Q5 screen cuts off at top and left side

I've had my Q5 for a week. Today I noticed the screen is cutting off on the top and the left side.
Does anyone have any idea how I can fix this?

Hi and Welcome to the Community!
Anytime random strange behavior or sluggishness shows up, the first thing to try is a proper reboot:
Pre-BB10 Devices ONLY. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes.
BB10 Devices. Hold the top button down until the counter reaches zero. Wait for the device to be fully shut down (e.g., nothing at all displayed on the screen, no LED lights, etc.). Hold the top button until the red LED is lit. Wait through the full boot-up process. If this fails, you can attempt the battery-pull method above, but it is normally NOT recommended unless nothing else works.
See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

Cut off the top and left sides of iFrame?

I have a page I'd like to place as an iFrame in another page.
Is it possible to move the framed page up and to the left so
that the
frame cuts off the top and left sides of the framed page?

Jim,
Thanks a TON! That worked well. It took me a bit longer to key it because the keyer didn't key out all of the color to black as well with the compound clip but I was able to make it happen. Video is up and I appreciate the help!

LG Flatron L245WP-BN monitor is cut off at top and has a black border at the bottom of the screen

LG Flatron L245WP-BN monitor is cut off at top and has a black border at the bottom of the screen. Connected to HP Pavillion laptop via an HDMI cable. Is there any way to align the monitor so the full screen is showing?
Please help!!
Thanks
This question was solved.
View Solution.

navers wrote:
Sorry! It is an HP Pavilion 15 Notebook PC. I can give you the product number if you want? Running on Windows 8.1 64-bit
Thank you for the additional information.
Yes, the product number would be helpful. Please don't provide the Serial #, however.
I believe your problem may be that the monitor is not compatible with Win 8.1. The only updates that are available are for Win XP and Vista. You can find this information in the link that I provided under the section titled "Software Update".
I suggest contacting LG Customer Service to see if they can help you.
Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Can I shrink the iTunes webpage on my PC monitor so it does not cut off the right and left margins?

Can I shrink the iTunes webpage on my PC monitor slightly so it does not cut off the right and left margins?

Can you? Are you capable of resizing the window?
Only you can answer that question.
If you want to know if it is possible, yes, it is possible.

Printing PDF's in Legal Size cuts off the top and bottom. How do I fix that

When I am saving a document to a PDF under the print section. I don't seem to be able to get it to print a lgal size document properly. It cuts off the top and the bottom. I also have this problem when I print a legal document as well. any suggestions?
Thanks

It also has to be rotated correctly.
Did either of these suggestions help?

When starting maximized, tabs are cut off on top and show properly only upon restore/maximize

When starting FF4 RC1 maximized, tabs ("tabs on top" mode) are cut off on top. To restore their normal display, you restore and maximize the window again.

After a bit of searching: solved by disabling TooManyTabs 1.3.2 extension.

Navigation tabs top and left side

Hi
I've never built a site with tabs both across the top as well as the left side.
across the top is supposed to be the categories and within each category, I want to have the related navigation down the left side.
is each of the tabs going to end up being a page? if so, how do you make the pages cascade behind each other like file folder tabs?
or are the tabs going to become links to the various pages?
how would you set that structure up? I'm looking at the example of the Sushi Bar website in GoLive CS2 but thats not really what I want
any direction would be great
thanks
best, M/

>or are the tabs going to become links to the various pages?
Yes, that's likely going to be the way to go if the tabs are the primary navigation. If they were the secondary navigation, might be worth looking into the Spry tabs, or a similar JavaScript option:
http://labs.adobe.com/technologies/spry/samples/tabbedpanels/tabbed_panel_unobtrusive.htm
http://labs.adobe.com/technologies/spry/home.html

Flash page: need to 'pin' top and left perhaps too...see

Dear Experts,
Thank for reading this.
http://maharishihoney.safire.com/
in the above page it is behaving just like wanted, EXCEPT want the top and left side (perhaps) to be 'pinned', meaning when resizing the browser window, the top does not disappear. I like that it resizes, and scales, yet, keeps the whole viewport filled. Don't like that it can disappear at the top if the browser window isnt just right.
What do you think?
Any ideas? Appreciate so much your thots.
Warmly with thanks,
Hope

Ok, thanks again for reading...
additional note: Am using cs3 and so far using as2
To achieve as seen in above link: in dreamweaver set the w and h to 100% , plus setting the margin to 0 for height, width, top, bottom, plus set ' scale' to 'noscale.
Then have also tried (not in link above) setting the publish settings to 100% for w and h, the flash does not disappear at the top, but then there is alot of white all the way around at top and bottom even with above mentioned DW settings.
when not setting publish settings to 100% then we get what you see above in the link: it scales very nicely with no white and fills the screen the whole time, BUT it does disappear at the top.
Thanks again for all your attention....
Warmly, Hope
p.s.
2 samples of resizing in flash:
http://www.fidmdigitalarts.com/#/home
http://www.isurfbecause.com

Dreamweaver page with flash - look at this - want top and left static

Dear Experts,
Thank for reading this.
http://maharishihoney.safire.com/
in the above page it is behaving just like wanted, EXCEPT want the top and left side to be 'pinned', meaning when resizing the browser window, the top does not disappear. I like that it resizes, and scales yet, keeps the whole viewport filled. Don't like that it can disappear at the top if the browser window isnt just right.
What do you think?
Any idea? Appreciate so much your thots.
Warmly with thanks,
Hope

have any other ideas how to accomplish above without flash?
Certainly - jQuery is a good alternative. To see an example, look here -
http://www.americanwatercolorsociety.org
ok, this is very good...
found this jquery plugin, for anyone reading this:
http://jquery.malsup.com/cycle/lite/
that does fade in and out something, even on click...
The rotation is jQuery.
But just because you use Flash for a cosmetic element (even an image rotation) doesn't mean that's the only thing that can be on the page, you know?
Yes, that is a good point..(-:
Thanks again for all your kind input.....
Warmly, Hope

In IMovie my project view is fine until it is finalized and then images are getting partially cut off on top(people's heads etc) Is there something I can do?

In IMovie my project view is fine until it is finalized and then images are getting partially cut off on top(people's heads etc) Is there something I can do?

My issue turned out possibly being a larger problem.
All of a sudden the server is in a bad, bad way. 30 minutes to get booted to the login screen. If I try to login I get beachballs for half a second at a time. I type login/password, the screen refreshes and I'm back to the login screen. I can't connect a keyboard/mouse directly to it, because it wants to do the keyboard recognition (I'm not using an Apple keyboard because they're all Bluetooth and I can't get in to do the Bluetooth sync). I can't do Disk Utility, because I can't connect a keyboard to do the key shortcut. I can't do Hardware Test, because I can't connect a keyboard to do the key shortcut. Can't reinstall Snow Leopard Server, because in their infinite wisdom Apple has removed the optical drive, and even if I had the optical, it wouldn't do any good because I can't connect a keyboard to do the key shortcut that would allow me to boot from the DVD.
I tried to do target disk override from Remote Desktop but it won't let me choose my other Mac's Remote Disc as a boot option. It also continues to show the Server as "Offline" even though power is on and it's on the network.
I would do my 2010 Air's USB drive - just to do a Disk Utility and see if it's a drive problem - but I can't tell the Server to boot from the USB stick.
Tried using my iMac as a monitor, that worked for a while, now it just flashes and then goes back to the iMac.
I'm thinking the logic board on this thing is about to die. Which is unfortunate, since my company opted out of AppleCare for this piece of equipment, and the 1 year expired last month. So...if the repair is going to end up being $800, they're going to have to pony up for a new server.

I'm using Big date theme but the numbers on the date is cut off on top. I'm on iphoto 11 and OS 10.8.2. anyone else having this issue??

I'm using Big date theme but the numbers on the date is cut off on top. I'm on iphoto 11 and OS 10.8.2. anyone else having this issue??

OK try the following: make a temporary, backup copy (if you don't already have a backup copy) of the library and try the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your
User/Home/Library/Caches/com.apple.iPhoto folder (Snow Leopard and Earlier).
or with Mt. Lion from the User/Library/Containers/com.apple.iPhoto/
Data/Library/Caches/com.apple.iPhoto folder
3 - launch iPhoto and try again.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences.
NOTE 2: In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.

Safari 8 Cuts off the top of every web page

Ok, so I'm looking for a solution or I want to know if other people are having the same problem so hopefully apple will fix it.
As my title says, Safari 8 in Mac OS X Yosemite is cutting off the top of every web page while in full screen. Not just a few, every single one, and it only does it in full screen. It only started after I updated to Mac OS X 10.10.1, it was fine with the original release of 10.10. Any takers?
Thanks,
Chris

From the Safari menu bar, select
Safari ▹ Preferences... ▹ Extensions
Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit.

Windows 8, Lightroom 5.6. When i enable filters to search. It cuts off the top 160 images. These images are NOT included in the search!!

In Windows 8, Lightroom 5.6. The search/filter function cuts off the top 160+ images. These are NOT included in the search.
Even when there are as little as 6 images it does not include the first 4 images.
I found this when I was searching a particular ISO. It did not show in the metadata search. I knew there were over 60 images at that ISO.
I tried a text search, it did not work either. The top 160+ images were left out.
Also it renumbered the images. My image number was #163 but Lightroom said it was #1.
In Windows 7 Enterprise, Lightroom 5.6 worked perfectly.

We'll need more detail to figure out what's going on. While we could play twenty questions, the most efficient way to troubleshoot this is to start out by posting a full-resolution screen shot of your LR window.

HP psc 950 all-in-one is printing half the page...cuts off the top portion of what I am printing.

HI! My HP psc 950 all-in-one is printing half the page....cuts off the top portion of what I am printing. Not sure what happened to the printer. Came home one day and the printing wasn't the same. Possibly the kids could have fiddled with it but no one is owning up to it. Any solution to get the printer printing normal again?
Thanks
-L

Hi there,
Could you provide the community with a little more information to help narrow troubleshooting? What operating system are you using?
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

How do you unfreeze a frozen top and left command in the printing position command?

The top and left option of the printing position command is frozen at 0. The error message states that a value between 0.000 and 0.000 is required. How do I change this? This happens will unedited and edited pictures. I have just installed a xerox printer perhaps there is a link between this problem and the printer.

I didn't even suggest that because I would have thought that would be the first thing anyone would have checked for! If you flip the on/off switch on the bottom of the mouse do you have a blinking green light? Whether you do or don't, if you are unsure of the batteries then replace them.

Q5 screen cuts off at top and left side

Similar Messages

Maybe you are looking for