Q10 wont turn on after reboot red light though still on!!! HELP

I just updated the software after a notification suggested so having my phone on charger and battery full and it started rebooting. this process took very long and at the end my phone is not turning back on and the red light flashes 7 times every 5 seconds. Can somebody help me?????? i am desperate!!!

Hi and Welcome to the Community!
Sounds like something may have gone terribly wrong during the update...hopefully you already have a good backup, because it's unlikely any of the "fixes" you can try will achieve that.
First, please try this sequence...note that, throughout the entire 4h15m process, your BB must remain directly connected to a known-good wall charger (not PC USB, not a cradle):
With the battery inside, connect your BB to the wall charger
Leave it alone for 2 hours, no matter what the LED or the display does
Remove the battery
Wait 15 minutes
Insert the battery
Wait another 2 hours, no matter what the LED or the display does
This has been known to "kick start" some BBs. If that fails, then increase the wait at step 4 to 2 hours also.
A further test is for the possibility that somehow your battery failed in all of this...to test that, this sequence is needed:
Obtain an known good and already fully charged additional battery...use it in your BB and see what happens
Obtain access to a known good and identical BB...use your battery in it and see what happens
The results of this will indicate if it's your BB or your battery that has the problem. Note carefully please that "new" and "know good" are not necessarily the same things. While rare, a "new" battery certainly could be defective. Rather, the simplest (and least costly, btw) method to conduct this test is to find someone with an identical BB who has no issues...trade batteries and see what happens.
Your last resort will be an OS reload via AutoLoader:
http://supportforums.blackberry.com/t5/BlackBerry-10-OS-Device-Software/Upgrading-OS10-devices-using...
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Similar Messages

  • My ipod shuffle 4gen wont turn on it shows red light then it goe

    my ipod shuffle 4gen wont turn on it shows red light for 5 sec then it goes when i try charging it . what can be done to solve the problem

    what do i do?

  • Torch 9800 wont turn on and the red light blinking..

    hi..im new at here..ive got problem with my bb torch 9800..last day after charging my phone..it cant turn on and the red light blinking..ive tried connect my phone to computer but it cant recognize my devise..ive tried many way to solve it like using BBSAK but it still cant connect to my devise..id tried using blackberry devise manager software but the problem still exist..really2 need ur help now..
    *ive update my phone OS to the latest one..didnt know if that is the problem..need ASAP..

    Hi and Welcome to the Community!
    I am very confused by your post. You say you can't connect your device...to your computer? If so, how did you manage to upgrade the BB OS? Given that, from what you've described, you can use BBSAK, that would require connecting to your computer, but then you say you can't. So I'm confused.
    Please try posting again, and be 100% clear about exactly what the symptom is that you wish to resolve, exactly all of the steps you have attempted (e.g., "like using BBSAK" isn't enough...what, exactly, did you do with BBASK?), and exactly the results of each step of what you have attempted.
    Thanks and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Q10 wont turn on after software update

    Q19 showed me that there is Sotware update, I did update i and when it was done an message appear to restart. But it won't restart... I have the bb pink led!! I tried to restart several time, removed battery... But get the same result .. The same pink square   Please advice.

    Ok, this is no big deal, the phone may have gotten disconnected from the update server, download blackberry desktop software and re install the update from your comptuer, try to aviod doing wireless updates, they screw up to much. let me know if this helps.
    1. If a post has helped you, show your appreciation by clicking Like at the bottom of the message box.
    2. If a post has solved your question, please click ''accept as solution'' to verify your question has been solved.

  • My iphone 6 wont turn on after i updated it and it doesn't work to restore it in itunes. what should i do?

    my iphone 6 wont turn on after i updated it and it doesn't work to restore it in itunes. what should i do?

    Hello ole-gunnar,
    Thanks for using Apple Support Communities.
    If your iPhone is unresponsive after updating your iOS version, then I'd like you to please follow the troubleshooting below.
    If you see a black screen
    You might need to charge your device before it can turn on. Plug in your device and let it charge for at least 10 minutes (20 minutes for iPad), then try turning it on. 
    You should see a battery icon while your device is charging. If you continue to see a black screen, reset your device. If your device doesn't respond when you press buttons
    Your device might not return to the Home screen when you press the Home button, wake from sleep when you press the Sleep/Wake button, slide to unlock or power off, or it might appear frozen. Try these steps:
    Restart your device.
    If it still doesn't respond, or if it doesn't turn back on, reset your device.
    If your device gets stuck during startup
    When starting up, you might see the Apple logo or a red or blue screen for a long time, or your device might restart again. Try these steps:
    Make sure that you have iTunes 12 or later on your computer.
    Put your device in recovery mode.
    When you get the option to restore or update, select Update. This will reinstall iOS without erasing your data.
    Get more help
    If you still need help after trying the steps above, contact Apple Support. 
    If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
    Cheers,
    Alex H.

  • My Iphone 5 charger got burned during charging and phone wont turn on after it

    Hi everyone. Last night My Iphone 5 charger got burned during charging and my iphone wont turn on after it...My Iphone was wery hot after it.  My  warranty expired on September and I can't go to Apple Store to resolve this problem. Pls advise... Thanks in advance.

    No. Sorry. But when such a large voltage mismatch occurs, it will destroy your entire IPhones internal charging and regulating system! Not just your battery. Every mobile "smart" device running at 5 volts internally has its own built in charging circuitry. The charging circuitry is inside your phone. It is NOT in your wall charger. Think of your wall charger simply as a "power source". The iPhone has the charging circuits built inside of it. The wall charger is just a "dumb" power source. The iPhone dictates how much power to draw and when to draw it, from the wall charger.
    Like you may have a 30 amp electric line. If you plug in a small light bulb it doesn't use the whole 30 amps right?
    So somehow one of your voltage adapters "failed" thereby burning out the phones entire circuitry. It is dead. Its not just an issue of the battery. Right?

  • My iphone 4 wont turn on after hours of charging, normally i would press the lock button and home button together but my lock button stopped working afue weeks ago. Help!

    My iphone 4 wont turn on after hours of charging, normally i would press the lock button and home button together but my lock button stopped working afue weeks ago. Help!

    Hello Kimbo1991,
    It sounds like your phone is not successfully booting even though you have reset the device. I would next recommend attempting a backup and restore to iTunes with this article:
    iOS: Back up and restore your iOS device with iCloud or iTunes
    http://support.apple.com/kb/ht1766
    If you are unable to restore with iTunes I would next put the device into recovery mode, and attempt the restore again:
    If you can't update or restore your iOS device
    http://support.apple.com/kb/ht1808
    Thank you for using Apple Support Communities.
    Regards,
    Sterling

  • My iPhone 5 wont turn on after i tried to update from 6.1.3 to 6.1.4.

    my iPhone 5 wont turn on after i tried to update from 6.1.3 to 6.1.4. My Phone refuses to turn on. i bought my iPhone from someone else and i don't know if the warranty is voided, how can i find out if is voided ?

    First try a Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least Ten seconds... (But can take Longer)... until the Apple logo appears. Release the Buttons
    If no joy... Try a Restore...
    1: Connect the device to Your computer and open iTunes.
    2: If the device appears in iTunes, select and click Restore on the Summary pane.
    Restoring  >  http://support.apple.com/kb/HT1414
    3: If the device doesn't appear in iTunes, try using the Steps in this article to force the device into Recovery Mode.
    Note on Recovery Mode.
    You may need to try this More than Once... Be sure to Follow ALL the Steps...
    Once you have Recovered your Device...
    Re-Sync your Content or Restore from the most Recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766

  • My iphone4 wont turn on after updating to ios5

    my iphone4 wont turn on after updating to ios5

    Hi
    Sounds like it's broken in a potentially major way after the drop. You really should take it to your nearest Apple Store/Apple Authorised Repair Centre a diagnosis and quote.
    Can't think of anything else any of us on this user-to-user forum can do for you?
    HTH?
    Tony

  • HT204204 my apple ipad wont turn on after i updating software

    sir,my apple ipad (16gb) wont turn on after i updating software correctly.so still this off position and cant any work.please help me

    You took a backup on your computer's iTunes prior to starting the backup, or you have a recent backup ? And you have all of the apps that you had on the iPad in the Apps part of your computer's iTunes library - none of your iTunes downloads are included in a backup (that contains apps settings and contents), the restore will look to pick them up from your iTunes library.
    To restore select the iPad on your computer's iTunes and either do File > Devices > Restore From Backup
    Or on its Summary tab in iTunes click the 'Restore Backup' button

  • Macbook wont turn on After software update

    PPlease help!
    my macbook air 11 wont turn on After software update. The screen completely black . Power button is not responding éven if it is fully charged.
    THank you
    NOra

    Have t you tried a SMC reset?
    http://support.apple.com/kb/HT3964
    It may be helpful if you indicated the EXACT MBA model you have and the OSX.
    Ciao.

  • MACBOOK PRO WONT TURN ON AFTER A REPLACE THE DISPLAY?

    MY MACBOOK PRO 13' WONT TURN ON AFTER I REPLACE THE DISPLAY ?

    Can you boot from your install disc?
    Apple Portables: Resetting the System Management Controller (SMC)
    MacBook Pro: Distorted video or no video issues
    (I dont have any appstores in my country)
    AASP's Outside of the USA
    User Groups

  • Ipad air wont turn on after update today?

    ipad wont turn on after update today. cannot do a hard reset either...
    tried holding the power and home at the same time, still won't turn on suggestions?

    How long did you hold the power and home buttons?  You need to do that for about 30 seconds, sometimes even more before the apple logo appears.

  • 4s wont turn on after OS update 8.1.3.

    4s wont turn on after OS 8.1.3 update. attempted restart several times with no success. fully charged battery & plugged I at time of update. iTunes doesn't recognize the device since it wont turn on so I cant even do a system restore. no problems previously.
    any suggestions? thanks in advance.

    The message is correct. Once you see the iTunes logo and the USB cord your iPhone must be restored. It has already lost all data stored on it. You can recover your data from a recent backup if you have one. You can recover all purchased music and apps without the backup. When I updated our 2 iPhones, I backed each of them up to iTunes before updating just in case. I recommend that you do this before you do any future updates.

  • HT4623 phone wont turn on after software update

    iphone wont turn on after software update

    Same issue so I connected to itunes. Itunes said phone is in recovery mode. I completed recovery process. Itunes then said phone could not be recovered and my screen is stuck on connect to itunes?!?!?!

Maybe you are looking for

  • JDBC to SOAP to trigger Web Service in PI XI

    Hello Experts, My scenario is: SystemA - > JDBC adapter - > PI - > SOAP Adapter - > SAP. Sender side (JDBC) works file, I can see the payload in the sender structure and the converted payload for the receiver side. I am testing the webservice using t

  • Creating a Fillable/Savable PDF

    Hey there, I have created a fillable form but I need to make the form savable by the users.  What do I need to do?  I am using Adobe Acrobat Pro version 9.4.6 on a Mac OS Lion 10.7.2 Thanks in advance and happy holidays!!

  • Items in toolbar disappear

    Lately I've noticed that when I open Safari Browser, items in my toolbar (back/forward, Home, Print, etc.) disappear. It happened few times. I had to reinstall them by using Customize Toolbar function. Any ideas what can be the cause?

  • How can I export the number of pixels of each layer into an excel file?

    I would like to export the number of pixels that each layer of an image contains into excel. How can I do this? Secondly, as I need to do this with several images, is there any way to name the layers so that all layers with let's say for example the

  • N97 - Settings 'Connectivity' do not respond

    Hello, I am having an issue with N97  'connectivity' settings. If I go to connectivity though settings and exit,Settings do not respond until I restart my phone.Does anyone know how can I get rid of this Problem? after i exit from settings, it still