payroll results (Taiwan)
TO     Payroll Result (Tonga)
TP     Payroll Result (East Timor)
TR     Payroll Result (Turkey)
TT     Payroll Result (Trinidad and Tobago)
TU     Payroll Result (Turkmenistan)
TV     Payroll Result (Tuvalu)
TW     Tax data South Africa
TZ     Payroll Result (Tanzania)
UA     Payroll Result (Ukraine)
UG     Payroll Result (Uganda)
UN     Payroll Result (United Nations)
UR     Payroll Result (Russian Federation)
UY     Payroll Result (Uruguay)
UZ     Payroll Result (Uzbekistan)
VA     Payroll Result (State of the Vatican City)
VC     Payroll Result (Saint Vincent and the Grenadines)
VE     Payroll results (Venezuela)
VN     Payroll Result (Vietnam)
VU     Payroll Result (Vanuatu)
WA     Payroll Result (Rwanda)
WS     Payroll Result (Samoa)
WW     SI quarterly totals cluster - Belgian net pay
WX     SI declaration cluster - Belgian net pay
WY     BELCOTAX cluster results - Belgian net pay
XA     Special run (Austria)
XD     Payroll results (Germany), all data
XE     Payroll results (Spain)
XM     Payroll results (Denmark)
XY     Special payments (Ireland)
YE     Payroll Result (Yemen)
YJ     Cluster YJ (year-end adjustment) (Japan)
YS     Payroll Result (Solomon Islands)
YT     Payroll Result (Sao Tome and Principe)
YU     Payroll Result (Serbia and Montenegro)
ZA     VBL/SPF average
ZD     VBL/SPF tax/average
ZL     Time wage types/work schedule
ZM     Payroll Result (Zambia)
ZS     VBL/SPF onetime payment
ZV     SPF data
ZW     Payroll Result (Zimbabwe)
ZY     Payroll Result (Cyprus)

Similar Messages

  • Problem when using function module PYXX_READ_PAYROLL_RESULT giving dump.

    When i am using PYXX_READ_PAYROLL_RESULT function module to get HR cluster data. I am getting following dump.
    So,can any one help me to solve this issue.I want this function data.
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_TYPE', was
      not caught in
    procedure "PYXX_READ_PAYROLL_RESULT" "(FUNCTION)", nor was it propagated by a
      RAISING clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    Call to FORM "IMPORT_RESULT" is incorrect:
    The actual parameter no. 2 has a different data type in the
    PERFORM than requested for the FORM "IMPORT_RESULT" in program "%_T0LJ20".
    Program                                 SAPLHRPAY99_IMPEXP
    Include                                 LHRPAY99_IMPEXPU02
    Row                                     1
    Module type                             (FUNCTION)
    Module Name                             PYXX_READ_PAYROLL_RESULT
    Program                                 SAPLHRPAY99_IMPEXP
    Include                                 LHRPAY99_IMPEXPU02
    Row                                     137
    Module type                             (FUNCTION)
    Module Name                             PYXX_READ_PAYROLL_RESULT

    Find below is my code can u tell me wch type is not true .i tried but not able to find prob solution.
    Plz help me waiting for reply.
    TYPE-POOLS: SLIS.
    DATA : FIELDCATALOG TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE,
          it_sort TYPE slis_t_sortinfo_alv WITH HEADER LINE,
          gd_tab_group TYPE slis_t_sp_group_alv,
          gd_layout TYPE slis_layout_alv,
          gd_repid LIKE sy-repid,
          gt_events TYPE slis_t_event,
          gd_prntparams TYPE slis_print_alv,
          it_eve TYPE slis_t_event,
           V_LAYOUT  TYPE SLIS_LAYOUT_ALV.
          wa_eve TYPE slis_alv_event.
    *DATA header TYPE slis_t_listheader WITH HEADER LINE.
    *DATA: ls_fcat   TYPE slis_t_fieldcat_alv,
         l_lin     TYPE i.
    *DATA: ls_event TYPE slis_alv_event.
    DATA : WA_COLNO(2) TYPE N VALUE '1'.
    DATA : REPID LIKE SY-REPID.
    TABLES: PA0001,PA0002,T001P,T528T,T527X,T503T.
    DATA:BEGIN OF IT_PA0002 OCCURS 0,
          PERNR LIKE PA0002-PERNR,
         END OF IT_PA0002.
    DATA:BEGIN OF IT_PA0001 OCCURS 0,
          PERNR LIKE PA0001-PERNR,
          ENAME LIKE PA0001-ENAME,
          PLANS LIKE PA0001-PLANS,
          WERKS LIKE PA0001-WERKS,
          BTRTL LIKE PA0001-BTRTL,
          ORGEH LIKE PA0001-ORGEH,
          PERSK LIKE PA0001-PERSK,
         END OF IT_PA0001.
    DATA: BEGIN OF IT_T528T OCCURS 0,
            PLANS LIKE T528T-PLANS,
            PLSTX LIKE T528T-PLSTX,
          END OF IT_T528T.
    DATA: BEGIN OF IT_T001P OCCURS 0,
            WERKS LIKE T001P-WERKS,
            BTRTL LIKE T001P-BTRTL,
            BTEXT LIKE T001P-BTEXT,
          END OF IT_T001P.
    DATA: BEGIN OF IT_T527X OCCURS 0,
            ORGEH LIKE T527X-ORGEH,
            ORGTX LIKE T527X-ORGTX,
          END OF IT_T527X.
    DATA: BEGIN OF IT_T503T OCCURS 0,
            PERSK LIKE T503T-PERSK,
            PTEXT LIKE T503T-PTEXT,
          END OF IT_T503T.
    DATA:BEGIN OF IT_FINAL OCCURS 0,
          PERNR LIKE PA0001-PERNR,
          ENAME LIKE PA0001-ENAME,
          PLSTX LIKE T528T-PLSTX,
          BTEXT LIKE T001P-BTEXT,
          ORGTX LIKE T527X-ORGTX,
          PTEXT LIKE T503T-PTEXT,
         END OF IT_FINAL.
    *DATA: WI_RT LIKE LINE OF PAYROLL-INTER-RT,
    *DATA: WI_RGDIR LIKE STANDARD TABLE OF PC261 WITH HEADER LINE,
    DATA: IT_EVP TYPE HRPY_TT_RGDIR,
          ls_evp LIKE LINE OF IT_EVP,
          WI_RGDIR LIKE STANDARD TABLE OF PC261 WITH HEADER LINE,
          WI_PAYRESULT TYPE PAY99_RESULT.
         WI_PAYRESULT TYPE STANDARD TABLE OF PAYUS_RESULT WITH HEADER LINE.
    DATA  WG_MOLGA LIKE T500L-MOLGA.
    SELECTION-SCREEN BEGIN OF BLOCK B1.
    SELECT-OPTIONS: S_PERNR FOR PA0001-PERNR,
                    S_BTRTL FOR PA0001-BTRTL,
                    S_ORGEH FOR PA0001-ORGEH.
    SELECTION-SCREEN END OF BLOCK B1.
    START-OF-SELECTION.
      PERFORM GET_DATA.
      PERFORM BUILD_FIELD_CATLOG.
      PERFORM DISPLAY_DATA.
    *&      Form  GET_DATA
          text
    -->  p1        text
    <--  p2        text
    FORM GET_DATA .
      SELECT PERNR
        INTO CORRESPONDING FIELDS OF TABLE IT_PA0002
        FROM PA0002
        WHERE PERNR IN S_PERNR.
      IF IT_PA0002[] IS NOT INITIAL.
        SELECT PERNR ENAME PLANS WERKS BTRTL ORGEH PERSK
           INTO CORRESPONDING FIELDS OF TABLE IT_PA0001
           FROM PA0001
           FOR ALL ENTRIES IN IT_PA0002
           WHERE PERNR  = IT_PA0002-PERNR
           AND   BTRTL IN S_BTRTL
           AND   ORGEH IN S_ORGEH.
      ENDIF.
      IF IT_PA0001[] IS NOT INITIAL.
        SELECT PLANS PLSTX
          INTO CORRESPONDING FIELDS OF TABLE IT_T528T
          FROM T528T
          FOR ALL ENTRIES IN IT_PA0001
          WHERE PLANS = IT_PA0001-PLANS
          AND   SPRSL = 'EN'.
        SELECT WERKS BTRTL BTEXT
          INTO CORRESPONDING FIELDS OF TABLE IT_T001P
          FROM T001P
          FOR ALL ENTRIES IN IT_PA0001
          WHERE WERKS = IT_PA0001-WERKS
          AND   BTRTL = IT_PA0001-BTRTL.
        SELECT ORGEH ORGTX
          INTO CORRESPONDING FIELDS OF TABLE IT_T527X
          FROM T527X
          FOR ALL ENTRIES IN IT_PA0001
          WHERE ORGEH = IT_PA0001-ORGEH
          AND   SPRSL = 'EN'.
        SELECT PERSK PTEXT
          INTO CORRESPONDING FIELDS OF TABLE IT_T503T
          FROM T503T
          FOR ALL ENTRIES IN IT_PA0001
          WHERE PERSK = IT_PA0001-PERSK
          AND   SPRSL = 'EN'.
      ENDIF.
    *DELETE ADJACENT DUPLICATES FROM IT_PA0001 COMPARING PERNR.
      LOOP AT IT_PA0001.
        MOVE IT_PA0001-ENAME TO IT_FINAL-ENAME.
        READ TABLE IT_PA0002 WITH KEY PERNR = IT_PA0001-PERNR.
        IF SY-SUBRC = 0.
          MOVE IT_PA0002-PERNR TO IT_FINAL-PERNR.
        ENDIF.
        READ TABLE IT_T528T WITH KEY PLANS = IT_PA0001-PLANS.
        IF SY-SUBRC = 0.
          MOVE IT_T528T-PLSTX TO IT_FINAL-PLSTX.
        ENDIF.
        LOOP AT IT_T001P WHERE WERKS = IT_PA0001-WERKS AND BTRTL = IT_PA0001-BTRTL.
          MOVE IT_T001P-BTEXT TO IT_FINAL-BTEXT.
        ENDLOOP.
        READ TABLE IT_T527X WITH KEY ORGEH = IT_PA0001-ORGEH.
        IF SY-SUBRC = '0'.
          MOVE IT_T527X-ORGTX TO IT_FINAL-ORGTX.
        ENDIF.
        READ TABLE IT_T503T WITH KEY PERSK = IT_PA0001-PERSK.
        IF SY-SUBRC = '0'.
          MOVE IT_T503T-PTEXT TO IT_FINAL-PTEXT.
        ENDIF.
        CALL FUNCTION 'CU_READ_RGDIR'
          EXPORTING
            PERSNR          = IT_FINAL-PERNR
          BUFFER
          NO_AUTHORITY_CHECK = ' '
          IMPORTING
            MOLGA           = WG_MOLGA
          TABLES
            IN_RGDIR        = WI_RGDIR
          EXCEPTIONS
            NO_RECORD_FOUND = 1
            OTHERS = 2 .
         CLEAR WG_SUM.
        LOOP AT WI_RGDIR INTO ls_evp.
           IF ( WI_RGDIR-FPEND BETWEEN P_STDATE AND P_ENDATE AND
           WI_RGDIR-SRTZA = 'A' ) .
             IF Wg_MOLGA = '10'.
          CALL FUNCTION 'PYXX_READ_PAYROLL_RESULT'
            EXPORTING
              CLUSTERID                    = 'IN'
              EMPLOYEENUMBER               = IT_FINAL-PERNR
              SEQUENCENUMBER               = ls_evp-SEQNR
            READ_ONLY_INTERNATIONAL      = ''
            CHANGING
              PAYROLL_RESULT               = WI_PAYRESULT
            EXCEPTIONS
              ILLEGAL_ISOCODE_OR_CLUSTERID = 1
              ERROR_GENERATING_IMPORT      = 2
              IMPORT_MISMATCH_ERROR        = 3
              SUBPOOL_DIR_FULL             = 4
              NO_READ_AUTHORITY            = 5
              NO_RECORD_FOUND              = 6
              VERSIONS_DO_NOT_MATCH        = 7
              ERROR_READING_ARCHIVE        = 8
              ERROR_READING_RELID          = 9
              OTHERS                       = 10.
             endif.
        ENDLOOP.
        APPEND IT_FINAL.
      ENDLOOP.
      DELETE ADJACENT DUPLICATES FROM IT_FINAL COMPARING ALL FIELDS.
    ENDFORM.                    " GET_DATA
    *&      Form  BUILD_FIELD_CATLOG
          text
    -->  p1        text
    <--  p2        text
    FORM BUILD_FIELD_CATLOG .
      CLEAR FIELDCATALOG.
      FIELDCATALOG-FIELDNAME = 'PERNR'.
      FIELDCATALOG-SELTEXT_M = 'Emp Code'.
      FIELDCATALOG-COL_POS = WA_COLNO.
      FIELDCATALOG-OUTPUTLEN = 9.
      FIELDCATALOG-EMPHASIZE = 'X'.
      FIELDCATALOG-KEY       = 'X'.
      WA_COLNO = WA_COLNO + 1.
      APPEND FIELDCATALOG TO FIELDCATALOG.
      CLEAR FIELDCATALOG.
      FIELDCATALOG-FIELDNAME = 'ENAME'.
      FIELDCATALOG-SELTEXT_M = 'Emp Name'.
      FIELDCATALOG-COL_POS = WA_COLNO.
      FIELDCATALOG-OUTPUTLEN = 40.
      FIELDCATALOG-EMPHASIZE = 'X'.
      FIELDCATALOG-KEY       = 'X'.
      WA_COLNO = WA_COLNO + 1.
      APPEND FIELDCATALOG TO FIELDCATALOG.
      CLEAR FIELDCATALOG.
      FIELDCATALOG-FIELDNAME = 'PLSTX'.
      FIELDCATALOG-SELTEXT_M = 'Position'.
      FIELDCATALOG-COL_POS = WA_COLNO.
      FIELDCATALOG-OUTPUTLEN = 26.
      FIELDCATALOG-EMPHASIZE = 'X'.
      FIELDCATALOG-KEY       = 'X'.
      WA_COLNO = WA_COLNO + 1.
      APPEND FIELDCATALOG TO FIELDCATALOG.
      CLEAR FIELDCATALOG.
      FIELDCATALOG-FIELDNAME = 'BTEXT'.
      FIELDCATALOG-SELTEXT_M = 'Work Location'.
      FIELDCATALOG-COL_POS = WA_COLNO.
      FIELDCATALOG-OUTPUTLEN = 15.
      FIELDCATALOG-EMPHASIZE = 'X'.
      FIELDCATALOG-KEY       = 'X'.
      WA_COLNO = WA_COLNO + 1.
      APPEND FIELDCATALOG TO FIELDCATALOG.
      CLEAR FIELDCATALOG.
      FIELDCATALOG-FIELDNAME = 'ORGTX'.
      FIELDCATALOG-SELTEXT_M = 'Dept. Description'.
      FIELDCATALOG-COL_POS = WA_COLNO.
      FIELDCATALOG-OUTPUTLEN = 25.
      FIELDCATALOG-EMPHASIZE = 'X'.
      FIELDCATALOG-KEY       = 'X'.
      WA_COLNO = WA_COLNO + 1.
      APPEND FIELDCATALOG TO FIELDCATALOG.
      CLEAR FIELDCATALOG.
      FIELDCATALOG-FIELDNAME = 'PTEXT'.
      FIELDCATALOG-SELTEXT_M = 'Grade Set Code'.
      FIELDCATALOG-COL_POS = WA_COLNO.
      FIELDCATALOG-OUTPUTLEN = 21.
      FIELDCATALOG-EMPHASIZE = 'X'.
      FIELDCATALOG-KEY       = 'X'.
      WA_COLNO = WA_COLNO + 1.
      APPEND FIELDCATALOG TO FIELDCATALOG.
    ENDFORM.                    " BUILD_FIELD_CATLOG
    *&      Form  DISPLAY_DATA
          text
    -->  p1        text
    <--  p2        text
    FORM DISPLAY_DATA .
      REPID = SY-CPROG.
      CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
       EXPORTING
      I_INTERFACE_CHECK                 = ' '
      I_BYPASSING_BUFFER                = ' '
      I_BUFFER_ACTIVE                   = ' '
         I_CALLBACK_PROGRAM                =  REPID
      I_CALLBACK_PF_STATUS_SET          = ' '
      I_CALLBACK_USER_COMMAND           = ' '
      I_CALLBACK_TOP_OF_PAGE            =  'TOP-OF-PAGE'
      I_CALLBACK_HTML_TOP_OF_PAGE       = ' '
      I_CALLBACK_HTML_END_OF_LIST       = ' '
      I_STRUCTURE_NAME                  =
      I_BACKGROUND_ID                   = 'ALV_BACKGROUND'
      I_GRID_TITLE                      =
      I_GRID_SETTINGS                   =
      IS_LAYOUT                         = 'X'
         IT_FIELDCAT                       = FIELDCATALOG[]
      IT_EXCLUDING                      =
      IT_SPECIAL_GROUPS                 =
      IT_SORT                           =
      IT_FILTER                         =
      IS_SEL_HIDE                       =
         I_DEFAULT                         = 'X'
         I_SAVE                            = 'A'
      IS_VARIANT                        =
      IT_EVENTS                         =
      IT_EVENT_EXIT                     =
      IS_PRINT                          =
      IS_REPREP_ID                      =
      I_SCREEN_START_COLUMN             = 0
      I_SCREEN_START_LINE               = 0
      I_SCREEN_END_COLUMN               = 0
      I_SCREEN_END_LINE                 = 0
      I_HTML_HEIGHT_TOP                 = 0
      I_HTML_HEIGHT_END                 = 0
      IT_ALV_GRAPHICS                   =
      IT_HYPERLINK                      =
      IT_ADD_FIELDCAT                   =
      IT_EXCEPT_QINFO                   =
      IR_SALV_FULLSCREEN_ADAPTER        =
    IMPORTING
      E_EXIT_CAUSED_BY_CALLER           =
      ES_EXIT_CAUSED_BY_USER            =
        TABLES
          T_OUTTAB                          = IT_FINAL
       EXCEPTIONS
         PROGRAM_ERROR                     = 1
         OTHERS                            = 2
      IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    ENDFORM.                    " DISPLAY_DATA

  • Porblem in PYXX_READ_PAYROLL_RESULT

    hi experts...!
    i have problem in retrieving betrg amount basic pay 0001 from that moudule........some one help me....!
    my code is
    select  info~pernr info~abkrs info~persg bas~endda bas~begda
        into corresponding fields of table itab
                    from pa0001 as info inner join pa0008 as bas
                    on info~pernr eq bas~pernr
                    where
                         info~pernr in s_pernr and
                         info~abkrs in s_payrol and
                         info~persg in s_empgrp and
                         bas~begda ge s_begda and
                         bas~endda le s_endda  .
    sort itab by pernr.
        loop at itab.
          select single ename plans into (itab-ename, itab-plans)
            from pa0001
            where pernr eq itab-pernr.
            translate itab-ename to upper case.
            select single plstx into itab-plstx
              from t528t
              where plans eq itab-plans and
              sprsl eq 'EN'.
              translate itab-plstx to upper case.
            modify itab.
          endloop.
      endform.
    Edited by: BFawad26 on Aug 10, 2010 3:25 PM

    data : p_inper like hrpy_rgdir-inper.
      p_inper = st_date(6).
    loop at itab where persg in s_empgrp.
        select single * from hrpy_rgdir
                        where
                          fpbeg = itab-begda
                         and fpend = itab-endda
    and pernr eq itab-pernr
                          and payty ne 'A'
                          and srtza = 'A'.
        if sy-subrc eq 0.
          call function 'PYXX_READ_PAYROLL_RESULT'
            exporting
             clusterid                    = 'RX'
              employeenumber               = itab-pernr
              sequencenumber               = hrpy_rgdir-seqnr
            changing
              payroll_result               = ls_result
            exceptions
              illegal_isocode_or_clusterid = 1
              error_generating_import      = 2
              import_mismatch_error        = 3
              subpool_dir_full             = 4
              no_read_authority            = 5
              no_record_found              = 6
              versions_do_not_match        = 7
              error_reading_archive        = 8
              error_reading_relid          = 9
              others                       = 10.
          if sy-subrc <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
          endif.
          loop at ls_result-inter-rt into wa_rt.
            case wa_rt-lgart.
              when '/559'.
                itab-payment      = wa_rt-betrg.
              when '0001'.
                itab-basicpay      = itab-basicpay + wa_rt-betrg.
            "Wage Type 06 addition 30th July 2010 (Kamran)
             when '0006'.
                itab-basicpay      = itab-basicpay + wa_rt-betrg.
             when '/557'.
                itab-payment       = wa_rt-betrg.
            endcase.
          endloop.
          append itab.
        endif.
        clear itab.
      endloop.
      endform.
    Edited by: BFawad26 on Aug 10, 2010 3:27 PM

  • A problem with threads

    I am trying to implement some kind of a server listening for requests. The listener part of the app, is a daemon thread that listens for connections and instantiates a handling daemon thread once it gets some. However, my problem is that i must be able to kill the listening thread at the user's will (say via a sto button). I have done this via the Sun's proposed way, by testing a boolean flag in the loop, which is set to false when i wish to kill the thread. The problem with this thing is the following...
    Once the thread starts excecuting, it will test the flag, find it true and enter the loop. At some point it will LOCK on the server socket waiting for connection. Unless some client actually connects, it will keep on listening indefinatelly whithought ever bothering to check for the flag again (no matter how many times you set the damn thing to false).
    My question is this: Is there any real, non-theoretical, applied way to stop thread in java safely?
    Thank you in advance,
    Lefty

    This was one solution from the socket programming forum, have you tried this??
    public Thread MyThread extends Thread{
         boolean active = true;          
         public void run(){
              ss.setSoTimeout(90);               
              while (active){                   
                   try{                       
                        serverSocket = ss.accept();
                   catch (SocketTimeoutException ste){
                   // do nothing                   
         // interrupt thread           
         public void deactivate(){               
              active = false;
              // you gotta sleep for a time longer than the               
              // accept() timeout to make sure that timeout is finished.               
              try{
                   sleep(91);               
              }catch (InterruptedException ie){            
              interrupt();
    }

  • A problem with Threads and MMapi

    I am tring to execute a class based on Game canvas.
    The problem begin when I try to Play both a MIDI tone and to run an infinit Thread loop.
    The MIDI tone "Stammers".
    How to over come the problem?
    Thanks in advance
    Kobi
    See Code example below:
    import java.io.IOException;
    import java.io.InputStream;
    import javax.microedition.lcdui.Graphics;
    import javax.microedition.lcdui.Image;
    import javax.microedition.lcdui.game.GameCanvas;
    import javax.microedition.media.Manager;
    import javax.microedition.media.MediaException;
    import javax.microedition.media.Player;
    public class MainScreenCanvas extends GameCanvas implements Runnable {
         private MainMIDlet parent;
         private boolean mTrucking = false;
         Image imgBackgound = null;
         int imgBackgoundX = 0, imgBackgoundY = 0;
         Player player;
         public MainScreenCanvas(MainMIDlet parent)
              super(true);
              this.parent = parent;
              try
                   imgBackgound = Image.createImage("/images/area03_bkg0.png");
                   imgBackgoundX = this.getWidth() - imgBackgound.getWidth();
                   imgBackgoundY = this.getHeight() - imgBackgound.getHeight();
              catch(Exception e)
                   System.out.println(e.getMessage());
          * starts thread
         public void start()
              mTrucking = true;
              Thread t = new Thread(this);
              t.start();
          * stops thread
         public void stop()
              mTrucking = false;
         public void play()
              try
                   InputStream is = getClass().getResourceAsStream("/sounds/scale.mid");
                   player = Manager.createPlayer(is, "audio/midi");
                   player.setLoopCount(-1);
                   player.prefetch();
                   player.start();
              catch(Exception e)
                   System.out.println(e.getMessage());
         public void run()
              Graphics g = getGraphics();
              play();
              while (true)
                   tick();
                   input();
                   render(g);
          * responsible for object movements
         private void tick()
          * response to key input
         private void input()
              int keyStates = getKeyStates();
              if ((keyStates & LEFT_PRESSED) != 0)
                   imgBackgoundX++;
                   if (imgBackgoundX > 0)
                        imgBackgoundX = 0;
              if ((keyStates & RIGHT_PRESSED) != 0)
                   imgBackgoundX--;
                   if (imgBackgoundX < this.getWidth() - imgBackgound.getWidth())
                        imgBackgoundX = this.getWidth() - imgBackgound.getWidth();
          * Responsible for the drawing
          * @param g
         private void render(Graphics g)
              g.drawImage(imgBackgound, imgBackgoundX, imgBackgoundY, Graphics.TOP | Graphics.LEFT);
              this.flushGraphics();
    }

    You can also try to provide a greater Priority to your player thread so that it gains the CPU time when ever it needs it and don't harm the playback.
    However a loop in a Thread and that to an infinite loop is one kind of very bad programming, 'cuz the loop eats up most of your CPU time which in turn adds up more delays of the execution of other tasks (just as in your case it is the playback). By witting codes bit efficiently and planning out the architectural execution flow of the app before start writing the code helps solve these kind of issues.
    You can go through [this simple tutorial|http://oreilly.com/catalog/expjava/excerpt/index.html] about Basics of Java and Threads to know more about threads.
    Regds,
    SD
    N.B. And yes there are more articles and tutorials available but much of them targets the Java SE / EE, but if you want to read them here is [another great one straight from SUN|http://java.sun.com/docs/books/tutorial/essential/concurrency/index.html] .
    Edited by: find_suvro@SDN on 7 Nov, 2008 12:00 PM

  • J2ME problem with threads

    Hi all,
    I would like to ask you for a help. I need to write a small program at my university. I started to write a midlet which function would be to countdown time for sports activities. I woul like to start a new thread - the one that counts down - and at the same time make the main thread sleep. After the "countdown" thread finishes, the main thread wakes up and waits for user input. The problem is that when the "countdown" thread finishes his work, I've got Uncaught exception java/lang/NullPointerException. error and the midlet halts.
    Below you can find the code
    import java.lang.*;
    import java.util.*;
    import javax.microedition.lcdui.*;
    import javax.microedition.midlet.*;
    public class intervals extends MIDlet implements CommandListener
    public Display ekran;
    private SweepCanvas sweeper;
    private Form rundy;
    private TextField round0, round1, round2, round3, round4, round5, round6, round7, round8;
    private long czas,x;
    private Command exitCommand;
    private Command addRound;
    private Command delRound;
    private Command start;
    private TextField repeat;
    private Form odliczanie;
    private Alert ostrz;
    Licznik thread;
    String test;
    StringItem test1;
    int parz,i,j,k;
    static int l;
    int ilrund;
    int ilpowt;
    Item sec;
    long sec1;
    public intervals()
        rundy = new Form("Interwa&#322;y sportowe");
        exitCommand = new Command("Wyj&#347;cie", Command.EXIT, 2);
        addRound = new Command("Dodaj","Dodaj rund&#281;", Command.ITEM,1);
        delRound = new Command("Usu&#324;","Usu&#324; ostatni&#261; rund&#281;", Command.ITEM,1);
        start = new Command("Start", Command.ITEM,1);
        odliczanie = new Form("Odliczanie");
        TextField dodaj(TextField kolej)
            kolej=new TextField("Podaj czas (s) rundy "+parz,null, 4, TextField.NUMERIC);//stworzenie nowej instancji do wybierania czasu trwania rundy
            if(rundy.size()==0)
                rundy.insert(rundy.size(),kolej);
                else
                    rundy.insert(rundy.size()-1, kolej);
            return kolej;
        void odliczanie(TextField round)
            monitor m=new monitor();
            k=Integer.parseInt(round.getString());
            ekran.setCurrent(odliczanie);
            thread=new Licznik(k,odliczanie);
            thread.start();
            ekran.setCurrent(rundy);
    public void startApp()// throws MIDletStateChangeException
        rundy.deleteAll();
        repeat = new TextField("Podaj ilo&#347;&#263; powtórze&#324;",null,1,TextField.NUMERIC);
        rundy.addCommand(addRound);
        rundy.addCommand(exitCommand);
        rundy.setCommandListener(this);
        Canvas obrazek = new MyCanvas();
        ekran = Display.getDisplay(this);
        ekran.setCurrent(obrazek);
        czas=System.currentTimeMillis();
        while (System.currentTimeMillis()<czas+1000)
            continue;
        ekran.setCurrent(rundy);
    public void pauseApp()
    public void destroyApp(boolean unconditional)
        notifyDestroyed();
    public void commandAction(Command c, Displayable s)
        if (c == exitCommand)
            destroyApp(false);
            notifyDestroyed();
        else if(c==addRound)
            if(rundy.size()==0)//Sprawdzenie ilo&#347;ci elementów w celu poprawnego wy&#347;wietlania liczby rund w formie
                parz=1;
                else
                parz=rundy.size();
            switch(parz)
                case 1:
                    round0=dodaj(round0);break;
                case 2:
                    round1=dodaj(round1);break;
                case 3:
                   round2= dodaj(round2);break;
                case 4:
                    round3=dodaj(round3);break;
                case 5:
                    round4=dodaj(round4);break;
                default:
                    ostrz=new Alert("Uwaga","Maksymalna liczba rund wynosi 9", null, AlertType.INFO);
                    ostrz.setTimeout(3000);
                    ekran.setCurrent(ostrz);
            if(rundy.size()==1)
                rundy.append(repeat);
                rundy.addCommand(start);
            rundy.addCommand(delRound);
        else if(c==delRound)
            if(rundy.size()!=0)
                rundy.delete(rundy.size()-2);
                if (rundy.size()==1)
                    rundy.deleteAll();
                if(rundy.size()==0)
                    rundy.removeCommand(delRound);
                    rundy.removeCommand(start);
        else if(c==start)
            ilrund=rundy.size()-1;
            if(this.repeat.size()>0)
                ilpowt=Integer.parseInt(this.repeat.getString());
            ekran = Display.getDisplay(this);
            for (i=1; i<=ilpowt;i++)
                odliczanie= new Form("Odliczanie");
                 for (j=0;j<ilrund;j++)
                    switch(j)
                         case 0:
                             odliczanie(round0);
                             break;
                         case 1:
                             odliczanie(round1);
                             break;
                         case 2:
                             odliczanie(round2);
                             break;
                         case 3:
                             odliczanie(round3);
                             break;
                         case 4:
                             odliczanie(round4);
                             break;
                         case 5:
                             odliczanie(round5);
                             break;
                         case 6:
                             odliczanie(round6);
                             break;
                         case 7:
                             odliczanie(round7);
                             break;
                         case 8:
                             odliczanie(round8);
                             break;
    class Licznik extends Thread
        int czas1,k;
        Form forma;
        monitor m;
        public Licznik(int k,Form formap)
            czas1=k;
            forma=formap;
        public synchronized void run()
            while(czas1>0)
                forma.deleteAll();
                forma.append("Czas pozosta&#322;y (s): "+czas1);
                try{Thread.sleep(1000);} catch(InterruptedException e){e.printStackTrace();}
                czas1--;
            if(czas1<=0)
                m.put();
        }and monitor class
    public class monitor
    boolean busy=false;
    synchronized void get()
        if(!busy)
            try
                wait();
            }catch(InterruptedException e){e.printStackTrace();}
        notify();
    synchronized void put()
        if(busy)
            try
            wait();
            }catch(InterruptedException e){e.printStackTrace();}
        busy=true;
        notify();
    }Can anybody help me with this?

    Groovemaker,
    Your Licznik class has a member m of type monitor, which has not been instantiated (in other words is null) hence, when calling m.put() you get NullPointerException. Please also mind, that using Thread.sleep(1000) is not an accurate way of measuring time.
    If I may, please use recommended for Java class naming conventions - some of your names use lower case, while other don't which is confusing to the reader.
    Daniel

  • Problem with threads within applet

    Hello,
    I got an applet, inside this applet I have a singleton, inside this singleton I have a thread.
    this thread is running in endless loop.
    he is doing something and go to sleep on and on.
    the problem is,
    when I refresh my IE6 browser I see more than 1 thread.
    for debug matter, I did the following things:
    inside the thread, sysout every time he goes to sleep.
    sysout in the singleton constructor.
    sysout in the singleton destructor.
    the output goes like this:
    when refresh the page, the singleton constructor loading but not every refresh, sometimes I see the constructor output and sometimes I dont.
    The thread inside the singleton is giving me the same output, sometime I see more than one thread at a time and sometimes I dont.
    The destructor never works (no output there).
    I don't understand what is going on.
    someone can please shed some light?
    thanks.
    btw. I am working with JRE 1.1
    this is very old and big applet and I can't convert it to something new.

    Ooops. sorry!
    I did.
         public void start() {
         public void stop() {
         public void destroy() {
              try {
                   resetAll();
                   Configuration.closeConnection();
                   QuoteItem.closeConnection();
              } finally {
                   try {
                        super.finalize();
                   } catch (Throwable e) {
                        e.printStackTrace();
         }

  • Problem with Threads and a static variable

    I have a problem with the code below. I am yet to make sure that I understand the problem. Correct me if I am wrong please.
    Code functionality:
    A timer calls SetState every second. It sets the state and sets boolean variable "changed" to true. Then notifies a main process thread to check if the state changed to send a message.
    The problem as far I understand is:
    Assume the timer Thread calls SetState twice before the main process Thread runs. As a result, "changed" is set to true twice. However, since the main process is blocked twice during the two calls to SetState, when it runs it would have the two SetState timer threads blocked on its synchronized body. It will pass the first one, send the message and set "changed" to false since it was true. Now, it will pass the second thread, but here is the problem, "changed" is already set to false. As a result, it won't send the message even though it is supposed to.
    Would you please let me know if my understanding is correct? If so, what would you propose to resolve the problem? Should I call wait some other or should I notify in a different way?
    Thanks,
    B.D.
    Code:
    private static volatile boolean bChanged = false;
    private static Thread objMainProcess;
       protected static void Init(){
            objMainProcess = new Thread() {
                public void run() {
                    while( objMainProcess == Thread.currentThread() ) {
                       GetState();
            objMainProcess.setDaemon( true );
            objMainProcess.start();
        public static void initStatusTimer(){
            if(objTimer == null)
                 objTimer = new javax.swing.Timer( 1000, new java.awt.event.ActionListener(){
                    public void actionPerformed( java.awt.event.ActionEvent evt){
                              SetState();
        private static void SetState(){
            if( objMainProcess == null ) return;
            synchronized( objMainProcess ) {
                bChanged = true;
                try{
                    objMainProcess.notify();
                }catch( IllegalMonitorStateException e ) {}
        private static boolean GetState() {
            if( objMainProcess == null ) return false;
            synchronized( objMainProcess ) {
                if( bChanged) {
                    SendMessage();
                    bChanged = false;
                    return true;
                try {
                    objMainProcess.wait();
                }catch( InterruptedException e ) {}
                return false;
        }

    Thanks DrClap for your reply. Everything you said is right. It is not easy to make them alternate since SetState() could be called from different places where the state could be anything else but a status message. Like a GREETING message for example. It is a handshaking message but not a status message.
    Again as you said, There is a reason I can't call sendMessage() inside setState().
    The only way I was able to do it is by having a counter of the number of notifies that have been called. Every time notify() is called a counter is incremented. Now instead of just checking if "changed" flag is true, I also check if notify counter is greater than zero. If both true, I send the message. If "changed" flag is false, I check again if the notify counter is greater than zero, I send the message. This way it works, but it is kind of a patch than a good design fix. I am yet to find a good solution.
    Thanks,
    B.D.

  • Problem with threads running javaw

    Hi,
    Having a problem with multi thread programming using client server sockets. The program works find when starting the the application in a console using java muti.java , but when using javaw multi.java the program doesnt die and have to kill it in the task manager. The program doesnt display any of my gui error messages either when the server disconnect the client. all works find in a console. any advice on this as I havent been able to understand why this is happening? any comment would be appreciated.
    troy.

    troy,
    Try and post a minimum code sample of your app which
    does not work.
    When using javaw, make sure you redirect the standard
    error and standard output streams to file.
    Graeme.Hi Graeme,
    I dont understand what you mean by redirection to file? some of my code below.
    The code works fine under a console, code is supposed to exit when the client (the other server )disconnects. the problem is that but the clientworker side of the code still works. which under console it doesnt.
    public class Server{
    ServerSocket aServerSocket;
    Socket dianosticsSocket;
    Socket nPortExpress;
    ClientListener aClientListener;
    LinkedList queue = new LinkedList();
    int port = 0;
    int clientPort = 0;
    String clientName = null;
    boolean serverAlive = true;
    * Server constructor generates a server
    * Socket and then starts a client threads.
    * @param aPort      socket port of local machine.
    public Server(int aPort, String aClientName, int aClientPort){
    port = aPort;
    clientName = aClientName;
    clientPort = aClientPort;
    try{
    // create a new thread
    aServerSocket = new ServerSocket(port) ;
    // connect to the nPortExpress
    aClientListener = new ClientListener(InetAddress.getByName(clientName), clientPort, queue,this);
    // aClientListener.setDaemon(true);
    aClientListener.start();
    // start a dianostic port
    DiagnosticsServer aDiagnosticsServer = new DiagnosticsServer(port,queue,aClientListener);
    // System.out.println("Server is running on port " + port + "...");
    // System.out.println("Connect to nPort");
    catch(Exception e)
    // System.out.println("ERROR: Server port " + port + " not available");
    JOptionPane.showMessageDialog(null, (e.toString()),"ERROR: Server port " + port + " not available", JOptionPane.ERROR_MESSAGE);
    serverAlive = false;
    System.exit(1);
    while(serverAlive&&aClientListener.hostSocket.isConnected()){
    try{
    // connect the client
    Socket aClient = aServerSocket.accept();
    //System.out.println("open client connection");
    //System.out.println("client local: "+ aClient.getLocalAddress().toString());
    // System.out.println("client localport: "+ aClient.getLocalPort());
    // System.out.println("client : "+ aClient.getInetAddress().toString());
    // System.out.println("client port: "+ aClient.getLocalPort());
    // make a new client thread
    ClientWorker clientThread = new ClientWorker(aClient, queue, aClientListener, false);
    // start thread
    clientThread.start();
    catch(Exception e)
    //System.out.println("ERROR: Client connection failure");
    JOptionPane.showMessageDialog(null, (e.toString()),"ERROR: Client connection failure", JOptionPane.ERROR_MESSAGE);
    }// end while
    } // end constructor Server
    void serverExit(){
         JOptionPane.showMessageDialog(null, "Server ","ERROR: nPort Failure", JOptionPane.ERROR_MESSAGE);
         System.exit(1);
    }// end class Server
    *** connect to another server
    public class ClientListener extends Thread{
    InetAddress hostName;
    int hostPort;
    Socket hostSocket;
    BufferedReader in;
    PrintWriter out;
    boolean loggedIn;
    LinkedList queue;      // reference to Server queue
    Server serverRef; // reference to main server
    * ClientListener connects to the host server.
    * @param aHostName is the name of the host eg server name or IP address.
    * @param aHostPort is a port number of the host.
    * @param aLoginName is the users login name.
    public ClientListener(InetAddress aHostName, int aHostPort,LinkedList aQueue,Server aServer)      // reference to Server queue)
    hostName = aHostName;
    hostPort = aHostPort;
    queue = aQueue;
    serverRef = aServer;      
    // connect to the server
    try{
    hostSocket = new Socket(hostName, hostPort);
    catch(IOException e){
    //System.out.println("ERROR: Connection Host Failed");
    JOptionPane.showMessageDialog(null, (e.toString()),"ERROR: Connection to nPort Failed", JOptionPane.ERROR_MESSAGE);     
    System.exit(0);
    } // end constructor ClientListener
    ** multi client connection server
    ClientWorker(Socket aSocket,LinkedList aQueue, ClientListener aClientListener, boolean diagnostics){
    queue = aQueue;
    addToQueue(this);
    client = aSocket;
    clientRef = aClientListener;
    aDiagnostic = diagnostics;
    } // end constructor ClientWorker
    * run method is the main loop of the server program
    * in change of handle new client connection as well
    * as handle all messages and errors.
    public void run(){
    boolean alive = true;
    String aSubString = "";
    in = null;
    out = null;
    loginName = "";
    loggedIn = false;
    while (alive && client.isConnected()&& clientRef.hostSocket.isConnected()){
    try{
    in = new BufferedReader(new InputStreamReader(client.getInputStream()));
    out = new PrintWriter(new OutputStreamWriter(client.getOutputStream()));
    if(aDiagnostic){
    out.println("WELCOME to diagnostics");
    broadCastDia("Connect : diagnostics "+client.getInetAddress().toString());
    out.flush();
    else {       
    out.println("WELCOME to Troy's Server");
    broadCastDia("Connect : client "+client.getInetAddress().toString());
         out.flush();
    String line;
    while(((line = in.readLine())!= null)){
    StringTokenizer aStringToken = new StringTokenizer(line, " ");
    if(!aDiagnostic){
    broadCastDia(line);
    clientRef.sendMessage(line); // send mesage out to netExpress
    out.println(line);
    out.flush();
    else{
    if(line.equals("GETIPS"))
    getIPs();
    else{
    clientRef.sendMessage(line); // send mesage out to netExpress
    out.println(line);
    out.flush();
    } // end while
    catch(Exception e){
    // System.out.println("ERROR:Client Connection reset");
                             JOptionPane.showMessageDialog(null, (e.toString()),"ERROR:Client Connection reset", JOptionPane.ERROR_MESSAGE);     
    try{
    if(aDiagnostic){
    broadCastDia("Disconnect : diagnostics "+client.getInetAddress().toString());
    out.flush();
    else {       
    broadCastDia("Disconnect : client "+client.getInetAddress().toString());
         out.flush();
    // close the buffers and connection;
    in.close();
    out.close();
    client.close();
    // System.out.println("out");
    // remove from list
    removeThreadQueue(this);
    alive = false;
    catch(Exception e){
    // System.out.println("ERROR: Client Connection reset failure");
    JOptionPane.showMessageDialog(null, (e.toString()),"ERROR: Client Connection reset failure", JOptionPane.ERROR_MESSAGE);     
    }// end while
    } // end method run
    * method run - Generates io stream for communicating with the server and
    * starts the client gui. Run also parses the input commands from the server.
    public void run(){
    boolean alive = true;
    try{
    // begin to life the gui
    // aGuiClient = new ClientGui(hostName.getHostName(), hostPort, loginName, this);
    // aGuiClient.show();
    in = new BufferedReader(new InputStreamReader(hostSocket.getInputStream()));
    out = new PrintWriter(new OutputStreamWriter(hostSocket.getOutputStream()));
    while (alive && hostSocket.isConnected()){
    String line;
    while(((line = in.readLine())!= null)){
    System.out.println(line);
    broadCast(line);
    } // end while
    } // end while
    catch(Exception e){
    //     System.out.println("ERRORa Connection to host reset");
    JOptionPane.showMessageDialog(null, (e.toString()),"ERROR: Connection to nPort reset", JOptionPane.ERROR_MESSAGE);
    try{
    hostSocket.close();
         }catch(Exception a){
         JOptionPane.showMessageDialog(null, (a.toString()),"ERROR: Exception", JOptionPane.ERROR_MESSAGE);
    alive = false;
    System.exit(1);
    } // end method run

  • Problem with Threads and "plase wait..."-Window

    Hi everyone,
    I have a problem that I'm not able to solve in any way... I have a time-consuming task (a file decryption) which I execute in a separate thread; I've used the SwingWorker class, like suggested by sun-tutorial, and it works right. The problem is that I have to wait that the decryption have finished before continuing with program-execution. Therefore I would like to display a "please wait"-window while the task runs. I've tryed all the possible ways I know but the problem is always the same: the waitWindow is displayed empty, the bounds are painted but the contents no; it's only painted when the decrypt-task has finished. Please help me, I have no more resources....
    decrypt-file code:
    public class DecryptFile {
      private String cryptedFileNameAndPath;
      private ByteArrayInputStream resultStream = null;
      // need for progress
      private int lengthOfTask;
      private int current = -1;
      private String statMessage;
      public DecryptFile(String encZipFileNameAndPath) {
        cryptedFileNameAndPath = encZipFileNameAndPath;
        //Compute length of task...
        // 0 for indeterminate
        lengthOfTask = 0;
      public ByteArrayInputStream getDecryptedInputStream() {
        return this.resultStream;
       * Called from ProgressBarDemo to start the task.
      public void go() {
        current = -1;
        final SwingWorker worker = new SwingWorker() {
          public Object construct() {
            return new ActualTask();
        worker.start();
       * Called from ProgressBarDemo to find out how much work needs
       * to be done.
      public int getLengthOfTask() {
        return lengthOfTask;
       * Called from ProgressBarDemo to find out how much has been done.
      public int getCurrent() {
        return current;
      public void stop() {
        current = lengthOfTask;
       * Called from ProgressBarDemo to find out if the task has completed.
      public boolean done() {
        if (current >= lengthOfTask)
          return true;
        else
          return false;
      public String getMessage() {
        return statMessage;
       * The actual long running task.  This runs in a SwingWorker thread.
      class ActualTask {
        ActualTask () {
          current = -1;
          statMessage = "";
          resultStream = AIUtil.getInputStreamFromEncZip(cryptedFileNameAndPath); //here the decryption happens
          current = 0;
          statMessage = "";
      }The code that calls decryption and displays waitWindow
          final WaitSplash wS = new WaitSplash("Please wait...");
          final DecryptFile cryptedTemplate = new DecryptFile (this.templateFile);
          cryptedTemplate.go();
          while (! cryptedTemplate.done()) {
            try {
              wait();
            } catch (Exception e) { }
          this.templateInputStream = cryptedTemplate.getDecryptedInputStream();
          wS.close();Thanks, thanks, thanks in advance!
    Edoardo

    Maybe you can try setting the priority of the long-running thread to be lower? so that the UI will be more responsive...

  • Problem with threads in j2me

    im using jdk 1.6 with java wtk 2.1
    ya i know..
    2.1 is a jdk1.4 source
    but im using souce as 1.4 during compiliation so thats not the prob
    this is my code
    package org.learn;
    import javax.microedition.midlet.MIDlet;
    import javax.microedition.lcdui.Alert;
    import javax.microedition.lcdui.Display;
    public class thtest extends MIDlet
    Thread t;
    public void startApp()
    Alert a=new Alert("hello");
    a.setString("hello");
    Alert b=new Alert("world");
    b.setString("world");
    Display d = Display.getDisplay(this );
    d.setCurrent(a);
    t=Thread.currentThread();
    try{
    t.sleep(10000);
    catch (Exception e){}
    d.setCurrent(b);
    public void pauseApp()
    public void destroyApp(boolean unconditional)
    its just supposed to pause between the alerts using threads
    however when i run it using the wtk, the emulator run properly but when i launch the app, it stops executing giving me this:
    "Error verifying method org/learn/thtest startApp()V
    Approximate bytecode offset 49: Inconsistent or missing stackmap at target
    %the stack info%
    Execution completed.
    437782 bytecodes executed
    9 thread switches
    486 classes in the system (including system classes)
    2506 dynamic objects allocated (73832 bytes)
    2 garbage collections (60652 bytes collected)
    Execution completed.
    437782 bytecodes executed
    9 thread switches
    486 classes in the system (including system classes)
    ALERT: java/lang/VerifyError: org/learn/thtest.
    2506 dynamic objects allocated (73832 bytes)
    2 garbage collections (60652 bytes collected)
    please can someone help me out with this, is it an error on my part or do i have to set some option.

    Hi gandalf123,
    First, Thread.sleep is a static method, so you don't need to create a Thread object to use it.
    I think the problem is due to the fact you don't preverify your midlet.
    More over, you don't need to double post your question.

  • Problem with threads and camera.

    Hi everybody!
    I've a problem with taking snapshot.
    I would like to display a loading screen after it take snapshot ( sometimes i
    have to wait few seconds after i took snapshot. Propably photo is being taken in time where i have to wait).
    I was trying to use threads but i didn't succeed.
    I made this code:
    display.setCurrent(perform);               
            new Thread(new Runnable(){
                public void run() {               
                    while((!performing.isShown()) && (backgroundCamera.isShown())){
                        Thread.yield();
                    notifyAll();
            }).start();
            new Thread(new Runnable(){
                public void run() {
                    try {
                        this.wait();                   
                    } catch(Exception e) {
                        exceptionHandler(e);
                    photo = camera.snapshot();                               
                    display.setCurrent(displayPhoto);
            }).start();This code is sometimes showing performing screen but sometimes no.
    I don't know why. In my opinion performing.isShown() method isn't working correctly.
    Does anyone have some idea how to use threads here?

    Hi,
    I've finally managed to work this fine.
    The code:
           Object o = new Object();
           display.setCurrent(perform);               
            new Thread(new Runnable(){
                public void run() {               
                    while(!performing.isShown()){
                        Thread.yield();
                   synchronized(o) {
                      o.notify();
            }).start();
            new Thread(new Runnable(){
                public void run() {
                    try {
                        synchronized(o) {
                           o.wait(1);
                    } catch(Exception e) {
                        exceptionHandler(e);
                    photo = camera.snapshot();                               
                    display.setCurrent(displayPhoto);
            }).start();

  • Problem with threads and graphics

    I have a thread that chooses paths for a Travelling salesman problem, it then calls a TSPdraw class and passes it the path, which the class then draws. the problem is when i have two threads it creates two windows but only draws a path in one of them. any ideas where i`m going wrong

    Are you using swing components? Swing isn't threadsafe. If you have multiple threads that want to update your UI you need to use the SwingUtilities.invokeLater(...)or invokeAndWait(...). There is a page in the swing tutorial about this at: http://java.sun.com/docs/books/tutorial/uiswing/misc/threads.html

  • Problem with threads hanging

    We have a problem where our application stops responding after a few days of usage. Things will for fine for a day or two, and then pretty quickly threads will start getting hung up, usually in places where they are allocating memory
    We are running WebLogic 8.1 SP2 on Sun JDK 1.4.2_04 on Solaris 8 using the alternate threading model and the -server hotspot vm. We are running pretty much the same code that we had no problems with under WebLogic 6.1 SP4 and Sun JDK 1.3.1.
    A thread dump usually shows that some or all of our execute threads are in the state "waiting for monitor entry" even though they are not currently waiting on any java locks. Here is a sample thread from the thread dump (we have ~120 threads so I don't want to post the full dump).
    =============================================================================================
    "ExecuteThread: '8' for queue: 'itgCrmWarExecutionQueue'" daemon prio=5 tid=0x005941d0 nid=0x2c waiting for monitor entry [c807f000..c807fc28]
    at java.lang.String.substring(String.java:1446)
    at java.lang.String.substring(String.java:1411)
    at weblogic.servlet.internal.ServletRequestImpl.getRelativeUri(ServletRequestImpl.java:1872)
    at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3492)
    at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2585)
    at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
    =============================================================================================
    String.java line 1446 for this jdk allocates a new String object, and all the other threads in this state also are creating new objects or arrays, etc.
    We've done a pstack on this process when it's in this state, and the threads that are in the "waiting for monitor entry" that look like they're allocating memory are all waiting on the same lwp_mutex_lock with some allocation method that's calling into the native TwoGenerationCollectorPolicy.mem_allocate_work (see pstack output below for the same thread as in the thread dump above)
    =============================================================================================
    ----------------- lwp# 44 / thread# 44 --------------------
    ff31f364 lwp_mutex_lock (e3d70)
    fee92384 __1cNObjectMonitorGenter26MpnGThread__v_ (5000, 525c, 5000, 50dc, 4800, 4af0) + 2d8
    fee324d4 __1cSObjectSynchronizerKfast_enter6FnGHandle_pnJBasicLock_pnGThread__v_ (c807f65c, c807f7d4, 5941d0, 0, 35d654, fee328ec) + 68
    fee32954 __1cQinstanceRefKlassZacquire_pending_list_lock6FpnJBasicLock__v_ (c807f7d4, ff170000, d4680000, 4491d4, fee1bc2c,
    0) + 78
    fee3167c __1cPVM_GC_OperationNdoit_prologue6M_i_ (c807f7bc, 4400, ff170000, 2d2b8, 4a6268, c807fa18) + 38
    fee2e0b0 __1cIVMThreadHexecute6FpnMVM_Operation__v_ (c807f7bc, 963a8, 0, 0, 1, 0) + 90
    fed2c2a4 __1cbCTwoGenerationCollectorPolicyRmem_allocate_work6MIii_pnIHeapWord__ (962c0, ff1c29ec, ff1c297c, ff131a26, 4800, 4998) + 160
    fed22940 __1cNinstanceKlassRallocate_instance6MpnGThread__pnPinstanceOopDesc__ (ee009020, 5941d0, 15ca581, 3647f0, 4a6268, c807f8c8) + 180
    fed34928 __1cLOptoRuntimeFnew_C6FpnMklassOopDesc_pnKJavaThread__v_ (ee009018, 5941d0, 0, 0, 0, 0) + 28
    fa435a58 ???????? (ee009018, e86de, 15ca4de, 50dc, 5941d0, c807f9c8)
    fb36f9a4 ???????? (0, d412ccd8, ee046c28, ff170000, 0, 0)
    fad8b278 ???????? (ee046c28, d6000c90, ee046530, 8, db8e8450, c807f9e8)
    fad62abc ???????? (d412ccd8, ee046530, d6000c90, ee3bfa38, 8, c807fa18)
    fa4b3c38 ???????? (c807fb9c, 0, f2134700, fa415e50, 8, c807faa8)
    fa40010c ???????? (c807fc28, c807fe90, a, ee9e1e20, 4, c807fb40)
    fed5d48c __1cJJavaCallsLcall_helper6FpnJJavaValue_pnMmethodHandle_pnRJavaCallArguments_pnGThread__v_ (c807fe88, c807fcf0, c807fda8, 5941d0, 5941d0, c807fd00) + 27c
    fee4b784 __1cJJavaCallsMcall_virtual6FpnJJavaValue_nLKlassHandle_nMsymbolHandle_4pnRJavaCallArguments_pnGThread__v_ (ff170000, 594778, c807fd9c, c807fd98, c807fda8, 5941d0) + 164
    fee5e8dc __1cJJavaCallsMcall_virtual6FpnJJavaValue_nGHandle_nLKlassHandle_nMsymbolHandle_5pnGThread__v_ (c807fe88, c807fe84, c807fe7c, c807fe74, c807fe6c, 5941d0) + 6c
    fee6fc74 __1cMthread_entry6FpnKJavaThread_pnGThread__v_ (5941d0, 5941d0, 838588, 594778, 306d10, fee69254) + 128
    fee6927c __1cKJavaThreadDrun6M_v_ (5941d0, 2c, 40, 0, 40, 0) + 284
    fee6575c _start   (5941d0, fa1a1600, 0, 0, 0, 0) + 134
    ff3758c0 lwpstart (0, 0, 0, 0, 0, 0)
    =============================================================================================
    Also when it's having this problem, the "VM Thread" is always using a lot of processor time. We did a couple of pstacks today while it was having this problem, and this thread was stuck in the ONMethodSweeper.sweep for over 15 minutes when we finally killed the server.
    From the thread dump:
    "VM Thread" prio=5 tid=0x000e2d20 nid=0x2 runnable
    From the first pstack:
    =============================================================================================
    ----------------- lwp# 2 / thread# 2 --------------------
    fed40c04 __1cXvirtual_call_RelocationIparse_ic6FrpnICodeBlob_rpC5rppnHoopDesc_pi_nNRelocIterator__ (42a2f4, fa5fa46d, ffffffff, fc4ffcb8, 42a2f4, 42a324) + 124
    fed46318 __1cKCompiledIC2t5B6MpnKRelocation__v_ (42a2f0, fc4ffd24, fc4ffd4c, e802, 0, 6) + 38
    fed90c38 __1cHnmethodVcleanup_inline_caches6M_v_ (fa5f7f88, fa608940, 1, 0, fa400000, 6) + 1ac
    fede18b4 __1cONMethodSweeperFsweep6F_v_ (2cf38, 0, ffffffff, ff1cf1fc, ff1c66e8, fede1d44) + 1b0
    fede1e6c __1cUSafepointSynchronizeFbegin6F_v_ (2cf38, ff1ba138, 5000, 50dc, 5000, 525c) + 248
    feef1fd4 __1cIVMThreadEloop6M_v_ (4400, 4000, 4324, 4000, 42b0, 3800) + 3d4
    feef1ae4 __1cIVMThreadDrun6M_v_ (e2d20, 2, 40, 0, 40, 0) + 8c
    fee6575c _start   (e2d20, ff270200, 0, 0, 0, 0) + 134
    ff3758c0 lwpstart (0, 0, 0, 0, 0, 0)
    =============================================================================================
    Second pstack
    =============================================================================================
    ----------------- lwp# 2 / thread# 2 --------------------
    fed41180 __1cXvirtual_call_RelocationIparse_ic6FrpnICodeBlob_rpC5rppnHoopDesc_pi_nNRelocIterator__ (0, ff1b9664, ffffffff, fc4ffcb8, a6f2cc, fc4ffbd0) + 6a0
    fed46318 __1cKCompiledIC2t5B6MpnKRelocation__v_ (a6f2c8, fc4ffd24, fc4ffd4c, e802, 0, 6) + 38
    fed90c38 __1cHnmethodVcleanup_inline_caches6M_v_ (faded4c8, fadf2c80, 1, 0, fa400000, 6) + 1ac
    fede18b4 __1cONMethodSweeperFsweep6F_v_ (2cf38, 0, ffffffff, ff1cf1fc, ff1c66e8, fede1d44) + 1b0
    fede1e6c __1cUSafepointSynchronizeFbegin6F_v_ (2cf38, ff1ba138, 5000, 50dc, 5000, 525c) + 248
    feef1fd4 __1cIVMThreadEloop6M_v_ (4400, 4000, 4324, 4000, 42b0, 3800) + 3d4
    feef1ae4 __1cIVMThreadDrun6M_v_ (e2d20, 2, 40, 0, 40, 0) + 8c
    fee6575c _start   (e2d20, ff270200, 0, 0, 0, 0) + 134
    ff3758c0 lwpstart (0, 0, 0, 0, 0, 0)
    =============================================================================================
    Has anyone ever seen anything like this? I'm trying to figure out if this is caused by something we're doing, or something relating to our environment and jvm options. Any ideas?

    Thanks for the reply - I'm testing our app with the +UseConcMarkSweepGC now in our test environment to make sure it doesn't cause any problems there.  Unfortunately the only place we've had this problem is on the production server, so it's extra difficult debugging this. 
    We're using the following memory options:
    -ms512m -mx512m -XX:NewSize=128m -XX:PermSize=192m -XX:MaxNewSize=128m -XX:MaxPermSize=192m -XX:SurvivorRatio=8and the following debugging options, as we've also been seeing OutOfMemoryErrors ( see http://forum.java.sun.com/thread.jsp?forum=37&thread=522354&tstart=45&trange=15 )
    -verbosegc -XX:+PrintGCDetails -XX:+PrintGCTimeStamps -XX:+PrintHeapAtGCBTW, which c++filt version and options are you using? Our Solaris boxes only seem to have the GNU version installed. I was trying to run that on some of the other stack traces and wasn't getting anywhere, and didn't know if because it was GNU version wouldn't work on something compiled with the Sun compiler.
    Thanks!
    --Andy                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

  • Problem with threads and ProgressMonitor

    Dear Friends:
    I have a little problem with a thread and a ProgressMonitor. I have a long time process that runs in a thread (the thread is in an separate class). The thread has a ProgressMonitor that works fine and shows the tasks progress.
    But I need deactivate the main class(the main class is the user interface) until the thread ends.
    I use something like this:
    LongTask myTask=new LongTask();
    myTask.start();
    myTask.join();
    Now, the main class waits for the task to end, but the progress monitor don`t works fine: it shows only the dialog but not the progress bar.
    What's wrong?

    Is the dialog a modal dialog? This can block other UI updates.
    In general, you should make sure that it isn't modal, and that your workThread has a fairly low priority so that the UI can do its updating

Maybe you are looking for

  • Error while runing standard SRS program

    Hi all, I had written the interface for po_vendor_sites_all.The data is loaded perfectly into interface table AP_SUPPLIER_SITES_INT. Now while running standard interface program on SRS(Supplier Sites Open Interface Import) .it is giving following err

  • How to create an interface

    Sorry for the newbie question. I was provided a class, and they said that in order to use this class the interface can just construct a new SampleClass and method1() followed by method2(). I've looked over the documentation on interfaces, but I still

  • How do I reformat?

    I recently bought a used ibook. I just wanted to know how I can reformat my ibook so it is a clean slate. I have all the discs. I just need someone to teach me how to completely erase the previous owners' name on the comp and settings and so forth, a

  • Routing (chaining) failure

    Hi Folks! I'm seeing a Routing (chaining) failure every time the localhost tries to download CRL updates from the Internet. I checked the System Policy and it has an enabled rule from localhost to All Networks for CRL updates. This is the first entry

  • SelectOneRadio problem - Help!

    I am using selectOneRadio for the user to select a particular report they would like to run. When a radio button is selected though, certain fields may need to be disabled for that particular report, and other dropdowns need to be reset. I utilized a