Q. about Mobile Athlon

Q:
Is it possible to put an AMD Athlon XP Mobil into a regular socket A ATX motherboard? and if not Why?
I'm going to build a new PC, which is going to stay in my livingroom......you know, a mp3, divx, DVD player thing ++. I want this pc to be as quiet as humanly possible.
I was thinking of building around the via C3 cpu. But after an rather disapointing review about the cpu, that is not an option any more.....for several years. ( too slow for divx ).
Watercooling could be a solution, but since this is a system that is going to be powered on always, it is kinda risky I feel. ( don't want risk any waterleekage in my computer...or on the floor )
If it is possible I can use the Mobile cpu, then I can take the noisy cpu fan and thoss it far far far humanly possible away.....and we would be almost fanless. But something in my head tell me that it is a hitch somewear
Bzzzzz

From Apple's FCS site:
Available Disk Space
• 4GB of disk space required to install all applications
• Additional 62GB required to install all optional templates, content, and tutorials (may be installed on separate disks):
- 9GB for DVD Studio Pro content
- 8GB for Motion templates and tutorial media
- 24GB for Soundtrack Pro audio content
- 12GB for LiveFonts and LiveType animated elements and templates
- 2GB for Apple Pro Training Final Cut Studio Tutorials media

Similar Messages

KT3Ultra and Mobile Athlon XP2400+ possible?

HELP!!!
I just purchased a mobile Athlon XP2400+ for use on my MSI KT3Ultra (via KT333)
and I would like to
A) Get it to work on my board
B) Overclock it
What type of settings should I use? I currently run an XP2100+ Polly stock. Can I leave the stock 1.73 (or 1.65 cant remember) voltage, and increase FSB to 166, ot what?
Am using Crucial PC3200 (512 MB), GF4 Ti 4200 128Meg........
HELP!!!

u prolly wont need this but look here:
https://forum-en.msi.com/index.php?threadid=38822&sid=
make a true sig, amps on psu, an mobile athlon probabley will work
as for overclocking "RESEARCH" its best to see what others have done, and what they have achieved, and how to go about doing it, look at the overclcoking guide at the top of the forum

Help... my KM4M-L displays Athlon Xp 2000+ as AMD Mobile Athlon 800

Hi guys,
I'm using the motherboard KM4M-L (MS-6734) with CPU Athlon XP 2000+ but it always displays my CPU as AMD Mobile Athlon 800 MHz even though I've already set the jumpers for cpu speed to 133. When I tested setting the cpu speed to 100 it showed my cpu as AMD Mobile Athlon 600 MHz so I assum that the multiplier has been set to 6 from the factory. But wait... it doesn't have the jumpers for setting multiplier! Or the motherboard sets multiplier automatically? What's wrong with my motherboard or cpu? (I'm sure my cpu is Athlon XP 2000+, I've checked by installed it to my friend's machine and that machine displayed the cpu correctly). Could anyone pls help?

I concur with Nick. I'm also running the KM4M-L with a 2500+ (pre-week 3/39 unlocked) and there's no way to set multi or FSB in the BIOS.
I've blown the 3rd and 5th L3 bridges on the chip which gives it a default multi of 13 instead of 11. Not much of an overclock, but 2.16Ghz (instead of 1.83Ghz) is about the best I'd expect from default vCore.
Also, just to point out, the Mobile chips (at least in the case of my 2400+) default to the 6x multi, even in my NF7-S 2.0 board. I believe due to the PowerNow technology, they are set to start out at a minimum of 6x multi and can throttle up to as high as 13.5 depending on temp and power settings. (ie. remaining battery life)

TS3212 itunes won't download because something about "mobile device not authorized?"

itunes won't download because something about "mobile device not authorized?"

Hi buckirich,
Thanks for using Apple Support Communities. It sounds like you may need to restart the Apple Mobile Device Service. This article has instructions for doing this:
How to restart the Apple Mobile Device Service (AMDS) on Windows
http://support.apple.com/kb/ts1567
If that doesn't resolve the issue, I would recommend trying a thorough uninstall and reinstall of iTunes as described here:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
Cheers,
- Ari

Few common questions about Mobile Forms

Hello, everyone!
I have a few questions about mobile forms:
Can a form be integrated with a portal, which is build NOT on Adobe CQ\AEM technology?
I've created a form and loaded it to the server repository via Form Manager. Now I can access it in my browser like this:
http://testlcserver:8080/lc/content/xfaforms/profiles/hrform.html?contentRoot=repository%3 A%2F%2F%2FApplications%2FTest%2F1.0&template=UberForm.xdp&dataRef=
And the question is: what is the right way to share forms to users on a production environment (without integration in a portal pages on so on, let it be just a link to a form which users have to fill in)? I mean, should it be the same link, or it is only for developers need and to share forms to users some other way must be used?

For integrating on custom portal, you would need to integrate with form submit proxy for handling of submission as mentioned @ http://helpx.adobe.com/livecycle/help/mobile-forms/mobile-forms-service-proxy.html.
As far as url of form is concerned, it’s really up you. You can choose to hide the request parameters as couple of other customers are doing. You can find more information about hiding form template and content root from request parameter @ http://blogs.adobe.com/foxes/hide-parameters-from-mobile-form-url/

Ques about mobile karaoke

I have 2 questions to ask about mobile karaoke system:
1. How to play the multiple channels of midi for combining into a monotone for the usage of karaoke?
2. Synchronizing lyrics with the playing tone is another problem that i faced. Other than storing the time stamps for each word within the song, any other solutions to deal with it?

I encounter problem while developing my mobile karaoke project. I had used "mmapi-1.0-fcs" to develop my project. When I used " mmapi-1.0-fcs " emulator , it can work well on it and can support the "com.sun.midi.lyrics " event. The problem is when I used the Wireless Tool Kit emulator version 2.1, it doesn't work and cannot support the " com.sun.midi.lyrics " event. I just want to enquiry why this problem encounter? May I know why " mmapi-1.0-fcs " emulator " support and Wireless tool Kit version 2,1 doesn't support? Anyone who can help me on this, kindly please inform me how to solve my problem on my project. Your cooperation are much appreciate. Thank you.

About mobile infracture

hi sdners, actually i am a basis consultant. i want to know some details about mobile infrastructure. plz answer my doubts.
1.does this MI available as a seperate software solution or if u want even a single solution of netweaver (like ep or mi or bi) u have to install complete netweaver 2004s?
2.what is the use of having MI?

Hi shabbir,
SAP MI is composed of
1. Backend System
The application backend system covers processes. It provides the data pool for the client view on the data object, example, R/3 PM holds logic and data needed
2. Middleware system WebAS
Technically embedded in SAP Web Application Server (SAP Web AS),SAP Web AS supports the development and operation of J2EE-based and ABAP-based Web applications, controls the communication with backend systems
such as business applications and databases, communicating with Web -based frontend clients and providing
a framework for presentation logic and business logic.
3. MI Client
Any device that is connected or not connected to the backend system through a stable wired connection can be mobile client for MI.The client device runs the MI framework,
Knowing what is MI, there two prespectives of working on it.
1.Backend side.
Since you are an ABAPer you can concentrate on BE by writing BAPIs, BAPI Wrappers, generation fo tables and such.
2. UI developmentFrom the UI developer's point you need to wite code JSPs and AWT(we generally dont use this) in NWDS. If you want to be at this side of it. Knowldege of JSPs will be helpful.
These links will help you:
What is SAP Mobile Infrastructure?
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/21eba3a7-0601-0010-b982-92f1fca3258a
MI Server and Back End Systems must be configured properly..
For server configuration details .. refer theese links..
http://help.sap.com/saphelp_nw04s/helpdata/en/43/5f24092a2b5f85e10000000a1553f6/frameset.htm
Refer these helps for Client Side application development.
What is SAP Mobile Infrastructure?
http://help.sap.com/saphelp_nw04s/helpdata/en/a8/64b54cf975904da6f0ef47298cf433/content.htm
--Regards
Divya

Mu sons 4(not new) wont connect when connected to pc, first time i tried it said something about mobile me not on?

My son's iph4 (not new) won't connect when attached to pc, first time i tried it said something about mobile me not being on?

http://support.apple.com/kb/TS1538

Mobile Athlon 64 3700+ Compatible with K8T Neo?

I've been thinking of installing a larger cpu in my mainboard, the current set-up is...
MSI K8T Neo with AMD Athlon 64 2800+
I know that the Athlon 64 3700+ is compatible but is the Mobile Athlon 64 3700+
As far as I can tell all the specs look ok, it's just the mobile bit that worries!
Any ideas?

To quote Richard: "Any S754 cpu will work on a S754 board".

MSI mega 180 and mobile athlon xp

Does anyone know if the mega 180 supports mobile athlon xp processors? If they do, that would be great.. a xp-m 2400+ is rated at only 35 watts, which would make it very silent.

if you do a search on this forum for "mobile athlon" there are several threads documenting the laborious process of getting the XP-M cpus to work in mega 180. i personally don't think its worthwhile, but if you can manage it i believe it is worth it.

Need help w/ K7T Turbo2 and mobile Athlon 2600+/266

Hi.
I just bought a new Mobile Athlon 2600+/266 and can't quite get it to work right in my trusty Turbo2. It shows up during post as "Unknow CPU 800MHz", which is a little disappointing. (it is stable at this speed, though) My previous chip in this same board was an Athlon 1200/266 (A1200AMS3C), so everything worked at 133/266 before.
I've updated the BIOS to the most recent, checked that J17 is clear, stripped the box down to cpu + hd + 1 stick ram, and still no dice. All of my CMOS voltage/peripheral settings are at default.
The voltage/frequency menu in the BIOS correctly detects the chipset at 133MHz. When I tried to manually bump the freq multiplier to 15x, I actually saw a decrease in reported processor down to "Unknow CPU 733MHz". When I knocked it down to 14x, it dropped proportionally (to 667, I think). This makes me think that the freq multipler is correct at default, and that it's something else that's going wrong. I don't know what, though.
Is the problem that the chip is Mobile? My last guess is to try to up the voltage, but I didn't want to melt anything before checking with some experts.
I'm not looking for overclocking, just to get it running the 2.133 GHz that it was advertised at.
Thanks much,
-Clint
System specs:
Mobile AMD 2600+/266
K7T Turbo2 (latest BIOS)
ANTEC 350W model PP-352X
2x Micron 256MB PC133 (48lc32m4a2)

Does that board have a BIOS setting for FSB, as well as having the J17 jumper? I know a couple people with those boards, but never played in the BIOS to see. It sounds like it is actually trying to use 66MHz X 14, 15 or whatever Multiplier you are setting. Those Mobile chips are not Multi-locked like the normal CPUs are, and may be next to impossible to get set up on these older boards.

Questions about Mobile User accounts

I'm having some trouble fully grasping Mobile User accounts and hoping someone could clarify whether they would be appropriate in my situation.
We have some non-"mobile" users that solely use one machine and we would like them to continue to use their local hard drives. Is a "Mobile" account the solution?
Second, if a user is already using an independent Mac that is not bound to any server..is it possible to bind it, create a mobile account, then sync local with network home folders such that all of the current data in their existing Home folder is added to the Network Home folder? or must the account be started from scratch?
Lastly, What if we did not want all that data synched to the Network Home because there is simply too much of it. Can we still enjoy the benefits of Network login while certain files are local (I assume this is what the synching prefs are all about?!?) Users use same machine for 99% of their work. only occasionally would it be nice to provide them access to their mail, etc from a different client
PowerMac G4 Mac OS X (10.4.4)

I'll take some broad swipes at this and let the smarter people come fill in the details.
We have a true 1:1 setup in our office and have moved to PHDs as a means of protecting against downtime. The thinking is that we will have a spare machine lying around with our base installation ready to go. If a user's machine fails we'll replace it with the spare machine, let it sync the user directory from the server, and we're back in business. It's no substitute for a real backup system, but it potentially avoids having to run a restore from your backups. It also reduces network traffic compared to plain networked homes, and still lets your users work if the server goes down, but provides the benefits of centralized management. John DeTroye wrote a nice article about this.
If you've already got data on your "client" Mac you will need to move it onto the server. PHDs will download data from the server to the client on the first sync, but will not upload a complete home directory from the client to an empty directory on the server. You'll find some posts in this forum discussing how people have gone about migrating data prior to that first sync.
WGM allows you to establish exclusions for stuff you don't want to sync.
One thing to watch out for in the scenario you describe is the so-called "rabbit effect." Assume Bob uses Mac1 as his primary machine. If one day he logs into Mac2 his home directory will be downloaded to Mac2. Once he returns to Mac1 he'll still be cluttering up Mac2 with his data. If he logs into Mac3 the next day and Tom and Sue are also periodically logging into different machines, you can see how you'll end up with a mess pretty quickly.
Hope this helps.

Documents about mobiles compatibility with J2ME

Hello!
I have to develop a J2ME application and before, I'd like to write a document about all compatibility aspects I must consider in order to make this application compatible with all (or at least the most of) the existing mobiles handsets (simple cell phones, smartphones, blackberries and so on...).
I'd like to write a document containing, for instance, for each brand of mobile, the available APIs, JSRs, fonctionnalities, etc.
Can someone, please, lead me to where to find such a document?
regards

If memory serves,
1) JSRs 37 and 118 MIDP correspond to HTTPConnection functionality
2) JSRs 37 and 118 MIDP correspond to RecordStore functionality
3) JSRs 118 MIDP 2 and 177 SATSA correspond to VeriSign Certificate Trust detection
4) JSRs 120 and 205 WMA correspond to sending/receiving SMS functionality
HTH
PS. Links to specifications of above JSRs (actually, links to all JSRs at all) are available at JCP, URL: [http://www.jcp.org/en/jsr/all|http://www.jcp.org/en/jsr/all]

No notification about Mobile Recovery

If I am paying for TEC through Asurion why was I not informed about the Mobile Recovery app? This seems like an excellent service, but I had to discover it was available to me by stumbling upon it while doing research for a paper.
Does anyone know more about this app? Any known issues with using it?
Seems like a good idea to activate it if you are already paying for access to it. The ability to remotely lock and wipe your phone is essential these days IMHO.
Thanks

Thank you for your inquiry and we are sorry you were not informed. You as a customer if you are enroll in TEC (Total Equipment Coverage) and have a compatible Smartphone, you should have received a text message to your device for the Mobile Recovery enrollment with details for obtaining the application. To download the Mobile Recovery Application, please access the following link and follow the prompts: https://www.mymobilerecovery.com/public/verizon/get_started.html

Updated itunes, error message about mobile popped up during installation, then after installation, tunes will not start. gives error that a dll file is missing.

I downloaded the new Itunes version. During installation, there was an error message that said no Mobile access. After installation, Itunes would not open. Gave an error message that a DLL file was not found. Removed itunes from computer and initiated new download. Same problem with new download. Still does not open. I'm stumped. I have over 30,000 files in itunes and use it every day HELP

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

Q. about Mobile Athlon

Similar Messages

Maybe you are looking for