Q10 not able to send messages to same account

I have had my q10 for 3 weeks. Al of the sudden today, I can no longer send an email from either one of my email accounts on device to a particular one. I have been doing it for the last 3 weeks. I am receiving emails and can send to other email addresses, just not mine. It tries to send then gives me red dot. The email address is on an exchange server. I send myself reminders all of the time. I tried deleting the account and adding back but same results.

Hi and Welcome to the Community!
With a strong carrier network signal (e.g., not merely WiFi), I suggest the following steps, in order, even if they seem redundant to what you have already tried (steps 1 and 2 each should result in a message coming to your BB...please wait for that before proceeding to the next step):
1) Register HRT
KB00510 How to register a BlackBerry smartphone with the wireless network
Please wait for one "registration" message to arrive to your Messages app
2) Reboot
BB10 Devices. Hold the top button down until the counter reaches zero. Wait for the device to be fully shut down (e.g., nothing at all displayed on the screen, no LED lights, etc.). Hold the top button until the red LED is lit. Wait through the full boot-up process. IF this fails, you can attempt the battery-pull method above, but it is normally NOT recommended unless nothing else works.
See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Hopefully that will get things going again for you! If not, then you should contact your mobile service provider for formal support.
Or...this KB might apply:
KB34029 When attempting to send an email from the BlackBerry Z10 smartphone, the message is not sent and there is a Do Not Enter symbol to the left of the message
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

Not Able to send messages using NOKIA TEXT MESSAGE...

Hi,
I am not able to send messages using text message editor. I am having N70. I also have the latest PC suite and latest phone software. Whenever I try to send message, a message appears "Unable to send". It does not even give me the reason. I have connected my phone using data cable and I can transfer music, syncronize and do other stuffs.
Can someone suggest what needs to be done to send messages using PC??
Thanks in advance.
Raghu.

Hello,
i am having the same Problem.
I cannot send any sms via my phone (N70) nor via the latest Pc Suite. It also just says "Unable to send" with no reason.
I am on:
V5.0705.3.0.1
30-01-07
PM-84
Model: N70-1
Code: 0530495
Any help is much appreciated. :-)
Kind regards,
Thorsten
Message Edited by deeplook on 01-Jul-2008 08:59 PM

I am not able to send messages to multiple person from my iphone 5s after updating to ios 8.1.2. It shows message not delievered

I am not able to send messages to multiple person from my iphone 5s after updating to ios 8.1.2. It shows message not delievered

Hi waqaskhan91,
Thank you for visiting Apple Support Communities.
If you're not able to send text or iMessages to certain contacts after updating your iPhone, start with the troubleshooting tips in this article:
iOS: Troubleshooting Messages - Apple Support
If you only see this behavior with a few contacts, you may want to try these steps first:
If the issue occurs with a specific contact or contacts, back up or forward important messages and delete your current messaging threads with the contact. Create a new message to the contact and try again.
If the issue occurs with a specific contact or contacts, delete and recreate the contact from the Contacts app. Send a new message to the contact.
Best Regards,
Jeremy

I am not able to send messages with mail. The Send icon is dark.

I am not able to send email. The send icon is dark. all other systems seem ok.

Can you clarify what computer is giving problems? Your equipment line:
iMac DV (Slot Loading), Mac OS X (10.5.8)
has some mutailly exclusive info, in that a iMac DVD Slot loader is a G3 that cannot run Mac OS 10.5.8. The OS version sets the Mail version so figuring that out may help us get you going faster.

Migrated users not able to send messages to other internal domain

We are currently going through a domain migration and are having trouble with Lync 2010 and 2013. In particular messages between the Old Domain and New Domain. The appropriate trusts have been established between the two, but when either user (Old domain
or new) tries to message someone from the other domain the common "We couldn't send this message because we couldn't find USER" error occurs. The
users are able to search and find each other (We use GAL for this not Outlook Contacts), but messages don't go through.
Thanks.

Can you provide a bit more detail?
Are the two domains in the same forest or separate forests? Are you using different sip domains as well? Are the two lync pools federated via their edge servers?
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications

Not able to send message - http post from MII 12.1.4.53 to PI 7.1

Hi ,
Question
u2022     Is there any configuration to set up in MII and PI to do posting to PI as a web service? If YES, please guide.
Situation
u2022     We are with MII version 12.1.4.53 and trying to send message through http post to PI 7.1 server.
u2022     We are getting the following error HTTP 500 Internal Error Issue.
u2022     However we are able to post messages from SOAPUI through the same URL and with the MII system which is running on version 12.1.6.91 and 12.1.9.116
u2022     HTTP Response received as below points to PI Configuration issue.
Error
    <SOAP:Fault>
      <faultcode>SOAP:Server</faultcode>
      <faultstring>Server Error</faultstring>
      <detail>
        <s:SystemError xmlns:s="http://sap.com/xi/WebService/xi2.0">
          <context>XIAdapter</context>
          <code>ADAPTER.JAVA_EXCEPTION</code>
          <text><![CDATA[
com.sap.aii.af.service.cpa.CPAObjectNotFoundException: Couldn't retrieve inbound binding for the given P/S/A values: FP=senderService;TP=;FS=null;TS=;AN=null;ANS=null;
thanks
Rajesh

Hi Anudeep,
The question isNOT ABOUT the format of the URL which MII should use.
Using the same URL we are able to post the message from other MII versions with in the landscape( MII version 12.1.6 and MII version12.1.9) and through SOAP UI.
500 Internal server error Problem arises when the message is sent through the same URL from MII 12,1.4 Build(53) to PI 7.1 ( we tried https Post, XI Webservice, WebService action blocks)
Question:
Are thre any configuration settings specific to MII version12.1.4 Build 53 which needds to be set in MII to communicate to PI 7.1.
Thanks
Rajesh

Others not able to send mail to my account

I have manually entered all the information as my hosting website has provided and I am able to send mail but others are not able to sen mail to me.
The following message occurs every attempt to send to my account:
Delivery to the following recipient failed permanently:
[email protected]
Technical details of permanent failure:
Google tried to deliver your message, but it was rejected by the server for the recipient domain microciderco.com.au by aspmx.l.google.com. [2607:f8b0:400d:c00::1a].
The error that the other server returned was:
550-5.1.1 The email account that you tried to reach does not exist. Please try
550-5.1.1 double-checking the recipient's email address for typos or
550-5.1.1 unnecessary spaces. Learn more at
550 5.1.1 http://support.google.com/mail/bin/answer.py?answer=6596 i68si5152525qgd.15 - gsmtp

Well the domain passes most standard checks. http://www.dnsstuff.com/tools#dnsReport|type=domain&&value=microciderco.com.au
Google, whom I assume are your hosts are emphatic when I send mail to that address that the address simply does not exist. So I think you need to revisit that part of your domain setup. perhaps create a couple of other addresses and see if they play nice.

Not able to send messages using Mail

the message comes up is that "the connection to your outgoing mail server on port 25 timed out". I have followed the instructions of deleting the account and creating it again - that did not solve the problem. The outgoing server that's being used is "smtp.mac.com"
Just wondering if anybody knows what the issue could be.
Your help will be greatly appreciated

JSCAPE is know for Telnet, FTP, rlogin, etc. Java components. They also have other usefull components for applications that needs to access accross the network. They have provided me the solution and the same follows. I thought if anybody has similar problems they can have the solution.
http://www.jscape.com
I in the process of devloping a Java based Web Mail system as a frontend for MS Exchange Servers. If anybody is intersted in the code please let me know. [email protected]
Dear Nanda,
Thank you for your email. It is possible that your regular email client is configured to delete the messages from the POP3 inbox after they have been retrieved. Try the following.
1. Send an email message to your mail address.
2. Close your email client before your email client retrieves the message.
3. Using the iNet Factory classes attempt to login to the POP3 mailbox and retrieve your mail. Depending on how long it takes to send the mail through your SMTP server this may take a few tries before you get a message back.
Alternatively you can disable the automatic deletion of email messages in your email client. If you are using MS Outlook you can do this from the main menu as follows:
Tools | Accounts | Select Account | Properties | Advanced
Check the box "Leave a copy of messages on server".
This will leave the message on the server X days after you download the email from your Outlook client.
Hope this helps. Please let me know if I can be of further assistance.
Best Regards,
Van Glass
JSCAPE

Receiving many emails in my inbox that say mail delivery system and I'm not able to send messages now.

I'm receiving a number of emails that say " mail delivery system", and they are not in my sent items. So I've tried to do the virus scan and nothing is coming up. Now the "real" emails I need to send to clients are not going through because I've used up all my space and or number of emails for one day. Please help!

what you are seeing is backscatter http://en.wikipedia.org/wiki/Backscatter_%28email%29
There is nothing anyone can do about it.

I have OS X version 10.9.4 and I am not able to send email to AOL accounts.

It looks as though the emails to AOL accounts are sending...they are in my sent box. But the recipients aren't receiving the emails. Why?

Have you done what the message told you to do?
Go to your applications, find Reader, open it, agee to the EULA.

TS3899 I have just set up an exchange email account and am not able to send emails, but I can receive. I have the exact same email account set up on my older IPad and it works fine. The account also works fine on my I phone. The new IPad was set up by my

I have just added an exchange email account to my new IPad2. I am able to receive emails but I am not able to send messages from this account. I have the exact same account set up on my Old IPad and iPhone and am ble to send and receive. My work (where the server for this account is) gave me the IPad and set up the apple account. What am I missing?

You might want to try removing they email account and setting it back up again

Not being able to send messages from any of the messaging apps iPhone 3gs

I have tried resetting the phone a couple of times, including a reboot , swithcing off the phone etc. But Im just not able to send messages on Whatsapp, Couple or anything of the sort. Im not facing problems while receivig emails, but NONE of my messaging applications work!
Btw I upgraded to IOS 6 last week.
Also is there a way I can downgrade?
Any way I can fix this?
This will be my last iphone, if Im not able to fix this soon.

iOS: Troubleshooting Messages - Apple Support

I am not able to send sms to certain contacts from my iphone5

hi
iam not able to send message to certain contacts from my iphone5

Hi sri_sr,
If you are unable to send SMS messages to certain contacts, we may need to check a few things:
iOS: Troubleshooting Messages
http://support.apple.com/kb/TS2755
If you still can't send or receive SMS or MMS messages
- See the iPhone Troubleshooting Assistant.
- Verify that every phone number in your contacts list includes an area code.
- When sending to existing contacts, ensure that your contacts include the full phone number, and not just the information needed to dial locally.
- If you have recently ported your number from another carrier, please contact your current carrier to verify that the porting process has completed successfully.
Thanks,
Matt M.

My wife and I share the same email address and Apple ID. We are not able to send and receive Text Messages to one another.

My wife and I share the same email address and Apple ID. We are not able to send and receive Text Messages to one another. Is the cause of this because we share the same Apple ID? Will we have to set up 2 separate primary email addresses to be able to send and receive Tex Messages to one another? Like I said, we share the same email address and woul like to keep it that way to keep up with our email together. Is there a way to by-pass having to set up 2 primary emaill addresses if this is the problem?
Thanks.

go to the settings and turn off imessage
but that don't change the issue that you will never be able to facetime eachtoher
the appleID is really meant as the handle that identify you it was not meant to be shared
but can see that people may want to do not buy apps more then once

Hello! Im having problems about my Iphone showing NO SERVICE on top. Im not able to send and receive msg, same with calls

Hello Guys! I hope someone could help me, Im having trouble with my phone's signal, I am not able to send and receive msgs, same as make calls and receive calls. At first, my phone is working fine (iphone 4, iOS 7.0.4) and all of a sudden, my text messages are not getting through, and I noticed that my phone shows NO SERVICE, I refreshed the phone by turning it off and turning it on after a couple of minutes, it worked. My phone is okay again after that, Im able to send and receive messages again. But after few hours, the problem came again. NO SERVICE sign is displayed again, but this time after refreshing the phone nothing good happened. I tried almost every possible thing I can to fix it but it doesn't work. What should I do.
Thank you

Hey Clara,
These are the recommended troubleshooting steps to resolve No Service issues on iPhone:
Toggle airplane mode: Tap Settings > Enable Airplane Mode, wait five seconds, then turn off airplane mode.
Turn iPhone off and then on again.
Remove the SIM card and verify that it's a valid, carrier-manufactured SIM. Also verify that it isn't damaged, worn, or modified. Then reinsert it.
Check for a carrier-settings update. Connect to a Wi-Fi network. Then tap Settings > General > About. If an update is available, iOS will ask you if you want to install it. If Wi-Fi isn't available, connect your device to iTunes.
Update your iPhone to the latest version of iOS.
Reset network settings by tapping Settings > General > Reset > Reset Network Settings. This will reset all network settings, including Bluetooth pairing records, Wi-Fi passwords, VPN, and APN settings.
Restore the iPhone.
If you are outside the United States, please also follow these steps:
Go to Settings > Carrier > Automatic.
If the phone registers any carrier network, Settings > Carrier will be present.
If the Carrier option is missing in Settings and you are outside of the Unites States, please contact Apple for support and service options.
Set the option for Automatic to off.
A list of potentially available carriers appears after about two minutes. If the device is locked to a carrier, it may connect only to the carrier network to which it is locked. If the device displays carrier networks, then the device is working as expected.
Set Settings > Carrier > Automatic back to on.
If you're still experiencing No Service issues, contact your carrier to check for any network or account issues that could cause these symptoms.
from: iPhone: Troubleshooting No Service
http://support.apple.com/kb/TS4429
Welcome to Apple Support Communities!
Take care,
Delgadoh

Q10 not able to send messages to same account

Similar Messages

Maybe you are looking for