[Q]Problem with Bluetooth connection between Xiaomi Mi Band and Lenovo P780.

Hello,
I bought Mi Band to my Lenovo P780 and I have connection problem. I have paired both devices and everything works well but 10-20 times a day connection is lost. And after I open Mi Fit, app try to connect with phone and do a sync but it can't (long time: "Connecting... Getting info from your band" and after: "Couldn't connect, pull down to retry."). Only after turning Bluetooth off/on app can connect to phone and do syncing. This is very annoying. Always after night the connection between Mi Band and phone is broken. What can I do about this problem? I need have a real-time notifications on Mi Band so I need have stable connection between phone and band all the time.
I have Lenovo P780 on 4.4.3 and Xiaomi Mi Band on firmware 1.0.9.0 + Tweaked Mi Fit with notify 1.2.922. But I tried also previous versions of Mi Fit - always the same result. And I tried on Nexus5 rom final, official Lenovo KK rom vibe, Alice Project 7.5 and Alice Project 8.0 roms - always the same result.
I tried on 2 other phones and bracelete isn’t broken. Everything is ok – stable connection.
Problem is in Lenovo. What should I do?
Thank you very much.

I have a better experience as my microsoft sculpt touch mouse now works fine - before it was always disconnecting.
Otherwise I have noticed the following with this new update:
- you have to update the bios version too to maximise the improvement
- regarding the special settings of my card, and after lots of test, my best setting is :
Antenna diversity type : 3 (before upgrade of bios, i had no wifi with 3 as value) - it seems it gaves me a slight enhancement
Bandwith: 20_40
Selective suspend : enabled (disabled doesn't change anything)
Selective suspend timeout: 30 (more doesn't change)
Wifi-config: wifi (that's the real trick, if set to Performance, the drop in performance is impressive)
in the meanwhile i was typing that i experienced a slight bluetooth connexion drop... less than before, but it's not totally fixed.
i think alas that the choice of the wifi card is just very bad. I ordered back in 2008 a profesional Dell laptop with a wifi n 2x2 450Mbits minipci. I expected that in 2012-13, an ultrabook without lan connexion and a ssd would at least provide a 2x2 (dual band) 300 Mbits wifi n... but here it's just the cheapest wifi n single band + bluetooth bundle which has been put. The worst is that's an economy of maybe 20€ which is ridiculous on a >1000€ machine.
Once the guarantee has passed, i think i'll upgrade my machine with a decent minipci wifi card and that's all. At least it seems that the dismounting of the Yoga 13 is quite well documented.

Similar Messages

I Have A Problem with Bluetooth connection between my I-Phone and Bluetooth in my auto

I have a problem with bluetooth conection between my auto (2013 Buick) And I-phone 5. I can call out but am unable to recieve incomming calls.When I attempt to answer ,Everthing disconnects and the phone call goes to mail automatically.

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Problem with bluetooth connection between iPhone 5s iOS 8.1.2 and MacBook Pro (Mid 2012) Yosemite 10.10.1

After the upgrade to iOS 8.1.2 in iPhone 5s and OS X 10.1.1 Yosemite (MacBook Pro Mid 2012) can not connect my iPhone 5s to the MacBook, the iPhone tells me: "The MacBook is incompatible" or the message "Connection Error, Make sure the Mac is turned on and is within range" even the iPhone being close to the Mac. Otherwise with the updated iPad 2 (iOS 8.1.2) is connected via bluetooth to the MacBook without any problems, Even the iPad 2 does not detect the iPhone bluetooth.
Help me please
Message was edited by: aguil77uvr

An iPhone will not pair via Bluetooth to a computer (Mac or Windows) except for personal hotspot and then only if your cellular plan supports it. https://discussions.apple.com/docs/DOC-7722
If you are attempting to use Handoff/Continuity, that does involve Bluetooth but the devices are NOT paired; Bluetooth just needs to be on and the devices in range of each other. The following may help with Handoff/Continuity issues: http://support.apple.com/kb/TS5458

I have problem with data transfer between Windows Server 2012RT and Windows7 (no more than 14kbps) while between Windows Sever 2012RT and Windows8.1 speed is ok.

I have problem with data transfer between Windows Server 2012RT and Windows7 (no more than 14kbps) while between Windows Sever 2012RT and Windows8.1 speed is ok.

Hi,
Regarding the issue here, please take a look at the below links to see if they could help:
Slow data transfer speed in Windows 7 or in Windows Server 2008 R2
And a blog here:
Windows Server 2012 slow network/SMB/CIFS problem
Hope this may help
Best regards
Michael
If you have any feedback on our support, please click
here.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

5800 + bh-103 problem with bluetooth connection

Hello,
I have nokia 5800 xpressmusic with Version 30.0.011.C03.01 that was issued for the phone in 29/06/09.
I also bought bh-103 bluetooth stereo handsfree and to my pity i realized that from time to time the bluetooth connection between my 5800 and my bh-103 is faulty. The phone shows that it is connected with this bluetooth but you cannot dial nethier from phone nor from the bluetooth bh-103. Even if i power off the bh-103 the phones stil shows the bluetooth connection to be active(the icon of the headphone dissapears). If i power on the bh-103 even if the icon of the headphone in the display of the 5800 dissapears it can't be paired. What i mean is that the phone shows both the bluetooth connection to be opened plus the icon of the headset in the display but as i mentioned before you can't voice dial by pressing the big center button of the bh-103, neither you can dial from the phone itself.
Has anyone faced similar problems?
P.S. this kind of problems i am facing since i bought the phone with the already installed version of the firmware

First, restore factory settings in your 5800 phone. Next reset the BH-103 by pressing and holding down the multifunction key for more than 8 seconds.
Now, turn it on (press and hold down the multifunction key for approx. 4sec)
Turn on the bluetooth in your 5800 (you must do it within a second or two after you turn on the headset)
Wait for the headset to detect and pair with the phone. The pass code is 0000. In your phone, set the headset as authorized, so that it can connect to your phone automatically.
If the problem persists, I would advise you to check for the same behaviour with another bluetooth headset. Do you have problems while transferring files, connecting to the PC thru PC Suite, etc using Bluetooth?
Cheers,
DeepestBlue
5800 XpressMusic (Rock Stable) | N73 Music Edition (Never Say Die) | 1108 (Old and faithful)
If you find any post useful, click on the Green "Kudos" Button on the left to say Thank You...

Hi i am having problems with bluetooth connection! My phone wont pair with other devices! its an iphone 4s

Hi all. I hope someone can help me with bluetooth connectivity? My phone wont pair up with other devices including my husbands iphone! He has the same problem!

the problem is what bluetooth profiles you are expecting bluetooth is a long range of services and not all devices support all profiles
here is a list of what ios devices support in terms of bluetooth profiles
http://support.apple.com/kb/ht3647

Problems with Dinamic Link between Premiere pro CC and After Effects CC

I'm having serious problems with dinamic link between premiere pro and after effects, really serious problems that have 2 big projects in trouble (a documentary and a video clip) and I had to redo all the work pipeline to the consumer.
The documentary for a spanish TV was made on CC 2014 and a video clip was made on CC. Both of them with a lot of after effects composition in the premiere pro timeline. Render freeze, a lot of playback issues, and many more problems... Until I decided to remove these links between premiere and after effects and render out all the after effects compositions one by one and insert as clips in premiere pro. 1 week working away with back and fourth.
I've got a huge workstation:
i7 4990
32Gb ram
GTX780 3gb
256 gb system ssd
2 Tb project storage
*All my hardware and software are update.
I know that a lot of folks are on the same huge problem and I want to ask everyone:
How do you save this?
What is your pipeline?
Are there any solution?
Best practice to use dinamic link in a huge project?
Thanks,
Ruben Gimenez.
R&D iceblink.es
www.rambot.es

Thank You, Jim -
Unfortunately that specifically did not work.
Based on another comment sent to me, here is what did.
In PProCC
File > Adobe Dynamic Link > New After Effects Composition
In AECC
From that composition created from PPro, I imported the project (aep) initially created in AECC from another team member. Saved the file.
Back in PProCC
File > Adobe Dynamic Link > Import After Effects Composition
Magic.

Bluetooth connection between Mac book pro and IPad

Hello,
i am having trouble creating a Bluetooth connection between a Mac book pro running Mac OS X 10.6.8 and a IPad air 2 iOS 8.1.2.
I have managed to pair the devices but when I try to create a connection to transfer data an error message on the Mac comes up saying "Bluetooth network unavailable, make sure device is on, in range and set up properly", similarly if a connection is tried from the iPad an error message comes up saying "make sure the device is on".
Both devices Bluetooth is on and discoverable and i have managed to pair them but can't create a actual connection!
Any help / ideas appreciated?
Best regards

Bluetooth paring for file transfer is not supported on iPads.
You can use Airdrop if both devices support it, or a 3rd party App, but you cannot directly pair an iPad to a Macbook and transfer a file over the bluetooth connection.

Is anyone having problems with the Bluetooth connection between the iPhone 5s and Renault Media Nav is so is there a solution.

IiPhone 5s Bluetooth problem with Renault media Nav very poor connection, both phone and media Nav are up to date software is there a solution

Here we use MediaNav with iPhone4s, 5, and 5s. I use spotify to stream music, it works great. But each approx. 15s the signal drops for a moment.
I believe there is nothing wrong with the bluetooth connection of the iPhones, as I use them with other audio systems.
The link belows shows the following stated:
"There is a fault with the MediaNav Bluetooth connection when streaming music."
"Renault are aware of the fault and will not be telling any new customers"
"It is not a priority"
"There is no timescale for a fix"
http://www.shesaidbeauty.com/sammakeup/blog/renault-clio-medianav-bluetooth-faul t-830095

Can't use internet with bluetooth connection between iPhone and macbook

My iPhone and my macbook both show that I have a successful bluetooth connection, but I can't use the internet on my macbook. What might be the problem?

jeb wrote:
My iPhone and my macbook both show that I have a successful bluetooth connection, but I can't use the internet on my macbook. What might be the problem?
Basic question: Do you have a tethering plan with your carrier? It isn't automatically provisioned; you have to ask for it and pay extra with most carriers. See these tips from Apple:
iOS: Understanding Personal Hotspot
iPhone: Troubleshooting Personal Hotspot

Does anyone have problems with Bluetooth connection to stereo in car

I'm having problems with my iPhone 4 regarding my car Bluetooth was fine before update but after update nothin but problems sometimes it connects but very low volume also when I come out of car my ringer volume goes down very low meaning If I don't turn it backup I can't hear incoming calls or message tones already had replacement phone from apple but once again after update same problem do u guys know if apple are aware of this problem as guy at genus bar basically saying that it's my stereo that needs updated my car is a 2011 seat Leon which stereo is made for iPhone 4 contacted garage and they said its down to the update I have read of a few problems like on forums and wondering when the geniuses are going together finger out and sort these problems out as I feel like throwing my phone out the window when it starts it none sense also when it connects with low volume in car I have to turn the Bluetooth off and back on again for it to connect properly

Hello:
I think you should contact Pioneer as both devices you mention are from that manufacturer.
Barry

Problem with Bluetooth connection to computer

I have a Nokia 6120 Classic, which I synch by bluetooth with my Toshiba Satellite A200/H01 (Vista Home Premium 32 bit).
A few days ago, I started getting this message on start up: "TosBtMng has stopped working" I updated all the drivers for BT devices in the device manager, but this did not help. I then installed the Toshiba BlueTooth stack 6.40.02(T), and this did not help, either.
Could someone please help me? I feel it must be a conflict between the PC Suite/6120 Classic and the computer's bluetooth. I have Nokia's PC Suite ver 7.1.30.9. I have been using the computer's BT without trouble for 18 mths now, until last week.
Thanks a lot. Andrew

try system restore.
that fixed it for me.
N8-00

Problems with bluetooth connection to wireless mouse and keyboard

I am using a mac book (aluminium) with 10.6.4 with a Cinema Display and a wireless keyboard and mouse. My time capsule is located only 1 meter away from the mac book and every time the automatic sync starts my mouse and keyboard do not repsond anymore. It seems that the bluetooth connection is somehow heavily loaded due to the network traffic. I have updated all devices and restarted the computer several times. It always keeps on doing that. Any help?

philip_axmann wrote:
every time the automatic sync starts my mouse and keyboard do not repsond anymore.
what you are seeing is called _*wireless interference*_.
change the channel your TC broadcasts on.
JGG
edited by the Jolly Green Giant (where Green stands for environmentally friendly)

Anybody else having problem with bluetooth connection in vehicle

I have had the iPhone 4s for about 10 days now, and my problem is lag time connecting to the Bluetooth in my vehicle. When I make a call from the phone, the Bluetooth doesn't connect until the call is picked up on the receiving end. In other words I never hear the phone ringing, nor do I hear the person I am calling say hello. Apple has sent me a new phone, it has the same problem. They think its my vehicle. Called Toyota for Bluetooth upgrade, they said I should not need one. My previous 2 phones hooked up without a problem. Yesterday I tried my sons iPhone 4, it hooks up immediately. So I am assuming the 4s has a software issue. Which Apple is not as yet aware of. Anybody else with this problem. Andre

bingmei wrote:
I haven't had a consistent 4G signal since 7/19. I called Verizon and tech said there were no reported outages. Trouble ticket was created but I haven't heard anything yet. I thought maybe it was related to heat wave but today, still no signal and it's cooler. I l live in the city and work downtown. My software is current and I'm not rooted.
Hi Bingmei,
I understand your frustration with not getting a 4G signal in Chicago. Are you still experiencing this issue? The post below yours states that a power cycle corrected the issue. I did check my references and I am not showing a 4G outage in Chicago from the 19th.
Have you received word back yet from the trouble ticket that was issued? Please let us know so we can make sure that your issue is resolved.
Thank you and have a great day!

HT204387 Problem with Bluetooth connection.

While I can pair my LG 290c cell phone with my iPad (getting a confirmation number on both screens), when I attempt to make the connection, a "LG290c not supported" message comes up. Not sure why it pairs in the first place if not supported.
Can anyone offer suggestions or help?

     Thank you for the prompt response and the information provided.
     I went to the web site you provided and reviewed the "supported Bluetooth profiles" listed there.
     In looking at the one marked HFP 1.6, it seems to be stating that if I interject a Bluetooth-capable headset between the iPad and the telephone, I might not only get all three devices to "pair," but perhaps even be able to get all three connected to one another.
    Have you--or any other reader--had any experience with such a set-up?
    I have a Magellan GPS unit in my car, and I've not only been able to pair the phone and the GPS unit, but now calls made to the telephone can actually be heard on the GPS unit (creating not just a "hands-free" environment," but one where I can actually hear the caller much better than I could with any annoying earpiece or "bud," etc. I thought if I could do the same with the iPad, I'd be able to enjoy the same convenience while away from the car.

[Q]Problem with Bluetooth connection between Xiaomi Mi Band and Lenovo P780.

Similar Messages

Maybe you are looking for