Q about Serial Numbers...

I registered FCP and various other components using my Apple ID. Does anyone know if it is possible to retrieve the registration number from Apple, if it was entered there once? I'm trying to upgrade to 6.0.2 from 6.0.2 and the web site asks for the reg numer. I'm sure a couple hours rummaging around will turn up the original discs, but it's frustrating that Apple "knows" I entered the number once, I'm logging in to get the download, but it wants the number again...

Guys, software update will not suggest you download an update that requires a serial number. There are currently 9 updates to FCStudio 2, including2 "pro apps" updates. Once I found the serial number (see next) I ran software update to see if it would tell me anything - answer: nada. It did not even suggest the pro-apps updates required by FCS2 or any of the components.
My original post was more or less a complaint that Apple knows who I am and I've registered serial numbers, but I still have to produce the serial number to download an update (which presumably is useless without the original software installed already anyway).
The serial number problem was that I have two nearly identical "installing your software" bookelets with the serial number stickers on the face. I simply didn't notice, at first, that one of them says "Final cut studio upgrade from FCP" and the other says, "Final cut studio 2 UPG from FCS." Once I used the second one, everything worked.
All of this works fine with 10.4.11. There is no need to upgrade to Leopard for any of this, at least not on a G5.

Similar Messages

Question about Serial Numbers

I recently purchased a few WS-SVC-FWM-1 from a gold vendor and I am seeing that the external serials do not match the internal serials... is this normal or should i send these back?
thanks

Hi Peter,
Can you please explain it in a bit more detail, what internal and external serial numbers are you refering to. Can you show us an example?
Thanks,
Varun Rao
Security Team,
Cisco TAC

Tables about Serial Numbers

Hi everyone,
I would be very grateful if someone could tell me which are the tables (all of them) that are related to material serial number in SAP.
Thanks in advance and best regards.
Ben.

Hi,
Hope these tables will be useful
EQBS Serial Number Stock Segment
EQSE Serial Number Records
MASE Last Serial Number for Material
OBJK Plant Maintenance Object List
SER00 General Header Table for Serial Number Management
SER01 Document Header for Serial Numbers for Delivery
SER02 Document Header for Serial Nos for Maint.Contract (SD Order)
SER03 Document Header for Serial Numbers for Goods Movements
SER04 Document Header for Serial Numbers for Inspection Lot
SER05 Document Header for Serial Numbers for PP Order
SER06 Document Header for Serial Numbers for Handling Unit-Content
SER07 Document Header for Serial Numbers in Physical Inventory
SER08 Document Header for Purchase Order Item Serial Numbers
SERBL Plant Maintenance Object List
SERI Serial Numbers
Regards
Sunil Kumar

Question about serial numbers/authorization

Hi there. I am trying to install Photoshop Elements on my new computer. I installed it on one computer already, but I erased the operating system and sold this computer. Then I tried to install it on another computer, but unfortunately the operating system was too old to be compatible with Photoshop. Because it didn't work, I unfortunately just erased the program from this computer without uninstalling it. Now that I want to install Photoshop Elements on my new computer, it won't let me, as I've already installed it two times and need to uninstall it on one computer. But unfortunately, for the reasons I just gave, this is not possible. Can you please help? Thanks!!!

Hi MCinc,
Please refer the knowledge base article: http://helpx.adobe.com/x-productkb/policy-pricing/error-activation-limit-reached-starting. html.
Regards,
Romit Sinha

Tables for Serial Numbers

Hi,
Can i know the tables which maintain data for serial numbers?
Regards
Sasika

Dear,
Please refer this link,
[Tables for Serial Numbers|Re: Tables about Serial Numbers]
Regards,
R.Brahmankar

I have adobe elements 6 program and my disk got distorted. i have all my serial numbers still as i have all packaging. is there a way the program can be downloaded. my computer had to be wiped out and was trying to reinstall

hi. i have the adobe elemenets6/premiere elements 4 package and my disk has gotten destroyed from getting all scratched up. my laptop i had my program on had to be wiped out and everything has to be reloaded. is there a way the program can be downloaded from the internet? i have the packaging still where it shows my serial numbers.

iPods do not work with "accounts." They work with your iTunes library. You don't have to set up a new iTunes library for each iPod. One iTunes library can sync with as many iPods, iPhones, and iPads as your own, at the same time. iTunes connects to and treats each device separately.
However, if your iPod nano is set up for automatic syncing with an iTunes library that is NOT your current iTunes library, you cannot sync your current library to it without replacing its existing content. Do you have access to the previous iTunes library, the one the iPod currently synced to? If so, you should transfer your song files from that iTunes library to your current iTunes library. Then, sync our iPod to your current iTunes library. You can post back to get more info about the procedure.
If you don't have access to that previous iTunes library, the approach is to first offload the song files from the iPod to your computer's drive, then add the song files to your current iTunes library.
You cannot use iTunes to transfer song files from iPod to computer, except for songs purchased from the iTunes Store. However, there are third-party methods and utilities that can transfer from iPod to computer. If you do a Google search on something like "ipod transfer," you should get some links.
You can then sync your iPod to your "consolidated" iTunes library.

DTW General Entry (Goods Receipt) with Serial numbers

Hi all,
I want to import 540 items with serial numbers using the General Entry templates. Some items have as many as 200 serial numbers. Total number of serial numbers for 540 items are about 24,000.
In the Serial Numbers template, will I have to cover 24,000 rows? Is it possible to auto-create the serial numbers with DTW?
In which field should I put the serial numbers - Internal or System?
Thanks,
Ajay Audich

Hi Ajay Audich,
You may check this thread first:
Re: Upload inventory transfer trnsaction with DTW
Thanks,
Gordon

Import of bulk serial numbers with Goods Receipt

Hello
I need to create an Add-On that automates the creation of Goods Receipt PO documents with linked serial numbers. Using the DI API I manage to create the Goods Receipt and link about 1000 serial numbers to one document without any problems. When the item qty (and linked serial number qty) goes beyond 10,000 it crashes (probably runs out of memory).
I know an alternative would be possibly using the DI Server. Has anyone ever done this with such big volumes? Not sure if the DI Server would be able to handle say 100,000 serial numbers, at a time.
Any advice is appreciated.
Thanks,
Jéan

Thanks Gordon.
This is not good news. I am just concerned as the SDK help on DI Server specifically states:
"Business partners can use the DI Server for the following main scenarios:
==>> Heavy duty operations, such as batch"
I assume this is the same type of "heavy duty operation" as a data take-on would be? Or does it mean that B1's serial number management is limited to small quantities at a time.
Jéan

Handling unit with serial numbers in return delivery

There is a handling unit (HU),whose system status is PSTD(goods issue posted). The delivery is posted. The billing document are issued. Handling unit was packed with materials with equipments and serial numbers.
Now I am creating another sales document(I want to return the good) and return delivery. No handling unit is attached to return delivery. (Why not? Returning original sales document is created with reference to original sales document)
Now I attach the serial numbers to the return delivery. (the same serial numbers which are included(packed) in the above mentioned HU). The return delivery is successfully posted. The status of equipment/serial numbers is on stock.
The problem is that this serial number with equipment is still packed in the original HU.
How can unpack the equipment from HU? I think the problem is the status of HU which is PSTD(goods issue posted).
Or alternative: can I move the HU unit from original delivery and attach it to return delivery?
The changing of the status of HU is not posssible because the original delivery is posted and I do not want to change this original documents anymore too.

I am afraid you are right
- The return delivery was created without HU. ( i mean HU which was originally sold in original delivery. )
Do you think I should create HU for return delivery with the same/different ID? How can I transfer equipment from original delivery HU to return delivery and HU ?
The problem seem to be that the original delivery and HU is locked (sytem status= posted )after posting. If I cancel posting of return delivery then I can attach a new HU. But the equipment is still part of the original HU.
Can I move equipment/serial numbers from original to returned HU? Is that possible at all?
I am talking about phisical same HU, so I guess there should be not 2 different HUs in the SAP system created.
I am looking for the scenario to sell equipment in one HU and return it in the same HU with return delivery.
thank you for your effort and responses

Missing Serial Numbers for CS4 COmponents & Acrobat X Pro

Greetings!
I installed CS5.5 on my 32-bit system, which means I had to install the included "complimentary" CS4 copies of After Effects & Premiere Pro. As stated in one of the Adobe troubleshooting sections I read, the CS4 components require a separate CS4 serial number. As also stated in that same section, Acrobat and CS products have different serial numbers. Unfortunately, I was only given one serial number, and that one was for CS5.5. See image below for related screenshot collage.
The serial number has been intentionally rendered unreadable for obvious reasons, but it's sufficient to show that there's only one serial number associated with my products. I need serial numbers for the 32-bit CS4 components and for Acrobat X Pro. How do I get them? I tried chatting with an Adobe support agent a couple weeks ago, and he told me he couldn't help me. He said I needed to get the serial numbers from the company that provided me with the CS5.5 serial number (Identit-E, who evidently gets involved with providing serial numbers for validated student license purchases). They said they couldn't help me, and that I had to get with Adobe! So I'm being run around in circles with nobody taking responsibility! And when I tried to follow instructions and a link that I thought MIGHT give me some answers (on this page: http://kb2.adobe.com/cps/517/cpsid_51791.html)...
"In North America: If you're a student or educator, look in the Adobe Student Licensing website"
...I got a warning from my browser that it's an untrusted site:
I'm not into taking that kind of risk.
So I've done about all I can think to do, including contacting the actual reseller who sold me the software (no word from them yet). Nobody's claiming responsibility, and they're pointing at each other. That leaves me in the middle with no answers and only partially working, very expensive software!
If there are any ideas from folks on this forum, I'm all ears!
Thanks!
Scott

ScottSutherland can you please private message me with your contact information. So we can work on resolving your difficulties.

Keeps asking for serial numbers after I joined Creative Cloud for students

I changed the language in creative cloud to English but nothing has changed.
I'm still using trials and whenever I log in, it keeps asking me to type in serial numbers.
What's the problem?

Cloud forum http://forums.adobe.com/community/creative_cloud/?view=discussions
http://forums.adobe.com/community/download_install_setup/creative_cloud_faq
-has a link about why you are prompted to enter a serial number

Serial Numbers in WM Storage Units

Hi all:
My client needs to manage serial numbers in WM. I am planning to propose to use the storage unit as storage for serial numbers. This WM will not have HUM, no batch management. Plant will use valution type.
Can anyone tell me what are the pros and cons for storing serial numbers in Storage Units in a non HUM WM?
We are implanting WM in SAP ECC 6.0
Thanks in advance for any help.

Hi Juan
Are you talking about managing serial numbers with storage unit management? When we use serial number management every material within the storage unit number will have a serial number. For ex:- if a storage unit number has 10 pcs in it then system would generate 10 serial numbers. You will need a BADI 'LE_WM_INV_WM_IM' and add data serial number in the class to control serial number function in WM. Check OSS 559531 for more info.
Thanks
Anandha

How to Query serial numbers on VXI smip modules.

I'm trying to write a program in C# that will query the VXI SMIP Switch Modules for their serial numbers. Right now I am able to view all the serial numbers through the soft front panel provided with the drivers but I need to automate this process and extract the serial numbers for further processing so I need to access the modules directly and read the data.
My current Setup:
[Computer with PCI-MXI-2 Board] ------> [ Racal Chassis with "SM1000E double wide Carrier" that can hold 6 VXI SMIP switch module plugin cards]
I'm able to see all resources in NI MAX.
The VXI resource is shown in NI MAX as : VXI0::26::INSTR
The VXI SM1000E Carrier that holds the 6 plugin module has logical address 26
and there are 6 modules in there carrier that is 0 based, module 1 is 0, module 2, is 1, module 3, is 2 and so on...
To my understanding, Visual Studio can automatically create wrapper code using the "Driver Wrapper Wizard" included with the T&M ToolKit. And by doing this I was able to access some of the functions of the drivers associated with this module.
I'm trying to use the vtvmSmip_QuerySmip function, which will return the NonVol data for up to six plug-in cards at once according to the documentation in the driver header file. The definition of the SMiP NonVol structure can be found in the vtvmSmip.h file. But I'm still unsure how to use it.
Using Visual Studio 2003, the function is available but it requires some arguments.
Below is the wrapper code generated.
[code]
private void button1_Click(object sender, System.EventArgs e)
// This code creates and initializes an instance of the VXIplug&play wrapper class
// TODO: Insert your appropriate values for address, idQuery etc.
Agilent.TMFramework.InstrumentDriverInterop.VxipnpWrappers.VtvmSmip myVtvmSmip;
myVtvmSmip = new Agilent.TMFramework.InstrumentDriverInterop.VxipnpWrappers.VtvmSmip("GPIB0::7::INSTR", true, true);
// TODO: Add your code here. For example:
// myVtvmSmip.Reset();
[code end]
I was wondering if, I want to use myvtvmSmip.QuerySmip(); What should I pass in as the arguments? This fuction suppose to return all 6 modules information. not sure how...
Its definition is as follows:
void VtvmSmip.QuerySmip(int smipStruct)
"smipStruct points to the locaton where the data is to be sotred. The Structure is of type vtvmSmip_SMIP_TYPE. Look in vtSmipDefs.h for the definition of vtvmSmip_SMIP_TYPE. Note: The Plug&Play spec prohibits exporting data structures, so the structure is not exported."
s
I get and exception when I use this as:
myVtvmSmip.QuerySmip(1);
didnt work gave me exception..
Another fuction I coulduse was this one.
myVtvmSmip.ReadNonvol();
I guess this returns 1 module at a time.
Definition:
voidVtvmSmip.ReadNonvol(short smodNmbr, System.Text.StringBuilder nvData)
I suppose smodnmbr responds to each module, 0, 1, 2, 3, 4, and 5.
I hope this isnt too much information.. I just want to be able to read the serial numbers of of these switch modules so I can process them. If anyone can help, that would be great. Thanks.
Chan

Hi Matt,
Thanks for your replay. Right now im trying to query the VXI Tech SMP1200 double slot carrier that holds 6 SMP5004 modules. But I have other SMP switches as well after I figure this one out, I belive if I can do this one, they should be the same for the other switches.
SMP1200 Product Link:
http://www.vxitech.com/ProductDescription.aspx?PID=218
SMP5004 Product Link:
http://www.vxitech.com/ProductDescription.aspx?PID=242
I belive I have the drivers from the manufacturer. When I try to implement the code below, I get an exception error.
The logical address of the SMP1200 Carrier is 26. And it has a resource name of "VXI0::26::INSTR" as should in NIMAX.
The SMP1200 holds 6 switch modules and I think its zero based ( Module 1 is 0, Module 2 is 1, Module 3 is 2 etc..up to 5)
reading through the vtSmipDefs.h file included with the drivers, It says QuerySmip() returns information about 6 modules at once.
ReadNonvol() reads one module at a time I belive. Not sure how this works because using these functions, they dont return a value. I don't know If I have to somehow read it back.
[CODE]
private void button1_Click(object sender, System.EventArgs e)
// This code creates and initializes an instance of the VXIplug&play wrapper class
// TODO: Insert your appropriate values for address, idQuery etc.
Agilent.TMFramework.InstrumentDriverInterop.VxipnpWrappers.VtvmSmip myVtvmSmip;
myVtvmSmip = new Agilent.TMFramework.InstrumentDriverInterop.VxipnpWrappers.VtvmSmip("VXI0::26::INSTR", true, true);
// TODO: Add your code here. For example:
// myVtvmSmip.Reset();
myVtvmSmip.QuerySmip(1);
[CODE}
The code above is automatically generated using the built in Agilent T&M Toolkit driver wrapper wizard in the menu in Visual Studio 2003. using this code, the intellisense menu does appear to show all the class members functions from the driver.
When I run the program, I get an exception error.
Ill post the exact data as soon as im back at work.
I can also send you a link to the drivers and the help files that have some information about it.
Im kinda a newbie here with programming in C# and also VXI/MXI. This is just part of my whole application im writing. So far I've been able to query all the instruments(meters, scopes, etc) through the GPIB using IDN query so far. Just the VXI left and its killing me. Appreciate you help. Look forward to your reply.
Thanks Chan

Subsequent outbound delivery split with serial numbers

Hi,
I have a question about subsequent outbound delivery split with already assigned serial numbers.
Case:
First delivery is created and serial numbers are assigned. Now we have to do a subsequent delivery split for that delivery. In SAP standard, it's not possible to do a subsequent delivery split if serial numbers are already assigned.
Does anyone know how we can handle this?
Best Regards,
Florian

well, seems to be not possible at all.

Ix2-400d: ??? how to determine drive serial numbers (online)

Any chance to identify drive serial numbers ( drive 4 to 1 ) online from an ix4-300D cabinet ( 4x 1TB ) via GUI ???
Yes I can find out drive model and (sometimes) firmware level hovering over drive position on storage status.
But I have found no way to determine invidual serial number.
(BTW same is with unit SN)
( Would you do the same with a faulty PC to ask for the serial number of a faulty VGA card?)
Background: having an open service call with confirmed drive replacement necessary. NAS is still active 24x7 in a business production environment with remote access from business partners internationally.
Lenovo will only pre-ship replacement drive and complete RMA-procedure if I can give SN of faulty drive. Finding out would need to assign service time with the customer ( outside office hours) and extra 20 kms travel plus the risk ( as usual) that drive will not return into operating state after powering off (have seen that too many times).
ADD: Pls. correct RMA procedure, SN of unit should be enough and is registered with Lenovo for warranty purposes anyway.
Various PCs / Laptops ( sorry I still really love Dell and Fujitsu ;-))
Supporting Customers ix2s and ix4s -- Love Networking ( not only technically ).
I am not a Lenovo Employee.
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Solved!
Go to Solution.

I agree about the type/model/pn and we have requested that as well. I hope the add it on again. Let me know if you continue to have trouble with the replacement.

Q about Serial Numbers...

Similar Messages

Maybe you are looking for