Q10 Notifications do not correctly follow timezone

Hi, I'm on model SQN100-3 version 10.1.0.273 on Exchange infrastructure with no BES. When I travel between timezones, the notifications get all messed up. For example, if I create a calendar entry for 1pm EDT while in EDT it creates it in the calendar fine. If I stay in EDT, the notifications happens appropriately. If I travel to MDT after creating the calendar entry but before the notification time, when I get to the new timezone, the Q10 adjust to the new timezone and all calendar entries reflect the appropriate times (as they should). Unfortunately my notification comes two hours late. It seems the notification system is not correctly managing the timezone changes. The opposite is true. If I create a calendar entry while in MDT and then travel to EDT, the calendar adjusts, but the notification comes 2 hours early.
I travel every week and notifications are consistently wrong. This week I will try manually setting the timezone instead of using the automatic timezone setting to see if the symptoms persist. I expect they will.

Hi adventureboy,
Sorry to hear you're experiencing an issue with your Calendar notifications.
If you create the appointment using your local device Calendar (as apposed to your Exchange one) does the same notification issue occur?
When you are creating the Calendar appointment, are you manually changing the Time Zone to reflect the time or using the device Time Zone to create the appointment?
Thanks!
-HMthePirate
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Similar Messages

Notification sounds not correct

I thought I posted this earlier this week, but it's nowhere to be found, so here it goes again. I have an iPhone 5 with iOS 7, but this problem started with my iPhone 4S and has continued. All of my notifications play the correct sound, except for Facebook and Twitter. When I receive a Facebook notification, no sound at all plays (except for when I receive a Facebook message). This started after I did an iOS update (not a major one) on my 4S. I have the sound for Twitter notifications set to "Tweet," but it plays the "Tri-Tone" sound instead -- which was also the case on my old iPhone. I have gone in and changed the settings to a bunch of different tones, then back to the ones I want, but to no avail. Any help is appreciated, thanks!

Hey, were you able to come up with ANY info on this problem?
i have had this problem since i got my iphone5 in february/2013, and its continued onto my new iPhone5S.
The best i could come up with, through research and first-hand experience is that the "Facebook" and "twitter" tone options DO work, but only when it is an OUTGOING action YOU PERFORMED (ie a tweet that YOU posted, or a facebook post that YOU posted)
and since newer iphones have facebook and twitter integration, The facebook and Twitter tones also work for facebook Chat/messages that you receive, and twitter direct/instant messages that you receive.
As for the other types of notifications that you get from facebook and twitter (ie. Wall posts,being tagged in photos, twitter mentions/@replies, or notifications from people you are following{if turned on})
:::these notifications seem to fall into the same category of MOST notifications from ANY App that you download from the app store.
It seems thats MOST apps do not have a specific notification sound programmed, and ANY notifications that you have selected to receive are carried out with a "default" Apple Notification tone (which appears to be the classic Tri-Tone).
I have arrived at this conclusion because in the Settings->Sounds menu, only Device Functions are listed and thus able to have their Tone Changed.
ALSO; in Settings->Notification Center, You will notice that when you click on the various 'apps' listed:
*****'Stock' Apps (Messages, Phone, Facetime, Reminders, Calender etc.) have sub-options to change the name of the 'Sound' 's Tone (which appears there)
*****while ALL OTHER Downloaded apps only have a sub-option slider/knob to turn the 'Sound' either 'ON' or 'OFF'
Since there is no option to select a 'Tone' then it is safe to assume that the activated 'Sound' is the Device's default tone.
THEREFORE...if there is no options -WITHIN THE APPLICATION ITSELF- to change the Sound or Tone of their Notifications...the question/objective Now seems to be: How can we change our Device's default Notification Sound?
<Edited by Host>

Q10 Notifications time do not correctly follow providers timezone

Hello,
Ever since I traveled to Venezuela whos time zone is 4.5 hours Caracas time, I've had problems with the time on my Q10. I set my providers date and time automatically and it does. The problem is that all my messages in Hub arrive with a difference in time of 4 hours and a half. Also my calendar is off notifying me by 4.5 hours. I have talked to my provider and blackberry support and they say they cant help me. Has this happen to any one? Please help me

Hi adventureboy,
Sorry to hear you're experiencing an issue with your Calendar notifications.
If you create the appointment using your local device Calendar (as apposed to your Exchange one) does the same notification issue occur?
When you are creating the Calendar appointment, are you manually changing the Time Zone to reflect the time or using the device Time Zone to create the appointment?
Thanks!
-HMthePirate
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Unable to install iTunes after converting from Windows Vista to Windows 7. Am told installation was successful, then "iTunes was not installed correctly", followed by "Error 7 (Windows error 193).

Unable to install iTunes after converting from Windows Vista to Windows 7. Am told installation was successful, then "iTunes was not installed correctly", followed by "Error 7 (Windows error 193). I have my iPod plugged into my computer via USB port. What am I doing wrong?

i have the only account on my laptop so have checked and am the account administrator
i run windows 7 home premium
I have the same problem and
have followed the link uninstalling in the correct order,
then restarted as per instructions,
went to Apple to download itunes,
hit download now,
Visit the iTunes download page. Click Download Now to download the iTunes installer. When prompted, click Save (instead of Run).
did not get a save instead of run prompt
Right click on iTunesSetup or iTunes64Setup (the installer you downloaded in step 3).
If you have Windows Vista, Windows 7, and Windows 8: Choose "Run as administrator."
i can only click run as administrator from right clicking the shortcut on my desktop screen
If iTunes fails to install or repair, it might be necessary to remove components left from a previous installation of iTunes and then reinstall.
sick of doing this
at least 7 or 8 times i have re installed itunes to no avail
troubleshooting no better
please help. pulling my hair out at this stage
it was working fine until 2 days ago when i opened itunes it offered to update to 12.1
not working since i clicked yes
also i have gone to restore previous point and ffs there are no restore points before my multiple reinstalls
really dont want to have to restore factory settings

TS3212 I continue to try to install iTunes; when I attempt to open the newly installed iTunes, I receive errors that it was not correctly installed. I have followed the direction on this website, but I face the same error. Please help.

I continue to try to install iTunes; when I attempt to open the newly installed iTunes, I receive errors that it was not correctly installed. I have followed the direction on this website, but I face the same error. Please help.

latest message indicates I need Apple Application Update
With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/download.htm
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

IMusic does not work correctly following iOS5 upgrade

After updgrade to iOS 5, my iMusic app does not function correctly. The bottom row of buttons do not display (Playlists, Songs, Artists, Albums). The More button will display the options, but when selected, the screen remains blank (black). I can display the album cover and the generic music note when playing music, but otherwise the screen remains black. When I rotate from portrait to landscape, a thin brown border cuts across the landscape screen at the same width the app was in Portrait.

Rebooting/restarting has not corrected this for me. It's easily repeated. The app needs some QA testing. The only way out of the blank/black screen for me has been to force quit the app. Rebooting the pad makes no difference.

Push notifications WhatsApp not work.

Push notifications WhatsApp not work. I only receive them when I open the app. I've checked the settings on iOs and Whatsapp and all is ok. I've also updated to the latest versions. Can you help me?

I actually did, and here is the answer I received:
"When you are sent a message in WhatsApp, but are not online to receive it, WhatsApp will automatically send your message to the Apple Push Notification Service (APNS). This allows an alert containing the message to be displayed, even when WhatsApp is closed or your phone's display is off. Most often, all that is needed to resolve notification issues is to ensure that all notification settings are enabled. Review these FAQ pages for troubleshooting steps:
Notifications Troubleshooting
Connection Troubleshooting
Sending your message to APNS typically takes only a few milliseconds. Once your message is sent to APNS, any delays or failure to deliver the message as a push notification to your device are usually caused by issues with your phone or network connection. Currently, all of our systems are operating normally.
If you are using iOS 7, and are confident that you have all push notification settings enabled in WhatsApp and the iPhone Notification Center, then there is likely an issue with your phone that WhatsApp cannot resolve for you. In this case, I recommend the following steps:
Backup your entire phone to iCloud.
After the backup is complete, Erase all content and settings.
Continue setting up your phone as a new device (do not restore from the iCloud backup).
Install WhatsApp and verify that push notifications are working correctly (have someone send you a few test messages while your phone's display is turned off).
Erase all content and settings and restore from the iCloud backup. "
I tried to delete everything from my iPhone and then restore my data with the backup on my computer but it did not change anything, I still can't receive any notification, unless I open the application... However, I restored immediatly my backup cause I was afraid it wouldn't work after, but I don't really think it would change something to first start as a new device and then erase all content again and restore it.

Q10 Notifications problem

Hi everybody !
I got my new Blackberry Q10, one week ago and I am having problems with the notifications.
When I turn on my phone it's working well for a time then all stops. Notifications are not ringing, bell too, I can't see who's sending me notifications...
I have to go on the contact or in the text message to see if I got an answer from somebody...
If I turn off the phone and turn on again it's working again but just for a while and I have to turn off again and re-turn on to got new text messages....
I tried to reboot, to reinstall, to reset? nothing happen. It's really frustrating !!!

Hello Dhalster and welcome to the BlackBerry Support Community Forums.
Sorry to hear you're experiencing an issue with your sound notifications.
What software version is your BlackBerry Q10 running? Check under Settings>About>OS.
Does this seem to occur with text messaging or all messages - emails, Facebook, Twitter etc?
Are you using the standard tones or did you select custom tones?
Thanks!
-HMthePirate
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

The time showing on Cisco Unified CCX Historical Reportsare not correct

Hello,
Issue: The time showing on the Historical Reports are not correct
Error message/issue description:
While comparing the recorded calls from QM Management Destop system to the reporting system the timings on the historical reports appear to be at least an hour behind. Can these be synced to show the same times
Thanks !!
Shridhar Reddy

Hi Shridhar,
The time zone displayed in the report is either UTC or local time zone, based on the TIMEZONE settings in hrcconfig.ini. You can also change the time zone for each report as shown in the procedure.
Note: When a report shows date and time information for an event or an activity in the report data, that date and time is based on the TIMEZONE configuration in hrcconfig.ini.
The Start and End time is also based on the TIMEZONE configuration in hrcconfig.ini.
The difference between the server time and the selected time zone is displayed within parentheses beside the Start and End time.
The report generated time displayed at the bottom of the report is the local time of the HR client machine.
To change the time zone for a particular report, follow these steps:
Procedure:
Step 1: In the Unified CCX Historical Reports main window, choose the report settings that you want.
Step 2: Choose the Settings menu.
Note: You notice the check mark beside the Use UTC Time Zone for Reports menu option. This depends on the configuration in hrcconfig.ini.
If UTC time zone (value 1) is configured, the check mark is displayed. If local time zone (value 0 - Default) is configured, the check mark is not displayed. For more details, refer The hrcConfig.ini Configuration File, page 2-13.
Step 3Click Use UTC Time Zone for Reports to select or unselect the option manually.
Please refer the section "The hrcConfig.ini Configuration File" from page 33 onwards in the below link,
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_8_5/user/guide/uccx85hrug.pdf
Also please refer the below thread for changing time zone.
https://supportforums.cisco.com/thread/2145833?tstart=0
Hope it helps.
Anand
Pls rate helpful posts !!

[PI 7.11 SP3] PI components not correctly registering themselves after AS restart

Hi Experts,
We have planned a system backup shutdown and restart every night for our PI environment.
In a random manner, some PI components as XI AF or Integration Directory are not correctly registered to SLD after that restart : for example, Integration Directory registers but it is not assigned to a PI domain.
It is good to mention that PI instance is actually using its own SLD (local SLD) for registration.
When the problem occurs, I follow sap note 1117249 to manually register PI components within SLD and this solves the issue.
But the definitive solution will be to avoid incomplete SLD registration at restart … But I have not yet found any sap note for that kind of solution.
Il someone can help J
Thanks a lot
Nadir

Hey Caio,
Thanks for the response but it doesn't actually answer my question. But to that point, for a "basic" PI post install, which of the NWA config tasks would you run other than the "initial config" ? And would you run them BEFORE you updated the SLD content (cimsap/CRDelta) ?
NW: PI - AS ABAP (Basic Configuration for Idoc, Proxy): Maintain
PI Adapter Engine in JPR Mode
PI Demo Client
PI Full Qualified Host Name
PI Self Test for NetWeaver
PI SLD Self Registration
Specifically, I did the SAPINST - ABAP/JAVA patches - Client copy - and THEN the initial config wizard (Setup a new local SLD, ). Also, during the initial config, I clicked the box marked "This SLD will be used as a name server for development" and my PI server hostname was already in the box marked "object server name". This config took about 30 minutes. I didn't see any errors or warnings. although I didn't view the log. I did go into Java JEE services and Filter for Services with name "XPI". All were green.
THEN I tried to update the SLD content.
any thoughts appreciated.
NICK

Muse is NOT Working, Illustrator Update FAILS, Apps list is NOT Correct. What Do I Do?

I started having issues with CC a couple months ago out of no where. Mostly just with updates from CC for the apps.
I did the suggested re-installs of CC and then had to try to update by fully re-installing apps and I had funciontality but errors trying to update Illustrator and most of the installed apps did not show up in the CC interface.
Now I try to do a quick update to a site thru Muse and it tells me that it would not validate my subscription and would be canceled in 2 days.
I again followed instructions on Adobe to delete a couple of folders and try to re start Muse.
Now I get an unexpected error and cnont use the program.
I test out CC for updates and the Muse app shows up to date, Bridge app surprisingly updated fine, and as expected, once again, Illustrator errors out on the update and still my CC app list is not correct so I honestly dont know what updates I have to do on the other programs.
I checked my subscription details and everything is fine.
Not having the ability to update efficiently from CC is not a huge deal as long as I can use the programs to work. Not being abel to work because of some programing hiccup is NOT ACCEPTABLE.
Anybody have any possible paths to fix these latest issues?
Should I start by wiping the machine clean of any installs and then completely try to re-install everything?
what a pain.

UPDATE:
I got home tonight and tried to open up Muse.
This time it opened up the login screen and actually made it past the point it errored at previously.
Illustrator update stilll gives an Error 8.

UWL Notification is not getting displayed under Notificattion TAB

Hi experts,
I have a requirement to Display the notification Under "NOTIFICATION" tab in UWL.
For that I followed the below steps:
1) Deployed required SDA as well as par file.
2) Created the new connector picking the Somic Connector from the drop down and requires system alies name
3) Restart the EP server
Still notification is not coming even through it is present in back-end
When I checkedthe Connection status Iview by clicking the display connection ,the Som connctor is not been displayed.
Can you please give any advice, what exactly the issue related to connector?
Thanks,
JB
Edited by: jyoti behera on May 16, 2011 9:30 PM
Edited by: jyoti behera on May 16, 2011 9:31 PM
Edited by: jyoti behera on May 17, 2011 7:23 AM
Edited by: jyoti behera on May 17, 2011 6:11 PM

Hi Jyoti,
Can I mark this thread as closed for you? If so do you first want to share how you solved the issue so other individuals who are searching the forum can also find the advice helpful?
Beth Maben
EP - Senior Support Consultant
AGS Primary Support, Business Suite & Technology
Please see the UWL Wiki @
http://www.sdn.sap.com/irj/scn/wiki?path=/display/bpx/uwl+faq ***

TS4123 This is not correct solution. I have fresh copy of Windows 7 64 bit and I have the same problem. Autorun only shows the Bonjour service. It started when try to sync more than one iphone.

This is not correct solution. I have fresh/new copy of Windows 7 64 bit and I have the same problem.
Autorun only shows the Apple Bonjour service. It started when try to sync more than one iphone over WiFi. I have two iphones and an iPad. I turned off syncing over WiFi and still has high CPU utilization. One of the CPU's is pegged at 100%. It is the AppleMobileDeviceService.exe process.

For the record, I then followed the suggestion of MarcDCMB in https://discussions.apple.com/thread/4291206 of just manually restarting the Apple Mobile Device service in Windows services.msc once each time after starting iTunes and the service no longer hogs CPU after that service restart. Not too painful as a work-around, and apparently an effective one, but clearly not a solution to the problem. Again, as above, all the other solutions didn't work for me and I have no conflicting software as far as I can tell. So you'd have to say this Apple's problem.
Also FTR, I am still on the 5.2.0.6 version of the Apple Mobile Device Support MSI and I don't know if that is relevant to this work-around working but my sense is that it is NOT relevant. I'll report back on this thread if I re-upgrade and the problem returns in spite of the service-restart approach.

Sharepoint server issue:: Register Managed Account -Password supplied with username was not correct

when i am creating a managed account from share point server admin it is showing:-
The password supplied with the username fimservice was not correct. Verify that it was entered correctly and try again.
i have put correct password but even though it is showing this error.
i have even tried to enter username with my domain name like indialab1\fimservice but this account is not being
recongnized.
Thanks for your help

Additionally you can follow / refer steps mentioned in
http://blogs.technet.com/b/seanearp/archive/2011/01/25/updating-passwords-on-sharepoint-2010.aspx
Let us know your results
Regards,
Pratik Vyas | SharePoint Consultant |
http://sharepointpratik.blogspot.com
Posting is provided AS IS with no warranties, and confers no rights
Please remember to click Mark As Answer if a post solves your problem or
Vote As Helpful if it was useful.

Tomahawk1.1.3 ugrade exception...ExtensionsFilter not correctly configured.

Hi Experts,
I new to the world of JSF and im presently playing around with MyFaces Tomhawk implementation.
I tried the tree example using tomahawk.jar ,myfaces-api and myfaces-impl.
I was able to get the tree working with these version of jars.
But now when i upgraded to the latest jars i.e
myfaces-api 1.1.3
myfaces-imple1.1.3 and
tomahawk-1.1.3
I'm getting the following error...see the stack trace below:
java.lang.IllegalStateException: ExtensionsFilter not correctly configured. JSF mapping missing. JSF pages not covered. Please see: http://myfaces.apache.org/tomahawk/extensionsFilter.html
org.apache.myfaces.renderkit.html.util.AddResourceFactory.throwExtensionsFilterMissing(AddResourceFactory.java:371)
org.apache.myfaces.renderkit.html.util.AddResourceFactory.checkEnvironment(AddResourceFactory.java:333)
org.apache.myfaces.renderkit.html.util.AddResourceFactory.getInstance(AddResourceFactory.java:288)
org.apache.myfaces.custom.tree2.HtmlTreeRenderer.encodeJavascript(HtmlTreeRenderer.java:611)
org.apache.myfaces.custom.tree2.HtmlTreeRenderer.encodeBegin(HtmlTreeRenderer.java:152)
javax.faces.component.UIComponentBase.encodeBegin(UIComponentBase.java:512)
I googled for this also did the required changes.
here are the links i visited.
1) http://wiki.apache.org/myfaces/Upgrading_to_Tomahawk_1.1.3
2) http://www.mail-archive.com/[email protected]/msg23110.html
3) http://www.mail-archive.com/[email protected]/msg23094.html
Here's my web.xml
<?xml version="1.0" encoding="UTF-8"?>
<web-app version="2.4" xmlns="http://java.sun.com/xml/ns/j2ee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee
http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd">
<context-param>
<param-name>javax.faces.STATE_SAVING_METHOD</param-name>
<param-value>client</param-value>
</context-param>
<context-param>
<param-name>org.apache.myfaces.ALLOW_JAVASCRIPT</param-name>
<param-value>true</param-value>
</context-param>
<context-param>
<param-name>org.apache.myfaces.DETECT_JAVASCRIPT</param-name>
<param-value>false</param-value>
</context-param>
<context-param>
<param-name>org.apache.myfaces.PRETTY_HTML</param-name>
<param-value>true</param-value>
</context-param>
<context-param>
<param-name>org.apache.myfaces.AUTO_SCROLL</param-name>
<param-value>true</param-value>
</context-param>
<context-param>
<param-name>javax.faces.CONFIG_FILES</param-name>
<param-value>/WEB-INF/faces-config.xml</param-value>
</context-param>

<listener>
<listener-class>org.apache.myfaces.webapp.StartupServletContextListener</listener-class>
</listener>

<filter>
<filter-name>MyFacesExtensionsFilter</filter-name>
<filter-class>org.apache.myfaces.webapp.filter.ExtensionsFilter</filter-class>
<init-param>
<param-name>maxFileSize</param-name>
<param-value>20m</param-value>
</init-param>
</filter>

<filter-mapping>
<filter-name>MyFacesExtensionsFilter</filter-name>

<url-pattern>*.jsp</url-pattern>
</filter-mapping>

<filter-mapping>
<filter-name>MyFacesExtensionsFilter</filter-name>
<url-pattern>/faces/myFacesExtensionResource/*</url-pattern>
</filter-mapping>

<servlet>
<servlet-name>Faces Servlet</servlet-name>
<servlet-class>javax.faces.webapp.FacesServlet</servlet-class>
<load-on-startup>1</load-on-startup>
</servlet>
<servlet-mapping>
<servlet-name>Faces Servlet</servlet-name>
<url-pattern>*.faces</url-pattern>
</servlet-mapping>
</web-app>
Please help me out in fixing this exception.....im sure lot of people must have encountered this exception.
Thanks
Ved

Hi,
I have made some changes and it is now working.But i want it work in a portlet.There it is showing the text box but not the pop up button.It works fine as a stand alone application.How can i resolve this??
My code is as follows...
<?xml version="1.0" encoding="UTF-8"?>
<web-app id="conference-room" version="2.4"
     xmlns="http://java.sun.com/xml/ns/j2ee"
     xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
     xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd">
     <display-name>Conference Room</display-name>
     <context-param>
          <param-name>
               org.apache.myfaces.CHECK_EXTENSIONS_FILTER
          </param-name>
          <param-value>false</param-value>
     </context-param>
     <context-param>
          <param-name>javax.faces.STATE_SAVING_METHOD</param-name>
          <param-value>server</param-value>
     </context-param>
     <context-param>
          <param-name>javax.faces.application.CONFIG_FILES</param-name>
          <param-value>/WEB-INF/faces-config.xml</param-value>
     </context-param>
     <context-param>
          <description>
               This parameter tells MyFaces if javascript code should be
               allowed in the rendered HTML output. If javascript is
               allowed, command_link anchors will have javascript code that
               submits the corresponding form. If javascript is not
               allowed, the state saving info and nested parameters will be
               added as url parameters. Default: "true"
          </description>
          <param-name>org.apache.myfaces.ALLOW_JAVASCRIPT</param-name>
          <param-value>true</param-value>
     </context-param>
     <context-param>
          <description>
               This parameter tells MyFaces if javascript code should be
               allowed in the rendered HTML output. If javascript is
               allowed, command_link anchors will have javascript code that
               submits the corresponding form. If javascript is not
               allowed, the state saving info and nested parameters will be
               added as url parameters. Default: "false"
               Setting this param to true should be combined with
               STATE_SAVING_METHOD "server" for best results.
               This is an EXPERIMENTAL feature. You also have to enable the
               detector filter/filter mapping below to get JavaScript
               detection working.
          </description>
          <param-name>org.apache.myfaces.DETECT_JAVASCRIPT</param-name>
          <param-value>false</param-value>
     </context-param>
     <context-param>
          <description>
               If true, rendered HTML code will be formatted, so that it is
               "human readable". i.e. additional line separators and
               whitespace will be written, that do not influence the HTML
               code. Default: "true"
          </description>
          <param-name>org.apache.myfaces.PRETTY_HTML</param-name>
          <param-value>true</param-value>
     </context-param>
     <context-param>
          <description>
               If true, a javascript function will be rendered that is able
               to restore the former vertical scroll on every request.
               Convenient feature if you have pages with long lists and you
               do not want the browser page to always jump to the top if
               you trigger a link or button action that stays on the same
               page. Default: "false"
          </description>
          <param-name>org.apache.myfaces.AUTO_SCROLL</param-name>
          <param-value>true</param-value>
     </context-param>
     
     <filter>
          <filter-name>extensionsFilter</filter-name>
          <filter-class>
               org.apache.myfaces.component.html.util.ExtensionsFilter
          </filter-class>
          <init-param>
               <description>
                    Set the size limit for uploaded files. Format: 10 - 10
                    bytes 10k - 10 KB 10m - 10 MB 1g - 1 GB
               </description>
               <param-name>uploadMaxFileSize</param-name>
               <param-value>100m</param-value>
          </init-param>
          <init-param>
               <description>
                    Set the threshold size - files below this limit are
                    stored in memory, files above this limit are stored on
                    disk.
                    Format: 10 - 10 bytes 10k - 10 KB 10m - 10 MB 1g - 1 GB
               </description>
               <param-name>uploadThresholdSize</param-name>
               <param-value>100k</param-value>
          </init-param>
     </filter>
     
     <filter-mapping>
          <filter-name>extensionsFilter</filter-name>
          <url-pattern>*.jsf</url-pattern>
     </filter-mapping>
     <filter-mapping>
          <filter-name>extensionsFilter</filter-name>
          <url-pattern>/faces/*</url-pattern>
     </filter-mapping>
     
     <listener>
          <listener-class>
               org.apache.myfaces.webapp.StartupServletContextListener
          </listener-class>
     </listener>
     
     <servlet>
          <servlet-name>Faces Servlet</servlet-name>
          <servlet-class>javax.faces.webapp.FacesServlet</servlet-class>
          <load-on-startup>1</load-on-startup>
     </servlet>
     
     <servlet>
          <description>
               MVC Servlet for Jetspeed Portlet Applications
          </description>
          <display-name>Jetspeed Container</display-name>
          <servlet-name>JetspeedContainer</servlet-name>
          <servlet-class>
               org.apache.jetspeed.container.JetspeedContainerServlet
          </servlet-class>
          <init-param>
               <param-name>contextName</param-name>
               <param-value>conference-room</param-value>
          </init-param>
          <load-on-startup>0</load-on-startup>
     </servlet>
     
     <servlet-mapping>
          <servlet-name>Faces Servlet</servlet-name>
          <url-pattern>*.jsf</url-pattern>
     </servlet-mapping>
     <servlet-mapping>
          <servlet-name>JetspeedContainer</servlet-name>
          <url-pattern>/container/*</url-pattern>
     </servlet-mapping>
     <welcome-file-list>
          <welcome-file>index.html</welcome-file>
          <welcome-file>index.htm</welcome-file>
          <welcome-file>index.jsp</welcome-file>
          <welcome-file>default.html</welcome-file>
          <welcome-file>default.htm</welcome-file>
          <welcome-file>default.jsp</welcome-file>
     </welcome-file-list>
</web-app>
Thanks and regards,
Gaurav Goel.

Q10 Notifications do not correctly follow timezone

Similar Messages

Maybe you are looking for