QA07 - No batches have been found for processing

Hello,
I know this topic was discussed many times, but I still don't find solution for my problem.
I'm getting error "No batches have been found for processing" via QA07.
I want to move stock from unrestricted to Q-stock after SLED is expired.
These are my settings:
MM Data:
Batch master:
1.Can you please help me to find the problem?
2. Do I need to setup a job for QA07 or SAP will move automatically?
Thanks!

Hello,
Did you check this thread Deadline Monitoring ?
I believe it will help you, there are many information.
Also, from this thread: Recurring Inspection 09
"The following conditions are required to have the inspection lot created automatically when the transaction QA07 is executed.
1) Inspection type '09' should be activated.
2) Inspection plan with usage '9' should be created.
3) Total shelf life(TSL) field and inspection interval field should be maintained.
When the batch is received initially then SLED and Next inspection date(NID) are updated automatically (SLED = Manufacturing date + TSL) and (NID = Manufacturing date + Inspec. Interval). Now one catch here is that SLED always have an edge on Inspection date so Inspection date should always be kept few days lesser then TSL, otherwise as the SLED is reached first stock will be moved to block status without considering settings shown in below screen shot. Can also give the number of days prior to inspection date when the inspection lot be printed by specifying days in initial run in days."
Kind regards,
Natália

Similar Messages

RW-20019 No install actions have been found

Hi,
I am trying to install 12.1.1 on my RHEL 32 bit server.
It is not accepting the hostname.
How can I configure this properly?
Please check the below error while running rapidwiz.
"RW-20019 No install actions have been found for this machine. Continue on other
Uninstalled machines in your configuration, or fix the configuration file to correctly call out this machine"
Thanks,
Kavitha

Hi,
It is not accepting the hostname.
How can I configure this properly?What do you mean by not accepting?
What does "hostname" return?
Do you have proper entry in the hosts file?
Please check the below error while running rapidwiz.
"RW-20019 No install actions have been found for this machine. Continue on other
Uninstalled machines in your configuration, or fix the configuration file to correctly call out this machine"At what stage/step you get this error?
Thanks,
Hussein

RW-20019: No install action have been found

i m using windows server 2008 enterprise(64bit) at both end, i successfully installed DB in 1st node i.e. DB Server, also copy the conf_SID.txt file to 2nd node i.e. Application server, i browse the config file that i hav copied from DB Node but it gives this error "RW-20019 No install actions have been found for this machine. Continue on other
Uninstalled machines in your configuration, or fix the configuration file to correctly call out this machine"
also host files on both Node configured correctly and both machines are connected to same domain, can ping each other with complete hostname and IP address
Note: both machines are on Virtual Environment.
thanks

818389 wrote:
i m using windows server 2008 enterprise(64bit) at both end, i successfully installed DB in 1st node i.e. DB Server, also copy the conf_SID.txt file to 2nd node i.e. Application server, i browse the config file that i hav copied from DB Node but it gives this error "RW-20019 No install actions have been found for this machine. Continue on other
Uninstalled machines in your configuration, or fix the configuration file to correctly call out this machine"
also host files on both Node configured correctly and both machines are connected to same domain, can ping each other with complete hostname and IP address
Note: both machines are on Virtual Environment.You cannot install EBS R12 in Windows 64-bit directly and you will need to install it on 32-bit then migrate to 64-bit.
Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Microsoft Windows Server (32-bit) [ID 761567.1]
Migrating Oracle E-Business Suite R12 to Microsoft Windows Server 2008 R2 [ID 1188535.1]
Thanks,
Hussein

FAGLGVTR= No accounts to be processed have been found

HI Expert,
I have two company code A & B, B copy form A.
When I run FAGLGVTR (balance carryforward) at company code B for 2012. I get the message "No accounts to be processed have been found". But company code A work the tcode is fine.
How can I debug this ?
Ps.The post period is open from 2011/12 to 2012/01.

hi
firstly, you need to check whether you have copied all accounts from source company code. (fs00)
then you probably need to check the balance of previous year, if you just copy the company code, no balance is copied in fact.
(FAGLB03 - Display Balances (New) )
best regards, Lawrence

HT204053 I have just installed IOS7, having reset the security questions I have been asked for a Rescue Email address. I have entered my primary address, this is not valid. I have added another of my hotmail addresses and the process will not continue. I

I have just installed IoS7 on my I Phone. Having reset the security questions I have been ask for a Rescue Email address. My primary address is not acceptable, I have tried other addresses put but the process will not forward. I cannot go back, my phone now will not function. The Rescue Email address keeps appearing. Help please.

Did you check the email account for a verification email from Apple? You may need to respond by clicking the Verify Now link before the new rescue address will be accepted.

I am loading Magic Jack. The error message I get is "Session cookies have been disabled for your web browser. Please enable session cookies so you can register your device." I have followed you process several times. This advice doesn't work. Pls help

Session cookies have been disabled for your web browser.
Please enable session cookies so you can register your device.
The URL is not specified.

Session cookies have been disabled for your web browser.
Please enable session cookies so you can register your device.
The URL is not specified.

A duplicate attribute key has been found when processing

Hi
When I process one of my dimensions it fails and I get the following error:
Errors in the OLAP storage engine: A duplicate attribute key has been found when processing: Table: 'Customers', Column: 'DisplayName', Value: 'Stephen Grant'. The attribute is 'Display Name'.
I don't know if this is significant, but the attribute to which it is making reference was added through BIDS 2008 (the cube was originally created with BIDS 2005).
There are no duplicates of 'Stephen Grant' in the DisplayName column. Not that it should matter if there were as this attribute has a cardinality of Many, with an rigid attribute relationship directly to the dimension's key attribute. The Key column for the Display Name attribute simply refers back to the same (DisplayName) column in the table.
If I delete this record, or even just update the DisplayName field from 'Stephen Grant' to something else, the dimension processes just fine. I can't work out what it is about this record that is stopping the dimension from being able to process.
Can anyone help me figure out what's going on?
Julia.
P.S. I am using SSAS 2008 on Windows Server 2008

Hello there,
Does anybody has the complete resolution for duplicate entries data. I am showing the data below .
RegionName
BranchName
LoanOfficerFullName
PRIME - TEAM NORTHEASTERN
CALIFORNIA
ALONA HAYES
PRIME - TEAM WESTERN
RENO-DAMONTE RANCH
VINCENT LOTITO
PRIME - TEAM WARTON
NEWARK (Chicago)
CHRISTOPHER CLIFTON
PRIME - TEAM WARTON
GRAND HAVEN (West Michigan)
SEAN FOLEY
PRIME - TEAM SALMANS
LAWTON (Amarillo)
THOMAS STEARNS
PRIME - TEAM BARTON
CALIFORNIA
ALONA HAYES
PRIME - TEAM ROBINSON
LAS VEGAS
ANGELA DEATON
PRIME - TEAM ROBINSON
LAS VEGAS
HERMAN VANDER VELDT
PRIME - TEAM ROBINSON
LAS VEGAS
DAWN ROBINSON
PRIME - TEAM ROBINSON
LAS VEGAS
MICHAEL BIRK
Here i have the Hierachies in order LoanOfficerFullName-->BranchName-->RegionName. Loan Officer is the lowest level. I had created another column and make that unique entries so that I could make the unique column as the Key and the hierachies i have linked with the key column value. The issue
is that i am getting the expected result in OLAP from data side. But the data is not getting aggregated like Team Barton is coming twice though for the Dimension I make IsAggregatable property to True. If anybody can help me I will aprecciate. If any other clarification need I can provide.

Error when build cube - A duplicate attribute key has been found when processing...

Hi all,
I got an error “Errors in the OLAP storage engine: A duplicate attribute key has been found when processing: Table…” when built new cube. It looks strange in my case. I created a small example to re-produce this error as below:
I create a data source table as below
AgencyName(varchar(50))-----MediaSpend(float)
OE------------------------------------100
Œ-------------------------------------200
Then I create a cube base on this data source with a dimension AgencyName and 1 Measure MediaSpend.
The error happened again. This look link a special case when ‘OE’ and ‘Œ’ existed in a dimension.
Do you have any ideas on this?
Thanks,

Hi khoana,
Here is a similar thread about this topic for your reference, please see:
A duplicate attribute key has been found when processing:
http://social.technet.microsoft.com/Forums/en-US/sqlanalysisservices/thread/7c72639b-a050-4243-9f1d-4da906e981d5/
Regards,
Elvis Long
TechNet Community Support

"No sensor values have been generated for this instance." BPELConsole msg.

I've reworked the GoogleFlowWithSensors demo to use BAM sensors as a prelude to incorporating BAM into a a real BPEL process we have that's much more complicated. I've moved the schema in the GoogleFlowWithSensors.wsdl file to an imported XSD file as directed in literature. I created in BAM Architect a DataObject called ProcessExecutionTimestamp with 5 columns instanceId, receiveInput_TS, invokePartnerLink_TS, receivePartnerLink_TS, and callbackClient_TS. I was able to successfully tie the BAM sensors to this dataobject.
Everytime I test the BPEL process in BPELConsole, I get the results back but I get nothing but a "No sensor values have been generated for this instance." message in the BPELConsole "sensors" pane. I have found nothing in any BAM or BPEL log that indicates what could be going on.
Thanks in advance.
Message was edited by:
user565339

Hi,
BPEL Console does not show data published on BAM Sensors, to see on BPEL console you have use database sensor type.
Bpel log (default.log) shows any errors encountered on sending data to BAM.
Thanks

I am trying to download itunes to my computer, when i hit the download button it goes directly to the screen that says now you have itunes......NOTHING HAS BEEN DOWNLOADED, i have been trying for two days to download and it is not working please help!

I am trying to download itunes to my computer, when i hithe download button all it does is go to the "now that you have downloaded itunes" screen.....NOTHING HAS BEEN DOWNLOADED!!!!!!!!!......i have been trying for 2 days to do this, please help.....Thanks

i have the same problem, i have a windows 7 and the little screen comes up saying statues: processing additional packages help us

I am trying to download an epub book from the library, which I have been doing for almost a year. Now I am being asked for my adobe id, which I enter and I get an error message stating Adobe Activation Request Error:2004.. What's this ?

I am trying to download an epub book from the library, which I have been doing for almost a year. Now I am being asked for my adobe id, which I enter and I get an error message stating Adobe Activation Request Error:2004.. What's this ?

I downloaded Blue Fire Reader and it requested an adobe id. I clicked on the link that was in the error message stated http//adeactivateadobe.com. Found out that if the date and time on my Ipad is wrong that it won't let me download a book. I was off 5 hours. I reset my clock settings and adobe id let me download a book from the library. I am back to using Overdrive and adobe again on my ipad.
Thank you.

Problem with LSMW - RFBIBL00 "FI_INVOICES: No terminations have been found"

Hi experts,
Hope you can help me.
I'm trying to load open invoices into SAP from a legacy system using LSMW. I defined all the structures and finished all the step but didn't load any data. I looked at the converted data and everything looks Ok.
This is the log:
FB018                    File P2P_GRANITE_VENDORS_FI_INVOICES.lsmw.conv is being checked
FB012                    Session 1 : Special character for 'empty field' is /
FB019                    Session 1 session name FI_INVOICES : No terminations have been found
Following further information about the LSMW:
Object: 0100
Method: 0000
Program: RFBIBL00
Program Type: D
Source structures (linked by CNT field)
INV_HEAD:
Company Code (BUKRS), Fiscal Year (GJAHR), Document Type (BLART), Posting Date (BUDAT), Document Date (BLDAT), Document Header Text (BKTXT), Reference Document Number (XBLNR), Currency Key (WAERS), Count (CNT)
INV_ITEM
Posting Key for the Next Line Item (NEWBS), Account or Matchcode for the Next Line Item (NEWKO), Amount in document currency (WRBTR) , Baseline Date (ZFBDT), Cash Discount Days 1 (ZBD1T), Item Text (SGTXT), Count (CNT)
Document Type ZC or KR
Posting Key 31 and 40
Thanks in advance,
Mairo.

It looks everything fine for me.. what is ther exact error message are you getting..
However also go through my book on LSMW, it may help you.
http://www.4shared.com/document/wkl5vHpv/LSMW_SATISH.html
Satish

Whenever I try to open iPhoto, a message comes up saying that 148 photos have been found in the iPhoto Library that have not been imported. It asks me if I want to import them and I say NO but then it places them in a recovered photo folder. I keep deleti

Whenever I try to open iPhoto, a message comes up saying that 148 photos have been found in the iPhoto Library that have not been imported. It asks me if I want to import them and I say NO but then it places them in a recovered photo folder. I keep deleting the empty recovered photo files but it just keeps asking me every time I go to open iPhoto! I'd love to just get rid of the "found" photos (I can't open them anyway!)
How do I get rid of them so that I can just open iPhoto straight up without this?
Linda

Open your iPhoto Library package with the Finder.
Click to view full size
look for a folder titled Import or Importing and move it to the Desktop. Launch iPhoto to see if the message goes away. If there is no message check the contents of the Import folder to see if you want to keep any of those image files (usually they have not been imported into iPhoto). If you want to keep them then drag the folder into the open iPhoto window to import.
OT

I have been paying for two edge agreements for the past 3-4 months AND i have not gotten a reimbursment for anything...

10/11/2013
Debit Card Transaction
VERIZON WRLS 08253-01 800-9220204 CA 10/09
$92.30
On October 11th I started an EDGE agreement for the NOTE 3. I make a $92.30 payment over the phone (which is listed above). The lady said it would arrive two days after the phone comes out. It didn't show up two days after it came out and my little Droid X went dead on me. I called customer service and asked if the phone has been shipped yet. They said it has not. I asked if I could pick it up in the store instead. They said yes. They said they would cancel the shipment so I can pick it up in the store. I end up going to the store at Torrance Crossroads and I was just about to get the phone. Then sales rep was trying to force me into buying the case and charger package that was a deal with the phone for $100.I said no and he got hurt and quiet over it. 5 minutes later he comes up to me saying the edge agreement is not cancelled and they can not give me the phone. I asked if there is anything he can do or call customer service and verify because customer service told me it could be done. He said no and walked away.
I call customer service and they say that they stopped the order and told me to go back to the store and try again. I did not wanna see the sales rep at Torrance Crossroads so I go to another Verizon store on hawthorne blvd in Torrance. I try the same process and the same thing happens. I tell them to call customer service and verify what is going on. I wait for 2 hours while they talk to customer service and the financial department. They tell me they will start another edge agreement on my girlfriends line and give me the note 3 so I can use it on my line. They said they waved the fee through some promotion since I went through a lot of trouble getting the phone and I should be getting a check in the mail for the $92.30 I paid on 10/11/13.
Ever since then I have been paying for two edge agreements at $29.16 a piece. I have also been paying an extra $8 for insurance on a note 3 that I do not have. I have not gotten reimbursed the $92.30 I paid on 10/11/13. I have been calling customer service since December and have not gotten any where. Today was the last straw when the guy put me on hold and I ended up getting transferred to the sales department... What should I do? Is there anyone that can actually help my situation out. I already suspended my line and will do so for the next 5 months until this is fixed.

@Dakotaep
I am so sorry to hear of your experience with purchasing your new Samsung Galaxy Note 3! This definitely should have been resolved in your first call to us. I would be glad to review your account and ensure the Edge Agreement is corrected. Please accept my "Follow" request and send me a direct message so I can further assist. Thanks!
AnthonyTa_VZW
Follow us on Twitter VZWSupport on Twitter.

"No configured AirPort base stations have been found." I can see the content of the TimeCapsule's drive in finder and Time Machine but it no longer is making backups. Ideas?

Bought new TimeCapsule March 2013. Worked fine. Now get "No configured AirPort base stations have been found." I can see the content of the TimeCapsule's drive in finder and Time Machine but it no longer is making backups. Ideas?

Make sure that you have AirPort Utility 6.3.1 installed on your Mac.
AirPort Utility 6.3.1 for Mac - Support - Apple
Then, power off the entire network...all devices...in any order that you want
Wait a minute, then start the modem first and let it run a full minute
Start the next device connected to the modem, which may be your Time Capsule and let it run a minute
Keep starting devices one at a time the same way until the entire network is back up
See if AirPort Utility can "see" the Time Capsule now.
If yes, try another backup. If you encounter an error message, post back with the exact message.

QA07 - No batches have been found for processing

Similar Messages

Maybe you are looking for