Q10 not coming on after latest update

Just updated my blackberry Q10 with the lastest update from blackberry now my phone is not coming on, tried several restarts but nothing, it just shows the blackberry logo, please can someone help me with this?

Mine showed "Blackberry" for maybe 6 or 8 minutes, then the purplish logo for another minute or two ...then came back to life.
How long have you waited before forcing a reboot, or removing the battery?

Similar Messages

Could not open itunes after latest update

Could not open Itunes after latest update. Any sloutions??

iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iTunes for Windows: iTunes can't contact the iPhone, iPad, or iPod software update server
http://support.apple.com/kb/ts1814
iTunes for Windows: Device Sync Tests
http://support.apple.com/kb/HT4235
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
http://support.apple.com/kb/ts4062
iOS: "Not enough free space" alert when trying to sync
http://support.apple.com/kb/ts1503
 Cheers, Tom

Home Button not working properly after latest update

After installing the latest update on my Iphone 4S, the home button immediately started to give me problems. It works sporadically. Sometimes it allows me to close apps when I tap it twice, sometimes it won't do anything, sometimes it will go to the negative effect. This was not an issue prior to the latest update. I have version 7.1. Has anyone found a repair for this?

So did you have a similar issue before upgrading to iOS 7.1? This can also be a hardware issue which you didn't have before.To be sure, get your home button checked top you're nearest Apple store.If you still have the problem, then this may have been caused by a bug.to report the bug, go to this site: apple.com/feedback/iphone.html.The iPhone team may even contact flute further details from you.

Alpha Channel in .psd or png not printing correctly after latest update.

Hi all,
Just noticed this yesterday. I've been searching for an answer but to no avail. Let me first say that everything works as expected in CS4. But CS5 fails to print correctly. It looks fine on screen and in print previews. I've tried trashing the preferences etc. I'm running Master suite on Vista 64 bit with dual quad processors and 25 gigs of memory. An HP Z800.
To replicate the problem simply open Photoshop and create a document any size, here we'll do 5 x 7 and set to transparent. Draw on the layer. I used a hard edged brush and made three circles. Saved as a .psd. Open Illustrator make a new document
6 x 8. Rectangle tool draw to fit doc. Fill with default gradient. Now place the photoshop file created earlier. Looks fine on screen but when I print either to our plotters or to our laser printer the problem appears. It happens with many different files. Attached is a scan of one of the prints. You can see where the boarders of the 5 x 7 image are when all you should see is the 3 circles. The alpha is not being read by illustrator correctly when printing. All 3 of our machines running CS5 are exhibiting this behavior. Is anybody else getting this? It's a pretty big show stopper.
Thanks.

Thanks. I saw those threads but this is not that issue. I really think that this is a bug in the latest update for illustrator.

My iPhone 4 battery will not fully charge after latest update. What gives?

I updated to the latest software and now my iPhone will not charge.

After a full 8 hour charge it only shows about 40% charge. This phone worked without incident before the last two firmware updates. I use the same wall charger and Apple cord for my iPad and wife's phone (she has not updated her phone to iOs 6.0.1) and they all work great. There must be something in the new update that kills battery life. By the way, I replaced my battery less than a month ago.

Netflix will not play on my Mac anymore after latest update...HELP!!

After latest update, Netflix will no longer play. When I select a movie, it prompts me to install Microsoft Silverlight, which I have repeatedly done. Netflix claims the latest MAC update is to blame, not a Netflix issue....PLEASE, any assistance is greatly appreciated.

Create a new profile as a test to check if your current profile is causing the problems.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
Profile Backup and Restore
*http://kb.mozillazine.org/Profile_backup
*https://support.mozilla.org/en-US/kb/back-and-restore-information-firefox-profiles
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

After latest update 1 feb 2014 error msvcr80.dll was not found

after latest update 1 feb 2014 on both my desk top running vista and my lap top running xp both crashed and now itunes wont open i just get failed to star because msvcr80.dll was not found obviously i tunes has a serious bug Help
huve uninstalled from laptop and re-installed with same result

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99382)

You Tube not playing video on Firefox with Adobe Flash after latest update

You Tube and other sites are not playing video on Firefox with Adobe Flash after latest update for both. Adobe Flash is working on other sites but not You tube and those sites that may have embedded You Tube videos, I'm not sure.
Adobe Flash does not crash and no error message is showing. All that shows is a dark screen for the Flash video. Right clicking the screen shows only a non-clickable 'Movie not loaded' and the clickable link to the Adobe home page.
I have spent an hour trying things as suggested for past problems similar to this but none have helped.
I have sent sad face letting you know what I think of the latest update because of this which says pretty much the same thing as I have said here.
I have no further info but if I had some input and queries form you I might be able to provide more.

I'm not sure how to remove the 12.xxx version,. I don't understand why it is there, usually updates over wirte the old one as far as I know. I don't know where to find it.
pref .js deleted.
I could not find a user.js
I disabled hardware acceleration on one of them, not sure which and I don't remember how I did it but think it must have been on the flash.
No idea what protected mode is
no new profile, I've never done this.
Ok, did what you have said as much as I could. I have been fidgeting with things now for a couple hours. After doing a CCleaner and Registry cleanse, turning off and restarting the computer, the videos are now p-laying.
I would still like to know how to find and get rid of the duplicate Flash plug in though if you would't mind.
Thanks for the help.

After latest updates cannot stream from iPad to AppleTV

After latest updates on my New Ipad and Apple TV 2nd Generation, Canot stream video from the iPad to Apple TV.
I Can Stream from my iMac and from MacBook Pro, but not from iPad.
Any Advise?
Thanks.

Hey guys, unfortunately I've had to re-install Mountain Lion to get rid of the issue, but here's my experiences after trying many things and contacting AppleCare...
First, I had Lion and had upgraded to ML. They had me go do the following with limited success:
1) Reset PRAM (no effect)
2) Recovery Disk and repair permissions (no effect)
3) Went to system /Library and User /Library and basically we went through several attempts at removing various files from (/Library/InputMethods, /Library/LaunchAgents, /Library/LaunchDaemons") Once I had essentially removed every file and dragged it into the trash (without deleting), the issue was resolved. So, it seems to point to an application that was not fully supported or giving problems within the ML environment. The plan was to drag them one by one back and do reboot/shutdown until I could isolate the application, but rather than do that, I just did a fresh install to take out any variable that could be present from having to do a Lion/ML upgrade. I was able to put a fresh copy of ML on the computer through the Recovery partition after establishing connection to my router. Everything is working fine now.
Anyway, hope that helps some of you. It was a frustrating experience but seems to point to application issues wih the OS and not the OS itself. I think developers are still rushing to catch up with full ML support and so you might find yourself having many new updates in drivers or applications over the next month.

Open GL issue after latest updates: Missing GL version

Having issues with OpenGL after latest updates to OSX and Safari. iTunes will not display cover art and Angry Birds responds glewInit failed: Missing GL version. The is a Mac Pro with 10.7.4 and Safari 5.1.7.
Anyelse seen this? How is this fixed?

Final chapter in this saga for anyone else who experiences this.......run reparPermissions against your disks prior to upgrading. After having to rebuild the boot disk a couple of times and upgrade, had no problems with 10.7.4 but would always get Missing GL Version after Safari update. Ran DiskUtil and repaired permissions prior to Safari update and finally got it to pdate without causing GL issue.
Still working on how to not need to delete my previous backups when rebuilding machine (apparently TimeMachine always tries to create a new back sparse folder and thus may waste original space from your previous backups).
Thanks to A Brody for the suggestion about repairing disk permissions!
Edward

Leopard slow starting up after latest update

My MAC Pro is very slow starting up after latest update. Before it took 15 seconds and now takes approximately 8 or 9 minutes. There is a blank blue screen for the entire time, i have repaired disk permissions but this has not helped either. Can any one suggest anything else.

Download an appropiate utility such as Onyx, etc., and purge all caches, user and system. Also do an [SMC reset|http://support.apple.com/kb/HT1411] and a [NVRAM reset|http://support.apple.com/kb/HT1379]. When you repaired permissions, you also repared the disk itself, right?

Impossible problem after latest update of 10.5 and 10.6

Hi all,
I've an incredible problem that I'm not able to solve...:
after latest update of 10.5 (some days before SL) I noticed that mouse movement was very strange and every 10 seconds (about) the mouse acceleration speeds up and after 1 seconds turn normal. The problem repeat in infinite cycle. With 10.6 and 10.6.1 is the same.
I made also this test: I boot with Leopard DVD and tested the mouse movement on the install screen. The movement is ok but if I boot with Snow Leopard DVD the mouse movement on the install screen is wrong.
Then... this is not a problem of a software on my hard disk (my first suspect) but some difference on the driver of the mouse that on my iMac has this problem.
Someone can help me?
Thank you all

faabri
What kind of mouse are you using?
EDIT: I just saw your other post here . . .
You should include all the detail in your post here, so that
people can help you with as many facts as possible.
Message was edited by: ~Bee

After latest update Mountain Lion, fan never stop working!

Hi all
After latest update (26/9/2012 in my case) of Mountain Lion, the fan start working and never stops (Macbook pro 5,5).
Any other have sam issue?
Already tried to reboot SMC and delete everything starting from snow leopard but problem still exist!!!
Thanks.

I keep an old wired keyboard and wired mouse for just such emergencies, but that is not helping you now. There are at least a couple of things that could account for the disappearance of the Bluetooth preference pane.
There may have been a glitch in the installation.
The preference pane will not be displayed if the bluetooth transceiver was not detected when the computer started.
This may seem too obvious, but try completely powering down using the power button on your Mac mini. Wait at least 30 seconds for everything in the mini to fully discharge. While you are waiting to restart, check/replace the batteries in your wireless keyboard and mouse or trackpad. Restart using the power button on the Mac mini.
If that does not work almost anything else will require the use of a wired keyboard and mouse. For years I have kept a wired keyboard and mouse around for just such an emergency, but in a fit of spring cleaning they were discarded. I ended up having to buy a cheap USB mouse and keyboard at Radio Shack (under $20 for the pair but no command key). But, with any kind of luck, you should be able to borrow a wired keyboard and mouse to get this fixed. Once you have a functioning keyboard and mouse you could...
Be sure Bluetooth is turned ON in System Preferences
Install the OS X 10.8.4 (Combo) updater or
Boot into the recovery drive (Reboot while holding down Command + R) and reinstall OS X 10.8.4

Slowdown of safari after latest update ?

Anyone have the same problem with Safari after latest update: very slow especially when downloading images ?
MacBook Pro Retina 15"
Yosemite 10.10.3

There are many possible causes for problems with web browsing. Below are some simple steps that may help either to solve the problem or isolate the cause.
Back up all data before making any changes.
1. Restart your router and also your broadband device, if they're separate.
2. If you connect to the the router with Wi-Fi, turn off Wi-Fi and then back on.
3. If you connect with Wi-Fi and you can also connect with Ethernet, do that and turn off Wi-Fi.
4. If your browser is Safari, then from the Safari menu bar, select
          Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
and confirm. If the Downloads button (with the icon of a downward-pointing arrow) is showing in the toolbar, click it and then click Clear in the box that appears. The download history will be removed.
5. Select the Extensions tab in the Preferences window. Turn all extensions OFF and test. If there's an improvement, turn extensions back ON and then disable them one or a few at a time until you find the culprit.
6. If you're running OS X 10.10 or later, select the Search tab. Uncheck the box marked
          Enable Quick Website Search
if it's checked.
7. If you're running OS X 10.9 or later, select the Advanced tab and uncheck the box marked
          Stop plug-ins to save power
Quit and relaunch the browser.
8. Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest.
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
9. Are any other web browsers installed, and are they the same? What about other Internet applications, such as iTunes and the App Store?
10. If other browsers and Internet applications are also affected, follow these instructions and test.
11. If Parental Controls is active for any user, please turn it off and test.
12. Open the iCloud preference pane and uncheck the boxes marked Safari and Photos, if they're checked.
13. Are there any other devices on the same network that can browse the Web, and if so, are they affected?
14. If you can, test Safari on another network.
15. Start up in Recovery mode. In the OS X Utilities screen, select Get Help Online. A clean copy of Safari will launch. No plugins, such as Flash, will be available. While in Recovery, you'll have no access to your saved bookmarks or passwords, so make a note of those before you begin, if they're needed for the test.

PC freezes,blue screen etc..after latest update

hello
looks like im not the only one with BIG problems after latest updates,my problems are..
1.Pc sees ipod in my computer but itunes wont start and pc locks up when i load itunes.
2.Start itunes without ipod connected itunes works fine but when i plug ipod in pc goes to blue screen and crashes.
3.If i restart pc with ipod still plugged in pc fails to boot after p.o.s.t. just a blank screen.
3.Ipod shows 2000 tracks itunes shows 1500?
4.I had a fwe problems before latest update but now cannot do anything with either.
Should i reset ipod to factory settings, delete itunes and load from cd when i bought ipod or is there an easier option?

Boot to the Recovery Volume (command - R on a restart or hold down the option/alt key during a restart and select Recovery Volume). Run Disk Utility Verify/Repair and Repair Permissions until you get no errors. Then re-install the OS.
OS X Recovery
OS X Recovery (2)

Q10 not coming on after latest update

Similar Messages

Maybe you are looking for