Q10 WIFI profile problems

Third time this week my BBQ10 has asked me to re enter my WIFI code for my home BT WIFI. Its loses the settings from my Saved WIFI profiles and I have to start again. Its getting a little tiring now. Not just restricted to work either, same happens with work settings at clients premises with their WIFI too. Any simple solutions please?

Hey Matt1
Friends remember to save the wireless networks in your blackberry Q10, as also that of your job, then this verifies that the options of wi-fi networks are stored so that when you connect you can just turn wi-fi option .
And automatically connects to the nearest network.
Regards.
Kudos ** Do not forget to give those people who help and advise you regarding your questions ** ** Can
Accept as Solution to Comments **
@gutijose14
BBM Channels PIN: C0007093A
Do not forget to give LIKE Those people who help you and advise you about your doubts. if the review has been SOLVED** # 4LL #ÉliteRoad Make a backup of your BlackBerry
BlackBerry Protect and BlackBerry Link constantly. #ichooseBlackBerry10 Gutijose14 Forums Veteran I

Similar Messages

WiFi Profile keeps getting disabled

I'm always having issues where the WiFi profile gets disabled.
My school has a number of access points all with the same connection info and so I should be able to connect onto all the different access points seemlessly, however, it seems to get disabled a lot especially when I'm in an area of poor reception, or when I'm moving from one access point to another. It is extremely frustrating because I have to keep manually clicking on the profile, and then re-enabling it. I already have "Allow inter access point handovers" enabled. I've tried with IP 6 on and off, doesn't make a difference. I had the same issue on my Playbook as well. There are a number of other people having problems as well as seen here on CrackBerry.http://forums.crackberry.com/blackberry-10-os-f269/saved-wifi-network-keeps-disabling-itself-774078/ As people have mentioned, this is likely due to the algorithm used by BlackBerry to prevent battery drain, but clearly it's causing the connection to stay dead. Especially for connections that have ever connected successfully, it would be good for the phone to keep trying every 5 or 10 minutes, or maybe try and figure out what cell-towers might be connected to the WiFi so if you are within a certain area, it will know to keep trying. For the mean time, there should definitely be an option in the menu to quickly and easily re-enable the wifi profile.(e.g. with the long press/right side menu, or maybe even have an option at the bottom of the profile list.)

Subject: Wi-fi Connection Drops and Disables wifi radio on TP-LINK 470N Router(Single Band - 2.4GHz)(Home Connection)
Hello,
I am Jay Panchal
Recently i owned BlackBerry z10 and Having Latest firmware upgrade version: 10.2.1.2102 Update.
I am Using Wi-fi Connection to connect internaet to my phone but since i h'd started using BlackBerry z10 it constantly drops connection with Home Router wifi furthermore it also disables wifi radio so other device connect ed to that router even make disconnected to router. Solution is to that problem is i have to restart my router every time.
I tried to change following changes to my router:
Mode: From 11bgn mixed to 11n only
Enabled SSID Broadcast
Wireless Security: From WAP-Personal to WAP2-Personal
Beacon Interval: From 100 to 50
RTS Thresold: From 2346 to 2304
I h'd made Address Reservation of my phone to router.
Note: My Router has Latest Firmware Version:3.16.6 Build 130529 Rel.47286n (H/W Version WR740 v4.0000)
I am using Sony Xperia Acros, HP ProBook 4440s, Sony Vaio Laptop Devices Parallely, Either of any h'd not problem with connection drop out until.
So, I request you to Help me out any from this situation.
Ant Modification/ Changes/ Suggestion are Welcomed.
My Router Setting:
Wireless Radio:   Enable
Name (SSID):   XXXXXXXXX
Channel:   Auto (Current channel 11)
Mode:   11n only
Channel Width:   20MHz
MAC Address:   XX-XX-XX-XX-XX-XX
WDS Status:   Disable
Beacon Interval : 50
RTS Threshold: 2304
Fragmentation Threshold: 2346 (Fixed)
DTIM Interval: 1
WMM Enabled
AP Isolation Disabled
WAN Connection Type: PPPoE (Connect Automatically)
Settings on phone:
Enable Connections
Hidden SSID off
Security Type WPA/WPA- Personal
VPN Profile <None Selected>
Band Type 2.4GHz
Auto Obtain IP - On
Using Auto-IP - Checked
IPv6 Disabled
Proxy Disabled
Inter-Access point Handover - On
Please help me to rid out this situation.
Thanking You.
Have a Nice Day
Regards - Jay Panchal

ISE wifi profile editable?

Hello,
We have implemented BYOD with certificates with ISE 1.1.2. After registering the device and installing the certificates for the devices, a network profile is applied that makes the susequent connections to the same ssid use EAP-TLS.
All works as intended, the single problem is that, in order to access the internet, the user should set his proxy manually.
Is there a way to edit the wifi profiles applied by adding a proxy setting?
Thanks in advance!

If your existing network topology requires you to use a proxy for Cisco ISE, to access external resources (like www.perfigo.com, the remote download site where you can find client provisioning and
posture-related resources), you can use the Cisco ISE user interface to specify proxy properties.
For more configurations, please check the below link:
http://www.cisco.com/en/US/docs/security/ise/1.1.1/user_guide/ise_admin.pdf

Wifi Proxy Problems

Hi,
Since I updated to BB OS 10.1, my phone has issues with my work wifi. I have had 10.1.0.1448 and am now on 10.1.0.1720, both have thee same issues. My work wifi has a http/https proxy. Previously my phone would only use the proxy for these protocols, while still allowing account syncing protocols to go direct. Since the new OS update, all protocols get pushed to the proxy if I add it in my phones settings. So I can either browse the web (with proxy settings enabled) or have my accounts sync (with my proxy settings disabled). Very annoying, can you please make the proxy settings more flexibile, allowing the protocols to be selected that must go via the proxy.

Hi,
Just a slight bit of behaviour that might help.
When I connect to the wifi, initially my accounts (gmail etc.) will sync for up to 2 hours. Then my account will show as not connected in the accounts section of the settings.
So I am thinking, maybe the Z10 does a address lookup on my 3g succesfullly, and only when it refreshes the lookup does it fail because of the proxy.
When I go into my account settings and select connect, it will give a 'server no response error'.
If I then go into my wifi profile, remove the proxy setting from the wifi profile, then the account will connect and retrieve my mail/contact/calender updates. But then my browsing is dead.
Hope this helps, because I dont know how to fix it.
The 10.0 OS worked perfectly, my colleagues android/apple phones have no problem, soo doubt it is the wifi.
Regards
Werner

I seem to have lost my wifi profile on my macbook air. How do I create another profile, or get the old one back?

seem to have lost my WiFi profile on my Macbook air. How do I create another profile, or get the old one back?

The profile will automatically be added back again when you connect to the network again. Here, I assume that you have a check mark in the box next to Remember networks this computer has joined.
If the box is checked and the network does not appear, then there may be an operating system problem with your Mac.
That would be beyond the scope of what we handle here with the AirPort Express, AirPort Extreme or Time Capsule, so you would want to post in the appropriate operating system community to follow up on that.
Mac OS & System Software

I need help with an email WiFi sending problem on my iPad 2

I’m having an email WiFi sending problem on my iPad 2     Model: MC774C/A; IOS VERSION: 6.1.3 (10B329).
While I use 4 email accounts on the iPad -- Hotmail, Gmail, iCloud and ns.sympatico.ca ( a division of BellAliant) – the sending difficulty only relates to the ns.sympatico.ca. The settings for this account are:         pop.bellaliant.net            and      smtp.bellaliant.net
I first noticed the problem about 3 weeks ago while travelling across the country (Canada). (I do recall about that time there was an update of my IOS and I also for my wife purchased from the Bell store an iPhone which shares my Apple account.) Prior to that everything worked well for a couple of years.
I noticed earlier this month that the iPad received mail fine but would not send at night using the motels’ WiFi. During the day, using my 3G account, all worked fine. I phoned Bell but was told that my experience was normal so I thought no more about it until I returned home and found the same problem at the house. I called Bell again and worked for 2 hours with 3 Bell technicians who succeeded in getting the iPad to neither send nor receive and gave up advising me to take the iPad into a Bell store to have it looked at. I did that and the young technician got the iPad sending and receiving by changing the        smtp.bellaliant.net      to         mail.1xbell.ca
However, when I returned home again, I realized that it was working on my 3G and still doesn’t send on my WiFi
I’m looking for any suggestions that might solve this annoying problem?

iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
Server does not allow relaying email error, fix
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
Why Does My iPad Say "Cannot Connect to Server"?
http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
http://support.apple.com/kb/ts2621
iPad Mail
http://www.apple.com/support/ipad/mail/
Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts   Tap on the Account, then on the red button that says Remove Account.
 Cheers, Tom

HT201304 Is it possible to restrict access to specific IOS apps based on the WIFI profile that a user has connected to?

Is it possible to restrict access to specific IOS apps based on the WIFI profile that a user has connected to?

you might be able to block it if the app uses Internet access
and depending on your wireless you might be able to block a specific user
accessing the backend host that the app uses
some firewalls offer application filtering but I'm not aware of any that work with ios apps

ITunes 11 wifi sync problem

Hi all,
I just update to iTunes 11, but since than I'm only able to sync my iPad and iPhone with a cable, the wifi sync option is not working. Both of my iDevices won't find my MacBook
Info:
iPad Wifi 3rd Gen
iPhone 5
MacBook Pro 15" (mid 2011)
Hope that anyone has a solution or Apple comes up with a solution

My itunes wasnt recognizing either my or my husbands phones via wifi either, I took the suggestion of others and reconnected to wifi, didnt work. What ended up working for me was going into network preferences on the mac, and than advanced and deleting my network from the list of preferred networks, turning on wifi on my mac, quitting itunes, turning wifi on my mac back on, reconnecting to my network and opening up itunes. Just synced a song to my iphone via wifi no problem. Odd workaround but hopefully that helps you. I am running osx 10.8.2 and my phones are on ios 6.0.1

WiFi (WLAN) problem - in the same room a iOS 5 device connects, iOS 6 not

Hi all,
I won't say that it's a proof for the iOS 6 WiFi/WLAN problem. BUT, it's evident that my iPhone 4 with iOS 5 sees all WLAN-networks and connects - my new iPad with iOS 6 doesn't! And I'm using the two devices in the same room. In addition my new iPad didn't have connection problems before updating to iOS 6.
Apple Software Engineers - please help and release the next update to fix it
Best regards
O.

iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting
http://www.apple.com/support/ipad/wifi/
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Has anyone had a problem with TapMedia File Manage on iPhone 5. I reported a WIFI functionality problem to the developer and asked for support. Instead they have been very unprofessional by name calling me instead of logically evaluate and troubleshoot th

Has anyone had a problem with TapMedia File Manage installed on iPhone 5? I reported a WIFI functionality problem to the developer and asked for support. Instead the company has been very unprofessional by name calling me instead of logically evaluate and troubleshoot the problem

Hi AKE1919,
Welcome to the Support Communities!
The following information should help you with this:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
http://support.apple.com/kb/HT1933?viewlocale=en_US
Cheers,
Judy

New retina MacBook Pro - WiFi connectivity problems

Dear all,
I've recently purchased the new Haswell 13" retina MBP, and I'm having exactly the same WiFi connectivity problems the 2013 Airs had. I have a solid connection for a short time, and at irregular intervals it just drops out. All of my other devices are still connected and have no problems. I've tried with two different routers/modems, but the problem persists.
Is this a known problem - with hopefully a software fix in the forseeable future, or do I need to return the MacBook?
Many thanks in advance for your help,
Nic

I haven't got a Retina, but I do have the same wifi problem. And if you've looked at these forums, you'll see it's been going on for years and no one seems to have a handle on what the issue is. All I can say is if I were in your place I'd take it back and exchange it. You have the chance now, so take it.

IPad WiFi Connection Problems - WiFi Symbol Appears With Full Bars but I Don't Get A Checkmark?

I was using the iPad one day and then all of a sudden it stopped connecting to the internet. The network at this hotel is very good and I've asked them about their router so it is not the router's problem.
I go to the Settings and tap on Wi-Fi then I tap on the hotel network. After a few seconds, it says the network name beside the Wi-Fi tab and it gives me the WiFi symbol showing 3 bars. But then I never get the checkmark or tick saying everything is connected. I try going online and it says the iPad is not connected to the internet. I've tried an iPhone and it connected and got a checkmark in a few seconds. I've talked to the front desk and he took out his phone and showed me that he could connect, he even opened a page without any problems at all.
I've been trying to find a solution for this for a long time. I've been searching Google over and over again. I turned Airplane Mode on for 1 minute, I've tried Resetting my Network settings, I've tried forgetting the network and reconnecting again, I've tried removing all restrictions from the iPad, I've rebooted the iPad A LOT, etc.
So this is my problem for people who don't want to read the whole message:
1. I can't connect to the internet with the iPad
2. It shows the WiFi symbol saying its connected but I never get the checkmark or tick.
3. It's not the router problem.
4. I've tried other networks and it doesn't work. It just keeps on showing that loading circle right beside the network name.
5. Do any of you know what this problem is? Or do you have a solution?
Thank you for reading this and have a great day

Since you are in a hotel, some of these are not applicable.
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Lumia 620 wifi connection problem

My Lumia 620 disconnect wifi few times a day, few hours everytime, whenever I go to the wifi settings, either there are just wifi(without mine) with no signal or nothing at all. Restarting phone and router won't work

Hi sengyau,
Thank you for posting and welcome to the Nokia Support Discussions!
Does the issue only happen with a particular Wi-Fi? Is the behavior same when connecting to other Wi-Fi networks? Try rebooting the phone. Don't forget to remove and replace the battery. If you have a phone cover, remove it for a while and connect the phone to the Wi-Fi to test it. Covers may block the Wi-Fi antena from receiving signals.
You may also delete the WiFi profile saved in the phone. Go to Settings, and then Wi-Fi. Tap and hold the Wi-Fi network that's having issues, and then delete. After that, reconnect the phone to the same Wi-Fi network.
It's also recommended to keep the phone software up-to-date. Check it by going to Settings, and then Phone update.
Failing still, try to restore the original settings of the phone. Go to Settings, and then About. Hit Reset device. However, this step will erase all data stored in the phone. Kindly create a backup under Settings, and then Backup. You may also transfer your media files to the PC via USB-MTP to avoid data loss. Consider resetting as your last resort.
Hope this information helps.

WRT110 WIFI password problem

Hi Everyone,
I've got a very strange problem. First, I indicated WPA under Wireless Security section and typed in my passphrase. However when connecting to my wireless network name my passphrase never worked. Second, I completely disabled security and tried to simply connect without any passphrase, but I was still being asked for a passphrase nonetheless. I checked and double-checked and saved settings making sure security was disabled, but I was still being asked for a passphrase when choosing my wireless network!
I could probably restore my WRT110 to factory settings, however I don't want to loose other configurations like certain open ports and IP addresses I opened up for firewall.
Is there a way for me to resolve my WiFI password problem without restoring to factory default? I just need to figure out how to make the WiFi passpharse work. Here's what I have there:
Security Mode: WPA Personal
Encryption: TKIP
Passphrase: 0sunspot0
Key Renewal: 3600 seconds
However, when I pick my wireless network and try to connect to it by typing in 0sunspot0, I get authentication failure!
Am I doing something wrong?
Thanks,
Victor.
Solved!
Go to Solution.

I have misplaced all relevant info. for my router. I am trying to connect to a mini ipad. What do I need?
Is the router up and running and you would only want to add a device wirelessly? If so, you may access the setup page as sabretooth has said. To check the wireless settings, you may check this link, http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=476326f36c294e579ba6691a8db5411e_3698.xml&pid=80&r...

Roaming profile problem?

I'm not sure it's a roaming profile problem or not, but I need help to fix it.
we use MetaFrame citrix to connect a remote computer running a medical program. Every computer has Citrix online plug-in.
If user uses computer user always use, everything will be fine.
It will be failed login Citrix if user need to login to anther computer to load the medical program. uninstall and re-install Citrix online plug-in will fix it. There's lots computers and users, I can't fix it by this way, need to find
out why.
Windows 2008 R2 + windows 7 pro & 8.1 pro.
Thanks for any suggestion,
ITdragon

seems no related to profile...
you can recreate a user account to test.
just a thoght...
create a script to uninstall this application. set it as logon script via gpo. when all uninstall, reinstall it...
Best,
Howtodo

Q10 WIFI profile problems

Similar Messages

Maybe you are looking for