[Q] Login failure under CDE environment

All..
I set up the new SUN UNIX server (SUN v440, SunOS 5.8).
It is set NIS,NFS etc environment and Now I can access the server via telnet, ftp.
However, when I try to access under CDE environment through X-termial (such as Exceed), I cannot log in the UNIX server.
Usually DT login trouble that I met is caused by network trouble.
But in this case, I can connect that UNIX server via telnet, ftp. And network configuration is set correctly.
I have no clue how to solve this trouble.
Would anyone let me know what I should check out or investigate ?
Thanks in advance.

Hi,
Its good that u pasted the complete log file. In your environment you have to run this upgrade tool only once from any of the middle tier.
And with respect to your error that u got in precheck is quite simple. All u have to do is just run this script from by connecting to portal schema using sqlplus.
Run dropupg.sql
Location-------- /raid/product/OraHome_1/upgrade/temp/portal/prechktmp/dropupg.sql
Later you re-run the upgrade tool and let me know the status.
Good luck
Tanmai

Similar Messages

How to keep track of EJBs in case of failover under clustered environment?

Does anybody know what happens with a stateless session EJB in
weblogic 5.1 under clustered environment, in case of a failover (if
one of computers dies), the one, which keeps that ejb in a pool?
Does that EJB automatically go to the state "does not exist"?
Is method ejbRemove() then called on that EJB?
Or is it still in the "method-ready pool" state? Without ejbCreate()
method being called on this EJB?
Or does it disappear completely without those methods being called on
this EJB?
I need to organize some kind of tracking for those EJBs, and it is
critically important for me to understand what exactly methods are
called on those EJBs.
I saw this, but it does not answer my question:
Clustered EJB
All EJBs are clusterable. If an EJB is deployed on multiple servers in
the cluster, each of these servers will be able to host instances of
the bean. This does not necessarily mean, however, that the bean
instances are clustered.
EJB Homes
All bean homes are clusterable. When a bean is deployed on a server,
its home is bound into the cluster-wide naming service. Because homes
are clusterable, each server can bind an instance of the home under
the same name. When a client looks up this home, it gets a
replica-aware stub that has a reference to the home on each server
that deployed the bean. When create() or find() is called, the
replica-aware stub routes the call to one of the replicas. The home
replica that receives the finds or creates an instance of the bean on
its server.
Stateless EJBs
When a home creates a stateless bean, it returns a replica-aware stub
that can route to any server on which the bean is deployed. Because a
stateless bean holds no state on behalf of the client, the stub is
free to route any call to any server that hosts the bean. Also,
because the bean is clustered, the stub can automatically fail over in
the event of a failure. The stub does not automatically treat the bean
as idempotent, so it will not recover automatically from all failures.
If the bean has been written with idempotent methods, this can be
noted in the deployment descriptor and automatic fail-over will be
enabled in all cases.
Thanks

Check out Java's support for udo/redo: [http://java.sun.com/javase/6/docs/api/javax/swing/undo/package-summary.html]
Also, google the "Memento Pattern".
You don't have to make copies of objects, just maintain commands the can undo and redo your program's state.

After creating a contained database, getting a login failure error while trying to connect to it.

After creating a contained database and a user with passowrd under the same database, I tried connecting to the contained database. I entered the server name, login credentials and went to the connection properties tab to select the contained database using
<browse server> option under "connect to database". Here I get the login failure error.
TITLE: Browse Server for Database
Failed to connect to server <servername>\<login>. (Microsoft.SqlServer.ConnectionInfo)
But when I manually enter the Database name instead of selecting from the <browse server> option the connection gets through.
Is this a Bug ? Has anyone else faced this error?

Hello,
Is this a Bug ? Has anyone else faced this error?
It's not a bug, it's working as intended. Contained users don't have instance level permissions and cannot "login" to the instance (which is what the "browse" button is attempting). In order for it to work, the database name must be in the connection string
(which with the browse button, it will not be).
Welcome to contained users, they aren't for everyone.
Sean Gallardy | Blog | Microsoft Certified Master

.mac login failure

Syncing worked fine then got a message that .mac login had failed . This keeps happening. What to do?

I keep 3 Macs synced (version 1.5) for my wife. She has a terrible time trying to be in 2 (or 3) places at the same time. At any rate, one of the Macs refused to sync with errors from ".mac login failure" to "couldn't sync at this time - only one computer is allowed to ...." I tried everything from deleting the plist for iSync to unregistering and re-registering. Ok, so I should reinstall iSync (1.5 on our systems) but, didn't have what it takes to reinstall only from the CD.
I took a stab and downloaded the 1.5 upgrade and ran it (after repairing permissions) re-registered the computer (under a different name) and it worked like a charm! (By the way, I tried using a different name while re-registering the computer and it didn't work.)
Again, I didn't uninstall iSync, but ran the updater and got great results. I don't know why, just took a stab at it.
Thought I'd past it on ...
Doug

WebAccess Login Failure

Hi all.
I just finished recreating my certificate authority as it's certificate had expired. I then used PKIDiag and tckeygen to renew the DNS and IP certs for webaccess and re-export the key for Tomcat. This went smoothly without any errors.
However, when I try to log in to web access, I get the following error: "Please login again. You may have typed your name or password incorrectly. Remember that passwords are case sensitive.", even though they are the correct name and password. It also does not matter which user logs in.
Webaccess logs only show "Login failure" for the user.
Where do I begin to troubleshoot this? Does webaccess have better logs somewhere? Even on verbose the logs still only seem to show Login Failure.
Thanks for any information anyone has.
Scott
Scott Schaffer
Network Admin
Olive Waller Zinkhan & Waller LLP

Thanks for the info Laura.
I checked my settings. Under the PO object, both LDAP and eDirectory authentication are enabled. Should this only be one or the other? If i I disable one, do I need to restart anything for the change to be seen?
As for the ldap server object. it is pointing to the der cert I exported from the private key of the CA after recreating it. Do I need to restart ldap for it to use the new exported der file? It has the same name as the old one.
Thanks,
Scott
Scott Schaffer
Network Admin
Olive Waller Zinkhan & Waller LLP>>> On March-31-13 at 9:16 AM, in message <[email protected]>, laurabuckley<[email protected]> wrote:
Further to what I said above.... In ConsoleOne click on Tools |
GroupWise system operations | LDAP Servers | Select the LDAP
server/servers that you are using and click on Edit - in there you will
see if SSL is enabled and what certificate you are using.
Cheers,
Laura Buckley
Technical Consultant
IT Dynamics, South Africa
http://www.itdynamics.co.za
laurabuckley's Profile: http://forums.novell.com/member.php?userid=122
View this thread: http://forums.novell.com/showthread.php?t=465411

SSL VPN Login failure issue

Hello,
I am having an issue with some users trying to login to our SSL VPN (Anyconnect) via ASA5505 8.2(1). Authentication is done via AD. From the same computer, the client finds the DNS name and unlocks the login username and password. When I enter a username and password and click connect, it is instantly rejected with login failure with the following event log:
Function: ConnectMgr::setPromptAttributes
File: .\ConnectMgr.cpp
Line: 2657
Invoked Function: setPromptAttributes
Return Code: -33554423 (0xFE000009)
Description: GLOBAL_ERROR_UNEXPECTED
Error text:
Login failed.
If I change the user account to another user (from the same PC), login works perfectly fine - this is only happening with 3 or 4 users - I have compared the user accounts of a failing account and a successful account and they are identical in AD.
This has been driving me crazy - as a work around for the failing users, I just created a temporary account which works perfectly fine. The request doesn't even seem to hit the ASA (there is nothing in the logs that show a failed attempt). Still troubleshooting and looking at certificate's at this point. Any help/suggestions would be greatly appreciated!! Thanks.
Regards.
After a little more testing, seems somehow related to users being in to many groups in AD.
Message was edited by: Rich Viola

Hello,
If the website is unavailable or in this case, the website is missing several characters(charts, canvas, etc or some other objects), usually could be an issue with the rewrite engine.
Solution (workaround):
You may use smart tunnel for this website, so the rewrite engine will not override any content, and it will display the website as it should.
You can implement it as follow:
Add a Bookmark
Bookmark for the service and clicking the Enable Smart Tunnel option in the Add or Edit Bookmark dialog box.
For further information you can find it here:
http://www.cisco.com/c/en/us/td/docs/security/asa/asa83/configuration/guide/config/webvpn.html#wp1272236
Let me know how tit works out!
Please don't forget to rate and mark as correct the helpful Post!
David Castro,
Regards,

I upgraded to mountain lion a week ago and now on startup of my macbook pro, microsoft excel and word start up automatically and then crash? very strange can anyone please help? I have checked the login items under users and groups and there is nothing.

I upgraded to mountain lion a week ago and now on startup of my macbook pro, microsoft excel and word start up automatically and then crash? very strange can anyone please help? I have checked the login items under users and groups and there is nothing.

Are you using the Office for Mac 2011 version, as you need to do? The Office for Mac 2004 is Not at all compatible with Mountain Lion, and the 2008 version has been noted to have some problems running with ML.
Hope this helps

How to bring Login.jsp under a html frame ?

hi all.
I have customized the Login.jsp and actually have lot of static content to be displayed in our proposed entry page.
I decided to use Html frames - something like the one below.
When i point on the frame to the Login.jsp ( i referred it as 'amserver/UI/Login') --> it loads all frames then redirects the page to the /amserevr/UI/Login -> the Login.jsp now occupies the entire screen and i c none of the html frames..
any idea how to bring in the portal Login.jsp under a html frame ?
Thanks
Vee
<html>
<frameset noresize="noresize" frameborder=0 rows="25%,70%,5%">
<frame frameborder=0 noresize="noresize" src="/amserver/UI/Login" name="banner_frame" scrolling=no>
<frameset frameborder=0 noresize="noresize" cols="30%,70%">
<frame frameborder=0 src="./images/menus.gif" name="menu_frame" scrolling=no>
<frame frameborder=0 src="./images/content.gif" name="content_frame" scrolling=no>
</frameset>
<frame frameborder=0 src="./images/copyright.gif" name="copyright" scrolling=no>
</frameset>
</html>

is it possible to write jsp code or javascript code inside this Login.jsp ?
I got a bunch of content - menu driven to displayed additional to the identity server login module.
veera

SQL Server 2012 syspolicy_purge_history job causes cross-instance login failures w. EraseSystemHealthPhantomRecords

I have unique service accounts set up for multiple instances on the same SQL Server 2012.
When step 3 of the inbuilt syspolicy_purge_history job(Erase Phantom System Health Records) runs, it appears to attempt to run against every instance on the server despite being passed the instance path!
The SQLServer's powershell script call:
if ('$(ESCAPE_SQUOTE(INST))' -eq 'MSSQLSERVER') {$a = '\DEFAULT'} ELSE {$a = ''};
(Get-Item SQLSERVER:\SQLPolicy\$(ESCAPE_NONE(SRVR))$a).EraseSystemHealthPhantomRecords()
so with instances SERVER\X this runs as...
(Get-Item SQLSERVER:\SQLPolicy\SERVER\X).EraseSystemHealthPhantomRecords()
SERVER\X's job will run and I will see login failures in the error logs of SERVER\Y and SERVER\Z for the service account set up for instance X.
It seems Microsoft's only 'accepted solution' to this problem is for me to compromise my security by escalating the access of these service accounts?
Has anyone else run into and corrected this failure?

Hi Atombath,
When you install multiple instances on one Server, and the SQL Server’s powershell scripts are the same in inbuilt syspolicy_purge_history job steps. However, when you start PowerShell by right clicking
syspolicy_purge_history job, you will find it will point to their own instance. I do a test in my SQL Server 2012,
it will not across instance to collect the error logs. So I recommend you use its original powershell scripts for the syspolicy_purge_history job.
Sometimes, if you run the syspolicy_purge_history job on a clustered instance, the syspolicy_purge_history SQL Server Agent job may fail due to using the computer node name instead of the virtual server name. For more information, see:
http://support.microsoft.com/kb/955726/en-us
In addition, you can use different service account for your multiple SQL Server instances on the same Server. And make sure the accounts that you created get added to the sysadmin fixed server role, the accounts are also set in the three Agent roles (SqlAgentUserRole,
SqlAgentReaderRole, and SqlAgentOperatorRole).
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support

Historical Reporting Client Login Failure - UCCX 7.0(1)

We're experiencing intermittent login failures with the Historical Reporting Client, extract from the log file below:
1: 28/04/2010 11:58:25 %CHC-LOG_SUBFAC-3-UNK: Error # 35761 ,Description= Request timed out ,LastDllError= 0
2: 28/04/2010 11:58:25 %CHC-LOG_SUBFAC-3-UNK:Authentication response was NOT received from (http://<ip address>/histRepWebSrvrComp/histRepClientsServlet)
3: 28/04/2010 11:58:25 %CHC-LOG_SUBFAC-3-UNK:Login Error | Invalid server name or IP address. Check the server name or IP address and login again.
4: 28/04/2010 11:58:30 %CHC-LOG_SUBFAC-3-UNK:Authentication response was NOT received from (http://ip address/histRepWebSrvrComp/histRepClientsServlet)
5: 28/04/2010 11:58:30 %CHC-LOG_SUBFAC-3-UNK:Login Error | Invalid server name or IP address. Check the server name or IP address and login again.
6: 28/04/2010 11:58:30 %CHC-LOG_SUBFAC-3-UNK:Connection to web server failed due to: 12017 : Operation cancelled
7: 28/04/2010 11:59:05 %CHC-LOG_SUBFAC-3-UNK:Connection to web server failed due to: 12017 : Operation cancelled
8: 28/04/2010 11:59:05 %CHC-LOG_SUBFAC-3-UNK:Failed to load authentication response due to empty XML buffer from authentication servlet)
9: 28/04/2010 11:59:05 %CHC-LOG_SUBFAC-3-UNK:Login Error | Invalid server name or IP address. Check the server name or IP address and login again.
Does anyone know why this may be happening as it's driving the customer mad. User can usually login after a few attempts.
The authentication timeout is set to 15 seconds, surely this is more than enough time or should we increase the timer?
Any advice much appreciated.

Hi Robert
Thanks for the response and all very good suggestions which should help Chris narrow down his particular issue.
It's been about a year since we last looked at this so I'd quite forgotten most of the diagnostics we'd done however we did go through most of the same diagnostics ourselves but the resolution was hampered due to the fact we support the telephony/WAN and another third party supports the desktops and LAN infrastructure so after months of to and fro with the customer and their third party (and many, many man hours) we eventually left the risk with the customer and investigations never progressed any further.
1.) Upgrade to UCCX 7.0SR5. This is a very stable release of code with few open bugs or caveats against it.
            - Agreed. We also ran into other bugs which required an upgrade.
2.) Verify that the active NIC is indeed at the top of the bindings order. Just having it active isn't enough, there needs to be the further test of moving to the top of the bindings order.
            - We did check this.
3.) Verify that the hosts file on the UCCX server(s) has the external IP and hostname of the server in it.
            - Did this too.
4.) Check the remote locations to verify that the network is correctly configured, there are no line errors on the WAN circuits, no misconfiguration on the switch/router ports and that QOS is in place across the network.
            - This part of the investigation stalled due to another 3rd party supporting the onsite network however no WAN issues were found.
5.) Try to take a test system that is on the same network as the one having HRC errors. See if it's seeing the issues. If not, progressively move out to other offices/locations until you replicate the issue and then see what has changed. Something there should hopefully point to the cause of the error.
            - We did this also, using my laptop I connected from various locations and even when using the same network connection as the end user had no problems, we did note the successful connection attempts used a slightly different network route/DNS/WINS however again got nowhere with the third party supporting this aspect of the network.
6.) Finally, you may want to consider creating external data warehouse servers so that your UCCX servers aren't serving up the HRC data.
            - Not an option for this customer, again this aspect of the service is a different third party on their own network and customer not willing to pay for additional servers for the telephony estate to provide this functionality when they only have a few CCX users.
Regards
June

Common reason for Mirage Server Failure in Clustered Environment and how clients will be switched to other server in a cluster

Hi,
Can Anybody share me the information regarding Common reason for Mirage Server Failure in Clustered Environment.
And how clients will be switched to other server in a cluster to continue their operations from the failed server.
Regards,
Bathesha C

Hello,
if you have more than one mirage server configured with Load balancing (LB or MSFTNLB) the client would disconnect from the faulting server and then reconnect to an other server to progress with the action as before.
All Mirage server are stateless and share the same SIS (single instance store) so any server can update or create CVD file set for an client.
Hope that helps.

How to see / limit consecutive login failures?

Hi, our server is running 10.4.7 server.
In terms of hardening the machine against attacks, is there be default a limit to the number of failed logins that occur before an account is locked in some way?
If not, is there a way to turn ON that security feaure?
Where are login failures logged?
Thanks!

Yes, you can set a limit to login failures. The following assumes that you are using Open Directory and that your users are authenticating against the server's Open Directory database.
For global policies =
Open Server Admin > for the proper server select Open Directory > select Policy > select Passwords > adjust settings
For a single user = this will override global policies listed above
Open Workgroup Manager > browse users > select the account you wish to manage > Select the Advanced user settings > select Options > dialog box gives ability to limit access in a variety of ways.
Authentication is logged =
Server Admin > Open Directory > Logs > Password service server log

SP15 in Java engine failed, "Login Failure: all modules ignored"

Hi
During the installation of sp15 (with JSPM) failed, the sdm log shows:
ERROR: Cannot connect to Host: [hostname] with user name: [J2EE_ADMIN]
My instance was down so I started but now there is an error, when I try to log on to User management it give me the error: "Login Failure: all modules ignored".
I checked the logs for the server and found the following:
#1.5^H#0000000000000067000000250000596D00045A79FA4B224F#1225379843613#com.sap.engine.services.security.resource.ResourceHandl
eImpl#sap.com/com.sap.security.core.admin#com.sap.engine.services.security.resource.ResourceHandleImpl#J2EE_GUEST#0##n/a##da7
065c0a69511ddb438000000000000#SAPEngine_Application_Thread[impl:3]_15##0#0#Error#1#/System/Security/Audit/J2EE#Java###ACCESS.
ERROR: Authorization check for caller assignment to J2EE resource [ : : : ].#4#SAP-J2EE-Engine#session-pool#ge
t_session_pool#ALL#
#1.5^H#0000000000000067000000260000596D00045A79FA4B32AC#1225379843613#com.sap.engine.services.security.authentication.loginco
ntext#sap.com/com.sap.security.core.admin#com.sap.engine.services.security.authentication.logincontext#J2EE_GUEST#0##n/a##da7
065c0a69511ddb438000000000000#SAPEngine_Application_Thread[impl:3]_15##0#0#Error##Java###Caller not authorized.
[EXCEPTION]
#1#com.sap.engine.services.security.exceptions.BaseSecurityException: Caller not authorized.
        at com.sap.engine.services.security.resource.ResourceHandleImpl.checkPermission(ResourceHandleImpl.java:627)
        at com.sap.engine.services.security.resource.ResourceHandleImpl.checkPermission(ResourceHandleImpl.java:513)
        at com.sap.engine.services.security.resource.ResourceContextImpl.checkPermission(ResourceContextImpl.java:45)
        at com.sap.engine.services.security.restriction.Restrictions.checkPermission(Restrictions.java:119)
        at com.sap.engine.services.security.server.AuthenticationContextImpl.getSessionPool(AuthenticationContextImpl.java:39
5)
        at com.sap.engine.services.security.server.AuthenticationContextImpl.getLoginContextFactory(AuthenticationContextImpl
.java:740)
        at com.sap.engine.services.security.server.AuthenticationContextImpl.getLoginContext(AuthenticationContextImpl.java:2
54)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
        at java.lang.reflect.Method.invoke(Method.java:324)
        at com.sap.engine.system.SystemLoginModule.initialize(SystemLoginModule.java:72)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
        at java.lang.reflect.Method.invoke(Method.java:324)
        at javax.security.auth.login.LoginContext.invoke(LoginContext.java:662)
        at javax.security.auth.login.LoginContext.access$000(LoginContext.java:129)
        at javax.security.auth.login.LoginContext$4.run(LoginContext.java:610)
        at java.security.AccessController.doPrivileged(Native Method)
        at javax.security.auth.login.LoginContext.invokeModule(LoginContext.java:607)
        at javax.security.auth.login.LoginContext.login(LoginContext.java:534)
        at com.sap.security.core.logon.imp.SAPJ2EEAuthenticator.getLoggedInUser(SAPJ2EEAuthenticator.java:146)
        at com.sap.security.core.logon.imp.SAPJ2EEAuthenticator.forceLoggedInUser(SAPJ2EEAuthenticator.java:231)
        at com.sap.security.core.admin.ServletAccessToLogic.getActiveUser(ServletAccessToLogic.java:141)
        at com.sap.security.core.admin.UserAdminLogic.executeRequest(UserAdminLogic.java:438)
        at com.sap.security.core.admin.UserAdminServlet.doPost(UserAdminServlet.java:26)
        at com.sap.security.core.admin.UserAdminServlet.doGet(UserAdminServlet.java:19)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
        at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
        at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
        at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
        at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
        at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
        at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
        at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
        at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
        at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessio
nMessageListener.java:33)
        at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
        at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
        at java.security.AccessController.doPrivileged(Native Method)
        at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
        at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
I found the SAP Note 971249 but Iu2019m not sure it applies and even I can log on into Visual administrator.
Log for the Visual Administrator
<!LOGHEADER[START]/>
<!HELP[Manual modification of the header may cause parsing problem!]/>
<!LOGGINGVERSION[1.5.3.7185 - 630]/>
<!NAME[/usr/sap/SID/DVEBMGS00/j2ee/admin/log/./traces/visual_administration.trc]/>
<!PATTERN[visual_administration.trc]/>
<!FORMATTER[com.sap.tc.logging.ListFormatter]/>
<!ENCODING[UTF8]/>
<!FILESET[0, 5, 10000000]/>
<!PREVIOUSFILE[visual_administration.4.trc]/>
<!NEXTFILE[visual_administration.1.trc]/>
<!LOGHEADER[END]/>
#1.5^H#C000AC11873E00000000000100CEC78D00045A541BE7A040#1225217198758#com.sap.engine.services.adminadapter.gui.tasks.LoginTas
k##com.sap.engine.services.adminadapter.gui.tasks.LoginTask#######Thread[Thread-1,5,main]##0#0#Error#1#/System/Server/VisualA
dministrationTool#Java###Error while trying to login to host: null
[EXCEPTION]
#1#java.lang.NullPointerException
        at com.sap.engine.services.security.remoteimpl.login.RemoteLoginContextHelperImpl.login(RemoteLoginContextHelperImpl.
java:72)
        at com.sap.engine.services.security.remoteimpl.login.RemoteLoginContextHelperImplp4_Skel.dispatch(RemoteLoginContextH
elperImplp4_Skel.java:64)
        at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:319)
        at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:200)
        at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:136)
        at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessio
nMessageListener.java:33)
        at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
        at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
        at java.security.AccessController.doPrivileged(Native Method)
        at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
        at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
Thank you very much for your help.
Best Regards

hi
we had the same issue some time back when we upgraded to SP15, we opened a OSS message and SAP had to come and fix the issue.
It was some inconsistencies in -Config DB settings and they made quite a few changes in security/configurations/ticket(config tool)
also
one Java parameter was wrong(config tool - server config) :
-Djava.security.policy=/java.policy it should be -
> Djava.security.policy=./java.policy (The DOT was missing)
thank you
Jonu Joy

Install Oracle8 client in silent mode under windows environment

I would like to know how can i install Oracle8 client in silent mode under windows
environment.
I would appreciate a prompt reply on this

I would like to know how can i install Oracle8 client in silent mode under windows
environment.
I would appreciate a prompt reply on this

OS X server (10.10.1) Imap Internal login failure

I have a problem with my main server on a OS X server 10.10.1 (Mac mini)
Clients cannot log in to the IMAP side of an account on the server.
So when using the mail client Connection Doctor the SMTP is successful and the IMAP portion not.
This happens with both accounts Local as with the accounts in the Open Directory service
The log of the Open Directory service indicates that ist was an successful login.
The IMAP log shows.
error Jan 17 18:44:04 imap-login: Info: Internal login failure (pid=93306 id=27) (internal failure, 1 successful auths): user=<test>, method=PLAIN, rip=10.0.0.101, lip=10.0.0.101, mpid=93310, TLS
The user test is local users.
The server was up-grade from Maverick to Yosemite a few months ago.
It runs 10.10.1 and Server 4.0.3
Any suggestion?
Thanks and regards,
Jacob

The reason that I wanted to use WGM was because it allows you to configure a maximum backup volume size per machine. If you just configure through TM, a single machine could fill the entire volume with backups.
I know that there's a way to use hdiutil to max the sparsebundle size that is created when you don't use WGM, but lets face it folks - if the option is there, then apple should support it!

[Q] Login failure under CDE environment

Similar Messages

Maybe you are looking for