QA11 - Quantity Posting

HI All,
Iam posting some quantity through the QA11 BDC by considering the Materials having the quality stock(having the inspection lot origin = 09 only). But for some materials the qauality inspection stock is maintined in both the 08 and 09 types. In that case my bdc is failing with an error message "The Sum of the Quantities that still must be posted is    100".
Could u suggest me how to post the quantity through the QA11 successfully(with 09 only). Is there any BAPI or alternative to post it ?
Thank you.
Regards,
Padmasri.
Edited by: Padmasri on Jul 30, 2009 2:36 PM

Check BAPI_INSPLOT_SETUSAGEDECISION
Kanagaraja L

Similar Messages

  • Quantity Posting Required (SPRQ),

    Dear Friends,
    For an Inspection Lot, System status is
    UD   Usage decision has bee
    LTIN Long-term inspection
    PASG Plan/specification ***
    CCTD Insp. characteristics
    CALC Sample calculated
    RREC Results confirmed
    STIC Short-term insp. compl
    SPRQ Quantity posting required
    SPCO Stock posting complete
    STUP Statistics updated
    In inspection Lot tab, inspection Lot qty is 4000,
    but total quantity posted is 0 and To be posted is also 0.
    And in Stock overview, no quantity is there in Quality Inspection stock type
    Please tell me how to post full quantity.
    Thanks and Regards
    Prashant Atri

    Prashant,
    For the status you provided on the lot, it appears to me that the lot is completed.
    According to your posting you have zero stock in QI.  According to the statuses you provided in your first post, the stock posting is completed, (SPCO), and the UD is made (UD).
    What makes you think you still need to post against this inspection lot?  You don't say that you are missing material in unrestrtcited stock. 
    The inspection lot quantity should not change.  It always remains the same, i.e. whatever the initial lot qty was +- any lot qty. corrections. I'm wondering if you are confusing this and thinking that needs to be posted?
    The only thing odd about your lot is the "amount posted" being zero.   Typically it should equal  some value between zero and the lot qty size. What does the sample size value equal on the stock posting screen shown just under the inspection lot quantity? Are they equal?  If so, is there any chance one of your characteristics is set up as a destructive test?  In that case, the system could think the entire lot was destroyed in testing.  Hence zero stock to post, posting complete and no stock in unrestricted.
    If you have the stock in unrestricted, then I come back to the question of why do you think you need to post against this inspection lot?
    FF

  • BAPI_INSPLOT_SETUSAGEDECISION Error during quantity posting for inspection

    Dear SAP Guru,
    I used a BAPI call : BAPI_INSPLOT_SETUSAGEDECISION in my program to perform UD and post Q-stock to Unrestricted stock. The BAPI executed successfully for my developer user account but not for end user account login.
    The BAPI returns an error as below:
    Error captured in system: EQV                  054Error during quantity posting for inspection lot 340005776022, manual proc. Required
    Guess some authorization object for the BAPI_INSPLOT_SETUSAGEDECISION call is missing.
    Have tried SE97 for possible Authorization Check for Start of a Transaction but not able to solve the problem.
    Can anyone help? Really appreciate that.
    Thanks and Regards.

    Hi ,
    Run the transction SU53 after the error with user login id , to see authorization .
    Amol

  • Additional field for quantity posted

    Dear Friends,
    While doing UD there are some fields for the quantity posting such as to unrestricted,to scrap,to block etc.but there is no field for to rework or rejection.As practically there may be a situation that the material which is non confirming in quality may me rework & clear it ok.
    now please tell how can i add that field for rework in that area.
    Please reply.
    Regards,
    Chandra.

    Dear Chandra
    My suggestion will be use Block for Rework purpose. Please add this in your Blue Print process.
    Please find the rework process for your reference
    Rework & rejection
    1. Reject the material in QA32 to block stock
    2. Reverse faulty material using Tcode MB1A u2013 262 movement type against the production order
    3. if you need to scrap highly faulty materials   use Tcode MB1A u2013 551 movement type against a cost centre
    4. Create a rework order using Tcode Co01 order type (PP03)
    5. Enter the Parent production order number in the goods receipt tab in Co01. (inbound delivery)
    6. Issue goods against the rework order using MIGO
    7. confirm the rework order through co11n
    8. Move the material back from block to quality using Tcode MB1B u2013 349 movement type (activate 08 inspection)
    9. Inspection lot created
    10. do the posting accordingly
    Regards
    gajesh

  • T code QA11, quantity can not be posted to blocked stock

    For Inspection lot with system status is   INSP RREC SPRQ, when user tries to perform QA 11 to post stock to blocked stock the system does not allow as "to blocked stock field" is greyed out and also can not chnage the storage location on that screen.
    I have checked the material already exists in the WH/storage location also inspection charachterstics are corrct not sure what else to check.please advise.

    Does not seem like authorisation restriction since user is able to process other QA11 for the same plant/WH and storage location. Does not seem like customisation either since all " Quantity to be posted "options and storage location are greyed out under inspection lot stock Tab
    After Accept atleast system should allow posting to "unrestricted stock " but thats not available either.
    For the same material/plant/WH, I am able to sucessfully post stock when system status is -REL  CALC SPRQ but in this case the status is -INSP RREC SPRQ, what does this signify.Please help

  • QA11-Quantity pending to be posted from quality status to unrestricted use

    Hi Experts!!
    In usage decision process we can select the "code valuation" as Approved to transfer automatically the total quantity from status quality to unrestricted use. But in our system, a small quantity of the total quantity does not is being transferred. eg: We have the inspection lot with 76 pc... we should select the code valuation "Approved" and save. After this, 74 pc are transferred from quality status to unrestricted use. However, 2 pc are kept in quality status.
    Could you help me with this issue?
    Thanks in advancer for your attention,
    Valdevair

    dear Valdevair
    Got the solution for the same. I think you have activated in selected set for the codes "Consider Long-Term Characteristics for Stock Proposal". This is why the stock is remaining in quality
    QS51 > selected set > code group > codes >  long term inspection >  maintain do not consider
    This will solve the issue
    Please let me know your feedback
    Regards
    gajesh

  • ML81N Negative Quantity Posting for Credit or Difference Adjustments.

    ECC 5.0 - DIMP
    This is a VERY, VERY common situation at nearly all companies where a credit or small difference may occur between the invoice amount and the SES.  Reversing / canceling and reentering documents, along with all of the additional accounting documents created is not an appropriate option.
    =========================
    I have a situation with Service Entry Sheets where a vendor delivers services for a PO line item.  There can be MANY service entries, and MANY invoices for a single PO Line item.
    Invoices are posted against the open GR SES amount on the PO Line Item and not specifically to the service entry sheet.  As a result there may be more than one invoice tied to a single service entry sheet.  The reversal option would requie
    When credits come in, or when vendor discounts are taken the SES amount does not match but there is a need to ensure that the SES amount matches the vendor credit amount (whether credit memo or discounts taken). 
    NUMEROUS SAP OSS Notes say that Negative Service Entry Sheet Amounts are possible, and in the first step I even get an SE042 warning message about the negative quantity.  However, when I press ENTER to go past the warning I then get messgae SE396 as a hard error and the dialog box for the error has JUST an exit button causing the entire transaction to exit the process.
    Has anyone ever worked successfully with negative service entry sheet quantities?
    If so, what were your lessons learned?
    Here are some of the notes I have reviewed, and the ability to do the negative SES quantity goes back to 4.6:
    365648
    375799
    411262
    455707
    1068156
    1166693

    Hi Bill,
    If you try to save an SES with ONLY a negative quantity you will receive               
    the following error Value of specs. less than zero (function cannot be                 
    performed) Message no. SE396.
    You can enter negative VALUES based on the               
    following rules:                                                                               
    The service specifications contain lines with negative values.                         
    Service lines with negative values are only allowed if the following                   
    conditions are fulfilled:                                                                               
    The total value of the specifications is positive.                                     
    The total value of each account assignment is positive.                                                                               
    Please see other notes attached.                                                       
    354903 Postings: Invoices for services                                                 
    499575    FAQ: Invoice verification/goods receipt in service                           
    1174830 FAQ: Invoice cancellation for services       
    Regards,
    Edit

  • QA11 for posting date

    Hi all ,
    System allowing to post document having "Posting Date" greater than "System Date" in QA11.
    Any BADI is avialable to restrict the same.
    Please help

    As I know there is no customer exit or BADI to control the posting date field(RQEVA-BUDAT) at UD transaction.
    Using a field exit is only way for your requirement.
    But SAP does not support the field exit functionality anymore through CMOD from version 4.6C.
    Therefore you have to use report RSMODPRF or develop a function like as 'FIELD_EXIT_***'.
    Regards
    Luke

  • Rework order Operation Confirmation and quantity posting to main order oper

    Hi Friends,
    I have confirmed first operation of production order by CO11N. While confirming the operation, i entered 5 qty. as Rework Quantity. Due to trigger point function, Rework order gtets generated. After completion of Rework , i confirmed rework Order. Now i want to add this Rework Quantity in the second operation of main order . So i can be able to make confirmation of whole quantity of second operation. How to do this?
    Normally system takes the first operation yield quantity as next operation quantity for confirmation.
    Waiting for Reply!
    Thanks!

    Dear,
    If a separate rework order is created using the trigger point, the system assumes that both the rework and all subsequent operations are processed via this rework order. As if first operation confirmed as 10  5 as rework quantity.
    It means that you can second operation you can confirm as 5 only. So you need to add all operation in reference operation set so confirm all operation quantity here and remaining quantity in main order. So your confirmation yield will remains same.
    Or it is only possible to return the successfully reworked quantity to the original order if the quantity check which is executed against the confirmed yield of the predecessor is deactivated using Customizing of the confirmation OPK4. In this case, only the confirmed yield is indeed proposed without the confirmed rework quantity. However, with the quantity check being deactivated it is allowed to overwrite the default value with a larger quantity.
    Note that you cannot enter a goods receipt for the rework order since it is defined without header material. Instead, you can enter goods receipts for the original order manually.
    Regards,
    R.Brahmankar

  • Wrong quantity posted during MIGO

    Dear Forum,
    During migo, quantity wrongly entered is 2.4 kg, whereas in excise entry screen for the same migo quantity entered is 2380 kg.
    Accordingly value was calculated correctly and manual excise figures were entered as per JMOQ condition.
    Now the question is why system is allowing two different quantity in same Migo entry. System should check this mismatch and should not allow this to happen.
    Kindly let me know if there is any configuration needed for the same..
    Regards
    Nainesh

    Hi,
    Please chekc whethr rounding profile is activated in the material master configuration.
    Check any conversion factors avialble.
    Hope this helps .
    Regards,
    Smitha

  • UD- Quantity posted u2013 u2018To sample usageu2019 error

    Hello Friends
    While doing UD & transferring stock from u2018quality to sample usageu2019 I am getting error as u2018Posting to sample allowed only up to a lot size of       0.000u2019
    Here in my case my sample type is 100% inspection & I am trying small quantity to u2018Sample usageu2019 still I am getting above error.
    Any one can help me what is going wrong?
    Thanks & regards
    Prashant

    Hi
    Sample type is 100% so lot sample size is also 100% meaning if lot is of 50 quantity the sample size is also of 50 quantity.
    Regards
    Prashant Gupta

  • Able to post Invoice for Blocked stock from quality

    Hi
    I did GR for material against PO for 50 pcs, During QA32 stock posting i posted 30 pcs to Unres. stock(101) and 20 pieces to blocked stock(350) storage locations.
    Now when I am trying to  create  MIRO invoice verification, I am getting all the 50 pcs and available to post also for the entire quantity. How the system is allowing me to carryout Invoice verification for the blocked stock 20 pcs also ???
    It should allow me to process the 30 pcs only which are in unres. stock .
    How do I block the blocked stock from getting invoiced ?
    Please help
    Thanks
    Samuel

    Dear Jurgen
    Thanks for the reply,  master does contain the control key, I also have the inpsection set_up for the materials. During PO in delivery tab at item level I am getting stock type as Quality Inspection. During GR, lot is getting generated and we are able to Stock post it using QA11. Every thing works fine till the stock is there in Quality till the run of Txn QA11. But once stock is out of quality we are having the issue for the stock posted to blocked, I can understand MIRO picking up Unrestricted Quantity of the Lot but why it is also picking the quantity posted to blocked stock as we do not want to pay the vendor for this stock quanitity till we clear it.
    Is there any normal config setting to stop it form geting picked during MIRO.
    Thanks

  • Field settings in Usage Decicion - QA11

    Hi -
    I need to know where the field settings are configured for the document Item data fields in QA11 while doing UD. For each quantity posted like TO unrestrecited stock, TO Scrap etc we are have different document item data button , once we click that button , it pops up with certain fields like Reason for Movement, Text, Cost center etc.. I need to make one fied optional entry to show on this POP up.
    I did my search & found that these fields are configured under Transaction OQFA for the module spool SAPMQEVA. But i am not able to do any settings in this Transaction OQFA to have cost center field as optional field for Other scrap option.
    Can anyone know the exact configuration path to make the field settings in Usage Decicion in QA11 for my above requirement?
    Regards
    Kumar

    Hi,
    According to me the exists you have selected are correctly relevant to the T Codes, but I think you should ask this to the ABAP champs directly at the [ABAP|ABAP Switching, Enhancing, and Adapting Standard Programs; forum.
    Best Of Luck,
    Regards,
    Shyamal

  • QA11-  to add new user field

    Dear Gurus,
    In the  t code QA11 , In the inspection lot stock TAB  ,  In quantity posted to unresticted   ,  Document tab is there, inwhich  additinal text  can be entered,  Is it possible to add two more fields  example  GRADE .? IS it possible to  update this characteristic  in  MSC2N  in classification tab.
    The user is asking that while reult recording they decide the grade , so they are asking for a field as i explained, such that when they change the charaterisctic it should update the MSC2N .
    Please help  in knowing the possiblity?
    Is there any User exit
    Thanks in adance

    Did you try to implement the class characteristic?
    The class characteristic could be suitable for your requirement and it is SAP standard scenario.
    (The inspection results are transferred automatically to batch classification value.)
    Regards
    Luke

  • To be posted wrongly displaying in QA03

    Hi
       We are facing a problem in inspection lot that when the user is doing QA11 and posting the stock to unrestricted use and scrap.
    Although they have posted the stock to unrestricted use and scrap ,last posted quantity is still showing as to be posted in QA13 and in QA03 in the postings field.
    How to resolve this?
    -mohan

    Hi
    This may be because of:
    1.if you have not entered sampling procedure in the task list then sample size is 100% of the lot.
    So system prompt you to put the 100% qty in the sample cell.
    2.sometimes system tasked time to update the QALS table.try after some time.
    3.What is the status of the lot.
    It is SPST or SPCO
    if it is SPCO then it means stock posting is performed 100%
    if it is SPRQ then it means stock posting is not yet finished ,so system prompt the Qty to be posted,
    I hope this helps
    Regards
    Sujit

Maybe you are looking for