Q re: editing an Apple based loop and resaving it

Hey everyone,
I have a quick question that I hope you can all help me with.
In GarageBand, I have edited a particular loop by cutting/splicing sections to shorten it. Am I able to SAVE this loop as a seperate loop than the original, so that in the future I just have to search for my edited loop, and use that, instead of having to reedit the original every time.
Hopefully I am making this clear. If you need any more info just let me know! Thanks for any help!
Cheers

titanisiam wrote:
Am I able to SAVE this loop as a seperate loop than the original
absolutely. select the loop, use the Add To Loop Library menuItem, and name it as you wish. it will be its own separate loop.

Similar Messages

NEW BUGS IOS 7 Apple Logo Loop and Unwanted Frame on Iphone 4

I just upgraded my Iphone to IOS 7.1.1 on Iphone 4. previously this has never happened since I upgraded from ios 5 to ios 7. following frequent problem I experienced on my iphone :
BUGS # :
Iphone abruptly turns off after a few minutes idle and can not normally turned on by pressing the power button. after that I did a hard reset to restart by pressing the power and home buttons simultaneously. but sometimes always fail, because the iphone fail to boot. always appear apple logo and not to enter into the core program and sometimes up to iphone gets hot and suddenly a white screen in the middle
When I press the home button twice or three times press the home button, suddenly appeared a strange black box :
I think ios 7 is a product fails
is there any solution of this problem?

Did you perform the initial update using iTunes or over the air?
-Software problems are usually resolved by connecting to a computer with iTunes, and restoring to factory settings. I recommend you connect to iTunes, create a fresh backup file, then restore to factory settings (Set up as new and retest). If everything is ok, then restore your backup. If the problem returns, there is something corrupted in your backup file.
HTH

Apple Loops and the Loop Browser

maybe I'm missing something here, but whenever I save an edited audio file (or loop) with Apple Loops I can never seem to find the same file in the Loop Browser.
(unless that is how the app is suppose to behave ...)
I assumed the Loop Browser behaves somewhat like Logic's Project Manager, referencing and finding files that are associated with Logic Sessions.
Long story shot, how can i save my edited Apple Loop files and still find them using the Loop Browser
Thanks.

The additional content is not just the loops. It is also all the samples for the instruments etc.
You are correct, however, in the method of moving the loops.

How do i edit my billing info if my credit card associated with apple id expired and i have a duty to app store from the time when i had the old credit card?

how do i edit my billing info if my credit card associated with apple id expired and i have a duty to app store from the time when i had the old credit card?
so the thing is a few days ago i made an app store purchase and i didn't know i was running out of money on my credit card. i realized that only when i tried to purchase another item and it didn't work. nothing special til here. the problem is that meanwhile my credit card was replaced by a new one by the bank because the old one was soon expiring. So the data associated with the old credit card no longer exist.
i tried to edit my billing info associated with my apple id in order to enter the new credit card data, but the system doesn't allow me to do that.
so i can neither pay my purchase, nor edit my info, nor access app store anymore.
what's next? any ideas? thanks

Servers down wait till status is fixed to change or add your data http://www.apple.com/support/systemstatus/

Got a new mac today, I created my iCloud account (and therfore my Apple ID?) I tried to set up my iTunes and download updates, and it says i need to review my account, then I had to edit my Apple ID details, but said my email address was invalid???

Got a new mac today, I created my iCloud account (and therfore my Apple ID?) I tried to set up my iTunes and download updates, and it says i need to review my account, then I had to edit my Apple ID details, but said my email address was invalid???

From the information that you have provided, it sounds like your Apple ID has been disabled. You can read this to see how you can troubleshoot that issue.
Apple ID is Disabled - Apple Club - Google Sites
You can try signing out of your ID on the iPad and sign in with his ID and see if that works.
Settings>iTunes and App Stores>Apple ID. Tap your ID and sign out. Then sign in with your husband's newly created ID.

After IOS8 update I am in a loop of putting in my Apple ID password and then always being kicked back to the Hello screen.

I updated IOS8 yesterday, on I phone 4s. I am now stuck on loop of Hello screen and finish setting up ICloud. I enter the password and am taking right back to the Hello screen. I have turned the phone off the back on several times, no change. I have changed my Apple ID password and check that the change was made. Password changed, no change in loop. Help.

Hello Edward
Follow the prompts on your iPhone and you will get either at your home screen like normal or get to a point of restoring from back up. The article below will give step by step for restoring from back up.
iOS: How to back up and restore your content
http://support.apple.com/kb/HT1766
Thanks for using Apple Support Communities.
Regards,
-Norm G.

HT2242 How do I change my country in my apple account? Every time I sign in, the system automatically sends me back to the store my account is currently based in and I am unable to change this. I keep going in circles.

How do I change my country in my apple account? Every time I sign in, the system automatically sends me back to the store my account is currently based in and I am unable to change this. I keep going in circles.

No, What I mean is, Now I am leaving in USA but every time that I tried to download an app only appear app available in Venezuela no the one available in USA.
I already change my address and select USA but still I can not download app for USA

Is it legal for me to create a music remake of an apple loop and make money off it.

Me and my brother made a rock version of one of the apple loops and we were wondering if it was legal to make money off of it by selling it somehow sometime in the future.

That is one of the exceptions that restrict the use of the loops - better have your lawyer look at this:
Using royalty-free loops in GarageBand with commercial workLearn about the usage of royalty-free loops in GarageBand on commercial songs, multimedia presentations, videos, and animations.
It says:
The GarageBand software license agreement says:
"GarageBand Software. You may use the Apple and third party audio loop content (Audio Content), contained in or otherwise included with the Apple Software, on a royalty-free basis, to create your own original music compositions or audio projects. You may broadcast and/or distribute your own music compositions or audio projects that were created using the Audio Content, however, individual audio loops may not be commercially or otherwise distributed on a standalone basis, nor may they be repackaged in whole or in part as audio samples, sound effects or music beds."
So don't worry, you can make commercial music with GarageBand, you just can't distribute the loops as loops.
The problematic part is the last sentence:
you just can't distribute the loops as loops.
Regards
Léonie

TS3694 Apple 4s stuck in a loop and not restoring or updating Help please!!!!

Apple 4s stuck in loggo loop and not restoring or updating. I have tryed all the recomended stuff all the youtube video EVRYTHING!!!!! I cant think of any reasone for it to not work .one minuet it was playing music on my sterio and the next this loggo loop.   HELP PLEASE!! **** YOU APPLE!!!!

Maybe:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Or
Restore loop (being prompted to restore again after a restore successfully completes)
Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
Next try placing in DFU mode and then restoring.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Then try restoring on another computer.
Last, make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Have conflicting views from Apple Specialists; I'm ready to buy my 1st Mac, however work with a PC user with MS Publisher files a lot. Can Pages open, edit and resave them? Or, do I have to buy Publisher software for Macs?

Have conflicting views from apple Specialits; I'm ready to buy my 1st Mac. However, I work with a PC user with MS Publisher files a lot. Can Apple PAGES open .pub files, edit and resave them? OR, do I have to buy Publisher software for Macs? if yes to buy, any recommendations?

If you want to switch from PC to Apple I recommend a programm like Parallels.
It has a tool (believe its called transporter) which runs on your current PC and creates a file (big) which is a "virual machine". It is a 1:1 copy of your PC which will run under parallels on your iMac.
You will be running your "old" PC as it was under MAC OS X while you run MAC applikations etc at the same time.
This is how I made the transition to Apple.

I've just edited all my apple id information and my iMessage will not work at all, can anyone help?

I've just edited all my apple id information and my iMessage will not work at all, can anyone help?

Try tapping Settings > FaceTime, turning FaceTime Off, editing the Apple ID associated with FaceTime, and then turning it back on.
If that doesn't do it, take a look at this Apple doc -> iOS: Troubleshooting FaceTime and iMessage activation

I had my iphone 3GS and then upgraded to 6.1.3. Now the phone is in a loop and reboots everytime the Apple logo comes up. I held teh home power and connected to itunes to retore, but it won't restore. any ideas?

I had my iphone 3GS and then upgraded to 6.1.3. Now the phone is in a loop and reboots everytime the Apple logo comes up. I held teh home power and connected to itunes to retore, but it won't restore. any ideas?

Hey harikrishnandhk,
Thanks for the question. I understand you are having issue with your iPhone 3GS. You are definitely taking the correct steps, as you'll want to restore the iPhone in recovery mode. For information on doing so, see this article:
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Thanks,
Matt M.

I just installed Time Capsule on my Mac and it works good. It connected to my devices, like, Apple TV, Laptop and Ipad2. I just noticed lately that the Wi-Fi on the Ipad keeps on connecting to my former router, 2wire109. My set up was based on Apple's.

I just installed Time Machine as a router and as a back up and all my gadgets like, Mac, Apple TV, IPad and Laptop connected right away after setting up the TC. I followed Apple's instructions like, connecting the Ethernet cable from the old router to the TC's Ethernet WAN. Now, this is the problem, I just found out lately that my IPad kept on connecting to my old router, the 2wire109. Anybody? I need your help please to correct the problem. I am actually not famililiar with these stuffs yet. Thank you

Settings > Wifi > select the 2wire109, click the blue arrow > Forget this Network.

Loops and building a library

I am a college student in songwriting and music technology. I am working in both Protools and Logic and I find Logic best for writing and Protools best for editing. I want to build even a larger loop library than what is available in Logic Pro 9. I have noticed that I can buy loops a la carte or large packages of loops and save ( Loopmasters.com has a producer package for $694) . I am concerned about format and the ability to manipulate these loops. Midi vs. audio files. Can anyone give me advice for the best way to approach building this massive library of loops?

If you choose to buy loops formatted for the Apple brand (Apple Loops) these audio files are optimized for the use of Logic Pro. So beat matching , tempo and Key changes will work as expected. If you have purchase the Logic Studio Box version, you will find an Apple Loop creating program in your Utility Folder. With it you can start to make your own Apple Loops from any file. And Logic can read rex files that time stretch well and broadcast wave files that contains data for tempo matching and so on. Also when using non apple loops in your project you can right click on the loop, follow the menu to export and create loops in your Apple Loops Browser as well.

Why won't my audio loops and MIDI loops sync together in a project?

I have a number of guitar riffs in a project that I've been making into loops, as I wish to use these as ideas which I arrange in a new project. I've been saving the edited regions of the riffs by going to Region>Add To Apple Loops Library> and saving it as a loop, which is supposed to conform to tempo as stated. These are a blue icon with a little soundwave icon in it.
I have been doing the same with drum loops that I have created using the piano roll. These have a green icon with a note inside it.
I want to use these to create arrangements in a new file. Obviously I need them both to conform to various tempos together.
Why are my guitar riff loops comforming to my global tempo track, but as soon as I add a drum loop and change the tempo, the drum loop will conform but not the guitar.
I've also tried exporting each of the guitar riff (regions) as audio files because I read something in the manual about the audio files needing to be saved in as SDII to conform to tempo, but that doesn't work either.
What's the deal?

I'm no guru, I'm a neophyte, but I'm interested in the problem anyway.
"I have a number of guitar riffs in a project that I've been making into loops... I've been saving the edited regions of the riffs by going to Region>Add..."
I assume all of these regions are audio regions. Do they all have an anchor assigned to whatever you consider the downbeat?
"I've also tried exporting each of the guitar riff (regions) as audio files..."
Once imported anew, again, is there an anchor indicated. I think that may be key.
You say that sometimes they work? What have you changed when they do? The tempo?
-- Gerry

Q re: editing an Apple based loop and resaving it

Similar Messages

Maybe you are looking for