Q10 display too big after 10.3 update

My Q10 was recently updated to 10.3.1 and since then the screen has expanded so I have to pinch it to get it back to normal size, Any solutions to this irritaing problem? It also means I can't swipte across until I have pinched the screen.
Solved!
Go to Solution.

Sounds like you may have accesibility turned on, go to Settings->Accessibility->Magnify Mode to check if you have.
If you've been helped click on , if you've been saved buy the app.
Developer of stokLocker, Sympatico and Super Sentences.

Similar Messages

My icons are big and display too big for screen. help..

my icons are all big on desktop but not on dock. safari screen doesn't fit on my display, too big. what have i done?

Possibly zoomed the screen. Hold CNTL and scroll down with the mouse or trackpad.
Regards,
Captfred

JTable is display too small, after a pack() it's too height

i have a table of 5 columns and 2 rows
it is placed on a scrollpane and then in an internal frame
the result is a table that is displayed too small (height=32 == getPreferredSize().height)
if i add a pack() statement then it is displayed too big, width is ok but height =~ 500 (should be approx. 100
what to do?

thank you! i like the one-liner!
however it works only the first time, not the second time when rows are added
DefaultTableModel model;
JTable table;
String[] columnNames;
Object[][] data;
columnNames = new String[5];
columnNames[0] = "N"; columnNames[1] = "T"; columnNames[2] = "E";
columnNames[3] = "E"; columnNames[4] = "P";
data = new Object[2][5];
data[0][0] = "e"; data[0][1] = "i"; data[0][2] = "e"; data[0][3] = "-"; data[0][4] = "2";
data[1][0] = "s"; data[1][1] = "f"; data[1][2] = "s"; data[1][3] = "2"; data[1][4] = "2";
model = new DefaultTableModel(data, columnNames);
table = new JTable(model);
table.setPreferredScrollableViewportSize(table.getPreferredSize());
// table is show with perfectheight of 2 rows
JScrollPane scrollPane = new JScrollPane(table);
internalFrame.add(scrollPane);
internalFrame.pack();
data = new Object[3][5];
data[0][0]="A0";data[0][1]="A1";data[0][2]="A2";data[0][3]="A3";data[0][4]="A4";
data[1][0]="b0";data[1][1]="b1";data[1][2]="b2";data[1][3]="b3";data[1][4]="b4";
data[2][0]="c0";data[2][1]="c1";data[2][2]="c2";data[2][3]="c3";data[2][4]="c4";
model = new DefaultTableModel(data,columnNames);
table.setModel(model);
table.setPreferredScrollableViewportSize(table.getPreferredSize());
// still a height of 2 rows instead of 3i have the feeling that i make it too complex :-(

Display too big!

Display prob: Suddenly the display (menus, etc.) is magnified so much I can't see the whole screen, too big to be able to scroll side to side, can't un-zoom. Assume I'm doing something to make it happen. Any ideas to prevent? or to fix short of powering off? Thx!

Thank you! Didn't know about the 3-finger trick! Now that I know, I'm leaving Zoom on in Settings-Accessibility. (Couldn't get to that in menu while it was so big.)
Thanks to all who replied.

NB305 first time setup display too big for screen

I just bought an NB305-310 netbook (two, actually, and the first one had no trouble). It came loaded with Windows XP. When I turned it on I wasn't able to set it up right away, when I came back to it, I found the display of the welcome screens and the setup process assistant is too big for the screen, as if it thinks it has to fill a 15" or 17" screen instead of 10". So I can't see to click on the "I agree" box or the "Next" button etc., so can't proceed through the setup.
I already tried restarting it a couple times (by holding down the power key, since Control-Alt-Delete didn't do anything). I also tried using the function key with various keys that looked like they might affect display size but no change. Even the volume function keys didn't change the volume of the setup background music that plays.
How can I fix this?
Thank you!
RD

mini notebook NB305-N310
Try this. Press Alt + Spacebar to open the control menu (which may be off the screen) at the top-left of a window.
Then press M (for Move).
That will enable you to move the window using the arrow keys.
When you get the chance, you'll want to go here and reset the screen resolution to 1024 x 600.
Control Panel > Display > Settings tab > Screen resolution slider
-Jerry

Print Management Console displays no printers after applying Windows Update for Windows Server 2012 R2 (KB2995388)

After installing optional Windows Update for Windows Server 2012 R2 (KB2995388) on a print server upgraded from Windows 2012 to Windows 2012 R2, the Print Management Console wouldn't display locally shared or remotely shared printers. Another print server
could see the printers on this server, but it couldn't see it's own. Removal of the patch resolved the issue.

Hi,
à
Removal of the patch resolved the issue.
Thanks for sharing in the forum. Your time and efforts are highly appreciated.
On current situation, would you please let me confirm something more?
Please check if this update rollup package (KB2995388) install successfully.
Please run sfc /scannow command to scan all protected system files after installed this update.
If be possible, please re-install Print Server feature on the server after installed this update. Any find?
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu

Facebook app deadly slow, wifi slow, app downloading deadly slow, app crashes enormously, and maps too slow after iOS 6 update

I have a 3rd Gen Ipad Wifi, and it worked like a charm from the day I bought to the time before the update. All the problems started after iOS 6 update. Especially Facebook app is like a using dial up connection with the slowest possible speed. After the update, it became just a little bit faster, but still cant even open photos, and video. Google Chrome crashes often, the game download beame dead slow. Has any been experiencing similar things??????

More memory will help because:
processes killed due to memory pressure
Uninstall:
- Omnibar [Adware! - Remove]
- Slick Savings [Adware! - Remove]
Click on the Remove in your results from EtreCheck
- TuneupMyMac UNKNOWN (missing value). Go to developer's site for how to uninstall
- uTorrent
nnn

Why are my iPhone only apps displaying too big on my iPad in ios7

I have a number of iPhone only apps and previously I could x2 to use them on my iPad. In ios7 that option is no longer available and the contents of the apps appear too big and I have to school from side to side to read the details. One example is G-Toolkit

+1 on that. my problem app is the AT&T mobile app.

27 inch thunderbolt display blacks out after Thunderbolt Firmware Update 1.2

Bought 2 new 27 inch TB displays for two different machines and after a couple of days the Thunderbolt Firmware Update 1.2 appears on my Mac Pro with one of the displays installed. So I install the firmware update. Now my display blacks out periodically and I keep getting Graphic Display Errors with a request to sent the errors to Apple. Running a 32 GB Mac Pro (late 2013 circular style) I have three monitors connected (two 20 inch cinema displays and the new 27 inch display). This machine is supposed to be able to handle three 4k monitors or 6 standard TB displays. I've seen the posts about the blacking out with this monitor but I didn't have any problems before the firmware update and now I've got them pretty regularly. I had the blacking out problem on an earlier monitor and took one of the monitors back and Apple gave me another one and this is the replacement. Same problem, but this one only started after the update. I'm hoping someone from Apple reads these messages and can let me know what's up.
BTW, I also have an older 27 inch Apple monitor that ran perfectly on this machine so I'm disappointed that I spent all this money and now get the blacking out issue.
Mac Pro (Late 2013)
Processor 3.7 GHz Quad-Core Intel Xeon E5
Memory 32 BG
Graphics AMD FirePro D300 2048 MB

I have my Thunderbolt display connected to my MacBook Pro and have been experiencing the same issue, getting worse over time. The folks at my local Apple store did not know what to do about it. So, I looked around and tried different thing.
The one thing that seems to be working is to System Preferences > Build-in Display > uncheck “Automatically adjust brightness.”
I hope this helps.

Can't display flash information after latest Vista Update..

Hello all,
I am currently running Windows Vista with Internet Explorer 8
RC 1. I went onto a webpage where it said that I did not have the
latest version of Adobe Flash Player installed. I installed the
latest player, version 10.0.22.87. It says that everything is
installed correctly. When I look at the page:
http://www.adobe.com/flashplatform/
Nothing shows up. It says that I need to go and install the
latest version of the Flash Player again. It was working just fine
a few days ago but after the latest Vista Windows Update, this
problem is showing up. Anyone have any ideas??

Dav4783, are you trying to adjust the brightness up or down? Does the phone seem brighter or darker than it was before? Have you tried powering the phone off and then adjusting the brightness again?
Here is a list of what the current software updates:
Symptoms Resolved:
In set up wizard, clock format, selecting preview of clock is OK, but there is no soft key to go back to clock format.
Fixed verbiage on popup messages to read as:
"Use PC option to safely disconnect, before unplugging USB cable from the device."
"PLEASE BE SURE TO SAFELY DISCONNECT YOUR DEVICE FROM THE PC BEFORE UNPLUGGING THE USB CABLE."
When you have a data session that is getting information the circle indicator should rotate in a circle, the red section should move around the circle showing user that it is getting data - it does not rotate.
Facebook UI under Messages - select write on wall. On device it says 'set contact id', instead of 'select contact'.
Chinese input - increased Chinese font size from 18 to 22.
Quick Text was not converted to Chinese (remained in English).
Changed text to "select Internal Display theme" in setup wizard, display themes.
When a customer tries to send an SMS using (app info > Menu > Tell a friend), in some cases the phone may reset.
When a user tries to download tones in a memory full condition, the device sometimes doesn't display the memory full popup.
Added a List option under Easy Setup > Clock > Preview.
Setup Wizard: After selecting a language in the Setup Wizard, the delete screen that follows should have the languages listed in their native tongue (so for English it would say "Simplified Chinese, Korean").
Moved Erase option to Options and added a List option under Media Center > Pictures > My Pictures in the picture view.

V5 No display no access after 8.1 update

I have an acer aspire v5. After I updated from 8 to 8.1 my display no longer worked. I tried hooking up the adapter to an external display and it doesnt detect it. So after trying EVERY solution I could find on the internet I uphooked the hard drive formatted it and installed windows 10. Hooked it back in the v5 and still nothing. No display. So someone suggested it is the motherboard but I hate to pay out the money for it and that be the solution either. Anyone else have this problem and replace the motherboard to fix it?

Dulceflores, The following steps in the link below will delete your harddrive and install a clean copy of Windows 8.1 (assuming your computer came pre-installed with either Windows 8 or Windows 8.1.) I'm not sure if it will work, but it is what I would try. Obviously, you'll want to skip the part about ordering recovery media from Acer until after you have successfully installed the clean copy of Windows 8.1 (if possible). If you decide to just continue using the clean copy of Windows 8.1, that would be fine. The Microsoft windows 8.1 USB media has powerful tools and I'm pretty sure operates in safe mode. http://community.acer.com/t5/Windows-8-1/Acer-S7-392-Factory-Image/m-p/362689#U362689

Image size is too big after "Smart Build Grid"

The Smart Build Grid feature is awesome. Unfortunately, I have one issue with it- it sometimes zooms the images too much when using the grid feature.
Specifically, I have a 4 x 3 matrix of rectangular images. With each Zoom from the grid, Keynote zooms too much, so that the center of the image is nicely displayed, but cuz it zooms too much, important info on the sides of the image is cropped out in the magnified image.
How can I set Keynote to zoom so that the zoomed image is only as big as the longest axis relative to the slide (thereby displaying all information)?
Keynote 4.01, OS 10.4.11, PPC G4 867 MHz.
Thank you very much!

But the image is in
<mx:DataGridColumn headerText="Input Status" ...
How can it be fixed? Please provide your advise. Thanks.

System fonts became so big after latest virtualbox update

I'm running Arch Linux 64 as a guest on a Windows 7 host, with Virtualbox 4.3.28. After upgrade from May 19, systems fonts suddenly became so big (at least tripled). I am a newbie here, don't know how to attach a screen shot.
I've narrowed down to these 2 package upgrades:
community/virtualbox-guest-modules 4.3.26-7 -> 4.3.28-1
community/virtualbox-guest-utils 4.3.26-3 -> 4.3.28-1
If I skip these 2 package upgrades, and all other packages upgraded to the latest (including Linux to 4.0.4), the fonts are normal.

This problem seems a little complicated. It is related to screen resolution but strangely. On W7
1) if I shrink the screen resolution smaller, say 1024x768, and stay with this small screen, the fonts are normal everywhere.
2) When boot up the VM, I cannot use a large resolution like 1920x1200 (as my VM was running under before the recent virtualbox packages upgrade). Otherwise, all fonts become so huge. So I detoured this out by booting in small resolution.
3) After booting up in small resolution, if I increase the resolution, say back to 1920x1200, the fonts on the console (my case terminator) stay fine. However, when I start applications like Sublime Text, Claws mail, the fonts on those applications' menu bar become so huge. The fonts inside Sublime Text are normal. But the fonts inside Claws mail are huge too.
4) After booting up in small resolution, if first start up the applications, then increase the resolution, say back to 1920x1200, all fonts are fine everywhere.

Display too big for the monitor

Suddenly it seems as though I have a dispaly for the visually impared. As if the monitor that would be needed to see the whole dipaly at once would be 32' instead of the 17" available. As a result, I can only see a small portion of the window at any one time. Is this a bug? or did something get turned on that I can turn back off? Please help!!
Ps. This started just after my son watched a dvd on my computer.
imac Mac OS X (10.4.7)

Hello Pieman18,
Glad to hear that it worked for you
The weather isn't too bad right now. We've been up in the 70's and higher for a little while. So, come on up
But, for "millions of dollars" I think I could arrange a trip to California. I haven't been there in about 15 years. So, I'd enjoy the change of scenery.
My wife will actually be down there in October. So, you could always give it to her. Just make her promise not to spend it all before she comes back home
Anyway, I'm glad to hear that you found my solution helpful. It's nice when you can find a simple fix for the odd problems
Welcome to the discussion boards. Be sure to let us all know if you have other questions.

IPhoto 6 photos in slideshow are displayed too big.

I'm using iPhoto 6. The slideshow displays the photos much bigger than in the photo editor (normal size). I want to have them displayed at normal size in slideshow and then adjust them with the size slider. How do I do that? Thanks!

Ok. after first panicking and not reading further on how to fix iphoto, i calmed down and did the reading i should have done first. Seems that holding down the option and command key at iphoto boot-up initiates a rebuild command.
I did a complete rebuild and all the photos are back in order. Not sure why this occurred but I'm happy that it was fixable.
Iphoto rules.

Q10 display too big after 10.3 update

Similar Messages

Maybe you are looking for