Q: I don't understand how to use the teeth whitening tool in PSE 9.

I've been going through the tutorials and following along pretty good but i got to the Perfect Portrait guided edit and didnt' get how to use the Teeth Whitening tool...it seems to select the teeth but then I'm lost....what am I supposed to do at that point after the marching ants are marching around the teeth?

I’m not sure what’s going on, but obviously something is not happening.
You could also try the dodge tool (keep pressing the letter O on your keyboard) until you see the blue dodge tool. No selection necessary.
Enlarge your image to about 200% and use the square bracket keys to increase or decrease the cursor size to fit the area to be whitened. Set exposure in the options bar to about 50%. Gently brush over the teeth area until you get them as you like.

Similar Messages

I don't understand how to use the volume control on the new iphone headphones

I just bought the new style earphones for my iphone and it has a new volume control -- how does it work? On the old one you just pushed up or down for volume control but now it just increases volume for the time you hold it down? Does anyone know how to use this properly?

I have had good success with the System Font Panel. Now all of a sudden, I only get part of it. Any suggestions on how to restore the entire panel? There are no change size options in the corners like in some dialog boxes. I was going to paste what I have here, but for some reason, paste is not available.

I don't understand how to use the System Font Panel with iMovie.

I need an explanation of how the System Font Panel works. I guess there's a way to get some of those fonts to the iMovie Font Panel, but I can't see how.
Thank you.

I have had good success with the System Font Panel. Now all of a sudden, I only get part of it. Any suggestions on how to restore the entire panel? There are no change size options in the corners like in some dialog boxes. I was going to paste what I have here, but for some reason, paste is not available.

I don't understand how to use the creative cloud, does the cloud app need to be installed?

trying to download creative cloud nothing downloads when trying photoshop getting an error and say retry

Yes, you need to install the Creative Cloud app first. It acts as your central hub for installation, sync and licensing.
Mylenium

Hi fellow apple guys, i have this problem. Hope you can help me. I don't know how to use the function keys (F1 to F12) on my macbook air. Pls help

Hi fellow apple guys, i have this problem. Hope you can help me. I don't know how to use the function keys (F1 to F12) on my macbook air. Pls help

Out of the box, to use the function keys as function keys, hold down the fn key when you press the key. Otherwise, you get the picture function on the key. You can reverse this behavior in the Keyboard system prefs.

Gantt chart: Don't know how to use the tooltipkeys and toolkeylabel

I have a problem. Don't know how to use the tooltipkeys and toolkeylabel. I used jquery to select the gantt bars and on mouse over i was getting the task id "tid" then passing it to adf bean with serverlistener and showing a popup that is adf component with javascript. For positioning of the popup I used a button that has width and height 0 and has position absolute and gets the coordinates of the mouse.
"div[et]" is a jquery selector that selects all the elements that have attribute et. I noticed that all the bars have that attribute as a few other attributes as well "part"...
<?xml version='1.0' encoding='UTF-8'?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<f:view xmlns:f="http://java.sun.com/jsf/core" xmlns:af="http://xmlns.oracle.com/adf/faces/rich"
        xmlns:dvt="http://xmlns.oracle.com/dss/adf/faces">
    <af:document title="untitled1.jsf" id="d1">
        <af:resource type="javascript" source="https://ajax.googleapis.com/ajax/libs/jquery/1.7.0/jquery.min.js"/>
        <af:resource type="javascript" source="resources/js/home.js"/>
        <af:messages id="m1"/>
        <af:form id="f1">
           <af:commandButton text="commandButton 1" id="cb1" inlineStyle="visibility:hidden; width:0; height:0" />
            <af:popup id="noteWindow" contentDelivery="lazyUncached" binding="#{homeBean.popup}">
                <af:noteWindow id="popupWindow">
                    <af:panelFormLayout id="pfl2">
                        <af:panelLabelAndMessage label="Task id" id="plam5">
                            <af:outputText value="#{homeBean.taskId1}" id="ot64"/>
                        </af:panelLabelAndMessage>
                        <af:panelLabelAndMessage label="Start Location Name" id="plam6">
                            <af:outputText value="#{homeBean.startLocation}" id="ot7"/>
                        </af:panelLabelAndMessage>
                        <af:panelLabelAndMessage label="Stop Location Name" id="plam7">
                            <af:outputText value="#{homeBean.stopLocation}" id="ot8"/>
                        </af:panelLabelAndMessage>
                        <af:panelLabelAndMessage label="tasktype" id="pla2m7">
                            <af:outputText value="#{homeBean.taskType}" id="ot9"/>
                        </af:panelLabelAndMessage>
                    </af:panelFormLayout>
                </af:noteWindow>
            </af:popup>
            <af:serverListener type="jsServerListener" method="#{homeBean.serverEventHandler}"/>
            <dvt:schedulingGantt id="gantt1" value="#{bindings.PersonView1.schedulingGanttModel}" var="row"
                                 startTime="2011-07-04 00:00:00" endTime="2011-07-04 23:00:00" summary="gsg"
                                 showMenuBar="false" showToolbar="false" iconPlacement="left"
                                 showTasksAsDailyBar="false">
                <f:facet name="major">
                    <dvt:timeAxis scale="days" id="ta1"/>
                </f:facet>
                <f:facet name="minor">
                    <dvt:timeAxis scale="hours" id="ta2"/>
                </f:facet>
                <f:facet name="nodeStamp">
                    <af:column sortProperty="#{bindings.PersonView1.hints.PersonId.name}" sortable="false"
                               headerText="#{bindings.PersonView1.hints.PersonId.label}" id="c1">
                        <af:outputText value="#{row.PersonId}" id="ot1">
                            <af:convertNumber groupingUsed="false"
                                              pattern="#{bindings.PersonView1.hints.PersonId.format}"/>
                        </af:outputText>
                    </af:column>
                </f:facet>
            </dvt:schedulingGantt>
        </af:form>
    </af:document>
</f:view>javascript:
$(document).ready(bindEvents());
function bindEvents() {
    $("div[et]").live('mouseover', function (e) {
         $('#cb1').css("position", 'absolute');
         $('#cb1').css("top", e.pageY-4);
         $('#cb1').css("left", e.pageX);
        var popup = AdfPage.PAGE.findComponentByAbsoluteId("noteWindow");
        var element = AdfPage.PAGE.findComponent("f1");
        var taskIdToPass = null;
        if ($(this).attr("tid") !=undefined) {
             taskIdToPass = $(this).attr('tid').toString();
        } else {
            taskIdToPass = $(this).parent().attr('tid').toString();
        var param = {            taskId : taskIdToPass        };
        AdfCustomEvent.queue(element, "jsServerListener", param, true);
        if (!popup.isPopupVisible()) {
            var hints = {};
            hints[AdfRichPopup.HINT_LAUNCH_ID] = "cb1";
            hints[AdfRichPopup.HINT_ALIGN_ID] = "cb1";
            hints[AdfRichPopup.HINT_ALIGN] = AdfRichPopup.ALIGN_AFTER_START;
            popup.show(hints);
    }).live("mouseout", function () {
        var popup = AdfPage.PAGE.findComponentByAbsoluteId("noteWindow");
        popup.hide();
};My bean that is session bean:
package view;
import oracle.adf.model.BindingContext;
import oracle.adf.model.binding.DCDataControl;
import oracle.adf.view.rich.component.rich.RichPopup;
import oracle.adf.view.rich.render.ClientEvent;
import oracle.jbo.ApplicationModule;
import oracle.jbo.Key;
import oracle.jbo.Row;
import oracle.jbo.RowSetIterator;
import oracle.jbo.ViewObject;
public class HomeBean {
    private RichPopup popup;
    private String taskId1;
    private String startLocation;
    private String stopLocation;
    private long taskId;
    private String taskType;
    public HomeBean() {
        super();
    public void serverEventHandler(ClientEvent clientEvent) {
        String taskIdString = clientEvent.getParameters().get("taskId").toString();
        this.taskId = Long.parseLong(taskIdString);
        DCDataControl dc1 = BindingContext.getCurrent().findDataControl("AppModuleDataControl");
        ApplicationModule am = dc1.getApplicationModule();
        ViewObject vo = am.findViewObject("PdTrfDayView1");
        RowSetIterator rowSetIterator = vo.createRowSetIterator(null);
        Row[] rows = rowSetIterator.findByKey(new Key(new Object[] {taskId}), 1);
        Row row = rows[0];
       this.taskId1 = row.getAttribute("PdTrfDayId").toString();
       this.startLocation = row.getAttribute("StartLocation").toString();
       this.stopLocation = row.getAttribute("StopLocation").toString();
       this.taskType = row.getAttribute ("PdTrfTypeId").toString();
        RichPopup.PopupHints ph = new RichPopup.PopupHints();
        vo.closeRowSetIterator();
    public long getTaskId() {
        return taskId;
    public void setPopup(RichPopup popup) {
        this.popup = popup;
    public RichPopup getPopup() {
        return popup;
    public String getTaskId1() {
        return taskId1;
    public String getStartLocation() {
        return startLocation;
    public String getStopLocation() {
        return stopLocation;
    public String getTaskType() {
        return taskType;
}I am wondering If i can use setCurrentRow on the iterator that i create and use it for displaying on the popup instead of binding startLocation and stopLocation to the bean and if there is any benefit of that at all...
Edited by: 897833 on Nov 24, 2011 11:37 AM

Hi,
To use tooltipkeys and tooltiplabel in gantt, you can add following code in managed bean
public String[] getTooltipKeys()
return new String[]{"columnA", "columnB", "StartDate", "EndDate"};
public String[] getTooltipLabels()
return new String[]{"A", "B", "Start Date", "End Date"};
where , the string array in the ToolTipKeys represents the columns, of the table you have in the gantt component , and the string array in TooltipLabels displays the label you want to display for the table columns.
In the jsff, you could call the bean methods as follows:
tooltipKeys="#{GanttBean.tooltipKeys}"
tooltipKeyLabels="#{GanttBean.tooltipLabels}"

I don't know how to use the canlendars function and the notes are kind of messy code,anyone help me

i don't know how to use the canlendars function and the notes are kind of messy code,anyone help me

Step by step:
1. On your main vi Front Panel, create your boolean indicator.
2. On the block diagram, right click the new boolean indicator and select Create - Reference.
3. On sub-vi front panel, create boolean indicator (or use one that is already created).
4. On sub-vi front panel, create a reference (Controls Palette - Refnum - Control Refnum).
5. Right click on the newly created Refnum and select Select Vi Server Class - Generic - GObject - Control - Boolean. The refnum label changes to BoolRefnum.
6. On sub-vi block diagram, create Property Node (Functions - Application Control - Property Node). Find the BoolRefnum and move it close to the new Property Node.
7. Wire the BoolRefnum to the reference input of the property node.
8.
Right click on the property node and select Change to All Write.
9. Move mouse to point to Visible inside property node box, left click and select Value.
10. Wire the boolean indicator from step 3 to the Value input of the property node.
11. On sub-vi front panel, right click on icon and select Show Connector.
12. Click on empty connector spot then click on the new BoolRefnum. Save your sub-vi.
13. On main vi block diagram, connect refernece created in step 2 to the new connector terminal of sub-vi.
14. Save and run.
Here are the modified vi's.
- tbob
Inventor of the WORM Global
Attachments:
Pass_a_Reference.vi ‏20 KB
GL_Flicker_mod.vi ‏83 KB

I don't understand how to use Dreamweaver CC free trial

I know how to use to program but how do I start it? How do I get the screen where I build the website. I downloaded everything, says I have it, but when I try to use it it just brings me back to the adobe website. Please help.

It is very hard to see what you have done and where it is going wrong.
Basically, DWCC is no different to a boxed version, the main difference being the source of the installation files. On the one hand the source comes from a CD, the other from the Internet.
The other difference is the way the program is authenticated. The boxed version has a serial number, the CC version is authenticated online.
The questions to ask yourself for a properly functioning CC version
1. Has the program installed properly
2. Do I have the authorisation from Adobe to run the program.

I get a message Debug Error:[Exception... "Node was not found" code: "8" nsresult: "0x80530008 (NS_ERROR_DOM_NOT_FOUND_ERR)" location: "chrome://ffebayhot/content/lib/Extension.debug.js Line: 366"] using Vista. I don't understand how to delete the "ebay

Every time I try to use google for a search, I get the following error msg. Debug Error:[Exception... "Node was not found" code: "8" nsresult: "0x80530008 (NS_ERROR_DOM_NOT_FOUND_ERR)" location: "chrome://ffebayhot/content/lib/Extension.debug.js Line: 366"]. I saw the solution provided for MS XP, but not for Vista. Also, while I saw the solution, I need more explicit instructions on how to "delete the ebay extension".
== This happened ==
Every time Firefox opened
== When I try to load google from Firefox, I get the error message, Debug Error:[Exception... "Node was not found" code: "8" nsresult: "0x80530008 (NS_ERROR_DOM_NOT_FOUND_ERR)" location: "chrome://ffebayhot/content/lib/Extension.debug.js Line: 366"]

Tools->Add-ons->Extensions
At the top of the Firefox window, click on the Tools menu and select Add-ons. The Add-ons window will appear.
In the Add-ons window, select the Extensions panel.
Select the add-on you wish to uninstall.
Click the Uninstall button. When prompted, click Uninstall to confirm.
Then restart Firefox.
Read here:
[[Uninstalling add-ons|#How to uninstall extensions and themes|Uninstalling extensions]]

I don't know how to use the property node to get information out of my sub vi while it is working.

I had a question answered earlier about passing information out of a sub vi, and was helped out. The problem is that I don't understand what is happening as I can not reproduce the results. I am now trying to take results of a comparison (true-false) and pass that back out of my sub vi. I tried a property node and to connect a refnum control to it in the sub vi. Then I tried to connect an indicator to its terminal in the main vi, but was unsuccessful can someone tell me how and why, step by step, to pass this information out. Starting with the point of information in the sub vi to the indicator in the vi. I would appreciate any help that you could give m
e.
Attachments:
Pass_a_Reference.vi ‏15 KB
GL_Flicker_mod.vi ‏77 KB

Step by step:
1. On your main vi Front Panel, create your boolean indicator.
2. On the block diagram, right click the new boolean indicator and select Create - Reference.
3. On sub-vi front panel, create boolean indicator (or use one that is already created).
4. On sub-vi front panel, create a reference (Controls Palette - Refnum - Control Refnum).
5. Right click on the newly created Refnum and select Select Vi Server Class - Generic - GObject - Control - Boolean. The refnum label changes to BoolRefnum.
6. On sub-vi block diagram, create Property Node (Functions - Application Control - Property Node). Find the BoolRefnum and move it close to the new Property Node.
7. Wire the BoolRefnum to the reference input of the property node.
8.
Right click on the property node and select Change to All Write.
9. Move mouse to point to Visible inside property node box, left click and select Value.
10. Wire the boolean indicator from step 3 to the Value input of the property node.
11. On sub-vi front panel, right click on icon and select Show Connector.
12. Click on empty connector spot then click on the new BoolRefnum. Save your sub-vi.
13. On main vi block diagram, connect refernece created in step 2 to the new connector terminal of sub-vi.
14. Save and run.
Here are the modified vi's.
- tbob
Inventor of the WORM Global
Attachments:
Pass_a_Reference.vi ‏20 KB
GL_Flicker_mod.vi ‏83 KB

Don't know how to use the swing timer

Hi there,
I did this stupid game for training purposes: There are 3 buttons, 2 of them are "correct", 1 exits the program and you lost.
It works so far but when clicking the "wrong" button I thought of changing the frame to red, let the program wait for another second and only then closing the window. But somehow that doesn't work. I understand that I have to use the timer class, but somehow I don't really know how.
Thanks for helping.
Modify the program of Exercise 3 so that only one button exits the program. If the user clicks on any of the other two
buttons, the frame just changes color. The user keeps clicking until the "loosing button" is clicked. The user's goal
is to click as many times as possible.
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import java.util.Random;
public class Kap59A4 extends JFrame implements ActionListener
JButton button1 ;
JButton button2 ;
JButton button3 ;
JLabel noGames ;
int gameCounter = 0;
// constructor
public Kap59A4(String title)
    super( title );
    button1 = new JButton("Button 1");
    button2 = new JButton("Button 2");
    button3 = new JButton("Button 3");
    noGames = new JLabel("Game#: ");
    // register the Kap59A4 frame as the listener for the button.
    button1.addActionListener( this );
    button2.addActionListener( this );
    button3.addActionListener( this );
    setLayout( new FlowLayout() );
    add( button1 );
    add( button2 );
    add( button3 );
    add( noGames );
    setDefaultCloseOperation( JFrame.EXIT_ON_CLOSE );
public void actionPerformed( ActionEvent evt)
    Random rand = new Random();
    int number = Math.abs( rand.nextInt() )%3; // number gets a number from 0 to 2
    if (number != 0)
      gameCounter++;
      noGames.setText("Game#: "+ gameCounter);
      getContentPane().setBackground( Color.green );
      repaint();
    else
      getContentPane().setBackground( Color.red );
      new Timer(1000, this).start();
      System.exit(0);
public static void main ( String[] args )
    Kap59A4 demo = new Kap59A4( "Click a Button" ) ;
    demo.setSize( 300, 100 );
    demo.setVisible( true );
}

Rather than pass the Timer constructor this, which would be the JFrame itself, thus resulting in the action handler for the buttons being invoked again, you should probably pass it a whole different ActionListener instance that performs the precise action you want to happen a second later.
And actually, you should probably do that for all the buttons as well -- give each an inner class implementing ActionListener so you can control the behavior of each button, and don't make the JFrame subclass implement ActionListener. Furthermore, I'd advise against subclassing JFrame.

Don't understand how to do the proxy setting to configured with computer need phone no. for help Please!

try and open a web pg. that friend sent me it keeps coming up on screen in box says, The Proxy server refusing connections Firefox is configured to use a proxy server that is refusing connections , Check t proxy settings to make sure that , they are correct,Check network to see if proxy server is working
okay so how do I fix this cause really don't understand what this means , Help! to fix as I am missing a lot of information I would like to read .KMH

You can find the connection settings in Tools > Options > Advanced : Network : Connection
If you do not need to use a proxy to connect to internet then select "No Proxy" if the default "Use the system proxy settings" setting doesn't work.
See "Firefox connection settings":
* https://support.mozilla.com/kb/Firefox+cannot+load+websites+but+other+programs+can

Don't know how to use the air print with my ipads.

i just bought an mg3222 printer and i don't know how to figure out how to use air print with my ipad and ipad minis. Can anybody help??? Thanks

Hello.
In order to use the printer with your iOS devices, please make sure that the units are all connected to the same WI-Fi router. Once this has been done you should be able to print.
The initial Wi-Fi setup of the MG3222 would have to be done from a compatible Windows or Mac OSX computer.
If additional assistance is needed, feel free to call us at 1-800-OKCANON.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

I don't understand how to put the core files on usb stick

I read the instructions here http://wiki.archlinux.org/index.php/Ins … _USB_stick but I am not sure how to do this I tried this way ( using cmd prompt on winxp x64) dd if=C:\Documents and Settings\Administrator\My Documents\Torrents\archlinux-2008.06-core-x86_64.img=/dev/sd[F]
but I get an error saying that dd is an unrecognized command, I have also downloaded Flashnul but I am not sure how to use it if I type in anything I cannot execute it because as soon as I push the enter key Flashnul quits. so could someone explian to me how to do this please

jo3 wrote:
dd is a unix command.
I have not used flashnul in a while so IIRC first plug in your usb stick and type "flashnul -p" at a command prompt to get a list of devices. Then type "flashnul flash_device_number -L archlinux-2008.06-core-x86_64.img" to copy the img to the device.
HTH
-jo3
hank you for your reply.
Well Iguess flashnul isn't working properly because when I type in "flashnul -p" it just quits.
I installed Cygwin and have tried to install it that way but I was getting errors saying no such file or dir.
Well it ended up being that my usb stick was "f: I kept trying dd if=archlinux-2008.06-core-x86_64.img of=\\.\f:Kingston"and not "f: I kept trying dd if=archlinux-2008.06-core-x86_64.img of=\\.\f"
I am thinking that the The Cygwin Way
Make sure your cygwin installation contains the dd package.
Place your image file in your home directory, in my case it is:
C:\cygwin\home\John\
Run cygwin as administrator (required for cygwin to access hardware). To write to your USB drive use the following command:
dd if=image.img of=\\.\[x]:
where image.img is the path to the img file within the cygwin directory and \\.\[x]: is your USB device where x is the windows designated letter, in my case "\\.\d:".
Note: This will irrevocably delete all files on your USB stick, so make sure you don't have any important files on the stick before doing this.
should say that for noobs like me

I'm in trouble... I can't understand how to use the tabs...

I need tu use the tabs in a webpage but I can't find how I must made. The helps don't help me, maybe I don't see in the right place?
Thanks for the answer.

Have a look here.

Q: I don't understand how to use the teeth whitening tool in PSE 9.

Similar Messages

Maybe you are looking for