Q 10 Issue with Night mode and Pnone on ring mode
I have one more issue now.
I put on the alarm mode at night which shows the clock in red.
Today I realised that the phone goes in to silent mode and does not ring.
I want it to be in PHONE ONLY mode to attend to emergencies.
Is there any way that can be done ??
I wish to seee the time at night and also receive the calls as it was possible in BB 9900.
Thanks and Regards
Solved!
Go to Solution.
In the clock app, swipe down from the top bezel to go into settings - the setting you want is there.
Similar Messages
-
Issues with Office 2010 and Acrobat Pro 8
Good Day All;
We are in the middle of upgrading from Windows XP to Windows 7 with Office 2010 and I was wondering if there are any issues with importing Office documents into Acrobat Pro 8. I have found out that there are a couple of issue with Office 201 and LifeCycle Designer.
Any comments would be helpful
Regards
ChompAcrobat 8 is not compatible with Microsoft Office 2010 and the PDFMaker plugins will not install. Only Acrobat X is compatible with Office 2010, and at this time only in 32-bit mode.
Acrobat 8 is also not officially compatible with Windows 7, again Acrobat X is the first version to carry approval for that OS. It will still install, but Adobe cannot guarantee it will operate perfectly in all cases, and doesn't provide install support for that combination. -
Issues with illustrator 10 and windows 8
any known issues with illustrator 10 and windows 8...version worked fine on windows xp....new computer with windows 8....now cannot seem to operate. Loads, and shows access but will NOT start up. help ! thanx ttp74
AI 10 is now 10 years or so old and was never tested on nor designed for Win 7 or Win 8. You should simply assume it's not compatible and will never run properly. feel free to spend your time with the compatibility modes and al lsorts of hacking with the security stuff and otehr settings, but to be honest, it will probably be a waste of time.
Mylenium -
HT3131 Are there any ventilation issues with running a macbook air in clamshell mode?
Are there any ventilation issues with running a macbook air in clamshell mode?
...that makes sense to me.
but, why do so many MBA users (on this forum and others) claim that ventilation occurs through the keyboard? Is this claim based on an old macbook design?
for example, here's a related discussion (although fairly old):
11-08-2010, 12:16 PM
#6 (permalink)
SP Forsythe
Notebook Evangelist
Join Date: Jul 2007
Location: California
Posts: 660
Rep Power: 14
Re: Is it safe to use MBP with screen lid closed? Leave charge on always?
Quote:
Originally Posted by tHE j0KER
Actually I you shouldn't close the lid while running on an external screen. The keyboard of the Macbook is an air intake for the fan. Close the lid, and it could overheat.
A common misconception of unknown origin. The intake and the exhaust for the cooling fan on the 13" MB and MBP are both located on the rear slot at the base of the hinge. In fact, you can actually see the divider that separates the intake flow from the output flow. If it were through the keyboard crevices, then an awful lot of overheats would result from people using impermeable keyboard covers, as well as Apple's warranty department would be flipping out over the Apple store carrying such covers. iSkin ProTouch FX Keyboard Cover for all MacBooks - Black Printed Keys on White - Apple Store (U.S.)
Does one think that Apple sells these only for use when the Notebook is off??? http://store.apple.com/us/product/TW...co=MTM3OTUwMDE Closing the lid, whilst operating the unit actually results in cooler operation due to reduction in power consumed by operating the display, which in supporting the on-board display generates heat far greater than simply powering the video port..
Does one think that Apple sells these for use only when the MacBook is off? http://store.apple.com/us/product/TW...co=MTM3OTUwMDEApples direction for use is specifically for when using with an external display.
Currently using:
Apple MacBook Air 13" mid 2011 1.8GHz Core i7 4GB 256 GB SSD Lion & Ubuntu Linux via Fusion
MacBook Air 11.6" late 2010 1.6 GHZ, 320M, 4GB 180 GB SSD Upgraded OWC), OS X Lion
11-08-2010, 02:34 PM
#7 (permalink)
ajreynol
Notebook Virtuoso
Join Date: Mar 2009
Location: Ann Arbor, MI
Posts: 2,542
Rep Power: 18
Re: Is it safe to use MBP with screen lid closed? Leave charge on always?
once again, I've tried a few of these keyboard covers. the Moshi keyboard cover is the ONLY one I can recommend. the others are too thick or change the keyboard experience too much.
17" Apple MacBook Pro | i7 2720m | 160GB SSD + 750GB | 16GB | HD 6750M 1GB
Dell 435MT | i7 920 | 10GB RAM | 7.64TB HDDs | HD 6970 | Win7+SL
HP Elitebook 2710p Tablet PC | 1.8GHz C2D | 4GB RAM | 160GB HDD | X3100
Apple iPhone 4 32GB | Apple iPad 64GB (Gen 3)
Stop random laptop wakeup | 5K500.B bench data | How to Disable PowerMiser
Disable Vaio beep when pressing volume or special keys
11-08-2010, 03:34 PM
#8 (permalink)
doh123
Without ME its just AWESO
Join Date: Feb 2009
Posts: 3,282
Rep Power: 22
Re: Is it safe to use MBP with screen lid closed? Leave charge on always?
1. Closing the cover will cause more heat. This is not because of covering the keyboard very much (though it does help some heat be retained). It's mainly because of the shape of the hinge and the fact when closed it covers up the back vent a lot more. For the best cooling, it is best to have the screen open. Just run it as a dual monitor, but make the external the Primary monitor, and if you don't want to use the built in, just turn its backlight off and don't use it.
2. The thing you plug into the wall is not a battery charger. The actual "charger" is built into the computer. It knows when to charge and when not to. If the little light on the power plug is amber, then its charging your battery. When its green, its just powering the laptop and NOT charging your battery at all.
Mac OS X Gamer/Porter
(We do exist!)
Wineskin 2.5 is available!. Turn Windows apps into Mac apps for free!
11-08-2010, 03:38 PM
#9 (permalink)
Wolfpup
Notebook Virtuoso
Join Date: Jun 2007
Posts: 3,871
Rep Power: 28
Re: Is it safe to use MBP with screen lid closed? Leave charge on always?
I'd leave the lid open, at least partially...yes it may be fine not doing that, but you are making heat dissipate worse, of course could even theoretically hurt the screen.
As for the battery...well there's really only two choices, have it plugged in or not. As others mentioned, you can't overcharge the battery. It can be damaged a bit from heat, but of course the number one thing that's going to damage it is discharging it...so it's a no brainer-use it plugged in whenever possible, and try to charge it whenever possible when it's not plugged in.
11-08-2010, 03:45 PM
#10 (permalink)
SP Forsythe
Notebook Evangelist
Join Date: Jul 2007
Location: California
Posts: 660
Rep Power: 14
Re: Is it safe to use MBP with screen lid closed? Leave charge on always?
Quote:
Originally Posted by doh123
1. Closing the cover will cause more heat. This is not because of covering the keyboard very much (though it does help some heat be retained). It's mainly because of the shape of the hinge and the fact when closed it covers up the back vent a lot more. For the best cooling, it is best to have the screen open. Just run it as a dual monitor, but make the external the Primary monitor, and if you don't want to use the built in, just turn its backlight off and don't use it.
Nope. Apple would disagree with you on that one. Any "closure", which is, when compared to the amount of CFM, is insignificant. In fact, the opening size remains the same. it is only deflected at a slight angle when the lid is closed. Tilt your MBP and see. As well, shutting down the display lowers the heat being generated, even in the lower case. As I said, if it were a problem, Apple would not be selling stands designed to operate your unit in the closed position as the original poster of this thread proposes to do.
Currently using:
Apple MacBook Air 13" mid 2011 1.8GHz Core i7 4GB 256 GB SSD Lion & Ubuntu Linux via Fusion
MacBook Air 11.6" late 2010 1.6 GHZ, 320M, 4GB 180 GB SSD Upgraded OWC), OS X Lion -
Issues with Exchange Account and Q10
Well, I hate to be writing this, but I'm hoping that there might be someone out there that can help get past some first day issues I am experiencing.
The background: I have a long history with legacy BlackBerry devices, and almost as much history with iOS devices. My most recent phone was an iPhone 4S, and I make extensive use of iCloud to keep my iMacs, iPhone, and iPad connected in real-time. The setup worked. It wasn't perfect, but it worked. However, because I used to have a BlackBerry device (most recent the 9930) and because I don't use the iPhone for more than e-mail, iMessage, and phone calls (generally speaking), I decided to give the newest BlackBerry device a shot. So I bought a Q10.
At this point I feel compelled to say that the hardware is everything I had hoped it to be. It's solid, has a good weight, and appears to be made very well. I have no complaints with the hardware, including the keyboard (a big selling factor for me), so I won't really get into the hardware as the issues I am experiencing all have to do with the OS. Let me also say that I am very familiar with the iCloud integration issues (missing Contact photos and disabled Calendar sync), so I'm not voicing a complaint over those issues in this thread.
I have connected my Exchange account. I used to have everything in Exchange before I moved my entire computing world over to Apple, and now I keep Exchange around for e-mail. Therefore, I have no contacts, no tasks, no notes, very limited calendar entries, and a massive amount of e-mail on the Exchange server. However, to test everything out, I have added a single contact record so I can see it show up on the phone and be able to test two-way sync between the Q10 and Exchange. And here is where the first issues crop up. It looks like Exchange connects and then disconnects at random. For example, if I open my Contacts on the phone, I see the one contact (called John Doe). Then, as the phone is sitting there with the screen on, the contact will disappear and I will see a "Start adding contact to your contact list" notice on the screen. Then, after a short period of time, the single contact will return. It is important to note that the entire time this is happening, the All Contacts option is selected in the list so that all available contacts are shown. Additionally, I have SIM card contacts turned off, but if I alter the selection in the view list (All Contacts, Favorites, etc.), the SIM contacts will re-appear when I return to the All Contacts view. At the same time, even though I have turned off SIM Contacts in the settings, the setting has reverted to show SIM Contacts. If I turn off the setting again, SIM Contacts still show up. Possibly related: I can't delete contacts on the SIM card, no matter how many times I try, and it now it seems that I can't get SIM Contacts to go away in the Contacts app.
Likewise, Exchange seems to connect and disconnect from Calendar. I go to the calendar and move day by day to June 15th. I see an entry that I know is from Exchange (I have no other connected calendars at this time), and it is in blue. I change the calendar color to green and the entry changes color, as expected. However, if I jump back to today and then scroll day by day to get to June 15th again, the calendar entry is missing. After a few seconds, the entry re-appears, but it is, once again, in blue. The setting has reverted itself, and it seems like Exchange is completely disconnecting and automatically reconnecting to the phone like I am setting it up again for the first time. Very odd. As I'm typing this, I just saw something odd. I swiped to wake up the phone, and the active frames screen was the visible screen. The calendar app is still running (since I left it running, minimized, when the phone went to sleep) and the date shown in the active card was Jan 1, not Jun 8. Why? The date (and time) on the phone is correct and is set automatically by the cellular system.
Nevertheless, looking at BlackBerry Hub, I see only two e-mails in my Inbox from Exchange, even though I have roughly a dozen in my Inbox. The rest are filed in sub-folders. And bam! Just like that... I get the "Add Accounts" screen while looking at the Hub. In other words, as I was typing this, I first saw two Exchange e-mails and then, out of nowhere, the e-mails disappear and I see the "Add Accounts" screen as if no account has been connected.
So... first question: Is anyone else experiencing this issue? This is very strange, and very frustrating. Second: could this be related to the large amount of e-mails I have stored on Exchange, some of which have large attachments? I selected "Forever" as the sync history length. I have my concerns, however, if this is related to loading historical e-mails onto the phone (in other words, the first sync with Exchange) because there is no reason that I can understand that the phone would blank out as if no account was connected at all. I can understand lag and stuttering while the history is syncing, but not a complete disconnect and reconnect. Considering all of the issues with the one and only contact record disappearing, the calendar entry for Jun 15th disappearing and then reappearing with the wrong calendar color, and e-mail in my Inbox incomplete (two of a dozen e-mails) and ultimately disappearing, I feel like this OS just has some real, significant issues.
Full disclosure: I do want iCloud to work and am a fan of Apple products, but the lack of full iCloud sync support is not a big enough issue for me to want to send back this phone and/or see it fail so miserably. I will happily move my info from iCloud into Exchange, Google, and/or set up a new Exchange account for personal use (Office 365) because I am not wedded to iCloud per se. But, I won't go through that trouble if I can't even get my first account to work properly. It should also be noted that I do have a basic Google account (non-paid) and I had previously attempted to connect to it. However, I was experiencing the exact same issues with contacts disappearing, e-mail disappearing, etc. So I deleted that account. Truth be told, I deleted the Exchange account as well, and then re-connected to Exchange only to test one account at a time. Unfortunately, even with Exchange only, I am seeing very strange and frustrating behavior as described above.
Help... please. I want this to work but the frustration I am feeling is growing worse by the hour.
Model: SQN100-2
OS Release: 10.1.0.2011
OS Version: 10.1.0.2038
Build ID: 525050
IanTo follow-up with this issue:
I ended up performing a security wipe on my device. The security wipe finished, and I was about to reconnect with Exchange when I decided to visit our host's web site to see if they had any articles covering the issues I was experiencing. While they didn't have anything specific, I did find a step-by-step guide to connecting a BB10 device to Exchange... and right there at the end, it said "Do NOT enable memo sync."
I contacted support, and the rep told me that OS 10 has an issue with memo sync and it can cause all sorts of unpredictable behavior. Now, whether or not this is accurate I can say this: So far, the device is not disconnecting and reconnecting like it was before. Problem is, is this a result of not enabling memo sync, or is this a result of the security wipe?
I may have overlooked it, but I don't recall reading anything about that anywhere else. I'm tempted to try re-enabling the memo sync to see if everything blows up again. At least that way I can see for myself if the memo sync is a real issue. Of course, perhaps it's an issue with SherWeb (our host) specifically. Hm...
Anyway, for those that were interested, and for those that may come along in the future with a similar situation, the strange behavior that I first reported is no longer happening. I just don't know if it was a result of a security wipe or a result of not enabling memo sync with Exchange.
Ian -
Since the Mountain Lion OS update today I've had issues with internet connection and e-mail, has anyone else?
That's what I would have thought, but even after saving the setting, as soon as I shut down my computer or log out of Mail, it automatically defaults back to 25. It's a bit frustrating.
Now I just need to figure out how to get rid of those horrible pop-up banners but still have my glass sound and number of emails in the red dot when I get an email...
These little tweaks are the only thing I HATE about upgrading my OS. -
I am having major issues with Logic 8 and want to reinstall.
I am having a lot of issues with Logic 8 and want to do a re-install. What is the procedure and what do I need to uninstall first. I need to be careful, because I don't want to affect my Logic 7.
Any suggestions?What problems?
The first thing to do is trash the preferences. As far as affecting Logic 7, once you install 8, 7 is "forgotten" about. I'm assuming your L8 is a real version, not a "borrowed from the interweb" one. -
My itunes account on windows xp shuts down for no reason. If even try to delete something from my library it shuts down. It wont recognize my iphone and there is an issue with network connectivity and I can't connect to the store. I have already reinstalled itunes and did a system restore on my computer, firewall has been checked, itunes is ok on firewall and virus scan done. Ideas??
Same problem. I can see the itunes store so not a problem with windows firewall. The account is active on my iphone so i know i am not locked out. I can connect the PC to my iphone so i know itunes is working ok. It is just logging into itunes on this pc which doesn't work. Only thing I can think of is that the email address I use for my apple id has been offline for a while and is working again now, I'm wondering whether this has been the case for others who are having this issue?
-
HT4527 Is there an issue with home sharing and windows 8?
Is there an issue with home sharing and windows 8? I've tried everything and cant get mine to work.
Here is the entire error listing after it states the installation encountered errors.
Exit Code: 7
-------------------------------------- Summary --------------------------------------
- 1 fatal error(s), 2 error(s), 13 warning(s)
WARNING: DW066: OS requirements not met for {0D96CFE6-376D-44B8-808A-16F3BEB73263}
WARNING: DW066: OS requirements not met for {601CB5BC-03F9-43CC-86F0-C75E65E6AF31}
WARNING: DW066: OS requirements not met for {56AE7FCC-81B2-4A63-A171-CD95C9295EF2}
WARNING: DW066: OS requirements not met for {4717AE70-5377-45C7-A9E9-4E400485F0BF}
WARNING: DW066: OS requirements not met for {8B59B329-26C1-48A4-A5AA-923F55B17B87}
WARNING: DW066: OS requirements not met for {948B7277-3D4C-4672-B1DB-24B3C83D704E}
WARNING: DW066: OS requirements not met for {25303D67-B573-460C-A0B6-B5CF2AE05045}
WARNING: DW066: OS requirements not met for {33E08F4F-42B7-42A9-89E4-443E02738DB0}
WARNING: DW066: OS requirements not met for {D5B1535A-FDFC-4B40-B2E2-21DA83D9CB57}
WARNING: DW066: OS requirements not met for {AD60EB24-4CEE-4CA0-A6AA-526EAF41F2DB}
WARNING: DW066: OS requirements not met for {F9FAC696-2E48-497D-B820-C9A65DA630DF}
WARNING: DW066: OS requirements not met for {7DE6CDC3-CFEE-4564-813D-3F59E5D71F10}
WARNING: DW066: OS requirements not met for {C92E440F-EE79-4A28-B1E1-EC82B6F2AF33}
ERROR: DW020: Found payload conflicts and errors:
ERROR: DW020: - Adobe Flash CS5.5 depends on Adobe Flash Player 10 ActiveX to be installed.
FATAL: DW020: Conflicts were found in the selected payloads. Halting installation. -
Issue with Information broadcasting and pre-cal server in SAP BI
Hi Experts,
I have issue with information Broadcasting and Pre-cal server. I have a worrkbook whcih runs from information broadcasting in pre-cal server. Workbook is desinged on single query and workbook contains visual basic code. workbook has a variable which is controlled by Control query in information broadcasting.
I have 20 employees every month I need to send workbook via e-mail from information broadcasting. The problem is sometimes all 20 employees will recieve e-mails and sometimes not. I identified there is something wrong in workbook or in pre-cal server.
because after workbook calculation in pre-cal server is not pushing to SOST so there is something wrong in workbook or in pre-cal server.
I closely observed pre-cal server front end log. There are few operations performing on workbook in pre-cal server
like Open workbook, Calculate workbook, Save woorkbook and close workbook. In success case pre-cal sever is performing all the operations but in failure case pre-cal server is missing Close workbook case.
Below log In pulled from pre-cal server
Can you please tell what could be the problem.
Successful job
3/11/2011 9:29:46 AM (3) -> RS_PREC_LAUNCH_EXCEL i nvoked in thread 3 and job 'BIBCAST4L4EIS7TOR5BWG0
2PCUG9ZPPP'. nvoked in thread 3 and job 'BIBCAST4L4EIS7TOR5BWG0
3/11/2011 9:29:46 AM (3) -> InitConnection in thre ad 3
3/11/2011 9:29:46 AM (3) -> Trying to open "C:\Pro gram Files\Common Files\SAP Shared\BW\BExAnalyzer.
xla" gram Files\Common Files\SAP Shared\BW\BExAnalyzer.
3/11/2011 9:30:18 AM (4) -> RS_PREC_GET_SERVER_STA TUS invoked.
3/11/2011 9:30:18 AM (4) -> RS_PREC_GET_SERVER_STA TUS finished
3/11/2011 9:30:35 AM (3) -> Using Version 7100.4.1 200.35 of BExAnalyzer.xla
3/11/2011 9:30:35 AM (3) -> PID of Excel process: "2504"
3/11/2011 9:30:35 AM (3) -> EndOfInitConnection in thread 3
3/11/2011 9:30:35 AM (3) -> RS_PREC_LAUNCH_EXCEL f inished
3/11/2011 9:30:36 AM (0) -> Calculation Request 91 1A35ED029D4D79DD7A000200000000 received for job 'B
IBCAST4L4EIS7TOR5BWG02PCUG9ZPPP'. 1A35ED029D4D79DD7A000200000000 received for job 'B
3/11/2011 9:30:52 AM (6) -> RS_PREC_GET_SERVER_STA TUS invoked.
3/11/2011 9:30:52 AM (6) -> RS_PREC_GET_SERVER_STA TUS finished
3/11/2011 9:31:22 AM (0) -> Opening workbook: C:\W INDOWS\TEMP\BW\Analyzer\Workbooks\SAPBEXPRECMML4NN
DVLYAPC2SYIC7F1AAIO_0.xls INDOWS\TEMP\BW\Analyzer\Workbooks\SAPBEXPRECMML4NN
3/11/2011 9:31:43 AM (0) -> Refresh BExAnalyzer.xl a!MenuRefreshPrecalc returned with 1.
3/11/2011 9:31:43 AM (0) -> Calculated workbook C: \WINDOWS\TEMP\BW\Analyzer\Workbooks
SAPBEXPRECMML
4NNDVLYAPC2SYIC7F1AAIO_0.xls saved. \WINDOWS\TEMP\BW\Analyzer\Workbooks
SAPBEXPRECMML
3/11/2011 9:31:43 AM (0) -> Calculated workbook C: \WINDOWS\TEMP\BW\Analyzer\Workbooks
SAPBEXPRECMML
4NNDVLYAPC2SYIC7F1AAIO_0.xls closed. \WINDOWS\TEMP\BW\Analyzer\Workbooks
SAPBEXPRECMML
3/11/2011 9:31:44 AM (0) -> Excel based operations finished.
Failure job
3/10/2011 10:22:58 AM (1) -> RS_PREC_LAUNCH_EXCEL invoked in thread 1 and job 'BIBCAST4L41566ZBZDN2N
TGJR0462ZFX'. invoked in thread 1 and job 'BIBCAST4L41566ZBZDN2N
3/10/2011 10:22:58 AM (1) -> InitConnection in thr ead 1
3/10/2011 10:22:58 AM (1) -> Trying to open "C:\Pr ogram Files\Common Files\SAP Shared\BW\BExAnalyzer
.xla" ogram Files\Common Files\SAP Shared\BW\BExAnalyzer
3/10/2011 10:23:20 AM (3) -> RS_PREC_GET_SERVER_ST ATUS invoked.
3/10/2011 10:23:20 AM (3) -> RS_PREC_GET_SERVER_ST ATUS finished
3/10/2011 10:23:44 AM (1) -> Using Version 7100.4. 1200.35 of BExAnalyzer.xla
3/10/2011 10:23:44 AM (1) -> PID of Excel process: "2544"
3/10/2011 10:23:44 AM (1) -> EndOfInitConnection i n thread 1
3/10/2011 10:23:44 AM (1) -> RS_PREC_LAUNCH_EXCEL finished
3/10/2011 10:23:44 AM (5) -> Calculation Request 9 11A35ED02654D789871000900000000 received for job '
BIBCAST4L41566ZBZDN2NTGJR0462ZFX'. 11A35ED02654D789871000900000000 received for job '
3/10/2011 10:24:27 AM (0) -> RS_PREC_GET_SERVER_ST ATUS invoked.
3/10/2011 10:24:27 AM (0) -> RS_PREC_GET_SERVER_ST ATUS finished
3/10/2011 10:24:31 AM (5) -> Opening workbook: C:\ WINDOWS\TEMP\BW\Analyzer\Workbooks\SAPBEXPRECQB2VE
A8O8D8FBHYCR4HVB5UI8_0.xls WINDOWS\TEMP\BW\Analyzer\Workbooks\SAPBEXPRECQB2VE
3/10/2011 10:24:52 AM (5) -> Refresh BExAnalyzer.x la!MenuRefreshPrecalc returned with 1.
3/10/2011 10:24:52 AM (5) -> Calculated workbook C :\WINDOWS\TEMP\BW\Analyzer\Workbooks
SAPBEXPRECQB
2VEA8O8D8FBHYCR4HVB5UI8_0.xls saved. :\WINDOWS\TEMP\BW\Analyzer\Workbooks
SAPBEXPRECQB
Thanks in advance
NarendraHi Ravikanth,
Thank you very much for the reply
I went into RSPRECADMIN and clicked on 'Display Current Queue'. There we have 3 sections
1) Queue Overview of Open Precalculations
I can see this section is always blank after running IB also
2) Queue Overview of Current Precalculations
In this section I can see an entry after running IB and duration is changing. but some time workbook in this section will never processed but the duration column is changing may be something is happening at this stage.
If the entry is not proccessed in this section and IB SM37 job will never end. I manually cancelled the job from SM50.
Don't why the workbook is taking long time and will never end even though I cancelled the SM37 IB job.
3) Queue Overview of Proccessed Error-Free Precalculations
All the error free workbooks which means all pre-cal server completed workbook calculation and sent to SOST.
I manually ran the workbook for all the 20 employees I can't find any pop-up message (earlier we have pop-up windows appearing because of VB code and when report returns no data and we fixed the pop-up issues)
Can you please help me further to trace the error.
Thank you
Narendra -
Compatibilityy issue with windows XP and windows 8.1 for adobe photoshop elements 4.0
Compatibility issue with windows XP and windows 8.1 for adobe photoshop elements 4.0?comcom
You are going to have to contact Adobe on this one. We are other users.
Sounds like it's not even an Apple question? Not sure.
But the Adobe program changed, nothing changed in iTunes, right? -
Has any one experienced issues with iCloud synchronisation and contacts over two or more devices? The primary machine is an iMac running Lion. Address Book was created from vcf file (backup of address book prior to moving to iCloud). iTouch replicates Contacts just fine and matches the Address Book on the iMac. The iPad 2 does not showing only 123 contacts where there should be 200. I have turned off iCloud on both devices thus erasing the iCloud content of both devices and staring from scratch with both devices with identical results. Even turned off iCloud on the iMac and erased the Address Book and rebuilt with the same results. Anyone have any ideas or suggestions? I am going nuts.....
To follow-up with this issue:
I ended up performing a security wipe on my device. The security wipe finished, and I was about to reconnect with Exchange when I decided to visit our host's web site to see if they had any articles covering the issues I was experiencing. While they didn't have anything specific, I did find a step-by-step guide to connecting a BB10 device to Exchange... and right there at the end, it said "Do NOT enable memo sync."
I contacted support, and the rep told me that OS 10 has an issue with memo sync and it can cause all sorts of unpredictable behavior. Now, whether or not this is accurate I can say this: So far, the device is not disconnecting and reconnecting like it was before. Problem is, is this a result of not enabling memo sync, or is this a result of the security wipe?
I may have overlooked it, but I don't recall reading anything about that anywhere else. I'm tempted to try re-enabling the memo sync to see if everything blows up again. At least that way I can see for myself if the memo sync is a real issue. Of course, perhaps it's an issue with SherWeb (our host) specifically. Hm...
Anyway, for those that were interested, and for those that may come along in the future with a similar situation, the strange behavior that I first reported is no longer happening. I just don't know if it was a result of a security wipe or a result of not enabling memo sync with Exchange.
Ian -
Continuing font encoding and tag issues with snow leopard and CS4oI
I am looking for help with a font handling issue with snow leopard and cs4 Indesign. Despite numerous calls and hours on the phone neither Apple nor Adobe has been helpful. I have had this issue open with Adobe since oct 5 but they remain totally unresponsive to date. I need to be able to use Type 1 fonts and do the following , export a pdf from Indesign with the following attributes: 1) xml tags for stories and objects. 2) have the fonts encoded as ansi and embedded.
Some additional information - exporting to ps is not an option as it destroys the xml tags. and doesn't guarantee that the fonts won't become CID or some other odd encoding.
As it stands now,
Leopard (10.5.8) and CS3 creates ansi encoded fonts with xml tags.
Leopard (10.5.8) and CS4 creates ansi encoded fonts with xml tags.
Snow leopard and CS3 creates ansi encoded fonts and xml tags
Snow leopard and CS4 creates custom subsetted fonts and some xml tags.
If any one has any advice on how to force specific font encodings from CS4 pdf exports so that i can preserve the tags and get the correct fonts I would be grateful.The font encoding is not a function of the OS version, but rather of how a font is internally encoded and the content you are representing with the font.
If you are seeing a difference between MacOS 10.5 and 10.6 with the same Adobe software, it probably has something to do with use of a system font that is somehow different from one version of the OS to another. InDesign does not use any of the OS' font handling software.
Assuming that the fonts are embedded, subset or not, what is your issue with whether a font is ANSI-encoded, custom-encoded, or CID-encoded? It should make no difference for purposes of workflow beyond InDesign for software that adheres to the PDF specification (including all versions of PDF from 1.3 and up to 1.7 plus ISO 32000-1 PDF and all versions of PDF/X and PDF/A).
Neither InDesign or any other Adobe application provides user choices for the encoding since it shouldn't make a difference. The encodings chosen by Adobe's core technology components are for a combination of optimization and to support proper text search, copy, etc.
- Dov -
Issue with setting ratings and labels
Greetings all. I am having an issue with setting ratings AND labels on image files at the same time. If the script sets the label first then the rating, the label doesn't show in Bridge. If the script sets the rating first then the label, the rating doesn't show in Bridge.
Is there a workaround for this? Here is my script function for doing this. file=filename minus extension. Rating is a number for the desired rating. lab is a number for the level of Label I wish to set. Everything works great except that I can't set both Rating and Label with the script as shown. In this instance, only the Ratings will show up in Bridge after running the script. If I move the x.label=Label line under the x.rating=Rating line, then the ratings only show for those images with no label (lab=0). Any image that gets a label receives no rating.
If you're going to test this, you may want to comment out the Collections part. That's the part within the "switch(Number(Rating))" block.
function setRating(file,Rating,lab) {
try{
cr=File(file+"CR2");
psd=File(file+"psd");
jpg=File(file+"jpg");
tif=File(file+"tif");
switch(lab) {
case 0: Label = ""; break;
case 1: Label = "Select"; break;
case 2: Label = "Second"; break;
case 3: Label = "Approved"; break;
if (cr.created) {
var c=new Thumbnail(cr);
c.label=Label;
c.rating=Rating;
if (psd.created) {
p=new Thumbnail(psd);
p.label=Label;
p.rating=Rating;
if (jpg.created) {
var j=new Thumbnail(jpg);
j.label=Label;
j.rating=Rating;
Rating=0;
else addFile=psd;
else addFile=cr;
switch(Number(Rating)){
case 0 : break; /* No Rating */
case 1 : if(!app.isCollectionMember(OneStar,new Thumbnail(addFile))) app.addCollectionMember(OneStar,new Thumbnail(addFile)); break;
case 2 : if(!app.isCollectionMember(TwoStars,new Thumbnail(addFile))) app.addCollectionMember(TwoStars,new Thumbnail(addFile)); break;
case 3 : if(!app.isCollectionMember(ThreeStars,new Thumbnail(addFile))) app.addCollectionMember(ThreeStars,new Thumbnail(addFile)); break;
case 4 : if(!app.isCollectionMember(FourStars,new Thumbnail(addFile))) app.addCollectionMember(FourStars,new Thumbnail(addFile)); break;
case 5 : if(!app.isCollectionMember(FiveStars,new Thumbnail(addFile))) app.addCollectionMember(FiveStars,new Thumbnail(addFile)); break;
default : break;
}catch(e){
alert(e);
return -1;Afew errors to start with, you were not creating a proper file as there wasn't a fullstop in the filename.
If a CR2 file didn't exist no other file was looked for, you were using "created" and should have been "exists"
This now labels and rates....
setRating("/C/Test Area/NEF/z",2,1);
function setRating(file,Rating,lab) {
try{
cr=File(file+".CR2");
psd=File(file+".psd");
jpg=File(file+".jpg");
tif=File(file+".tif");
switch(Number(lab)) {
case 0: Label = ""; break;
case 1: Label = "Select"; break;
case 2: Label = "Second"; break;
case 3: Label = "Approved"; break;
if (cr.exists) {
var c=new Thumbnail(cr);
c.label=Label;
c.rating=Rating;
if (psd.exists) {
p=new Thumbnail(psd);
p.label=Label;
p.rating=Rating;
if (jpg.exists) {
var j=new Thumbnail(jpg);
j.label=Label;
j.rating=Rating;
Rating=0;
switch(Number(Rating)){
case 0 : break;
case 1 : if(!app.isCollectionMember(OneStar,new Thumbnail(addFile))) app.addCollectionMember(OneStar,new Thumbnail(addFile)); break;
case 2 : if(!app.isCollectionMember(TwoStars,new Thumbnail(addFile))) app.addCollectionMember(TwoStars,new Thumbnail(addFile)); break;
case 3 : if(!app.isCollectionMember(ThreeStars,new Thumbnail(addFile))) app.addCollectionMember(ThreeStars,new Thumbnail(addFile)); break;
case 4 : if(!app.isCollectionMember(FourStars,new Thumbnail(addFile))) app.addCollectionMember(FourStars,new Thumbnail(addFile)); break;
case 5 : if(!app.isCollectionMember(FiveStars,new Thumbnail(addFile))) app.addCollectionMember(FiveStars,new Thumbnail(addFile)); break;
default : break;
}catch(e){
alert(e);
return -1; -
Issue with recursive join and filter records
I am having an issue with recursive join and filtering records for the following rules. The table, sample records, test script and rules are as below
drop table PC_COVKEY_PD;
create table PC_COVKEY_PD (
PC_COVKEY varchar(50),
COVERAGE_NUMBER varchar(3),
SEQUENCE_ALPHA varchar(3),
TRANSACTION_TYPE varchar(3),
COV_CHG_EFF_DATE date,
TIMESTAMP_ENTERED timestamp
delete from PC_COVKEY_PD;
commit;
Insert into PC_COVKEY_PD values ('10020335P8017MT0010012','001','001','02',to_date('01/FEB/2010','DD/MON/RRRR'),to_timestamp('02/JAN/2010 01:55:59.990216 AM','DD/MON/RRRR HH12:MI:SS.FF6 AM'));
Insert into PC_COVKEY_PD values ('10020335P8017MT0050012','005','001','02',to_date('01/FEB/2010','DD/MON/RRRR'),to_timestamp('02/JAN/2010 01:56:00.268099 AM','DD/MON/RRRR HH12:MI:SS.FF6 AM'));
Insert into PC_COVKEY_PD values ('10020335P8017MT0010032','001','003','03',to_date('14/JAN/2011','DD/MON/RRRR'),to_timestamp('14/JAN/2011 04:25:19.018217 PM','DD/MON/RRRR HH12:MI:SS.FF6 AM'));
Insert into PC_COVKEY_PD values ('10020335P8017MT0010042','001','004','03',to_date('21/JAN/2011','DD/MON/RRRR'),to_timestamp('21/JAN/2011 04:00:31.719444 PM','DD/MON/RRRR HH12:MI:SS.FF6 AM'));
Insert into PC_COVKEY_PD values ('10020335P8017MT0050022','005','002','03',to_date('21/JAN/2011','DD/MON/RRRR'),to_timestamp('21/JAN/2011 04:02:48.953594 PM','DD/MON/RRRR HH12:MI:SS.FF6 AM'));
commit;
--select * from PC_COVKEY_PD order by COV_CHG_EFF_DATE,TIMESTAMP_ENTERED;
PC_COVKEY COVERAGE_NUMBER SEQUENCE_ALPHA TRANSACTION_TYPE COV_CHG_EFF_DATE TIMESTAMP_ENTERED
10020335P8017MT0010012 001 001 02 01/FEB/2010 02/JAN/2010 01:55:59.990216 AM
10020335P8017MT0050012 005 001 02 01/FEB/2010 02/JAN/2010 01:56:00.268099 AM
10020335P8017MT0010032 001 003 03 14/JAN/2011 14/JAN/2011 04:25:19.018217 PM
10020335P8017MT0010042 001 004 03 21/JAN/2011 21/JAN/2011 04:00:31.719444 PM
10020335P8017MT0050022 005 002 03 21/JAN/2011 21/JAN/2011 04:02:48.953594 PM
*/Rule;
Every PC_COVKEY, query should recursively join and generate set of records depending on latest SEQUENCE_ALPHA for the coverage number at that point of time. For ex,
for 10020335P8017MT0010042 (4 row) should generate 2 records
1. 10020335P8017MT0010042001004 (PC_COVKEY || COVERAGE_NUMBER || latest SEQUENCE_ALPHA--004 for cover 001), SEQUENCE_ALPHA 001 for cover 001 is not the latest for 10020335P8017MT0010042.
2. 10020335P8017MT0010042005001 (coverage number 005, and latest sequence alpha-001 for cover 005).
SEQUENCE_ALPHA 002 for cover 005 is not the latest for 10020335P8017MT0010042 as it happened later stage.
for 10020335P8017MT0050022 (5 row) should generate 2 records as
1. 10020335P8017MT0050022001004 (PC_COVKEY || COVERAGE_NUMBER || latest SEQUENCE_ALPHA--004 for cover 001),
2. 10020335P8017MT0010042005002 (coverage number 005, and latest sequence alpha-002 for cover 005)
WITH SNAPSHOT_CVR_CTP as (
SELECT pcd1.PC_COVKEY,
pcd1.PC_COVKEY||pcd2.COVERAGE_NUMBER||pcd2.SEQUENCE_ALPHA as cov_key,
pcd2.COVERAGE_NUMBER,
pcd2.SEQUENCE_ALPHA,
pcd2.COVERAGE_NUMBER||pcd2.SEQUENCE_ALPHA as CVRSEQ,
max(pcd2.COVERAGE_NUMBER||pcd2.SEQUENCE_ALPHA) over (partition by pcd1.PC_COVKEY, pcd1.COVERAGE_NUMBER
order by pcd2.COV_CHG_EFF_DATE, pcd2.TIMESTAMP_ENTERED) as MaxSeq,
pcd2.COV_CHG_EFF_DATE,
pcd2.TIMESTAMP_ENTERED
FROM
PC_COVKEY_PD pcd1,
PC_COVKEY_PD pcd2
select * from SNAPSHOT_CVR_CTP SC
WHERE sc.PC_COVKEY = '10020335P8017MT0010042' -- 4 row
--AND COVERAGE_NUMBER||SC.MAXSEQ = COVERAGE_NUMBER||SEQUENCE_ALPHA
ORDER BY TIMESTAMP_ENTERED
PC_COVKEY COV_KEY COVERAGE_NUMBER SEQUENCE_ALPHA CVRSEQ MAXSEQ COV_CHG_EFF_DATE TIMESTAMP_ENTERED
10020335P8017MT0010042 10020335P8017MT0010042001001 001 001 001001 001001 01/FEB/2010 02/JAN/2010 01:55:59.990216 AM
10020335P8017MT0010042 10020335P8017MT0010042005001 005 001 005001 005001 01/FEB/2010 02/JAN/2010 01:56:00.268099 AM
10020335P8017MT0010042 10020335P8017MT0010042001003 001 003 001003 005001 14/JAN/2011 14/JAN/2011 04:25:19.018217 PM
10020335P8017MT0010042 10020335P8017MT0010042001004 001 004 001004 005001 21/JAN/2011 21/JAN/2011 04:00:31.719444 PM
10020335P8017MT0010042 10020335P8017MT0010042005002 005 002 005002 005002 21/JAN/2011 21/JAN/2011 04:02:48.953594 PM
I am trying to filter row using MAXSEQ but at the moment MAXSEQ values are not coming as expected. I expect following value for COV_KEY combination
COV_KEY MAXSEQ
10020335P8017MT0010042001001 001004
10020335P8017MT0010042005001 005001 -- match
10020335P8017MT0010042001003 001004
10020335P8017MT0010042001004 001004 -- match
10020335P8017MT0010042005002 005001Would appreciate if anyone can get MAxSEQ as expected.Something like..
with dist_cov_numbers as
select distinct coverage_number cov_number
from PC_COVKEY_PD
all_data as
select pcd.*,d.cov_number new_coverage_number,
max(decode(coverage_number,d.cov_number,sequence_alpha))
over( partition by d.cov_number
order by COV_CHG_EFF_DATE,TIMESTAMP_ENTERED
) max_seq
from PC_COVKEY_PD pcd,dist_cov_numbers d
select pc_covkey,pc_covkey||new_coverage_number||max_seq new_key,
pc_covkey||coverage_number||sequence_alpha actual_key
from all_data
order by COV_CHG_EFF_DATE, TIMESTAMP_ENTERED;
PC_COVKEY NEW_KEY ACTUAL_KEY
10020335P8017MT0010012 10020335P8017MT0010012001001 10020335P8017MT0010012001001
10020335P8017MT0010012 10020335P8017MT0010012005 10020335P8017MT0010012001001
10020335P8017MT0050012 10020335P8017MT0050012001001 10020335P8017MT0050012005001
10020335P8017MT0050012 10020335P8017MT0050012005001 10020335P8017MT0050012005001
10020335P8017MT0010032 10020335P8017MT0010032001003 10020335P8017MT0010032001003
10020335P8017MT0010032 10020335P8017MT0010032005001 10020335P8017MT0010032001003
10020335P8017MT0010042 10020335P8017MT0010042005001 10020335P8017MT0010042001004
10020335P8017MT0010042 10020335P8017MT0010042001004 10020335P8017MT0010042001004
10020335P8017MT0050022 10020335P8017MT0050022005002 10020335P8017MT0050022005002
10020335P8017MT0050022 10020335P8017MT0050022001004 10020335P8017MT0050022005002
10 rows selected Edited by: jeneesh on Nov 22, 2012 10:54 AM
Maybe you are looking for
-
Help! I need a Lightroom version that both supports a Canon 1DX and Windows XP. Hurry!
I currently use Lightroom 2.7 on my desktop and 2.6 on my laptop.I just got a Canon 1DX, which is supported by neither. I went to donwload a trial version of Windows 4, only to discover it won't work on an XP machine. Hopefully, somebody has an answe
-
How do you insert a "prior period" in Crystal Reports 2008
I am constructing a income statement that compares this current period versus the same period from last year. I used the parameter field and filter list for one time period. Is it possible to have a comparison time period on the same report. For ex
-
The IMAP server ... rejected the password for user ...
When I went to bed last night, Apple Mail (Lion, MacBook Pro) worked fine on my home IMAP server, as they have done for some time. This morning, I cannot log in and I now get the following error message: The IMAP server "..." rejected the password fo
-
VGA monitor to MDD or Quicksilver
I'm considering buying a used MDD (or Quicksilver) G4. Each has a video card that serves DVI or ADC. But, the monitor I now use with my G3 B&W is a VGA (using a DB 15 connector). How can I use the VGA monitor? What device/card/adapter will do this mo
-
Safari was accidentally deleted from hard drive. no trace of it anywhere. How do I get it back Do I have to reload Leopard or can I get from Apple Support page as an update