Q: I enabled an extension in command line, but I got the message --- "Dreamweaver" is not supported.

The product name you input should be the same as the product name displayed in the product panel of EM window. For example, "Dreamweaver CS5.5".

You can only play 720p video.
Download the 720p or standard def version.

Similar Messages

Is there any command line tool to view the message on the topic?

Hi
How can I view/browse the messages on the queue/topic, without write a program?
Jirong

Hi,
I would recommend you to have a look at this excellent Hermes: http://www.hermesjms.com/
Cheers
Arnaud

I tried to purchase on line but always I get message contact I tunes support.

I tried to make a payment to on line game but always I get a message to contact I tunes support, in a time all my paying details is complet and right.

Click here and request assistance.
(91696)

Run App Engine through command line but have it show up in Process Monitor

We are trying to run Application Engine through command line and have it show up in the Process Monitor.
We have successfully ran the Application Engine through command line. We also can successfully run the Application Engine through PIA.
Only when you run the AppEng through PIA it goes through the Process Scheduler and shows up in the Process Monitor.
We would like to be able to do this through command line as well. Has anyone done this before?

I'm not sure if it is (easily) doable.
=> Fire a process through the front end appl is nothing but insert few rows in process scheduler tables settings (PSPRCSRQST, PSPRCSQUE), then the process scheduler is taking information from there every x seconds and eventually run the command (on the process scheduler server) keeping an eye on the process result in the tables to post the result.
=> Fire psae through command line (or pssqr) bypass the process scheduler, you can run it from any client... so even without any clue about Process Scheduler server or even without Process Scheduler at all (cf. the very first AE running during an installation is VERSION without anything else than the client).
So finally, your AE program has no clue where it should run outside the client you are fired the command from (i.e. on the batch server as it is running when you are fired the same AE through the front end application), nothing more about the process scheduler configuration file, and where the output files should be posted.
Maybe not by running the AE from the command line, but by simulating the actions as it would be from the front end application, for instance by inserting in the tables whatever you want to run... but it sounds odd. Probably some developer might have done this before... but this should be reconsidered by Peopletools version/patch level (or through CI ?)
Nicolas.
added the last paragraph
Edited by: N Gasparotto on May 21, 2010 2:46 PM

Errors when packaging extension via Extension Manager Command Line

Hi all,
I am attempting to package an Adobe Fireworks extension via the CS6 Extension Manager command line tool:
/Applications/Adobe\ Extension\ Manager\ CS6/Adobe\ Extension\ Manager\ CS6.app/Contents/MacOS/Adobe\ Extension\ Manager\ CS6 -suppress -package product="Fireworks CS6" mxi="name.mxi" mxp="name.mxp"
I get the following error:
error: +++ Assert in file /export/home/coretech/source/daily/extendscript/scriptobjects/build/xcode24/../../source/ bridgetalk/source/SoBridgeTalk.cpp, line 117
+++ BridgeTalk::InitTerm::exit() has already been called.
Debugger() was called!
Does anyone have any suggestions on how to proceed?
Best,
Dmitriy

1. There is no "product" attribute in package command. Please remove it.
2. Why do you still package mxp? MXP has some limitations and is no longer supported in Extension Manager CC. You should package ZXP instead.
3. Extension Manager CS6 can't sign extension during package. We have a new free product called Adobe Exchange Packager which can package and sign extensions. You can sign in http://www.adobeexchange.com/ and go to Resources page to download it. The current version in this page can't package extension based on existing mxi file. The latest version meets your requirement and will be available in a couple of days.

Error -402 upon installing an extension via Command Line

When I try to install my extension via command line, i receive the following error message:
"Failed to install, status = -402!"
What does this error code -402 mean?
I found someone with a similar problem in the forums: Re: Extension Manager CC failed to install extension
He/She had file names containing non-ASCII characters. But i couldn't find any non-ASCII characters in my project or extension.
Thanks in advance,
Andreas

Hi Carl,
unfortunately unchecking the option did not work. This is what I found in the logs:
ExManCoreLibrary.log:
[Debug] Thu Oct 09 09:01:03.891 2014 (SignatureValidator.cpp, 48) -CSignatureValidator::verifySignature: Begin to validate signature /var/folders/yw/dnnpmtmn2xldzzs62gkq_lhm0000gn/T/tmp8212baaaaa
[Debug] Thu Oct 09 09:01:03.924 2014 (SignatureValidator.cpp, 68) -CSignatureValidator::verifySignature: End to validate signature /var/folders/yw/dnnpmtmn2xldzzs62gkq_lhm0000gn/T/tmp8212baaaaa
[Error] Thu Oct 09 09:01:03.924 2014 (SignatureValidator.cpp, 105) -CSignatureValidator::verifySignature: ZXPSign_verify() failed for "/var/folders/yw/dnnpmtmn2xldzzs62gkq_lhm0000gn/T/tmp8212baaaaa", sign_status is 50!
[Error] Thu Oct 09 09:01:03.924 2014 (ExtensionBase.cpp, 170) -CExtensionManager::validateExtension: CSignatureValidator::verifySignature() failed for "/var/folders/yw/dnnpmtmn2xldzzs62gkq_lhm0000gn/T/tmp8212baaaaa", status is -402!
[Error] Thu Oct 09 09:01:03.924 2014 (ExtensionBase.cpp, 607) -CExtensionBase::install: validateExtension() failed for zxp /Users/******/Desktop/plugin.zxp, status = -402!
log0.log:
10/9/2014 09:01:03.622 [INFO] com.adobe.exman.controller.InstallExtensionCommand execute(), InstallExtensionCommand is executed.
10/9/2014 09:01:03.624 [INFO] com.adobe.exman.controller.session.composite.CompositeUpdateSession initiate()
10/9/2014 09:01:03.624 [INFO] com.adobe.exman.controller.NotifyOperationBeginEndCommand execute(), NotifyOperationBeginEndCommand is executed.
10/9/2014 09:01:03.625 [DEBUG] com.adobe.exman.controller.gateway.ExternalGateway ###call2extensionMgr airNotifyOperationBeginOrEnd,29,install,1,0
10/9/2014 09:01:03.625 [INFO] com.adobe.exman.view.ExManApp handleNotification(), got notification: NOTIF_ACTION_BEGIN
notification body: [object ActionBeginParameter]
10/9/2014 09:01:03.625 [DEBUG] com.adobe.exman.view.ExManApp @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
10/9/2014 09:01:03.625 [DEBUG] com.adobe.exman.view.ExManApp NOTIF_ACTION_BEGIN
10/9/2014 09:01:03.625 [INFO] com.adobe.exman.ExManGUI canAcceptUIInput(), set to: false
10/9/2014 09:01:03.626 [INFO] com.adobe.exman.controller.AppWinOperationCommand execute(), AppWinOperationCommand is executed. notification=APPWIN_MODALDIALOG_POPUP
10/9/2014 09:01:03.626 [INFO] com.adobe.exman.controller.gateway.ExternalGateway ###appWinOperate(), sessionId: 30, opCode=10, mouseX=0, mouseY=0
10/9/2014 09:01:03.626 [DEBUG] com.adobe.exman.controller.session.composite.CompositeRollBackSession CompositeRollBackSession: executeNextSession()+++
10/9/2014 09:01:03.627 [DEBUG] com.adobe.exman.controller.session.composite.CompositeRollBackSession CompositeRollBackSession: supper.executeNextSession
10/9/2014 09:01:03.627 [DEBUG] com.adobe.exman.controller.session.composite.CompositeSession executeNextSession: run a frontend session
10/9/2014 09:01:03.628 [INFO] com.adobe.exman.controller.session.frontend.FrontendInstallExtensionSession initiate()
10/9/2014 09:01:03.628 [INFO] com.adobe.exman.controller.NotifyOperationBeginEndCommand execute(), NotifyOperationBeginEndCommand is executed.
10/9/2014 09:01:03.628 [DEBUG] com.adobe.exman.controller.gateway.ExternalGateway ###call2extensionMgr airNotifyOperationBeginOrEnd,31,install,1,0
10/9/2014 09:01:03.629 [INFO] com.adobe.exman.controller.session.composite.CompositeRollBackSession onChildSessionProgress() session total: 1 session lenght: 0 progress: 0 calculatedProgress: 0
10/9/2014 09:01:03.629 [INFO] com.adobe.exman.view.ExManApp handleNotification(), got notification: NOTIF_PROGRESS
notification body: 0
10/9/2014 09:01:03.629 [DEBUG] com.adobe.exman.view.ExManApp @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
10/9/2014 09:01:03.629 [DEBUG] com.adobe.exman.view.ExManApp NOTIF_PROGRESS
10/9/2014 09:01:03.629 [INFO] com.adobe.exman.view.ExManApp app got progress: 0
10/9/2014 09:01:03.633 [DEBUG] com.adobe.exman.controller.session.backend.InstallExtensionSession initiate
10/9/2014 09:01:03.633 [INFO] com.adobe.exman.controller.gateway.ExternalGateway installExtension(), the params to external install: sessionid=28, sourcepath= /Users/*******/Desktop/plugin.zxp
10/9/2014 09:01:03.633 [DEBUG] com.adobe.exman.controller.gateway.ExternalGateway ###call2extensionMgr externalInstallExtension,28,/Users/*******/Desktop/plugin.zxp
10/9/2014 09:01:03.634 [DEBUG] com.adobe.exman.view.ExManApp @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
10/9/2014 09:01:03.644 [DEBUG] com.adobe.exman.view.ExManApp NOTIF_RESET_SEARCH_BOX
10/9/2014 09:01:03.890 [INFO] com.adobe.exman.controller.gateway.Application ###Receive airCallBack Message28,9,30
10/9/2014 09:01:03.891 [INFO] com.adobe.exman.controller.gateway.ExternalGateway handleResponse(), parameters of handleResponse:
sessionId= 28
responseType= 9
responseBody=30
10/9/2014 09:01:03.891 [INFO] com.adobe.exman.controller.session.backend.BackendSession com.adobe.exman.controller.session.backend::InstallExtensionSession got parameters in handleResponse:
responseType= 9
10/9/2014 09:01:03.891 [INFO] com.adobe.exman.controller.session.backend.BackendSession responsebody 0 :30
10/9/2014 09:01:03.891 [INFO] com.adobe.exman.controller.session.frontend.FrontendInstallExtensionSession onBackendSessionProgress(), 30
10/9/2014 09:01:03.892 [INFO] com.adobe.exman.controller.session.composite.CompositeRollBackSession onChildSessionProgress() session total: 1 session lenght: 0 progress: 30 calculatedProgress: 30
10/9/2014 09:01:03.892 [INFO] com.adobe.exman.view.ExManApp handleNotification(), got notification: NOTIF_PROGRESS
notification body: 30
10/9/2014 09:01:03.892 [DEBUG] com.adobe.exman.view.ExManApp @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
10/9/2014 09:01:03.892 [DEBUG] com.adobe.exman.view.ExManApp NOTIF_PROGRESS
10/9/2014 09:01:03.892 [INFO] com.adobe.exman.view.ExManApp app got progress: 30
10/9/2014 09:01:03.933 [INFO] com.adobe.exman.controller.gateway.Application ###Receive airCallBack Message28,1,-402,com.crossmedia_solutions.assetInformation
10/9/2014 09:01:03.934 [INFO] com.adobe.exman.controller.gateway.ExternalGateway handleResponse(), parameters of handleResponse:
sessionId= 28
responseType= 1
responseBody=-402,com.crossmedia_solutions.assetInformation
10/9/2014 09:01:03.934 [INFO] com.adobe.exman.controller.session.backend.BackendSession com.adobe.exman.controller.session.backend::InstallExtensionSession got parameters in handleResponse:
responseType= 1
10/9/2014 09:01:03.934 [INFO] com.adobe.exman.controller.session.backend.BackendSession responsebody 0 :-402
10/9/2014 09:01:03.934 [INFO] com.adobe.exman.controller.session.backend.BackendSession responsebody 1 :com.crossmedia_solutions.assetInformation
10/9/2014 09:01:03.937 [INFO] com.adobe.exman.controller.session.frontend.FrontendInstallExtensionSession onBackendSessionFail()
10/9/2014 09:01:03.938 [INFO] com.adobe.exman.controller.NotifyOperationBeginEndCommand execute(), NotifyOperationBeginEndCommand is executed.
10/9/2014 09:01:03.938 [DEBUG] com.adobe.exman.controller.gateway.ExternalGateway ###call2extensionMgr airNotifyOperationBeginOrEnd,32,install,0,0
10/9/2014 09:01:03.938 [DEBUG] com.adobe.exman.controller.session.composite.CompositeSession notifySuperSessionFail: set LASTSESSION FAILED
10/9/2014 09:01:03.938 [INFO] com.adobe.exman.view.ExManApp handleNotification(), got notification: NOTIF_ACTION_FAIL_WITH_PARENT_SESSION
notification body: [object SessionCompleteParameter]
10/9/2014 09:01:03.939 [DEBUG] com.adobe.exman.view.ExManApp @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
10/9/2014 09:01:03.939 [DEBUG] com.adobe.exman.view.ExManApp NOTIF_ACTION_FAIL_WITH_PARENT_SESSION
10/9/2014 09:01:03.939 [ERROR] com.adobe.exman.view.ExManApp null extension!
10/9/2014 09:01:03.939 [INFO] com.adobe.exman.view.ExManApp onSessionCompleteFail()
10/9/2014 09:01:03.940 [INFO] com.adobe.exman.view.ExManApp onActionFailHelper()
10/9/2014 09:01:03.940 [INFO] com.adobe.exman.ExManGUI canAcceptUIInput(), set to: false
10/9/2014 09:01:03.940 [INFO] com.adobe.exman.controller.AppWinOperationCommand execute(), AppWinOperationCommand is executed. notification=APPWIN_MODALDIALOG_POPUP
10/9/2014 09:01:03.941 [INFO] com.adobe.exman.controller.gateway.ExternalGateway ###appWinOperate(), sessionId: 33, opCode=10, mouseX=0, mouseY=0

Sending image sequence job to compressor in command line : how to set the framerate?

Hello,
In Compressor, when you import a image sequence, it's possible to set the framerate and add an audio file before choosing a preset and lauching the encoding task.
I want to dlo the same thing with command line. I know how to send a compressor job with command line, but no how to add theses settings.
In the compressor command line help, we've got this :
Job Info: Used when submitting individual source files. Following parameters are repeated to enter multiple job targets in a batch
          -jobpath <url> -- url to source file.
                                           -- In case of Image Sequence, URL should be a file URL pointing to directory with image sequence.
                                           -- Additional parameters may be specified to set frameRate (e.g. frameRate=29.97) and audio file (e.g. audio=/usr/me/myaudiofile.mov).
So there are also framerate and audio parameters in command line but i've no idea how to write the command line with theses parameters
Here is an example of command line for Compressor (by Apple) :
./Compressor ‑clusterid tcp://127.0.0.1:51737 ‑batchname myBatch ‑jobpath /Volumes/Source/ShortClips/NTSC24p.mov ‑settingpath /Users/stomper10/Library/Application\ Support/Compressor/PhotoJPEG.setting ‑destinationpath /Users/machinename/Movies/myDestinationFilename.mov.
Thank you for your help!

You can see in the command sh running-config command
show running-config : Displays the current access point operating configuration
Use the guest-mode SSID configuration mode command to configure the radio interface (for the specified SSID) to support guest mode. Use the no form of the command to disable the guest mode.
[no] guest-mode .
Here is the guideline for usage
The access point can have one guest-mode SSID or none at all. The guest-mode SSID is used in beacon frames and response frames to probe requests that specify the empty or wildcard SSID. If no guest-mode SSID exists, the beacon contains no SSID and probe requests with the wildcard SSID are ignored. Disabling the guest mode makes the networks slightly more secure. Enabling the guest mode helps clients that passively scan (do not transmit) associate with the access point. It also allows clients configured without a SSID to associate.
Examples
This example shows how to set the wireless LAN for the specified SSID into guest mode:
AP(config-if-ssid)# guest-mode
This example shows how to reset the guest-mode parameter to default values:
AP(config-if-ssid)# no guest-mode

Query runs from command line, but not from scheduler

We use Control-M to schedule shell scripts to be run on a Solaris server. Some of the scripts have to access an Oracle database and in that case our security team will include the DB user and password in the script, then encrypt it and the sys admin team schedules the encrypted shell script with Control-M. That works fine, but we've been trying to have the DB user and password on a separate encrypted file so that we don't have to ask for file encryption every time it's necessary to modify a script (this is a test environment).
We have the script at ~/system_name/scripts, the query at ~/system_name/sql and the encrypted file and key at ~/system_name/keys. The SQLPlus call in the script is:
${ORACLE_HOME}/bin/sqlplus "`decrypt -a 3des -k ./../keys/key.3des.system -i ./../keys/login.system`"@instance_name <<EOF
@${DIR_SQL}/TEST_QUERY.SQL
quit
EOF
The security analyst has tested is successfully from command line, but when we schedule it with Control-M the job abends and we get the following in the sysout:
+ decrypt -a 3des -k ./../keys/key.3des.system -i ./../keys/login.system
decrypt: cannot open ./../keys/key.3des.system
decrypt: invalid key.
+ /u00/app/oracle/product/11.1.0/db_1/bin/sqlplus @instance_name
+ 0<<
@/sistemas/hmp/system_name/sql/TEST_QUERY.SQL
quit
SQL*Plus: Release 11.1.0.6.0 - Production on Mon May 3 09:41:55 2010
Copyright (c) 1982, 2007, Oracle. All rights reserved.
SP2-0310: unable to open file "instance_name.sql"
Enter user-name: SP2-0306: Invalid option.
Usage: CONN[ECT] [logon] [AS {SYSDBA|SYSOPER|SYSASM}]
where <logon> ::= <username>[<password>][@<connect_identifier>] [edition=valu\
e] | /
SP2-0306: Invalid option.
Usage: CONN[ECT] [logon] [AS {SYSDBA|SYSOPER|SYSASM}]
where <logon> ::= <username>[<password>][@<connect_identifier>] [edition=valu\
e] | /
Enter password:
ERROR:
ORA-12545: Connect failed because target host or object does not exist
SP2-0157: unable to CONNECT to ORACLE after 3 attempts, exiting SQL*Plus
0000000080
Any ideas?

Looks like the command is being split in some way - the connection to sqlplus is being made before it completes the whole string
It appears to be seeing the @instance_name as a script to execute rather than a db to connect to.
Is the database on the same server as the script?
If so, try setting your environment to the correct databsae, so that you can omit the @instance_name part of the syntax and see if it helps
Also just noticed the failure to open the decrypt script. It would appear uyou are not using a full path name. Have you checked which directroy the scheduled job starts in? You may need to look at running some environment specific scripts first.
Edited by: LindaA on 05-May-2010 07:43

Linux: Pipe to stdout displays on the command line, but does not redirect to file

Hello all,
Several years ago, I was given the task of making a LabVIEW application run from the Linux command line with arguments.
Now I have the same task, and I naively thought, "Sure, no problem." So, for my stdout output, I used something very similar to the following:
It seems to work fine in a compiled application, as it always has, and the prescribed string appears on the command line window. However, the person testing the functionality here remarked that he couldn't successfully redirect output to a file.
For example:
If my compiled binary is "LabVIEW_executable", let's say it is called in the following manner:
/foo/bar> ./LabVIEW_executable >foo.txt
Since the desired output appears on the command line, you'd intuitively think that it would also appear in foo.txt, but it does not. After tinkering for a while and coming up with very little in the way of search results, I thought I'd ask here.
Has anyone ever done this before?
I am very grateful for any assistance.
Regards,
Jim

Ahhh, thanks a lot!
Whoops. Looks like I made a novice mistake.
Nice icon, by the way.

How do I process user command line arguments inside of the Sequence Editor?

Using TestStand 4.0, how would I go about storing "extra" command line arguments processed from the /runentrypoint command in the Sequence Editor specifically?

djdewitt -
TestStand 4.2 does not have this feature; however, we do have an internal issue (#163169) to track this request. You can actually get the commandline passed to the TestStand Sequence Editor using the below psuedo code in a sequence; however, currently the TestStand Sequence Editor displays a prompt when it does not recognize a custom token on the command-line and there is no way to suppress this.
Locals.AppMgrRef = RunState.Engine.GetInternalOption(InternalOption_ApplicationManager);
Locals.CommandsRef = Locals.AppMgrRef.CommandLineArguments;
Locals.CountNum = Locals.CommandRef.Count;
For i=0 to Locals.CountNum - 1
Locals.CommandString = Locals.CommandRef.Item(i);
End
One suggestion is to use a batch file to write the commands to a dedicated text file and then launch the sequence editor. You can then use a sequence in the sequence editor to read from the file.
Lastly, I just tried something and I do not necessarily recommend this, but I noticed that the Sequence Editor does not prompt when using the /goto token, so if I use the below command-line, it seems that no prompt appears, the goto command does nothing, and the psuedo code accesses the command-line tokens:
"C:\PathToApp\SeqEdit.exe" /goto "location tokens that do nothing" /run MainSequence "C:\PathToSequenceFile\GetCommandLineArgs.seq"
Keep in mind that NI does not necessarily support this but it does seem to work for now.
Scott Richardson
National Instruments

Work from command line but did not work from JSP call

I have a test class that should perform Triple DES. When I run it from command line work ok, but when runs from JSP it give me an error:
Exception:
======================================
javax.crypto.IllegalBlockSizeException: Input length not multiple of 8 bytes
put 3 check points inside the code, and run it from command line and here is the result:
C:\Documents and Settings\salasadi\Desktop\DigitalMailer>java TDESStringEncrypto
r 123456781234567812345678 "CID=103&A
this is pass 3
this is pass 1
this is pass 2
here is the class:
import javax.crypto.*;
import javax.crypto.spec.*;
import java.security.*;
import java.io.*;
public class TDESStringEncryptor
static final int DATA_STRING_LENGTH = 64;
public static void main(String[] args)
try
TDESStringEncryptor enc = new TDESStringEncryptor();
String value = enc.Encrypt(args[0], args[1]);
System.err.println(value);
catch (Exception ex)
System.err.println(ex);
public String Encrypt(String inkey, String data)
throws Exception
// convert key to byte array and get it into a key object
byte[] rawkey = inkey.getBytes();
DESedeKeySpec keyspec = new DESedeKeySpec(rawkey);
SecretKeyFactory keyfactory = SecretKeyFactory.getInstance("DESede");
SecretKey key = keyfactory.generateSecret(keyspec);
Cipher cipher = Cipher.getInstance("DESede/ECB/NoPadding");
cipher.init(Cipher.ENCRYPT_MODE, key);
byte[] out = cipher.doFinal( padString(data).getBytes( ) );
System.out.println("this is pass 1");
return byteArrayToHexString( out );
private String byteArrayToHexString(byte in[])
byte ch = 0x00;
int i = 0;
if ( in == null || in.length <= 0 )
return null;
String pseudo[] = {"0", "1", "2", "3", "4", "5", "6", "7", "8",
"9", "A", "B", "C", "D", "E", "F"};
StringBuffer out = new StringBuffer( in.length * 2 );
while ( i < in.length )
ch = (byte) ( in[i] & 0xF0 );
ch = (byte) ( ch >>> 4 );
ch = (byte) ( ch & 0x0F );
out.append( pseudo[ (int) ch] );
ch = (byte) ( in[i] & 0x0F );
out.append( pseudo[ (int) ch] );
i++;
String rslt = new String( out );
System.out.println("this is pass 2");
return rslt;
private String padString( String s )
StringBuffer str = new StringBuffer( s );
int strLength = str.length();
for ( int i = 0; i <= DATA_STRING_LENGTH ; i ++ )
if ( i > strLength ) str.append( ' ' );
System.out.println("this is pass 3");
return str.toString();
And here is the JSP call:
TDESStringEncryptor encryptz = new TDESStringEncryptor();
String cryptodata1 = encryptz.Encrypt(Keyz,cryptodata);
Thanks

Please use [ code ] tags when posting code.
Please indicate the line that causes the exception.
Please indicate what Keyz and cryptodata is.

How to modify Exchange 2013 TXT(SMS) notifications to not include the subject line or any of the message body of emails

We have a group of users who are not permitted to download/save any emails they receive onto public or personal devices, they are only allowed to log in manually and view their mail through OWA (I realize there are ways to use OWA to download mail, however
the users are explicitly forbidden from doing this, and any countermeasures that can be put in place, are/will be).
With our new Exchange 2013 server, it seems it has the built in capability to send TXT(SMS) notifications instantly when a user receives mail. We would like to allow our users to utilize this feature, however currently, the notification includes not
only the sender of the email, but also the subject line and part of the message body. As it stands, we can't have this as part of the email would then be saved on their device.
I am wondering if there is a way to modify Exchange 2013 to not include the subject or message body, so that our users could at least get an instant notification 1-that they have a new email and 2-who it's from?
Any information would be appreciated, thanks!

We can configure SMS Text Message Notification for various situation like Calendar notifications, Voice mail notifications, Email notifications if your user's Mailbox hosted in Exchange Server 2013
To set up your phone to receive text messages when you want to have Calendar notifications, Voice mail notifications, Email notifications use the steps as follows
Note: Text message fees are applicable and it will appear on your phone bill.
Login to Outlook Web App, click Options > See All Options > Phone > Voice Mail tab.
In the Notifications section, choose one of the following options:
Calendar notifications...
Voice mail notifications...
Email notifications using an Inbox rule...
Turn On Notification
First step is to turn on the notification of text messaging. Click Turn on Notifications
Select Setup Notification: Need to select your operator,
It will request to provide your Mobile Operator.
Note: As of now Exchange Server 2013 supports only the below list of operators.
Locale: United State
Mobile Operator: AT & T, Sprint PCS, T-Mobile, Verizon Wireless
Locale: Canada,
Mobile Operator:Bell Telus Mobility
Locale: Romania
Mobile Operator:Orange Romania
Provide your telephone number. It will send you the passcode on your mobile number.
Type the passcode for confirmation
Calendar Notifications:
On Selecting Calendar Notification: Select the option based upon your requirement.
Email Notification Using Inbox Rule:
Similarly for the text messaging for the email notification, select the option based upon your requirement and setup them up
Exchange Queries

I tried to install vonage extensions application but i got the answer''your request could not be completed. how can i do this?

i tried to install vonage extensions application but i got the answer''your request could not be completed. how can i do this?

when are you getting the message? are you downloading the proper app from the app store?

I downloaded the new 9.? version told my PC to run it. It said to restart my system to take effect. I did. Every time I try to get on line it gives me the message that I need to restart my system. What should I do?

I downloaded the new 9.? version told my PC to run it. It said to restart my system to take effect. I did. Every time I try to get on line it gives me the message that I need to restart my system. What should I do?

Do a clean (re)install and delete the Firefox program folder (C:\Program Files\Mozilla Firefox\).
Download a fresh Firefox copy and save the file to the desktop.
*Firefox 9.0.x: http://www.mozilla.org/en-US/firefox/all.html
Uninstall your current Firefox version, if possible.
*Do NOT remove personal data when you uninstall the current version or you lose your bookmarks and other data in the profile folder.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

Everytime i go to plug my ipod 5 in with the charger in to the mac desktop computer a message says "USB DEVICE DISABLED" "unplug the device using to much power to re-enable usb devices" and ever since i had got that message my charger had s

everytime i go to plug my ipod 5 in with the charger in to the mac desktop computer a message says "USB DEVICE DISABLED" "unplug the device using to much power to re-enable usb devices" and ever since i had got that message my charger had stopped working even plug into a wall outlet
ps.its my only charger and i need to know if i can fix this problem or my mac broke my charger

Hey HoustonSmith, using to much power generally means a short. Do not use this cable, the lighting cables have a history of failure; shorting out. If within one year of purchase date take it to Apple, the cable also has a one year warranty, if short is do to manufacturing flaw and not abuse Apple will replace it free! Otherwise a new cable is around $30. You could also try a reset or restore, but don't think a glitch is your problem. If you do try to restore, just remember to make backup copies of all the info / data on this iPod to your computer first, then attempt to restore. Good luck. Cheers.

Q: I enabled an extension in command line, but I got the message --- "Dreamweaver" is not supported.

Similar Messages

Maybe you are looking for