Q on the various ports used by portal .... can anyone reply this ..?
this is w r t the Oracle 9iAS Release 2 (9.0.2) installation guide for Sun SPARC Solaris, found at following -
http://portalcenter.oracle.com/pls/ops/docs/FOLDER/COMMUNITY/DOCTEAM/DOCINSTCONF/INSTALL.PDF
Goto Appendix F - Default Port Numbers and Port Ranges
Section F.1 - 9iAS Port Usage (sorted by component)
Heading - Oracle HTTP Server the port numbers are mentioned as following -
Component Default Port Port Range
Oracle HTTP Server
Oracle HTTP Server - non SSL 7777 7777-7877
Oracle HTTP Server - SSL 4443 4443-4543
Oracle HTTP Server Listen - non SSL 7777 7777-7877
* Oracle HTTP Server Listen - non SSL 7778 7777-7877
Oracle 9iAS web cache is installed and
configured
Oracle HTTP Server - SSL 4443 4443-4543
** Oracle HTTP Server Listen - SSL 4444 4443-4543
Oracle 9iAS web cache is installed and
configured
******** now check the settings for Oracle 9iAS Web Cache in the same document -
Component Default Port Port Range
Oracle9iAS Web Cache
+ Oracle9iAS Web Cache HTTP Listen-non-SSL 7777 7777-7877
++ Oracle9iAS Web Cache HTTP Listen-SSL 4443 4443-4543
question :- as seen from the above, the same document has 2 contradictory port numbers. in the settings for Oracle HTTP Server it says ..
1. port 7778 is used by Oracle HTTP Server Listen - non SSL Oracle 9iAS web cache marked with an (*) in the first section
2. port 4444 is used by Oracle HTTP Server Listen - SSL Oracle 9iAS web cache marked with (**) in the first section
now if you see the settings for Oracle 9iAS Web Cache it says ..
1. port 7777 is used by Oracle 9iAS Web Cache HTTP Listen-non-SSL marked with an (+) in second section above
2. port 4443 is used by Oracle 9iAS Web Cache HTTP Listen-SSL marked with an (++) in second section above
both the sections contradict eachother .... can someone pls verify which ports are used for what ....?
also ... say, if the Webcache uses port 7778, does that mean the portal URL would be http://host.domain:7778/pls/portal ?
can someone explain the concept of the webcache and how it is accessed ...
thanx
I tried to add a perfmon monitor on my local system.
Monitored system
HostName: localhost
username: windows user
password: windows password
Domain: windows domain name
Data Collector
Name: OLT server
Hostname: localhost
Port: 8088
Username: oats
Password: *****
I got this error.
An unhandled exception has occurred in the Application Service. Please retry the action you were performing. If you still experience the same problem, please try the following:
Error while calling discovery: Server returned error in response to request 1065: Discovery for request null failed: code=dis20: (message id=console.discoveryError): (message id=responseServerError)
Caused by: Discovery for request null failed: code=dis20: (message id=console.discoveryError)
Caused by: Server threw an exception in response to request 1066: (message id=responseServerException)
Caused by: Configuration error in workstation oats-am://LTRBHOJ.keste.com:8088/oats: (message id=Configuration error in workstation oats-am://LTRBHOJ.keste.com:8088/oats)
Caused by: Error starting data collector on oats-am://LTRBHOJ.keste.com:8088:{1}: (message id=ds.dcStartError)
Caused by: Remote host closed connection during handshake
Caused by: SSL peer shut down incorrectly
Did anyone face this issue ?
Similar Messages
-
What are the various ports used by OLT?
Having recently had 'fun' getting a load agent working in our secure LAN, I was wondering if someone could clarify what the various ports are used by/for?
I am aware of the following:
9001 - Actually mentioned when setting up a load agent
1099 - Mentioned when setting up a data collector
1098 - ? necessary for load agent (I'd hazard a guess at this also being Data Collector related)
4444 - ? necessary for load agent
7071 - ? necessary for load agent
I have also had the following ports mentioned to me while looking at similar issues (but they did not need opening in my recent excercise):
7073
8083
8088
I have also suggested this information be added to the knowledgebase article (Doc ID: 787226.1) as they may need opening on any firewalls.I tried to add a perfmon monitor on my local system.
Monitored system
HostName: localhost
username: windows user
password: windows password
Domain: windows domain name
Data Collector
Name: OLT server
Hostname: localhost
Port: 8088
Username: oats
Password: *****
I got this error.
An unhandled exception has occurred in the Application Service. Please retry the action you were performing. If you still experience the same problem, please try the following:
Error while calling discovery: Server returned error in response to request 1065: Discovery for request null failed: code=dis20: (message id=console.discoveryError): (message id=responseServerError)
Caused by: Discovery for request null failed: code=dis20: (message id=console.discoveryError)
Caused by: Server threw an exception in response to request 1066: (message id=responseServerException)
Caused by: Configuration error in workstation oats-am://LTRBHOJ.keste.com:8088/oats: (message id=Configuration error in workstation oats-am://LTRBHOJ.keste.com:8088/oats)
Caused by: Error starting data collector on oats-am://LTRBHOJ.keste.com:8088:{1}: (message id=ds.dcStartError)
Caused by: Remote host closed connection during handshake
Caused by: SSL peer shut down incorrectly
Did anyone face this issue ? -
Recently someone has been texting people on my contacts list even when no one has touched my phone i can see the messages posted to my friends family etc. Dose anyone know how to fix this or what not?
Do you of any apps or anything to check the past location of where my iphone has been used or logged on to?
-
After ejecting a disk plugged into the USB port using Finder, I am now getting "The disk was not properly ejected" message. This didn't used to happen. How can this be corrected?
When you right (control) click on the disk and click eject "disk name", do you pull it immeadiatly or wait a few seconds for it to unmount? Try waiting and see if you get the same message. If you do, when the disk is connected go to applications/utilities/disk utility, after opening DU, select the volume in question from the left side bar and try a permissions repair, you may also run verify disk and see if it comes up with any errors (they will be in red)
-
Special QoS config on the witch port used for unity ?
Hi, I'm actually tunning my qos config and I want to know if you apply a special Qos Config on the sowth port used by unity.
ThanksThe following document talks about QoS config for Unity Express. You can use the same appropriately for Unity too.
http://www.cisco.com/en/US/products/sw/voicesw/ps4625/products_installation_guide_chapter09186a0080527151.html -
How do I get the Tomcat port using Servlet.
I am running Apache + Tomcat. All request are going though Apache. How do I get the Tomcat port using Servlet.
See:
ServletRequest.getServerPort()This will give the port upon which the request was recieved . . .which I blelieve is what you are looking for. -
I just upgraded to 10.10. On the mail program, one of my accounts is having an issue sending email. I am getting the following error message:
The certificate for this server is invalid.
Select a different outgoing mail server from the list below or click Try Later to leave the message in your Outbox until it can be sent.
But on another machine running Mavericks, I can still continue to send email. The same is try from my iPhone 5S.
On that machine running Mavericks the SMTP is configured as SSL and for "Usual Ports" (25, 465, 587) but THIS OPTION IS MISSING ON THE NEW VERSION. On the new version I have tried configuring the port to 25 and then 465 and 587 with no success. I have used the Network Utility to see if my provider is blocking me -- it is not. I have no third-party software on this machine (anti virus). I can receive email fine. On the new Yosemitie Mail there are new checkbox options of Automatically check my settings and Allow unsecure connections. I tried to uncheck SSL for SMTP but then it says it cannot send securely my passowrd and i need to check the option "Allow to send unsecurely". I did that but the same error message keeps appearing. So I have tried nearly everything I have been able to, all to no avail. Please can somebody help?Thanks for your reply. Yes, it is a POP account. Incoming mail is fine. My port for incoming is also 110. But the outgoing port should be 587 (or 24, 465 and 587 as on Mavericks' "Usual Ports" option). I am using the same configuration across three different devices and only the machine running Yosemite is having issues. I notice in the new version of Mail there is no longer the "Usual Ports" option. I am not sure this is the culprit or not. But the fact is no matter how I configure it, it will not send mail for these particular servers. I have multiple clients and only one is affected, meaning I can send email from other email addresses (different hosting contracts) on Yosemite but on this one particular one I cannot.
-
Hi, I have an iPhone 4 which rings people when it is locked, whether or not in my pocket. I always lock it when not using it. Can anyone help? It is calling random numbers, not the last person or anyone even recently called on my recents list. Thanks
Pay no attention to iinami, the amount of replies to people saying their handsets must have been jailbroken everytime iTunes throws out an error is tremendous. (Clearly you don't need to have any real knowledge to get to level 3 on these forums, let's hope apple's geniuses know a lot more than some of their customers.)
http://support.apple.com/kb/TS3694
Solution below.
Error 9
This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if the device is manually disconnected during the restore process. This issue can be resolved by performing USB troubleshooting, using a different USB dock-connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software. -
When I create a New Folder (on the desktop or in Finder), the system uses the Generic Document Icon instead of the Generic Folder Icon. How can I change this back?
All of a sudden I noticed that most of the folders on my computer were no longer using the folder icon, but the generic document icon. I had to manually change back the icon being used by opening Get Info for each folder and copying and pasting the generic folder icon from some folders that remained unchanged. Now whenever I create a New Folder (right click -> "New Folder"), the icon that shows up is the generic document icon (white page with top right corner turned down). And I have to manually change it so it shows up as a folder in Finder or on my desktop. I don't know why or how this switch happened. All of the folders now on my computer look ok, but I need to change the default so when I create a New Folder it uses the correct icon.
I have also Forced Relaunch of my Finder and rebooted the system. I downloaded Candybar but am not sure what will fix anything, so I haven't proceeded.
Anyone know how I can do this? Thanks.Anyone?
-
Hello i have one IPhone 4S and I use 3G net in my mobile sometime I have problem with temperature in my phone at the SIM card or battery how can I fix this problem. By update or version of 6.1.3
Could it be because the SIM card got damaged while I cut it to fit the IPhone?
Very likely. Hard to believe the carrier in Mexico doesn't have a micro-SIM card available.
Or somehow the Chinese carrier found out and locked it?
No, which is not possible.
What can I do? Get a new SIM and see if it works again?
Get a micro-SIM from the carrier in Mexico that you don't have to manually cut down. If that carrier doesn't provide one, switch to another carrier that is not so low-budget. -
i plugged in my ipod and now i get the error message: Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled" - i have a MAcBook pro and now my USB ports do not work - can anyone help me ???
Sometimes you have to reset the SMC two or three times for it to work, don't know why. I've seen that error message before and 100% of the time it was fixed with an SMC reset. I suppose it's possible that your keyboard or mouse IS drawing too much power, do you have access to another you could try?
-
Hello, I have an iPod touch and it don't has light or brightness. I can see the icons and use it but can get it work properly. I went to settings and the brightness is adjusted tu full level. Any idea?
Try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc. -
I have 2 games Words with Friends and Cityville that receives a Pop-up message form iTunes... "Connect to iTunes to use Push Notifications" and will not allow me to exit out of the app or play. How can I get this message to STOP?
Yes - I connected my phone to my computer / Itunes and went into the apps section, but from there I have no idea how to manage the push notifications. I even tryied going into itunes that is installed on my phone. I still cannot find anyplace to manage these popups. I have also gone into settings - notifiations - and tried turning all notifications for these apps all off but that didnt work either. Any guidance is MUCH appreciated - Im not sure where to go from here.
-
I bought my iphone 4 in the UK and I am trying to use a sim in the UAE and it doesn't work. It says that the sim is not valid, how can I get this unlocked?
You are saying the phone is locked, but then you are saying there is no provider. The two situations cannot peacefully coexist. Contact Apple and they can tell you if the phone is locked and if locked to which provider the phone is locked. People on this board are not Apple employees and cannot get you that information.
-
I have a new I Pad air and I am trying to use it with a projector and a whiteboard, unfortunately the two are not connecting. Can anyone give me reasons why this might be happening.
You can connect via a cable or wireless using an Apple TV.
http://ipad.about.com/od/iPad_Guide/a/How-To-Connect-Your-Ipad-To-Your-Tv.htm
Connect an iPad to a Television or Projector
http://www.everymac.com/systems/apple/ipad/ipad-faq/how-to-connect-ipad-to-tv-te levision-projector.html
Connecting iPad iPhone or iPod to TV or Projector
http://www.disabled-world.com/assistivedevices/computer/ipad-tv.php
iPad Accessories: Connections for a TV or Projector
http://www.dummies.com/how-to/content/ipad-accessories-connections-for-a-tv-or-p rojector.html
You may be interested in AirPlay on the Apple TV:
http://www.apple.com/airplay/
http://www.apple.com/airplay/
Alternately, there are Apple Digital AV Adapters for hardwired connections:
http://support.apple.com/kb/ht4108
http://support.apple.com/kb/ht4108
Cheers, Tom
Maybe you are looking for
-
LR5.7.1 no longer sees NEF files?
Last week, I upgraded LR to 5.7.1, since then LR will not, I repeat will not import NEF files! It imported NEF files prior to that upgrade with no problems. LR says the NEF files are "read only". Which isn't true because I imported the same NEF f
-
I want to buy an iMac as a Christmas gift this year and wondered if it may be possible to specifically order one with Snow Leopard? By then I imagine all machines available for sale are likely to have Lion pre-loaded, hence my question. If I could bu
-
Calling an exe using web.show_document
hi all, I want to call acrobat.exe using web.show_document. The exe is in my local system. Client_host('C:\Program Files\Adobe\Acrobat 7.0\Reader\AcroRd32.exe c:\sql.pdf'); I want to replace this with web.show_document How can i achieve this?? thx in
-
What application do I use to open compressed zip files?
Hi! I am wondering what application I use to open a compressed zip file? Thanks.
-
Offline/Online Edit for xdcam footage
I am using Sony F3 camera and Sony FS100 footage with final cut 7. Both have different format, One use XDCAM and other use AVCHD. I didn't have any problem transcoding F3 footage in its native form and FS100 footage in Prores LT for offline edit. I w