Q10 restarting/rebooting after minor bumps/shocks

Anyone else having the issue with the Q10 restarting when its bumped at just the right spot? Its gotten to the phone where I can tap it with my finger on the back at a certain spot and it will reboot. I'm pretty delicate with phones and have never had this issue with past Blackberrys. It was a major pain in the azz to configure this phone and I generally like the phone. I really want to avoid having to exchange it.
Any advice? Thanks!

I haven't had this issue but am curious if the spot you tap is near the battery. Perhaps put a piece of paper under the battery to see if it still happens. If it stops you know that you've found a way to basically do a quick battery pull.
Another thought would be to get a case, which will both protect your Q10 investment and likely prevent it from restarting like that.
All that said, I would try to find another Q10 and see if you can do the same thing with the magic spot, if you can't, return yours for exchange or repair under the warranty.
Twitter: @sheldonbk

Similar Messages

BB z10 restarting/rebooting after minor bumps/shocks

Anyone else having the issue with the Z10 restarting when its bumped at just the right spot? Its gotten to the phone where I can tap it with my finger on the back at a certain spot and it will reboot. I'm pretty delicate with phones and have never had this issue with past Blackberrys. ,
due to various other problems this is my 3rd replacement handset , i dont want to replace it again , each time have to get a new screen protector !
Any advice? Thanks!

It could be a loose battery, open the back and wedge a small piece of folded paper at the bottom of the battery for a tighter fit, (not the top where the contacts are).
You really should have it replaced if it is still under warranty.

ODI Agent after Restarting/Rebooting Server

Hi All,
How can ODI Agent executes after we Restart/Reboot our Servers?
Thanks,
Randy

If you are using Windows machine then you can set up ODI Agents as Windows Services .
Metalink Note 423712.1 can be helpful in this case .
Once the ODI Agents is running as Windows Services , you can specify the service startup type as Automatic.
So when your windows server gets restarted , ODI agent service will also start.
If you are using Unix based system then create a script that contains the agent.sh/agentscheduler.sh
Specify all required parameter .
Then get in touch with your system admin and place the script inside the folder
which contains all the start-up scripts .

3gs reboots after 4mins on calls and shows battery dead then shows battery charged on restart any 1 have a fix please

3gs reboots after 4mins on calls and shows battery dead then shows battery charged on restart any 1 have a fix please

Thought it had worked but soon found out it had not.
after further days of trying finally, solved it for me Yesterday.
turned off notifications when locked, and bingo, wow.
i have not turned off iCloud but location services are also off.
best thing to do I found was keep checking your usage, settings, general, usage, and flip down to bottom, if the standby and usage are similar there is a problem, if there is a big difference then all is ok. Just keep turning things off and on until the difference is very apparent.
something on my phone was keeping the phone alive even when turned off, and I think this was the phone repeatedly trying to update continually.
to me this is definitely down to the iOS, my wife has exactly same phone and iOS but hers doesn't have any problem and the battery lasts for days.
the guy at the Genius Bar told me to restore the phone via iTunes, not iCloud. This is because iCloud remembers the exact info from your phone and simply reinstates it when you restore, and this includes the iOS too.
when I get home from holidays that's what I'll do, or wait for iOS 8 in few weeks. But I'm so pleased I finally made it work, I was beginning to think ditch the phone and buy Samsung.
anyway anyone out there please try my final solution and let me know if it works for you?

SSRS 2008 R2 Services not restarting automatically after reboot

SSRS 2008 R2 Reporting instance not restarting automatically after patches install. Is there a way to resolve the issue
Windows 2008 R2 Server
16 GB RAM

Hi,
Follow this article to resolve the issue:
Reporting Services service doesn't start after the installation of MS12-070 security patch
http://blogs.msdn.com/b/mariae/archive/2012/11/12/reporting-services-service-doesn-t-start-after-the-installation-of-ms12-070-security-patch.aspx
Workaround 1:
Modify the registry to increase the default time-out value for the service control manager. To increase this value to 60 seconds, follow these steps:
1. Click Start, click Run, type regedit,and then click OK.
2. Locate and then click the following registry subkey:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control.
3. In the right pane, locate the ServicesPipeTimeout entry.
Note If the ServicesPipeTimeout entry does not exist, you must créate it. To do this, follow these steps:
a.On the Edit menu, point to New, and then click DWORD Value.
b.Type ServicesPipeTimeout, and then press ENTER.
c.Right-click ServicesPipeTimeout, and then click Modify.
d.Click Decimal, type 60000, and then click OK.
This value represents the time in milliseconds before
Restart the computer for the changes to take effect. Check that SSRS services can be started now.
You cannot start SQL Server Reporting Services after you apply the update that is discussed in KB 2677070
http://support.microsoft.com/kb/2745448/en-us
Thanks.
Tracy Cai
TechNet Community Support

Fix for continuous reboot after installing Service Pack 3 in Windows XP

After contacting HP Technical Support and speaking to a supervisor we were able to solve the problem of Windows continuously rebooting after installing SP3. Here are the steps that fixed the problem with my HP Pavilion running on an AMD processor. The steps are actually fairly straight forward and easy....
Issue: The computer reboots continuously after installing Windows XP service pack 3
Computer reboots continuously after installing Windows XP service pack 3 on AMD systems. The problem is that with some configurations, SP3 causes the computer to crash during boot, and Windows XP, by default, is set up to automatically reboot when it crashes. That is why you end up in the endless rebooting scenario.
Cause:
On HP computers, the same Windows installation disc image for Intel processor based PC's is deployed for the AMD processor based computers as well. Because the original installation image for both Intel and AMD is the same, all have the intelppm.sys driver installed and running. That driver provides power management on Intel-based computers. On an AMD-based computer, amdk8.sys provides the same functionality for power management.
Symptoms:
Ordinarily, having intelppm.sys running on an AMD-based computer appears to cause no problems. However, on the first reboot after a Service Pack 3 installation, it causes a big problem. The computer either fails to boot, or crashes with a STOP error code of 0x0000007e.
You may not see the error code because the computer reboots too fast. In order to get the error message, you need to set an option during startup. To do so, open the windows advanced menu by tapping the f8 key on startup. Then select the "Disable automatic restart on system failure" option.
Solution:
If you have an AMD-based computer, however, you do not need the intelppm.sys driver and can disable it. There are three methods in order to do this.
Step 1: Please try to log on the system in safe mode.
1. While using Safe mode open the command prompt.... Start, All Programs, Accessories, Command Prompt
Run the following command in the command prompt just like it's typed: sc config intelppm start= disabled
Step 2:
If the issue persists, please try to log on or boot the system in recovery console (refer to the web document)
2. Using recovery console:
If you booted into the recovery console, from a command prompt, type: disable intelppm
Step 3: Please check in registry.
3. Using windows registry:
1. Run regedit
2. Click on HKEY_LOCAL_MACHINE
3. From the File menu, select "Load hive"
4. Navigate to %systemdriver%\Windows\System32\Config on the dead system and select the file name System
5. Name it something you can remember, such as "horked"
6. Navigate to horked\ControlSet001\Services\IntelPPM
7. Double click the Start value and set it to 4
8. If you did what I did and completely messed things up by running a disk check previously, navigate to ControlSet001\Control\SessionManager. Open the BootExecute value and clear out the autochk entries.
9. Repeat steps 6-8 for the other control sets.
10. Reboot
Reference:
http://support.microsoft.com/kb/888372
Additional information:
Computer Restarts after Displaying Stop Error 0x0000007E (After Updating with Service Pack 3 for Windows XP):
http://h10025.www1.hp.com/ewfrf/wc/genericDocument?docname=c01457284&cc=us&dlc=en&lc=en&jumpid=reg_R1002_USEN
For future reference: Service pack 3 Installation steps:
Before installing the service pack 3 update, please follow the steps listed above and save yourself much time and effort.
To uninstall service pack 3, I suggest that you uninstall it from add/remove programs.
Step 1:
Uninstall service pack 3 from add/remove programs:
1. Click Start.
2. Select Run.
3. Type appwiz.cpl in the run field.
4. Click OK.
5. Click change or remove programs.
6. Select the program -service pack 3 that you want to uninstall or remove.
7. Click Remove button.
8. It will pop up the message stating that "Are you sure you want to remove the programs".
9. Click Yes. It will help you to remove or uninstall the installed programs from add and remove programs.
Step 2: If the issue persists, I suggest you to perform system restore and then try to install the service pack 3 after performing the steps mentioned above in regards to removing the intelppm.sys Driver.
Using Microsoft System Restore in Windows Me and XP:
http://h10025.www1.hp.com/ewfrf/wc/genericDocument?docname=bph07103&cc=us&dlc=en&lc=en&jumpid=reg_R1002_USEN
Step 3:
How to obtain the latest Windows XP service pack :
http://support.microsoft.com/kb/322389/
Steps to take before you install Windows XP Service Pack 3:
http://support.microsoft.com/kb/950717/en-us
I hope this helps someone who is having this problem. It sure took me a minute to get it all figured out. :0)

Still useful as of 12/30/11. Have ten Lenovo 5042 computers with downgrade licenses to run XP and have a ghosted image from another Lenovo 5042 having and Intel cpu. My target computers all have AMD cpus in them and the image would continuously reboot on
the AMD computers.
Used method 1 and it cleared the problem instantly, many thanks for the post and the time and effort it took to dig up the answer..

After minor update in mobilevoip on 24june2013, I am unable to connect mobilevoip

After minor bug update in mobilevoip on 24june2013, after that I am unable to login mobilevoip pls help

Try a reset: Simultaneously hold down the Home and On buttons until the device shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the device back on using the On button. In some cases it also helps to double click the Home button and close all apps from the tray before doing the reset.
Delete and reinstall the app
Contact the vendor.

Oracle Linux 6.4 installs, runs, and manual shutdown OK ... but restarts itself after 10 minutes or so

Hi Guys
Successfully installed Oracle Linux 6.4 operating system , which subsequently runs as expected.
When Oracle Linux 6.4 is shutdown using standard GUI system/shutdown ,
it does a clean shutdown and power-off as expected ....
UNTIL some 10 minutes or so later , when Oracle Linux 6.4 reboots all by itself from a fully powered-down state.
Likewise when Oracle Linux 6.4 is shutdown using standard command line " shutdown -h now" ,
it does a clean shutdown and power-off as expected ....
UNTIL some 10 minutes or so later , when Oracle Linux 6.4 reboots all by itself from a fully powered-down state.
Clearly it is NOT desirable to have the operating system able restart of it's own accord.
A manual shutdown is typically done for good reason , and the server should remain shutdown.
The previous version, ie Oracle Linux 6.3 did not exhibit this behavior.
When Oracle Linux 6.3 was shutdown, it stayed shutdown
Question
======
Does anyone know how to STOP Oracle Linux 6.4 from restarting itself after a successful shutdown ?
Thanks
Bruce

Does anyone know how to STOP Oracle Linux 6.4 from restarting itself after a successful shutdown ?
Assuming your network interface is eth0, execute "$ ethtool eth0", like below, and indicate what you get for the lines "Supports Wake-on" and "Wake-on.
lx04:/root $ ethtool eth0
Settings for eth0:
        Supported ports: [ TP ]
        Supported link modes:   10baseT/Half 10baseT/Full
                                100baseT/Half 100baseT/Full
                                1000baseT/Full
        Supported pause frame use: No
        Supports auto-negotiation: Yes
        Advertised link modes: Not reported
        Advertised pause frame use: No
        Advertised auto-negotiation: Yes
        Speed: 1000Mb/s
        Duplex: Full
        Port: Twisted Pair
        PHYAD: 0
        Transceiver: internal
        Auto-negotiation: on
        MDI-X: Unknown
        Supports Wake-on: pg
        Wake-on: d
        Current message level: 0x0000003f (63)
                               drv probe link timer ifdown ifup
        Link detected: yes
Then check in your BIOS (usually under APM) for any enabled power-on settings associated with PCI or PCIe bus (your NIC will use one or the other).

When i try to restart firefox after i have closed it i get a message that firefox is still running Have to restart pc most of the time. Is a big wast of time.So have been using internet explorer most of the time

I must close firefox to run a program called c cleaner to remove unused items the browser saves on the computer . In order to clean up items on firefox i must shut firefox down then have the problem when i try to restart firefox after the the unused items are removed as the pc thinks firefox is still running. Have to reboot to start firefox. Other browsers are normal with no problems

I have sometimes seen Firefox give such a message, and do not know the reason for this. As you mention Internet Explorer I assume you are using a Windows machine.
Try using task manager to stop the firefox program.
Shortcut keys [Ctrl][alt][del] in XP, all pressed together will get task manager.
Another method is in Start -> Run keying in the command "Taskmgr" and hit Return
Once TaskManager is showing click the process tab and look for "firefox.exe", right click on it and use "end process" that should stop Firefox without you needing to restart the computer.
I am not sure why you need to use'' "c cleaner to remove unused items the browser saves on the computer "''
Tools -> clear recent history, may help
You may also be interested in the [[Private Browsing]] feature.
''I have just noticed someone else posting about this article that may be of interest''
[[Firefox is already running but is not responding. ]]

Macbook Air constantly rebooting after installing Mavericks... this was my fix

Just in case this helps anyone.
I installed Mavericks on my Mac without an issue. When it restarted, my Mac would constantly reboot after a few minutes. It didn't matter if I logged in or not. I tried the various things that have been suggested (reset NVRAM, CMOS, running a disk check) but nothing help. If I booted into safe mode, I would not have any problems.
The issue ended up being some systems extensions in my /System/Library/Extensions folder. I had installed and deleted Trend Micro Smart Surfing a while ago by using the manual uninstall (move the application to the trash) which leaves the system extensions it had added intact (there was a Trend Micro folder in /System/Library/Extensions).
I reinstalled the software and then used the uninstaller that came with the program and after I rebooted, everything worked fine. I checked the /System/Library/Extensions folder and could see that the Trend Micro folder had been removed by the uninstaller.
I would suggest looking at the /System/Library/Extensions folder and comparing to what is in the applications folder. If you something in the extensions folder but not in the application one, you might be having the same type of issue that I was having.
Alex

Startup your Mac while holding down the Command + R keys so you can access the built in utilities to repair the startup disk and restore OS X using OS X Recovery.

N78 Reboots After Missed Call

Hello to everyone!I have noticed that many times,my N78 reboots after I receive a missed call.On the top right of the screen appears something like a talk bubble containing a phone icon that turns from green to orange and back.After this happens,my phone reboots.I did restore factory setting but nothing changed..I notice that this problem stops when I get the microSD out of the phone.I thought that there is a file containing virus in it..but I replaced my microSD with an empty new one but reboot goes on...Please help I cant stand the 60mb phone memory!

Hello there, Abomosa.
The following Knowledge Base article offers up some practical steps to try for troubleshooting issues with an application not performing as expected:
iOS: Understanding multitasking
http://support.apple.com/kb/ht4211
When performing Step 2, I would recommend closing all applications that are running. If you perform Step 3 and the issue persists, you may want to try resetting as well:
If an app doesn't respond to your input, or doesn't perform as expected, do the following, testing after each step:
Check for app updates.
Force the app to close.
Restart your device.
Update your iOS device.
Learn more about troubleshooting apps.
Additionally this article offers some great information for Display issues as well:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
If you find the issue is still unresolved that same article offers the following:
My issue is still not resolved. What do I do next?
Contact Apple Support.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

MBP automatic restart/reboot everyday.

I left my MBP on every night to download movies and applications . Sometimes it can last through the night without restarting/rebooting , sometimes when i wake up to see it is at the startup login screen , which means my MBP has restarted/logged out. I started leaving my MBP overnight recently and realised this error. Two days ago, i left it to download stuff and when i woke up in the morning, it was restarted and my battery life is still at 30% . Today morning , it was restarted as well with 48% battery.
Under Energy Saver, i unticked "sleep disk(s) when possible" ,ticked the rest and set duration for disk to sleep to "NEVER". Under Schedule, nothing is ticked.
It is just weird because even when sometimes i plugged in the AC adapter throughout the night, it restarts too. Also, in order not to allow the computer to auto restart, i did not allow automatic updates.
Is there any way i can solve this issue ? is it more of a hardware or software issue ?
I would want to leave my computer on for as long as possible without it switching off .
PS: i am using Leopard OSX 10.6.4 , should i update to the latest 10.6.7?
Thanks alot!

6/2/11 AM 03:15:58          com.apple.launchd[1]          (com.parallels.vm.prl_fsd[39493]) Exited with exit code: 255
6/2/11 AM 03:15:58          com.apple.launchd[1]          (com.parallels.vm.prl_fsd) Throttling respawn: Will start in 10 seconds
6/2/11 AM 03:16:08          com.apple.launchd[1]          (com.parallels.vm.prl_fsd[39494]) Exited with exit code: 255
6/2/11 AM 03:16:08          com.apple.launchd[1]          (com.parallels.vm.prl_fsd) Throttling respawn: Will start in 10 seconds
6/2/11 AM 03:16:18          com.apple.launchd[1]          (com.parallels.vm.prl_fsd[39496]) Exited with exit code: 255
6/2/11 AM 03:16:18          com.apple.launchd[1]          (com.parallels.vm.prl_fsd) Throttling respawn: Will start in 10 seconds
6/2/11 AM 03:16:28          com.apple.launchd[1]          (com.parallels.vm.prl_fsd[39500]) Exited with exit code: 255
6/2/11 AM 03:16:28          com.apple.launchd[1]          (com.parallels.vm.prl_fsd) Throttling respawn: Will start in 10 seconds
6/2/11 AM 03:16:38          com.apple.launchd[1]          (com.parallels.vm.prl_fsd[39501]) Exited with exit code: 255
6/2/11 AM 03:16:38          com.apple.launchd[1]          (com.parallels.vm.prl_fsd) Throttling respawn: Will start in 10 seconds
6/2/11 AM 03:16:42          [0x0-0x28e28e].com.google.Chrome[36620]          Handling SIGTERM in renderer.
6/2/11 AM 03:16:42          [0x0-0x28e28e].com.google.Chrome[36620]          Wrote signal to shutdown pipe.
6/2/11 AM 03:16:42          [0x0-0x28e28e].com.google.Chrome[36620]          Handling SIGTERM in renderer.
6/2/11 AM 03:16:42          [0x0-0x28e28e].com.google.Chrome[36620]          Wrote signal to shutdown pipe.
6/2/11 AM 03:16:48          com.apple.launchd[1]          (com.parallels.vm.prl_fsd[39502]) Exited with exit code: 255
6/2/11 AM 03:16:48          com.apple.launchd[1]          (com.parallels.vm.prl_fsd) Throttling respawn: Will start in 10 seconds
6/2/11 AM 03:16:58          com.apple.launchd[1]          (com.parallels.vm.prl_fsd[39503]) Exited with exit code: 255
6/2/11 AM 03:16:58          com.apple.launchd[1]          (com.parallels.vm.prl_fsd) Throttling respawn: Will start in 10 seconds
6/2/11 AM 03:16:59          com.apple.launchd.peruser.501[36429]          (com.apple.AirPortBaseStationAgent[36454]) Exited: Killed
6/2/11 AM 03:16:59          [0x0-0x279279].com.hp.HPEventHandler[36464]          on write, error=-1
6/2/11 AM 03:16:59          [0x0-0x279279].com.hp.HPEventHandler[36464]          on write, error=-1
6/2/11 AM 03:17:00          loginwindow[32759]          PScurrentwindowbounds: CGSGetWindowBounds returned error (1002)
6/2/11 AM 03:17:00          com.apple.loginwindow[32759]          Thu Jun 2 03:17:00 edgar-ang.local loginwindow[32759] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
6/2/11 AM 03:17:00          com.apple.loginwindow[32759]          2011-06-02 03:17:00.027 loginwindow[32759:107] PScurrentwindowbounds: CGSGetWindowBounds returned error (1002)
6/2/11 AM 03:17:00          com.apple.loginwindow[32759]          Thu Jun 2 03:17:00 edgar-ang.local loginwindow[32759] <Warning>: CGSShutdownServerConnections: Detaching application from window server
6/2/11 AM 03:17:00          com.apple.ScreenSharing.server[36449]          Thu Jun 2 03:17:00 edgar-ang.local AppleVNCServer[36449] <Warning>: CGSShutdownServerConnections: Detaching application from window server
6/2/11 AM 03:17:00          com.apple.ScreenSharing.server[36449]          Thu Jun 2 03:17:00 edgar-ang.local AppleVNCServer[36449] <Warning>: CGSDisplayServerShutdown: Detaching display subsystem from window server
6/2/11 AM 03:17:00          com.apple.loginwindow[32759]          Thu Jun 2 03:17:00 edgar-ang.local loginwindow[32759] <Warning>: CGSDisplayServerShutdown: Detaching display subsystem from window server
6/2/11 AM 03:17:01          com.apple.WindowServer[39507]          Thu Jun 2 03:17:01 edgar-ang.local WindowServer[39507] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
6/2/11 AM 03:17:08          com.apple.launchd[1]          (com.parallels.vm.prl_fsd[39523]) Exited with exit code: 255
6/2/11 AM 03:17:08          com.apple.launchd[1]          (com.parallels.vm.prl_fsd) Throttling respawn: Will start in 10 seconds
6/2/11 AM 03:17:18          com.apple.launchd[1]          (com.parallels.vm.prl_fsd[39524]) Exited with exit code: 255
6/2/11 AM 03:17:18          com.apple.launchd[1]          (com.parallels.vm.prl_fsd) Throttling respawn: Will start in 10 seconds
Pardon me. This was the console log i found w anomility . after which i believe my comp was restarted.. can anyone decipher why did it shut down? btw Thanks Baby Boomer, i will try out ur method and see if it restarts tonight

Ipad Generation 1 unresponsive/won't reboot after App update

My Ipad became unresponsive or it would not reboot after updating a few App's update. It would go into a black/purple screen mode (along the edges) with "no" apple logo. I tried the resetting method (top side button and home base button) and it did not reset. I tried resetting via itunes and I made sure that my Itunes was up to date but it still did not reset Ipad. I went on youtube and found out about a 'jailbreak' system known as 'redsn0w' and follow the instruction to break up whatever was causing my Ipad to become unresponsive. I believe this 'jailbreak' help to reboot the Ipad but I was not out of the woods just yet. For two weeks my Ipad was generating a "photo snap sound" when I tried rebooting the Ipad with the home base button. When connected to my macbook via iTunes it would also prompt or activate my iPhoto to load the photos from my Ipad. My Ipad 1 does not have a camera nor do I have an external (after market) one for that matter. The photo were the actual slide button to open the App's within the Ipad. I was baffled, confuse, and clueless. As I made several attempts to reset the Ipad It was still not displaying the apple logo and was not responding. I went back to 'redsn0w' to reboot and then reset it via Itunes to its original settings and later upload the latest firmware. While connected to my macbook, I was able to see all of my app's and began removing of them preferably Iphone app. I then decided hold off on the app's update and try to see if which of the App's was the culprit. It appears that the Ipad was confusing some or one of my "Iphone" app. I removed the iPhoto from the base of the Ipad and made it into a widgit with google earth. Then while viewing each of the app udate I saw that the "bump update" had something to do with photo. And it hit me, when I rebooted via Itune the first time the ipad rebooted but there was a brief moment where I tossed it on my back pack and it black out again. I then deleted this "Bump App" from the Ipad to prevent it from loading it lates update and I am happy to report the Ipad is now working properly. If you're not familiar with "Bump" this app is use with Iphone to exchage data/info from one iphone to another. I just now realize that you can also share photo wit "Bump" but not certain why this would cause this type of malfunction to my Ipad.
I don't know if this would help anyone out there but I would like to get the word out for anyone who may have this problem or situation. I welcome any other theory or better explanation because this is a conclusion that I came to.

My Ipad became unresponsive or it would not reboot after updating a few App's update. It would go into a black/purple screen mode (along the edges) with "no" apple logo. I tried the resetting method (top side button and home base button) and it did not reset. I tried resetting via itunes and I made sure that my Itunes was up to date but it still did not reset Ipad. I went on youtube and found out about a 'jailbreak' system known as 'redsn0w' and follow the instruction to break up whatever was causing my Ipad to become unresponsive. I believe this 'jailbreak' help to reboot the Ipad but I was not out of the woods just yet. For two weeks my Ipad was generating a "photo snap sound" when I tried rebooting the Ipad with the home base button. When connected to my macbook via iTunes it would also prompt or activate my iPhoto to load the photos from my Ipad. My Ipad 1 does not have a camera nor do I have an external (after market) one for that matter. The photo were the actual slide button to open the App's within the Ipad. I was baffled, confuse, and clueless. As I made several attempts to reset the Ipad It was still not displaying the apple logo and was not responding. I went back to 'redsn0w' to reboot and then reset it via Itunes to its original settings and later upload the latest firmware. While connected to my macbook, I was able to see all of my app's and began removing of them preferably Iphone app. I then decided hold off on the app's update and try to see if which of the App's was the culprit. It appears that the Ipad was confusing some or one of my "Iphone" app. I removed the iPhoto from the base of the Ipad and made it into a widgit with google earth. Then while viewing each of the app udate I saw that the "bump update" had something to do with photo. And it hit me, when I rebooted via Itune the first time the ipad rebooted but there was a brief moment where I tossed it on my back pack and it black out again. I then deleted this "Bump App" from the Ipad to prevent it from loading it lates update and I am happy to report the Ipad is now working properly. If you're not familiar with "Bump" this app is use with Iphone to exchage data/info from one iphone to another. I just now realize that you can also share photo wit "Bump" but not certain why this would cause this type of malfunction to my Ipad.
I don't know if this would help anyone out there but I would like to get the word out for anyone who may have this problem or situation. I welcome any other theory or better explanation because this is a conclusion that I came to.

E71 reboots after starting Maps 3.01

I updated today to Maps 3.01. (To be noted that Ovi Suite still considers there is a new version of Maps available and would download and install 3.01 again any times I click on update.) When starting Maps the load screen with progress bar appears, then I can see an "empty" map. No keys work. After a few seconds (around 10 or so) the phone restarts.
I deleted Cities folder and the file QF, rebooted, reinstalled etc. nothing helps.
Anyone has any idea how to get this app back?
Solved!
Go to Solution.

I have the exact same problem, also on E71. Have re-installed via official way (Maps Updater) and via downloaded .sis install file. All give the same result, a reboot after 10 seconds or so.
So Ovi Maps is useless to me now...
Message Edited by woutersmith on 03-Feb-2010 07:47 AM

10.5.2 Feature causes machine to shutdown upon reboot after upgrade.

After upgrading to 10.5.2, the machine reboots, then after
a lengthy spinny gear on the up swing, it promptly turns itself off. Boot up several
times, same result. Boot into single user mode, run fsck, after clearing
the boot disk, fsck gives me an error of some non existent drive. New in 10.5.2:
"the computer will now shut down if an automatic disk repair does not succeed during startup."
Turns out i had an old entry in the /etc/fstab file ... silly me.
Anyway just passin that one on for all other forgetful folks.
-miles

OK,
I at least got the repair to work and it said there were no problems. I remember when I was waiting for the reboot after the 10.5.2 install that the fans went all crazy in my iMac and then settled down. I remember an issue a while back where this happened and it was because of the SMU... or System Management Unit. In older Macs it is called the PMU (Power Management Unit) so do a search for that if SMU doesn't bring anything up.
Resetting this usually resolves power related issues.
http://docs.info.apple.com/article.html?artnum=301733
The above link describes how to do it on the iMac G5... you may need to do a search in Apple Support for your particular Mac. Be sure to use the search field on the left of the screen, not in the Apple.com navigation bar at the top right.
Did you also try resetting your PRAM? You do that by restarting (or starting) the Mac. Press and hold CommandOption+PR all at the same time. Keep them held down until the computer restarts again. I just did this (and still haven't reset my SMU) and the Mac has not shutdown on me yet.
If it does start to shutdown randomly again I will reset the SMU and let you know how it goes.
Good Luck!!
Jon

Q10 restarting/rebooting after minor bumps/shocks

Similar Messages

Maybe you are looking for