Q10 - how to filter emails?

After a recent switch to the new Q10 it appears that all email filters that i had set up for my blackberry service have been disabled.
Clearly, the ability to filter emails (newsletter, etc) from being forwarded to the bby is a key feature of the bby appeal, i am sure they would not eliminate this feature.
However - how do I set it up/reactivate it?
I have a standard corporate POP3 based email (no gmail, hotmail, etc)
I have several email addresses
I am using Vodafone in the UK
thank you for your input and assistance.
Solved!
Go to Solution.

HI this a major flaw, a step backwards really!
There are 2 more features that seem to have disappeared (i) the possibility when answering to an email to leave out / erase the original message and (ii) you dont havethe choice any more between delting a message on the device only / from the mailbox.
Therefore from a heavy email users' point of view, BB10 is "forward to the past"
hope fully you are going to address theses issues.
rgds
Antoine

Similar Messages

How to filter emails using sender email adapter

Hi,
Does any one know how to filter emails of mail server using Sender email adapter(POP3 protocol ) in PI .
To make it more clear let us assume that there are 10 emails in the email server then 3 emails should be fetched for Interface A , 3 emails Should be fetched for Interface B and remaining 4 emails should be ignored and left in the email server as it is , the reason for this is that it is not related with the Interface A or Interface B. Any suggestion or solution will be much appreciated.
Thanks & Regards
Prabhat

Hi,
I guess you didnt get my requirement clearly. My requirement is how to filter emails from email server using sender Email adapter in POP3 protocl and pass it to relevant Interface.
For ex: suppose email no.1 is related to Interface A then it should go to Interface A
or email no. 2 is related to Interface B then it should go to Interface B
or if email no. 3 is junk mail then it should avoid deleting that email and leave that email as it is
The problem/challenge here is that email adapter of Interface A or B reads it first and deletes the email message so it is not available for the Interface A or B.
So I just want that sender email adapter should filter it before deleting email from the email server.
Can you provide some solution for this?
Thanks & Regards
Prabhat

How to Filter Email or Direct Email to a Specific Folder

Hi
I've just bought a Blackberry Z10 but I cannot find how to filter my email. I was able to do this on my older Blackberry Edge.
What I'm trying to do is filter emails by subject, sender, or other parameters. Alternatively, I would like to be able to direct email from specific senders into a seperate folder. As I said, I could do this on my BB Edge but I've searched the web to no avail.
Any help would be much appreciated.
Thanks George

Hi George,
Thanks for your question on email filtering.
What type of email account are you using - ActiveSync, Gmail, Hotmail POP/IMAP etc?
What type of email are you trying to filter - junk email or emails from a specific contact?
Thanks!
-HMthePirate
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Q10 How to delete emails

I have a new Q10 and I can't find anywhere how to delete received emails. In my Curve one it was very simple, there is a fonction to suppress previous emails, nothing like that in the Q10, as far as I could see up to now. Anybody could help me? Many thanks!
Solved!
Go to Solution.

I want to delete a number of emails at once but don't want to select them one at a time. I also don't want to have to delete all emails before a certain date chosen, or all emails from a certain date. For example, if I want to delete forty emails in a row on a certain date, but keep others on that date, I'd like to be able to scroll and highlight those ten emails then press delete (verus having to select each one at a time). I used to be able to do that with earlier blackberry's, but I can't with my q10. Can I do that?

How to filter emails in corresponding folders

Hi Guys,
This is my first post on here so go easy. I wanted to know if it was possible to automate a move of an e-mail into a corresponding folder in Microsoft Entourage based on the the start of the "subject" title.
Example Subject. "A1978 xxxxxx" automatically gets moved into a folder starting "A1978 xxxx".
As i'm new to this I cant seem to find any Microsoft Entourage actions built in. Is there a pack which could help me to achieve this. Any screen grabs of how this would be put together would as be of great help.
Many thanks in advance.

I'm not aware of a way to programmatically create a new mailbox folder (maybe the folks in the AppleScript forum [here|http://discussions.apple.com/forum.jspa?forumID=724] know) in Entourage.
If the folder is already created, then setting up a rule should be straightforward. I have Entourage 2008 and you setup rules via the Tools menu -> Rules... (I'd imagine Entourage 2004 is pretty much the same):
Note in the picture above I have no sub-folders so I have set to move mails to the Inbox (which obviously wouldn't do anything in reality to the messages )

Q10 how do I definethe time period in which my emails are kept on my smartphone

Q10 how do I definethe time period in which my emails are kept on my smartphone, 30 days, 60 days, 90 days forever etc...

I am confused..."Advanced Options" is not there? Or inside of Advanced Options, "Sync Timeframe" is not there?
I'm sorry but I don't have any POP integrated accounts (gave up on POP years ago, IMAP and ActiveSync are so much more powerful), so I can't compare specifically for you. It may possibly be called "Days to Synchronize", and may possibly be elsewhere in the Account screens for that specific account.
Or, indeed, it just may not exist as an available setting for POP.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

SharePoint 2010 list view - How to filter on a multiline text box field - the view filter does not allow me to select it.

Hi there,
Does someone know in SharePoint 2010 list view - How to filter on a multiline text box field - the view filter does not allow me to select it.
Thanks,

Hi，
Per my knowledge,
it is by design that the data type multiple lines of text can only use “contains” and “begins with” operators.
You can also filter the list view using SharePoint Designer,
Open your list AllItem.aspx page in SPD ->click “Filter” > in “Field Name” select your multipe line of text field, in “Comparison” will displayed four choices.
Best Regards，
Lisa Chen
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Can anyone recommend a duplicate file finder application for OS10.6 systems? All the apps I find on the App Store are only for 10.7 and later. I don't know how to filter a search by operating system (if this is even possible).

Can anyone recommend a duplicate file finder application for OS10.6 systems? All the apps I find on the App Store are only for 10.7 and later. I don't know how to filter a search on the App Store by operating system (if this is even possible). I currently have a MacBook running OS10.6.8. If you can recommend an app, please post the URL. Would appreciate any helpful suggestions....
<Email Edited By Host>

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

How to trigger email notification when users fail to reset your password in fim 2010 r2.

Hi,
how to trigger email notification when users fail to reset your password in fim 2010 r2
Regards
Anil Kumar

Hi Sylvain,
I did all thing as you told me.First i created Criteria based Set after this we created a Workflow type Action and Actvities Type Notifcation Email template and finally i called this Workflow in MPR as Set Transition and call Set that i was created below.and
check Advance View of Set this gives
<Filter xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" Dialect="http://schemas.microsoft.com/2006/11/XPathFilterDialect"
xmlns="/Request[(Creator">http://schemas.xmlsoap.org/ws/2004/09/enumeration">/Request[(Creator = 'b0b36673-d43b-4cfa-a7a2-aff14fd90522') and (RequestStatus = 'Denied or PostProcessingError')]</Filter>
But this is not working for me so please tell me where i am wrong.
Regards
Anil Kumar

How to trigger email notification when users fail to give correct answers to reset your password in fim 2010 r2

Hi,
How to trigger email notification when users fail to give correct answers to reset your password in fim 2010 r2
Senario:I want put wrong answering to the Questions that i was during registration if i give wrong answers to the questions then a Email Notification should be trigger to Users.
Regards
Anil Kumar

Hi Sylvain,
I did all thing as you told me.First i created Criteria based Set after this we created a Workflow type Action and Actvities Type Notifcation Email template and finally i called this Workflow in MPR as Set Transition and call Set that i was created below.and
check Advance View of Set this gives
<Filter xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" Dialect="http://schemas.microsoft.com/2006/11/XPathFilterDialect"
xmlns="/Request[(Creator">http://schemas.xmlsoap.org/ws/2004/09/enumeration">/Request[(Creator = 'b0b36673-d43b-4cfa-a7a2-aff14fd90522') and (RequestStatus = 'Denied or PostProcessingError')]</Filter>
But this is not working for me so please tell me where i am wrong.
Regards
Anil Kumar

In Pages 5 when I try to attach a pages document to an email it gives me 2 folders and 4 files ??? How does one email a pages document.

How does one email a pages document? In pages 5 when I try to attach a pages document to a gmail email it gives me 2 folders and 4 other files to choose from.

Sounds like you are using Gmail.
Pages 5 uses a zipped package of files as its format. 3rd party servers don't understand the format and show it as the component parts.
Use Mail toenail the file or zip the .pages document before sending.
Peter

How do i email a video clip from my iphone

How do i email a 6 minute video clip from my iphone

Open Photos > select video > tap forward icon (rectangle with arrow) > Email Video. If the video file is too large for your, or the recipient's email server, it may not get delivered.
You need this - it's all in there:
http://manuals.info.apple.com/en_US/iPhone_iOS4_User_Guide.pdf
Message was edited by: modular747

In BI how to filter the selection options based on inputs on top field

Hi Friends,
In BI, How to filter the selection options based on inputs on top field.
The system should automatically filter the lower level drop downs based on the selection of a higher level.
For e.g. :
If a user selects a Country then the States drop down should only display the State's belongs to the Country. Similarly when a State is selected, the District drop down should display only those District's belongs to the State.
Thanks in Advance.
Regards
Jayaram M

Hi Anil,
Thanks for reply but I couldn't use Compounding Characteristic here. Need some other solution.
Regards
Jayaram M

[SOLVED]How to send email to a local user?

I have installed Mutt, msmtp, procmail and I can send and receive emails to/from remote hosts and I'd like to send email locally also (to the recipients on the same machine as the sender).
When I try to send email to a local user from the root account -
echo "Test message" | mail -s "Test subject" localuser
then I get an error that connection to the port 25 is refused. Because the /etc/msmtprc file contains the 'localhost' as the default account's host, and on the local host I don't have a mail server listening on 25 port running.
When I try to send email from a non-root account which has in /$HOME/.msmtprc file a real email account on a remote server, then of course there is an error that the domain for the email address 'localuser' is not recognized.
How can sending email to local users be enabled?
Last edited by nbd (2014-09-30 22:33:37)

If I understand correctly, postfix it's a constantly running daemon. Seems to be an overhead for delivering only from time to time sent messages.
ewaller wrote:
> Out of the box, sendmail should be safe, but I think you have to enable local mail.
Currently I have msmtp-mta installed, which is described as having sendmail functionality. If I install sendmail - will it be possible to send local email without running email daemons?

R12: How to filter Open Item Revaluation Report based on GL Date

Hi,
Anybody know how to filter Open Item Revaluation Report based on GL Date from and GL Date to in R12?
Since we just upgraded from 11.5.10 to 12.1.3 and found we cannot filter those report for specific date. It shown all data included the old data from 8 years ago also.
We need to run the report only for specific date only. Please share with me if anyone know about this.
Thanks.

Pl do not post duplicates - R12: How to filter Open Item Revaluation Report based on GL Date

Q10 - how to filter emails?

Similar Messages

Maybe you are looking for