Q. re: Z10 10.2.1.2976 update Today
Has anyone had experienced this update on Verizon? Just new to this BB10 so I thought I would ask for advice or inputs.
This 7-day old Z10 I bought has version 10.2.1.2122 AND it would be nice to address the VERY hard-to-access youtube (through z10 broswer and the other 3 apps in BB store & EVEN through the Z10 as a hotspot on other devices (Win8, iOS5 and 6) + WIFI Low speed (download especially)
Also, the browser no longer locks in rotation on the landscape mode so maybe this'll fix that too.
The camera problem is quite common and a previous update (earlier version of 10.2, around Dec 2013) did cause this problem with quite a few phones according to Internet searches as well as Crackberry forums. However, in my case, the very flaky compass now does not work at all but the message it gave "device not supported" indicated a sensor problem. Under the Z10 help function on the phone is a testing option and it indicates sensor failure - the rotations, proximity, gyroscope functionality. So hardware failure may be the cause rather than software (update) even though the update and sensor failure happened around the same time. I have only had the phone for about two months so I will contact Verizon about a replacement. Still, I have been a Blackberry and Verizon user for almost a decade with no problems until now - hopefully it is just an isolated z10 fluke.
Similar Messages
-
Why are two different Z10's on such different update schedules?
My wife and I both have Z10's. I've had 2 or 3 Software Release updates in the time that she's had none. The only difference between the two Z10's is that I bought mine from Blackberry store, while hers was bought through her service provider (Wind Mobile in Canada). I just received my latest SR update today, 10.3.2.2226, while she's still on 10.3.1.1779. I checked her Software Updates, and told it look for a new update and it didn't find anything. Now, even though her phone was purchased through Wind, it's been unlocked, so it's pretty much identical to mine in terms of features.
Nope. It's still a Wind branded phone. Unlocking it does nothing for you otherwise, especially if you're sticking with the original carrier. The only thing that unlocking does for you is allow the phone to be used on another carrier. Now, if you could get the SIM card of another carrier that is offering a newer OS, then you could get that OS. But, it will never get BlackBerry's direct OTA update. You will have to update it yourself through an autoloader or with Sachesi.
-
After doing the latest EFI update today my WiFi will not work
After my latest EFI update today on my MacBook Air I have the countdown circle (like one you get when you shutdown) on for about 20 minutes. I have leave for work so I grabbed my iPad, now it's over an hour and the machine hasn't come back. I am afraid of turning off the computer since that potentially could screw up the machine. Anybody else has experience with this type of problem after EFI update and any advice?
-
Hello,
Please help me figure this out. I'm very unhappy at the moment. I'm fustrated and don't have any idea how to revert to the original version before the update was done on iMovie 10. I NEVER hated APPLE until NOW!! I love APPLE products and apps so please help me stay in that mindset. So I worked on some movie projects when I got my macbook pro 6 months ago. I update reguarly. I saw the update prompt and honestly, I did not think I would have ANY issuess with opening my previous files that I created only a few months ago with this updated version.The new updated version of iMovie 10 won't let me open my previous files I created before the update today. I have a wedding that I'm trying to finish and deliver and now I can't because that file version won't open. I keep getting an error message and the iMovie app closes. Last night I saw the file and tried to open it but no luck. Error message came up again. I reboot and turned off my laptop for the evening and tried again just now but nothing!! I need that video. My job depends on it! I worked so hard on this wedding video and now it's lost and won't open. I work another job and don't have much time. I really don't want to start all over again. Please help me. Thanks so much for your assistance.
Fustrated APPLE customer
Jolly A. RuppI also have Jolly's problem. I found the iMovie 9.0.9 folder and tried to launch the older version of iMove. It would not launch. I removed all of the iMovie preferences from the Preferences folder, removed iMove 10 from the applications folder, and restarted my Mac. iMove 9.0.9 still won't launch and I can't access my videos created with the older version of iMovie. Is there a way to uninstall iMovie 10 and reinstall iMovie 9.0.9?
I am running Yosemitie on a iMac.
Paul -
Since the Mountain Lion OS update today I've had issues with internet connection and e-mail, has anyone else?
That's what I would have thought, but even after saving the setting, as soon as I shut down my computer or log out of Mail, it automatically defaults back to 25. It's a bit frustrating.
Now I just need to figure out how to get rid of those horrible pop-up banners but still have my glass sound and number of emails in the red dot when I get an email...
These little tweaks are the only thing I HATE about upgrading my OS. -
I did an APPLE update today and now my itunes will not open. It give an error message of corrupted. What can I do to open it?? The message was still he same when I plugged in my ipod. This happens with almost every update. Thanks.
See Troubleshooting issues with iTunes for Windows updates. Use the steps in the second box to repair your iTunes installation. Your library should be unaffected by these steps but there is backup advice elsewhere in the user tip.
tt2 -
how can I check my passcode I updated today and when I am going to reset all content and setting my iPhone 4S they asked me for passcode when I entered the passcode the one I just update too is doesn't want to accept it
I have had the same problem with iPad recently not too sure why it happened but if you are completing a full reset anyway the easiest way is the restore via itunes on your computer and then set up a new passcode again. Resetting via itunes doesnt require a passcode so it should go straight through.
Hope this helps -
After the Airport update today, Airport Utility 6.0 no longer sees my new Extreme or my 2 new Airport Express relay stations (same network); however, my internet is working and all Airports are green? I'm running Lion on my iMac and updated when Airport Utility prompted me to do so a few hours ago. After applying the updates is when Airport Utility stopped seeing my routers. But they are working? Thoughts?
Did you remember to completely power cycle the entire network?
You would want to do this after any update or change to the network.
If you did not do this yet......things are out of sequence.
Power off everything on the network.....all devices.....power down order is not important
Wait a few minutes
Start the modem first and let it run a minute or two by itself
Start the next device connected to the modem the same way
Work your way out on the network starting each device about a minute apart
Check the network -
Dear Support Team,
I agreed to the Time Capsule 7.6.4 update today, but as it was completing, I received an error. It said to close the page and try again.
I use my Time Capsule as my Airport wireless router and now can't access the Time Capsule to re-upload the Firmware update.
Has anyone else had this happen?
Is there a way to resolve the problem?
Do I need to hardwire the Time Capsule? Then what?
Would really appreciate some help!!
Thanks everyone.Factory reset the TC and it should come back to life.
The Factory Reset.
Power down the TC.
Hold in reset. and keep holding it in. Be Gentle! It is a tiny surface mount switch with a plastic lever.. Attempting to push it out the other side of the TC will not make the switch turn on better.
(I fix TC and have several reset levers bent over and jammed or broken off).
Power on the TC.. remember with the reset held in.. this needs three arms.. a friend or power switch you can get to with your feet..
Keep holding in reset for about 10sec until the front LED flashes rapidly.
Release reset and wait .. the boot will be slow as it deletes previous setting.. only from router side and pulls out the factory defaults. No files are deleted on the hard disk.. but the name of the TC may change.
As a rule .. wireless is not reliable enough for mission critical work like firmware upgrades.. (Heck I don't think it is reliable enough for backups).
Apple doesn't insist on wired connections.. some other manufacturers do.. and post warnings not to attempt it over wireless. Warnings inevitably read after the failed firmware update btw.. so perhaps Apple have decided to just save themselves the hassle.
I believe it is just good practice to use ethernet for any time that sitting on a branch.. whilst sawing it off (ie failure will kill any future access).. means you always use ethernet for any setting up of a wireless router.. but you see I am old.. with grey/white hair.. and too many dead modems and routers around me. -
My ipod touch 4g just updates today on itunes and the update caused more trouble than good for me. My ipod will no longer show me the battery percentage in the top right hand corner and I am not allowed to drag other applications to the bottom panel. Also my itunes doesn't allow "enable disk use" anymore. Can anyone help? My ipod now says that it's the 4.3.4 version
- Unjailbroken iPod never showed % battery. Just the icon.
- Unjailbroken iPod Touches never had a disk mode.
- What happens when you try to drag a wiggling app to a empty space in the bottom? Does it move and snap back? -
Why icannot export pdf file from other app to ibook (after update today)?. Please correct my problem.
iPad 2, iOS 5.0.1Why icannot export pdf file from other app to ibook (after update today)?. Please correct my problem.
iPad 2, iOS 5.0.1 -
I did the update today and now itunes can't see my ipod, uninstalled iTunes and all the recommended things, nothing has worked.
It worked just fine last weekend. I have windows 8.1 and a brand new pc, new iPod also, the new Nano. now after the update today, iTunes says iPod has been detected but could not be indentified properly. I can see it in windows. I tried the reset on the iPod also. what else can I do?? HELPuninstalled iTunes and all the recommended things
Doublechecking. Have you tried a complete uninstall of both iTunes and all the other related software components and then a reinstall? If not, try the instructions from the following document:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8 -
Hot 2010 MacBook Pro on 10.6.8 Update Today 10/28
After the 10.6.8 update, the CPU temp went to 149°F with the fans at 6000 rpm with no running apps except a few utilities, Omni Outliner and Safari.
Did the Safari update today, too and every web page now causes Little Snitch to ask for 1-2 dozen approvals for connecting to outside servers.
Other than PathFinder, Default Folder, Quickeys, Numbers, Safari & Mail, nothing of note is open & none of them are doing any tasks, except writing in this windo in Safari.
This is one bizarre update and has caused me to not trust Apple's updates all of a sudden.
Has anyone seen this and had any clue as to what causes these issues?
Thanks -
PS: I am going to have to backup the whole **** thing and then restore a clone from 2 days back and move the data files back in. This is the pits.
My update regimen in the future will be VERY careful:
1. Clone the internal HD (separate from other archiving and backups)
2. Update the external Clone from Apple's Software Update and try the external Clone for a number of days.
3. If there are no problems, then finally update the internal HD.Reloaded the older 10.6.7 MacOS X and now 108°F @ 3000 rpm with the same apps & utilities running, and that 50°F difference is HUGE. Something causes the energy expenditure and I'm sure curious as to what it might be.
Safari doesn't bug me trying to cause Little Snitch to log all sorts of new server connections or deny them.
Things like this are disconcerting, as I don't use unusual applications or utilities and nothing like this has happened in the last MacOSX versions since I started using OSX about version 10.2 (I figured I'ld avoid the 10.1 beta release).
I must admit, there is a small chance that something flipped a bit wrong on the install of the updaters, for 10.6.8 and Safari. In that case I would still expect that the installer should have caught the buggy install, but that's the way it goes. -
After updating today MacPro with OS 10.7.5 will not restart, can someone advise what to do?
Had an OS update today, from OS X Lion to ver 10.7.5 which needed to restart to install. My computer will not restart. Have MacPro.
Ok so here's what happened. My machine has 8GB Ram. We tested the Ram and moved it between the cards & slots in the Mac in various combinations. As far as we can tell Ram is fine. We removed two sticks of Ram and now the machine runs with 6Gb Ram... At a loss to explain why but the machine is now running again and seems normal if a little slower. Will continue to run with 6 and see what happens.
Regards
T -
since last update (today) I get invalid Apple ID password when trying to use back to my MAC in Icloud app on my MAC, password works on all my other devices. GLITCH ?
Try going to the Apple ID page on your web browser
http://www.apple.com/support/appleid/
and try to either retrieve or reset your password
(obviously you had to be able to successfully log in to be able to post here)
I was finally able to log in through my system preferences after about three or four hours. I ran a disk utility to repair permissions and restarted and it seemed to work ok.
Maybe you are looking for
-
Can't connect to cellular data on my iphone 4s
So here's a description of the issues I've been having over the last several months. I cannot connect to or use my cellular data when not connected to wifi. Example: I will be out at the store or on my way to work and I will try to search google but
-
How do you change the tex size on firefox
I can not find a tool bar that has a fonts on it.
-
BPM 7.3 - Adobe Lifecycle Designer 9.0
Hi guys, I`m a PI developer and quite new to SAP BPM, only took part in the SAP training several months ago. Now my colleague installed a BPM 7.3 system and I`m trying to implement some processes starting with the sample of the training. At the momen
-
I have a snowlwopard server setup for classes and have a problem with FTP access. I think the FTP and share points settings are correct, but when I add a student user and give access to a specific folder he can see everything that is in the entire d
-
Blueprint for Project System Projects
Hi All, Can you please send me some PS Blueprints to my email [email protected] as i have to work on some implementation projects in future. Thanks Muzamil