Q: Extension Manager showed wrong language when it was launched.
If Extension Manager is launched from Create Suite products' menu, it will use the locale of the product. If Extension Manger is launched in standalone mode( launching it from start menu or by double clicking or command line ), it will use the locale of the operating system. If you do want to run it in another language, you can add "-locale lang=" parameters. For example, on windows, you can run the command below to show French.
"C:\Program Files\Adobe\Adobe Extension Manager CS\Adobe Extension Manager CS.exe" -locale lang="fr_FR".
If Extension Manager is launched from Create Suite products' menu, it will use the locale of the product. If Extension Manger is launched in standalone mode( launching it from start menu or by double clicking or command line ), it will use the locale of the operating system. If you do want to run it in another language, you can add "-locale lang=" parameters. For example, on windows, you can run the command below to show French.
"C:\Program Files\Adobe\Adobe Extension Manager CS\Adobe Extension Manager CS.exe" -locale lang="fr_FR".
Similar Messages
-
Extensions Manager in Wrong Language
CS4 Web Premium
Installed about a month ago, in English. Everything was running smoothly, and in English, except....
tried to use Extension Manager today, and it's in German.
I have searched everywhere, including Adobe support. I cannot find out how it happened or how to switch the language for Extension Manager to English. Any help appreciated.I filed an issue with Adobe. Their response was to reinstall Extensions Manager from CS4 in English, since I must have installed it in German. All of the programs except Extensions Manager are in English. As always, they failed to read everything and jumped to a conclusion to get it off of their desk.
Here is what Adobe Support had to say:
I would like to give you a source of information:
Extensions are packaged for specific versions.
The Exchange site is currently an English resource, and extensions
are packaged by default for installation into English versions.
If you have installed cs4 Adobe Extension manager and Cs4 web premium separately, <--I did not
then I would recommend you to please uninstall the cs4 Adobe extension manager and run the
cs4 web premium which are already there in your setup files. <--This might be worth trying
The moment you run the application click on next and then when you will get a screen where it will ask for components on the right hand side.
Please select custom install and check the extension manager and uncheck the rest and then proceed.
Once the installation gets complete,please restart Mac and try to check whether the extension manager is displaying in English.
Please note that all the Adobe applications depend upon the serial key in terms of language versions.
I hope that the serial key which you have is for the English version. <--Yes, mine is an English version. All other CS4 installations show up in English.
Here is something additional on the problem:
It only launches in German when it is opened directly. I opened it from within Dreamweaver CS4, and there it was in English.
Since I was opening Extensions Manager on its own, it could be a product of the extension I was trying to install. I have not migrated my old extensions from CS3, so there was just one extension to load. I can only assume that the default language of the extension was German.
So, opening Extensions Manager from within the CS4 program seems to make the language set by the program installation, in this case English, work correctly. The extension attempting to be installed could be the instigator. -
Adobe Extension Manager CS5 5.0 Update
There was an error downloading this update. Please quit and try again later.
Dreamweaver CS5 11.0.4 Updater
There was an error downloading this update. Please quit and try again later.
this happens continual when I try to update minor increments for my CS5 Master collection no matter what application update I try.
No help available to resolve this problem...
William Bell.thank you,
I downloaded updates and installed manually, had to mess around a bit.
Start the updater from the program first, then install from the download.
Also, moved plugins that are for Premier from common plugins directory,
to the Premier plugins directory. Stopped the error I got launching After Effects
that said to reinstall the plugins.
Cheers!
W. -
When I use my Adobe updater I get the following errors:
Adobe Extension Manager CS5 5.0 Update
There was an error downloading this update. Please quit and try again later. Error Code: U43M1D207
Adobe Pixel Bender Toolkit 2.5 Update
There was an error downloading this update. Please quit and try again later. Error Code: U43M1D207
Fireworks CS5 11.0.2 Update
There was an error downloading this update. Please quit and try again later. Error Code: U43M1D207
Adobe Illustrator CS5 15.0.2 Update
There was an error downloading this update. Please quit and try again later. Error Code: U43M1D207But the files it says to download do not exist there.
Photoshop says "Extend Script Toolkit 3.5.1 update" but I can't find that anywhere.
When I try the others it just opens the updater, says downloading, and then when it finishes downloading it fails the update. -
can not update photoshop keep getting this error
Adobe Bridge CS5 4.0.5 Update There was an error downloading this update. Please quit and try again later.
Adobe Extension Manager CS5 5.0 Update There was an error downloading this update. Please quit and try again later.
Photoshop 12.0.4 update for Photoshop CS5 There was an error downloading this update. Please quit and try again later.
Photoshop Camera Raw 6.7 Update There was an error downloading this update. Please quit and try again later.
contacted customer service they could not help me I have previously had Photoshop on two other computers I deactivated it from one computer to put on a new one put. Can not do the updates I need them for camera Raw.
Please HelpWhat operating system are you using?
You can try searching for, downloading the updates yourself and running the installers:
Product updates -
Trying to update Flash CS5 but get the following error messages.
Adobe Pixel Bender Toolkit 2.5 Update
There was an error downloading this update. Please quit and try again later. Error Code: U43M1D207
Adobe Extension Manager CS5 5.0 Update
There was an error downloading this update. Please quit and try again later. Error Code: U43M1D207Hi There,
Please try the below mentioned link.
Error downloading and installing Creative Cloud application
Thanks,
Atul Saini -
Extension Manager (CS4 & CS5) shows wrong language
What more can I say? I discovered this problem running the CS4 Master Suite but fumbled through the dialog box and got the install of PixelBender to work. Now that I'm back with CS5 I'm still having the same problem. No language problems anywhere else but in Extension Manager. I'm using a Mac Pro, Snow Leopard, and the CS5 Design Premium Suite. The incorrect language appears to be German, though I don't speak or write German, so I'm not certain. Screen shot below. Thanks!
Thanks adaceyphoto to report this issue and provide another workaround. So far we haven't reproduce this problem in our environment, in order to help us catch it and do further analysis, could you please help to reproduce it in your Mac again and send us the log messages?
First, you need to restore the deleted languages again, and don't forget Danish.
Here are the steps to generate log messages:
1. Go to the installation folder of your Extension Manager, right click "Adobe Extension Manager.app", and select "Show Package Contents".
2. In the new Finder windows, select "Contents" --> "MacOS". In the MacOS folder, create a file named "ExManLog.YES", please make sure the created file has extensions ".YES". (You can right click on that file and select GetInfo to check the Name&Extension).
3. Launch Extension Manager, try to reproduce the language problems.
4. Close Extension Manager, open folder "/Users/$YOURNAME/Library/Application Support/Adobe/Extension Manager CS5/", there should be some files with ".log" format. These are the log files generated by Extension Manager.
5. Delete the ExManLog.YES file which is created in step 2, otherwise it will slow down your Extension Manager to generate log files.
It seems not able to attach files here, so please send the packaged log files to my email address. You can find my email address from your private message box.
Thanks. -
Key Figures With Hide can be shown showing wrong values when displayed in a query
Hi Experts,
I have a qiery with two structures in the column(cell Definition) three key figures are displayed and the rest are all hide can be displayed. However whenever i display one of the hidden key figures along with one displayed key figures it initially shoes incorrect values. Once i add another key figure (which has status always show) the hidden jey figure value gets corrected. Is it a problem with the structure? Kindly assist.For example when i display the actuals(always show) and actuals rate(hide can be shown) the values for actuals rate are wrong , however when i add the plan rate(always ahow) the values for actual rate gets corrected. Screenshots for structures below.Hi Sayanto,
For this I would recommend you to check the Key figure definition in all 3 situations.
1. original display
2. display of hidden KF
3. Display of existing KF
I suspect that cell references may have some effect on the calculation as you are adding the hidden KF in analyzer directly. You can prove this only by checking Key figure definition.
Please let me know if you are facing any issue in getting the Key figure definition itself.
Also, as Cornelia suggested check if you have any constant selection applied to any of your KFs.
Hope this helps.
-Swati. -
I've chosen Galician as my preferred language in iOS8. Since the iPhone is not translated to Galician, only the apps which are translated into Galician show up in that language, but the UI shows in Spanish (the second preferred language). Or should it be like that, because some apps (Twitter, Telegram, even the App Store) which have an Spanish translation show up in English. The App Store is even buggier because its fine on my iPad and it used to be OK on my iPhone with these settings, but suddenly it switched to English only in the iPhone. No matter how many times I force quit or reboot the iPhone, wrong language is displayed in some apps.
I think correct behavior is for apps to use the 2nd language on the list, if they do not have the first but do have the 2nd. I don't know why some app would do otherwise.
-
Q: Extension Manager is extremely slow when I try to remove or update my extension.
If "shared" attribute is "true" for files in an extension, Extension Manager has to do many checks when removing or updating this extension. It is time consuming. If the number of shared files is large, the time needed is extremely long ( might be more than 20 minutes ). Extension Manager CS6 did some optimization for this issue. But for Extension Manager CS5.5 or earlier, this issue still exists. We suggest extension developers do not use "shared" attribute for files if it is not necessary.
My computer will not update the iPod (60GB 5g). I tried both restore and update, it gives the same error 'an Unknown Error Occured (##)'. The ## will be different depending on if I'm trying Update or Restore, but one of the numbers I see is 1417.
The odd thing is I just sent my iPod in for service for what I thought was a hardware problem. Well, they sent it back to me with a note saying that it was Restored with the newest firmware. However, it still has the old version (1.1.2) on it, which leads me to believe that Apple couldn't get it to update either, but they sent it back to me anyways. I really disappointed with the company about this. I was really enjoying my iPod till it started having problems. I wish I could still talk good about either the product or Apple's service, but you're trying to make me dislike both. -
W8 RSAT Server Manager showing wrong capacity!?
Hello!
I connect from my W8 workstation to Hyper-V Server 2012 remotely and apparently Server Manager shows the wrong capacity in Gibibyte (by factor 10), but the right one in Byte!?
Is this a bug? Any suggestions?
L.Using Windows 8.1 to connect to a Windows 2012 R2 server, this issue doesn't appear anymore!
I should close this thread as "answered", but since there has never been any answer, e. g. by those who fixed this bug, I leave it open, hoping that anybody responsible reads it and in future we'll get proper answers! Like this hypothetical answer:
"Hi! We checked the source code and indeed there was a bug. It will be addressed by one of the next Windows Updates."
I think this hypothetical answer, including checking the source, would have cost a quarter developer-hour the maximum!
L. -
SPA 30x and 50x - show miss state when call was pickup
Hello
do you know, how to show on display miss state (softkey miss) when call was pickup in pickup group.
My IP phone is SPA 303 and 502, and 922 but SPA 922 is showing miss state well.
Server is Asteriks.
MarekCall completed elsewhere has not been missed, so SPA922 is on the wrong side ...
If the line is declared as shared AND call is CANCELed with
Reason: SIP;cause=200;text="Call completed elsewhere"
then no missed call is logged.
I'm not sure if you can configure Asterisk not to use this Reason in such particular case. If I remember correctly, there is and option of Dial() Application for it ...
Of course, unless you have User->Supplementary Services->Log Missed Calls for extension in question set to "Yes" no missed calls are logged at all.
Rate useful advices and/or mark answer as "correct". It will help others to found solutions. -
HAVE CHOSEN WRONG LANGUAGE WHEN STARTING UP IPOD 1ST TIME - HELP!!!???
I bought my son an Ipod Nano for his b/day. When setting it up after charging the battery (which apparently shd have taken "up to 3 hours" but was still saying "do not disconnect" some 8+ hours later!!!!) we accidentally selected what looks like Japanese or Chinese as the language instead of English - so we can't use it as we have no idea what's on the menu. Can anyone please tell us how to put this right???
To change the langauge, see this -> http://docs.info.apple.com/article.html?artnum=60956
For "Do Not Disconnect", connect the iPod and select it in iTunes.
Select the Summary tab.
Untick *Enable disk use*.
When set to autosync your music, it will sync and eject.If you have *Manually manage music* ticked, you will have to eject it yourself. -
Library shows wrong ports when using external MIDI
Whenever I start a new project and choose an external midi track the library displays the wrong ports. I have an Axiom 25, Motif XS6, and a Kurzweil through an Ultralite. The Axiom and Ultralite show correctly but the MOTIF (which has 3 ports) are all under the Axiom Port 1 listing. Any ideas on how to reset the library so it displays the correct ports.
I found the answer: The Axiom was listed in the default evnironment. when clicking on one of the wayward axioms that appeared in the library it actually produced the right port in the midi track. Then looking at the environment I found that it had produced another axiom with the yamaha port. By clicking on all four axioms in the library I was able to go to the environment and change the name to the proper Yamaha port. They then appeared in the library correctly.
The secret was setting up the environment correctly. -
Source of supply in SC shows wrong contracts when changing cocode
Hi experts,
Some details:
We are on an SRM 5.0 implementation, in classic scenario.
We have a problem when using source of supply in a shopping cart.
When we select a certain product and let the system suggest a source of supply, it gives us a list of contracts. However, when we change the company code, we would expect that these same contracts would not be visible anymore (as the R/3 contract has a company code). Even after refreshing, the system keeps giving wrong contracts.
Any suggestions?
Best Regards,
TomHi. Are these backend contracts and do your contracts have plants on?
I have a feeling that SRM only uses Plant, Unit of Measure and Material group to calculate if a backend contract is valid.
If your contracts have no plants that might explain it.
BADI BBP_SOS_BADI should allow you to restrict on custom criterea though.
Regards,
Dave.
Maybe you are looking for
-
(Acrobat XI) Using Javascript to scan PDF text
I am scanning text in a PDF and reading it into memory using doc::getPageNthWord(). Reading the text from the file using the mark 1 mod 0 eyeball looks like this: References Greenpeace. 2012. Safeway charts new course for sustainable tuna. www.gre
-
Thumbnails Blank When Importing Greyscale TIFFs
If I select File -> Import -> Images, and then select a directory of TIFF files that do not contain color information the thumbnails only show the image orientation, but are otherwise greyed out. Color TIFFs display normally. These are scanned in Bla
-
Would an ipad with a wireless keyboard be good for high school?
I want an ipad because its small and would be nice for travelling and playing games on. I need something for taking notes and writing out reports. Also for research for projects. I also like editing videos and I like garage band. would the ipad be go
-
Hi All, I am working on MDSD. While polling my MI client shows a message: u201Cno Tour for deviceu201D .I have already assigned my device to a driver and a vehicle with necessary details in connector cockpit. I have following queries for the same: 1.
-
How to print out the exception caught in the servlet controller to JSP?
May I know how to print the Exception caught and the stacktrace thing? What i try to do this in the databaseErrata.jsp code was not given me any answer. Instead, causing a number of errors. Below are my servlet controller code and databaseErrata.jsp