Q10 won't automatically switch to mobile network when wifi becomes unavailable

Is there something in the settings I am missing to have continuous connectivity? It is quite frustrating to realize there is no mobile network connection being recognized when there is always one availabe. The cell must be powered off and on to re-establish mobile network connection. Please help

Hey Staats,
Welcome to the BlackBerry Support Community Forums.
Thanks for the question.
What version of BlackBerry 10 software are you currently running? Go to Settings>About to find this information.
Also has this issue happened ever since you had the BlackBerry Q10?
I look forward to your reply.
Cheers.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

Similar Messages

Automatically reconnect to Mobile Network when coming out of Low Power mode

My Pearl 8130 automatically disables the Mobile Network when it goes into Low Power mode. Unfortunately, it does not automatically re-enable the network when it comes out of Low Power mode. It also doesn't allow me to re-enable the network immediately after I've plugged it in, only after I've plugged it in and the battery has recharged for some period of time.
This means that I frequently absent-mindedly leave my phone disconnected from the network for hours at a time, even after the battery has recharged and the phone is capable of reconnecting. This is really inconvenient and, in my opinion, a huge design flaw.
Is there some way to configure my phone so that it will automatically re-enable the network as soon as (or soon after) battery power has reached the necessary level?

Actually, newer models do behave differently and have a different threshhold for cutting off the radio.
But remember this, the 8100 is getting to be an old device... and batteries have been upgraded since it was first released, as well as technology and specs on the newer devices.
The goal of the BlackBerry in cutting off the radio is to allow reamining use of your device, and to not allow the entire battery 100% to be sucked dry. Leaving the device signal and data running at less than 15% will very quickly deplete.
So, with that said, I would still recommend topping off the battery from time to time, in your case at night, or first thing in the morning.
And look at this application, ForceRadioOn
http://www.blackberrynews.com/2009/06/09/free-forceradioon-app-for-when-your-battery-gets-low/
But remember, using that app will drain your battery pretty quickly, but allow you to make that one last emergency call.
I guess you just can't have it both ways, long-life battery AND leaving the radio on below 15%
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

How to switch the mobile network in program?

Peace upon you ,
I searched in the forum but didn't get the answer.
Currently I have 2 mobile networks for my mobile say they are A and B.
Is there a way to automatically detect the mobile networks if there are A and B then choose A?
Or just simplely choose A no matter whether there is B availible?
I want to search for gsm networks operators available and select the preferred one
Thanks.

There are no BlackBerry APIs that would allow you to do this. I'm moving this to the general BlackBerry handheld forum for other possible configuration suggestions.
Mark Sohm
BlackBerry Development Advisor
Please refrain from posting new questions in solved threads.
Problem solved? Click the Accept As Solution button.
Found a bug? Report it using Issue Tracker

My Photosmart C410 won't automatically connect to the Network

My Photosmart C410 won't automatically connect to the Network, I have to put in my password for the router every time I turn on the printer from the printer keyboard. Is there anyway that the printer will automatically connect to my network?

Tell me about your network - router brand/model, encryption type (WEP, WPA, etc) and ISP type (DSL, Cable, etc).
When you turn off your printer, are you totally removing power from it (like shutting off a power strip)?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

IPhone 5s won't automatic connect to cellular network after the wifi connection lost.

My iPhone 5s won't automatic connect to cellular network after the wifi connection lost. I have try make a restore and open again my cellular data but the problem is still there, after I try to restart my iphone then can use my cellular data, but after few hour ago I still confront the same problem too.

I also tried a total reset. But it didn't work.

SharePoint Online switching to mobile view when attempting to add user permissions

Hello,
I am having a very weird problem that just started out of no where. It happens when I go to the Site Settings of my site collection and click on Site Permissions. When I click Grant Permissions to try to add users, the browser will immediately switch to
the mobile view.
I am able to switch back to the regular browser view, then when I click Grant Permissions, the box to select the user opens. I then choose the user and click Share. After clicking Share, the popup immediately goes to the mobile view. When I exit that the
users were never granted permissions.
This only happens so far when I am trying to add permissions. Is there something that I could have messed up?
What is happening and how can I fix this? I am out of ideas and unable to add permissions for users. I do not want to have to blow this site collection away.
Thanks.

Hi Andy,
According to your description, my understanding is that the page would switch to mobile view when attempting to add user permissions in SharePoint Online.
I recommend to verify the things below:
Clear the caches in browser to see if the issue still occurs.
Test the same scenario in another computer to see if the issue still occurs.
Append mobile=0 to the URLs in SharePoint Online.
In the meanwhile, you can post your question to the forum for SharePoint Online: http://social.technet.microsoft.com/Forums/msonline/en-US/home?forum=onlineservicessharepoint.
More experts will assist you, then you will get more information relation to SharePoint Online.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Firefox 3.5.1 on WinXP automatically switches to "Work Offline" when a connection to the internet drops. User must un-click "Work Offline" for it to work once a connection has been restored. Why?

Firefox 3.5.1 on WinXP automatically switches to "Work Offline" when a connection to the internet drops. This was not the case with earlier versions. Why is this necessary? Is there an option/preference setting to change this?

# Yes, if you go to accounts.firefox.org, sign out, you will now be signed out.
# Sign back in, and you will be asked to save the password you entered.
# This will save the password and autocomplete if you have this option turned on.
I am not exactly sure why the menu did not detect the password change or if it was stored incorrectly after you changed it? But after storing the correct password you can manage any duplicate passwords in the password manager.[[Password manager - Remember, delete and change saved passwords in Firefox]]

MacBook Pro won't automatically switch between internal speakers and display audio

I have a MacBook Pro that connects to a LED Cinema display. It used to automatically switch between internal speakers and display audio when plugged in to the display but won't anymore. I have to manually change it in System Preferences --> Sound. Does anyone know how to make it do that again?
thanks,
Ben

I just want to add, I have the same problem, and just want to help raise awareness of it.
1st, the problem only started recently (have been using the Thunderbolt display since it was released), I did not have this problem, and noticed it beginning only in the last month. (since January)
2nd, My particular setup, includes a hard drive attached to the firewire port on the back of the Thunderbolt Display (so, I am wondering if anyone else experienced this problem with a firewire drive being connected).
     My full setup:
          Macbook Air (2011)
         Thunderbolt display
          Western Digital drive (attached to firewire of display)
3rd, If I go into settings, what I will see is the "Display Audio" is selected (but no sound coming out),
If I then select "Internal Speakers," a buffered "history" of all the sounds I did not hear is then played (pretty funny actually) - for example, if I sent mail, adjusted the volume, and started playing a song.... it immediately plays all those sounds when selecting "Internal Speakers"
4th, If i then select "Display Audio" - it does nothing
5th, what I have to do, to resolve this is: eject all my hard drives, disconnect the thunderbolt cable, then reconnect the thunderbolt cable, and everything works as normal.

IPhone won't automatically join my home network

My original iPhone (not 3g) won't seem to automatically join my home network. I can only join if I go into network settings and tell it to. It does, however, join other trusted networks that it sees but for some reason, not at home. What's really weird is that my wife has the exact same phone and her's automatically joins without any problem. I've even compared the network settings for both phones and they are exactly the same. Any suggestions?
Thanks

As a first step, delete this wireless network from your iPhone.
Go to Settings > Wi-Fi.
Select to view your wireless network settings for this network and at the top, select Forget This Network.
Rejoin the network and test if this resolves the problem.

Mobile Network or WiFi for updates?

I've done my Q10 update(s) using the mobile network without any problems.
I saw somewhere that said updates should only be done using wifi.
Is this true? If so, why?
Thanks!
. . . . . Pete

i have done both, no difference but LTE was faster than my wifi at work.
Wifi at home is faster than my 4g connection as LTE is not so strong at home at times
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

Issue with mobile network vs wifi

Hi all, after using wifi the iPad cannot connect to 3g. It says that server is not responding or that it cannot activate mobile networks (while the signal strength is full). So I need to restart ipad and then it's ok. Thanks in advance

Same problem here...more specifically out of nowhere my ipad 3 seems to be unable to activate cellular network. But the "wheel of death" will spin and spin for many minutes prior to alerting me of the connection issue.
My ipad 1 was problem-free and the 3 just seems so much slower, especially when connected to 3g/4g.

No mobile network or wifi call!

Any one know if there is problems in the North wales area ? I cannot get network or wifi call.
If there is a problem with service, how long will it be down?
Thanks

Hi
Unfortunately there has been some issues with Wi-Fi Calling but there is not a nationwide signal issue.
The Wi-Fi calling issue is being investigated but is only affecting a small minority of customers.
Have you tried re-booting your device?
If you send me a private message with your postcode details. I can check to see if there are any issues in the area.
Thanks.

All websites automatically going to Mobile versions when using safari and firefox (likely started after mavericks update) Anyone have any idea how to fix this?

Not exactly all websites but many seem to be defaulting to their Mobile versions when using my Macbook Air... this is not dependent on browser type (Safare, chrome and firefox have been tried)... this is a new problem and may have started after the Mavericks update (although I am not 100% sure about the timing).
Has anyone had this problem? Any idea how to fix this?

Not exactly all websites but many seem to be defaulting to their Mobile versions when using my Macbook Air... this is not dependent on browser type (Safare, chrome and firefox have been tried)... this is a new problem and may have started after the Mavericks update (although I am not 100% sure about the timing).
Has anyone had this problem? Any idea how to fix this?

IOS devices won't automatically join Airport Express network

I'm at a friends place in New Zealand at the moment. I originally set up their network for them so know all about it. It's very simple. ISP router with wireless turned off. Ethernet cable into an Airport Extreme. That's it. The Airport Extreme is serving all the wireless traffic. They are a Mac only household.
I can get MacBooks to automatically connect when they come in and out of the house or turn wifi off and on but can not get this to work for iOS devices. If I go and manually join to the wireless network it happily joins without asking for a password but it will not auto join. When a device that was previously connected to the network comes back within range it refuses to automatically connect even if it's right next to the Airport. Even after I do join an iOS device to the network if the phone sleeps or autolocks it immediately loses connection again and won't auto join.
I've tried restarting everything including the iOS devices, Airport Extreme and ISP router. Everything is on the latest versions. iOS 8.0.2 for the iOS devices and the Airport Extreme is on 7.6.4. There's nothing else to restart. Any clues anyone?

Can Anyone help? Apple?

Won't automatically connect to Airport network after 10.4.8 update

After updating my Mac Mini CoreDuo from 10.4.7 to 10.4.8, it will no longer automatically connect to our Airport Express based Wi-Fi network. Even though the Network settings in System Preferences have not changed, and they do list it as the preferred network, it still will not automatically connect after log in.
Does anyone have this issue, and know of a solution?
(aside from the workaround of manually connecting after log in, and after waking the computer from sleep).
Background: My setup is to join preferred networks by default, the network name continues to be the one listed, the network still continues to show up in the Airport network list in the upper right corner of the screen. In essence, the Mac sees it is there but just won't connect to it. We have two other Macs in the household, both are PowerPC based, and both were updated to 10.4.8, and they have no issues. They continue to automatically connect to the Wi-Fi network we have. This seems to be with our Intel Mac only.
Mac Mini CoreDuo Mac OS X (10.4.7) Mac OS X 10.4.8

This all happens most likely due to a corrupted key chain (entry).
For instance, if you choose to keep your local Airport password stored in your personal key chain it needs to be accessible by the private Apple Airport Framework used by the network preferences. If this by any means, is not possible - the automatic login into you Airport WiFi network cannot take place.
All you have to do to get this fixed is:
1) Launch your Keychain Access Application located at: /Applications/Utilities
2) Open the Keychain First Aid (under the Main Menu: Keychain Access)
3) Set the Radio Button to Repair and enter your Keychain Password (most likely your personal password)
4) Start.....
Now after your personal keychain (name=username) is repaired it might be listed double in your Keychain List Window (it depends how you've setup the keychain). If so, NEVER DELETE ONE OF THIS ENTRIES because that's obviously a cosmetic bug in the Keychain Access Application but not harmful. Just look in your local Preferences Folder, locate the file "com.apple.keychainaccess.plist" and thrash it. Re-launch the Keychain Access Application and there is only one again.
Restart your Mac and........
After all I think anything should be back up to how it supposed to be. :-))

Q10 won't automatically switch to mobile network when wifi becomes unavailable

Similar Messages

Maybe you are looking for