Qaaws Designer Error - Login Warning - Unknown
We are having dswsbobje deployed on 4 WebSphere servers.
There is a load balancing url setup for splitting load over these 4 clusters
When we try to connect to the indivisual clusters using the Qaaws designer, we are able to log in successfully.
However, when we use the load balancing url to login. The url gets parsed succesfully. i.e. we do not get the "Web Service URL is not correct" error.
But when we enter the Administrator credential, the designer throws an error while connecting Title: Login Warning --- Error Message:Unknown
Has anyone connected to the Qaaws Designer using the load balancer url before.
Edited by: Piyush Pansare on Jan 21, 2011 7:51 PM
Session affinity is sometimes also referred to as session persistence or session stickiness, which should be described somewhere in your load balancer configuration documentation (sorry, but my expertise is limited there).
I got some further information about LB support restriction occuring in XI 3.1, so I can be more specific there :
As said previously, only hardware LB is supported with XI 3.1, and only with the following session stickiness modes :
. Source IP sticky
. Source IP + destination sticky
. SSL sticky
On the other hand, the following type are not supported :
. arrow-point sticky
. cookie sticky (as I mentionned previously)
. URL sticky
Besides, LB deployments also brings some support restriction in XI 3.1 when used in conjunction with Reverse proxies (as RP make all client look to have the same IP...).
We are currently working hard at increasing our support of session stickiness modes in the coming releases and support packages (cookie stickiness should be supported with XI 3.1 SP4 and 4.0 SP2, which will also bring arrow-point stickiness support).
Hope that helps,
David.
Similar Messages
-
GLM - Generation: WARNING: Unknown rotation case!
Dear Experts,
Client requirement is that, they want 4 label to be printed on one Label stock
I have configuration as follows
CASE1:
Label stock size: 21.9 X 37 CM ( W X H )
Label size: 18.6 X 7.2 CM ( W X H )
Label size configured in CG42 is 18.6 X 7.2 CM ( W X H )
In Label stock (CBGL_LS02), maintained above data and in addition, enter following data
No. of Label per Row: 1
No. of Label per Column: 4
Label Pitch: Vertical : 8.7 CM
Distance from Edge: Left 1.8 CM
Distance from Edge: Top: 0.7 CM
in this setup getting following error:
Generation: WARNING: Unknown rotation case! Got following data: PaperWidth=620.850009;PaperHeight=1048.950016;LabelWidth=527.310000;LabelHeight=204.120000;LandscapeFlag=0
Due to this 4 label is not getting printed. Getting only One Label on paper.
what could be reason of the same. Basically what is the mean of above Warning?
Can anybody help me for the same.
Thanking You,
Regards
AmolHi Mike,
Thanks a lot for the help.
I would like to convey you that, I want 4 labels vertically and not horizontally so i configured as follows
No. of Label per Row: 1
No. of Label per Column: 4
also, as mentioned by you,
Michael Hofer wrote:
> Sometimes this warning appears even if the label stock is setup correctly.
I did checked by recreating another lable stock.
Can you please guide me furhter..
due to this warning , 4 lables are not getting printed vertically on one Label stock.
seeking for kind guidance..
Regards
Amol -
When I started up my computer this morning, a warning popped up saying: ! Sync encountered an error while connecting: Unknown error. Please try again.
Why do I need to set up Sync on Firefox when I only use this one computer and do not even have a cell phone?If you do not want to use Firefox Sync any more, you can deactivate it. See instructions here: [[How do I manage my Firefox Sync account?]]
-
Adobe ID login failure: Unknown Error
I don't know where to get help on this so I'll try here. I have problem with my Samsung Galaxy Note 10.1 (Wifi) and with the ebook readers in particular. I downloaded couple of ebook apps from Play store (former Android market) and tried to download some ebooks from the ebook stores. When trying to download the books I'm getting Adobe ID login error with an "Unknown Error" label on the application.
I created this Adobe ID account with one of those apps so the problem is not that the program had failed to create the account for me and Adobe Reader seems to be able to log into the account without a problem. It appears that the problem lies somewhere around the DRM and device registrations. So relating to this I need to ask couple of question:
1) Do I need to register my Galaxy Note 10.1 somehow before I'm allowed to access DRM books?
2) If I do, how do I do that? I have registered the device with the Samsung, but apparently that does not cover this, right?
3) How can I check if my tablet is registered with the DRM correctly?Moving this discussion to the Adobe Captivate forum.
-
JPEG Library Error Warning: unknown JFIF revision number 2.01
Recently I started to recieve the following error in Dreamweaver CS4.
JPEG Library Error
Warning: unknown JFIF revision number 2.01
I read the sparse suggestions online which said a file might be corrupt. I currently maintain a lot of sub-websites under a large directory and it would be almost impossible to check every single image on the server. I get the error even if nothing is opened but the program. Is there another solution to finding out which image is causing this problem?Some of the Adobe software reportedly tosses that diagnostic when it finds a JPEG image file that slightly puzzles it.
I'd suspect you're running some older Adobe bits, if I've guessed right about the source of that error and if your Adobe versions are of roughly the same vintage as OS X 10.6.8.
Looking at the console log is... ah... how do I phrase this... not without its own form of hazard, due to the plethora of innocuous but ominious-sounding messages that can get logged there. Figuring out which of the messages are things to be concerned about isn't easy, unfortunately.
But this error? I'd ignore it, unless you've got some malfunctioning image software somewhere, and/or unless there are patches or updates for whatever package is tossing this available. -
IPhone 3GS first gives warning: unknown IMEI and unknown ICCID! Restoring failes with error 1002!
My iPhone 3GS suddendly couldn't connect to the mobile provider's network. As I was in a rural place, I though this was because of bad coverage. It was then still possible to use Wi-Fi. After a while the phone asked to connect to itunes and gave the following warning: unknown IMEI and unknown ICCID.
I tried recovering it but procedures failes after hours with error 1002.
Is there a fix for this problem or do I need to go to a service center?Thanks Carolyn, I've tried all the options, but still it does not finish the recovering process. It stops with still a half millimeter on the statusbar .
Will probably just have to go to a service center. I already read that more people have the same problem and no one found a solution. As I am abroad and my iPhone largely exceeded the warranty time, I wonder what they will charge. -
"CoreBluetooth[WARNING] Unknown error: 1309" message cause
I am sporadically getting the message "CoreBluetooth[WARNING] Unknown error: 1309” on the console when running a BlueTooth app I am developing. Even though the message states that it is a warning, it stops execution of the app. I have been able to work around this problem by turning the Bluetooth setting off and then back on. Can anyone tell me what is causing this and what I should do to avoid it?
I posted this problem on [email protected] Bluetooth <[email protected]> and received this response from Jason Conn:
If I had to hazard a guess, I’d say that the primary reason you haven’t received much of a response is because you’ve given no description of your issue beyond “sometimes I see error 1309 and things stop working”.
If you haven’t already, please file a bug on bugreporter.apple.com and include as much detail as possible - a description of what you’re trying to do, repro steps that lead to the issue, even a test app. Respond to me directly with the bug number, and I will follow-up.
I had hopedsomeone at Apple could look into the code and state the conditions that led to this warning message. I was not able to reproduce the problem sufficiently reliably to file a bug report. Maybe you can. -
Used Firefox for some time no problem until yesterday. Now it wont load web pages. Getting a string of warnings and errors. Tried reloading but getting same errors. Can't download pluggins. Error in Parsing, Unknown Property, Unknown Zoom, loads of messages like this for no apparent reason. Help please!
== 10 July 2010Same thing started after updating to 3.6.6 on Window XP. Some pages load after doing "shift - Reload page", but not always. Error Console is showing a lot of "Errors" and lots of "Warnings" from pages that do not load. But before 3.6.6 update the pages loaded OK.
-
Adobe Media Encoder (Error compiling movie) Unknown error when writing to Isilon OneFS 6.5.5.18
Adobe Media Encoder (Error compiling movie) Unknown error when writing to Isilon OneFS 6.5.5.18 while using Adobe Premiere Pro.
Process: Adobe Premiere Pro CC 2014
Path: /Applications/Adobe Premiere Pro CC 2014/Adobe Premiere Pro CC 2014.app/Contents/MacOS/Adobe Premiere Pro CC 2014
Identifier: com.adobe.AdobePremierePro
Version: 8.1.0 (8.1.0)
Code Type: X86-64 (Native)
Parent Process: launchd [2538]
Responsible: Adobe Premiere Pro CC 2014
Date/Time: 2015-01-06 14:04:23.500 -0700
OS Version: Mac OS X 10.9.2 (13C64)
Report Version: 11
Crashed Thread: 55 Dispatch queue: com.apple.root.default-priority
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000000000
Customer created test export with 777 permissions and set mount parameters to the following:
mount_nfs -o vers=3,tcp,rdirplus,intr,nolocks,async,rsize=32768,wsize=32768
-- Original mount options:
General mount flags: 0x40 async
NFS parameters: vers=3,tcp,nolocks,rsize=32768,wsize=32768,rdirplus
-- Current mount parameters:
General mount flags: 0x4000058 async,nodev,nosuid multilabel
NFS parameters: vers=3,tcp,port=2049,nomntudp,hard,nointr,noresvport,negnamecache,callumnt,nolocks,quota, rsize=32768,wsize=32768,readahead=16,dsize=32768,rdirplus,nodumbtimr,timeo=10,maxgroups=16 ,acregmin=5,acregmax=60,acdirmin=5,acdirmax=60,nomutejukebox,nonfc,sec=sys
The pcap shows once the movie is created a lockup call is responded from Isilon with Error: NFS3ERR_NOENT
478 V3 CREATE Call (Reply In 479), DH: 0xea5f731c/QBRSN-0-0-1.mov Mode: UNCHECKED
479 V3 CREATE Reply (Call In 478)
484 V3 LOOKUP Call (Reply In 485), DH: 0xea5f731c/._QBRSN-0-0-1.mov
485 V3 LOOKUP Reply (Call In 484) Error: NFS3ERR_NOENT
V3 LOOKUP Reply (Call In ....) Error: NFS3ERR_NOENT - This is by design of OneFS, we coalesce files and then flush them out to disk which is why the commit time is accurate but the file is not immediately available. however when an async option is used within the mount options this should be avoided if writing asynchronously to the cluster. Has anyone else seen this behavior lately? (current workaround is to store locally and transfer to the cluster via Finder)That error can happen for many reasons...one of the reasons that I occassionaly get it is because I try exporting a movie to an external drive that has been formated in the old FAT32 instead of the NTSF standard. FAT32 only allows for file sizes up to 2 gigs. And as soon as it reaches that...I would get that error. I don't know if that is why you are getting that error...but it would be easy to check. 1) are you generating a file that is over 2 gigs? 2) is your drive that you are exporting to FAT 32 (just right click the drive in My Computer and select "properties" then just look for what it says next to "file system".
-
Hi,
I am developing apps on for 4.1 and on Xcode3.2. My Apps crash when press back buton . When press back back button Last class is appeared slightly than crash, with no error or warning ....Here are the code....crash on Back Funtion
#import "TransactionSummaryDetailViewController.h"
#import "TransactionSummaryData.h"
#import "Constant.h"
#import "DataBase.h";
#import "Common.h"
#import "YPCardHolderServiceService.h"
#import "SelectionScreenViewController.h"
@implementation TransactionSummaryDetailViewController
@synthesize table,cardReference;
@synthesize waitIndicator,transactionsummary,keyArray,valueArray,isSummaryAvailable;
@synthesize startDate,endDate;
// The designated initializer. Override if you create the controller programmatically and want to perform customization that is not appropriate for viewDidLoad.
- (id)initWithNibName:(NSString *)nibNameOrNil bundle:(NSBundle *)nibBundleOrNil {
if (self = [super initWithNibName:nibNameOrNil bundle:nibBundleOrNil]) {
// Custom initialization
return self;
-(void)getrowcount{
if(transactionsummary.cardholdernmae !=nil){
[keyArray addObject:@"Card Holder Name: "];
[valueArray addObject:transactionsummary.cardholdernmae];
if(transactionsummary.cardnumber!=nil){
[keyArray addObject:@"Card Number: "];
[valueArray addObject:transactionsummary.cardnumber];
if(transactionsummary.debittransactioncount != nil){
[keyArray addObject:@"Debit Tx. Count: "];
[valueArray addObject:transactionsummary.debittransactioncount];
if(transactionsummary.debittransactionvalue!=nil){
[keyArray addObject:@"Debit Tx. Value"];
[valueArray addObject:transactionsummary.debittransactionvalue];
if(transactionsummary.credittransactioncount!=nil){
[keyArray addObject:@"Credit Tx. Count: "];
[valueArray addObject:transactionsummary.credittransactioncount];
if(transactionsummary.credittransactionvalue!=nil){
[keyArray addObject:@"Credit Tx. Value: "];
[valueArray addObject:transactionsummary.credittransactionvalue];
// Implement viewDidLoad to do additional setup after loading the view, typically from a nib.
- (void)viewDidLoad {
appDelegate = [[UIApplication sharedApplication]delegate];
keyArray = [[NSMutableArray alloc]init];
valueArray = [[NSMutableArray alloc]init];
[self getrowcount];
NSLog(@"Key Array Count is %d",[keyArray count]);
[table setBackgroundColor:[UIColor clearColor]];
[table setSeparatorColor:TableViewCellSeperatorColor];
[waitIndicator setHidden:YES];
[self setTitle:@"Summary Details"];
UIButton *button = [UIButton buttonWithType:UIButtonTypeCustom];
[button setImage:[UIImage imageNamed:@"list.png"] forState:UIControlStateNormal];
[button addTarget:self action:@selector(BacktoView) forControlEvents:UIControlEventTouchUpInside];
[button setFrame:CGRectMake(0, 0, 76, 44)];
self.navigationItem.leftBarButtonItem = [[UIBarButtonItem alloc] initWithCustomView:button];
if(!isSummaryAvailable)
if([Common isNetworkAvailable])
[waitIndicator startAnimating];
YPCardHolderServiceService *services = [[YPCardHolderServiceService alloc] init];
YPTransactionsSummaryRequest *summaryRequest = [[YPTransactionsSummaryRequest alloc] init];
summaryRequest.SC = appDelegate.SC;
summaryRequest.userName = appDelegate.userName;
summaryRequest.valid =TRUE;
summaryRequest.cardReference =[NSString stringWithFormat:@"%@",cardReference];
NSLog(@"Start Date Is %@ and End Date is %@",startDate,endDate);
summaryRequest.startDate = startDate;
summaryRequest.endDate = endDate;
summaryRequest.applicationType = @"M";
[services getTransactionsSummary:self action:@selector(getTransactionsSummaryHandlers:) transactionsSummaryRequest:summaryRequest];
[summaryRequest release];
[services release];
[super viewDidLoad];
//Handle the Response of getTransactionsSummary
-(void)getTransactionsSummaryHandlers:(id) value
[waitIndicator stopAnimating];
// Handle errors
if([value isKindOfClass:[NSError class]]) {
NSLog(@"%@", value);
return;
// Handle faults
if([value isKindOfClass:[SoapFault class]]) {
NSLog(@"%@", value);
return;
// Do something with the YPLoginResponse* result
YPTransactionsSummaryResponse* result = (YPTransactionsSummaryResponse*)value;
if(result.statusCode == 0)
NSLog(@"Number of Transaction is =%d",[result.transactionSummaryList count]);
NSLog(@"Step 1 ='%@'",appDelegate.userID);
NSString *deleteQuery = @"delete from TransactionSummary where userid = ";
NSLog(@"Step 1 ='%@'",appDelegate.userID);
deleteQuery = [deleteQuery stringByAppendingString:[NSString stringWithFormat:@"%@ and cardreference = '%@'",appDelegate.userID,cardReference]];
NSLog(@"delete query= '%@'",deleteQuery);
[DataBase deleteDataFromTable:deleteQuery];
NSLog(@"delete query= '%@'",deleteQuery);
//for (int i =0; i< [result.transactionSummaryList count]; i++)
for (int i =0; i< [result.transactionSummaryList count] -2; i++)
NSLog(@"for loop= %d",i);
YPTransactionSummaryDetails *transactionSummary = (YPTransactionSummaryDetails*)[result.transactionSummaryList objectAtIndex:i];
NSLog(@"cardholdername= '%@'",transactionSummary.cardholderName);
/*NSString *insertQuery = @"Insert into TransactionSummary(cardholdername,cardnumber,debittransactioncount,debittransac tionvalue,credittransactioncount,credittransactionvalue,userid) values(";
insertQuery =[insertQuery stringByAppendingString:[NSString stringWithFormat:@"'%@','xxxx xxxx xxxx %@',%d,%d,%d,%d,'%@',%@)",
transactionSummary.cardholderName,transactionSummary.cardNumber,transactionSumm ary.debitTransactionCount,
transactionSummary.debitTransactionValue,transactionSummary.creditTransactionCo unt,transactionSummary.creditTransactionValue,
appDelegate.userID]];*/
//Add by sarvesh
NSString *insertQuery = @"Insert into TransactionSummary(cardholdername,cardnumber,debittransactioncount,debittransac tionvalue,credittransactioncount,credittransactionvalue,cardreference,userid) values(";
insertQuery =[insertQuery stringByAppendingString:[NSString stringWithFormat:@"'%@','%@',%d,%d,%d,%d,'%@',%@)",
transactionSummary.cardholderName,transactionSummary.cardNumber,transactionSumm ary.debitTransactionCount,
transactionSummary.debitTransactionValue,transactionSummary.creditTransactionCo unt,transactionSummary.creditTransactionValue,cardReference,
appDelegate.userID]];
NSLog(@"Insert Query for Transaction Summary is %@",insertQuery);
[DataBase InsertIntoTable:insertQuery];
//Read Update Data From DataBase and Refresh Table
NSString *query = @"Select * from TransactionSummary where userid = ";
query = [query stringByAppendingString:[NSString stringWithFormat:@"%@ and cardreference = '%@'",appDelegate.userID,cardReference]];
NSLog(@"select query= %@",query);
NSMutableArray *temp=[DataBase getTransactionSummaryTableData:query];
if([temp count] > 0)
transactionsummary = (TransactionSummaryData*)[temp objectAtIndex:0];
[keyArray removeAllObjects];
[valueArray removeAllObjects];
[self getrowcount];
[table reloadData];
-(void)viewDidAppear:(BOOL)animated
CGFloat navBarHeight = 50.0f;
CGRect frame = CGRectMake(0.0f, 20.0f, 320.0f, navBarHeight);
[self.navigationController.navigationBar setFrame:frame];
[super viewDidAppear:animated];
-(IBAction)BacktoView
NSLog(@"in back function..TrasactionSummaryDetail");
SelectionScreenViewController *screenView=[[SelectionScreenViewController alloc] initWithNibName:@"SelectionScreenViewController" bundle:nil];
[self.navigationController popViewControllerAnimated:YES];
[screenView release];
- (UITableViewCellEditingStyle)tableView:(UITableView *)tableView editingStyleForRowAtIndexPath:(NSIndexPath *)indexPath{
return UITableViewCellEditingStyleNone;
- (NSInteger)numberOfSectionsInTableView:(UITableView *)tableView{
return 1;
- (CGFloat)tableView:(UITableView *)tableView heightForRowAtIndexPath:(NSIndexPath *)indexPath
return cellHeightForGroupedTable;
- (NSInteger)tableView:(UITableView *)tableView numberOfRowsInSection:(NSInteger)section{
if(section == 0)
return [keyArray count];
else
return 0;
- (NSString *)tableView:(UITableView *)tableView titleForHeaderInSection:(NSInteger)section{
NSString *title = nil;
switch (section){
case 0:{
//title = @"Summary Details";
break;
return title;
- (CGFloat)tableView:(UITableView *)tableView heightForHeaderInSection:(NSInteger)section {
if ([self tableView:tableView titleForHeaderInSection:section] != nil) {
return tableHeaderHeight;
else {
// If no section header title, no section header needed
return 0;
- (UIView *)tableView:(UITableView *)tableView viewForHeaderInSection:(NSInteger)section {
NSString *sectionTitle = [self tableView:tableView titleForHeaderInSection:section];
if (sectionTitle == nil) {
return nil;
// Create label with section title
UILabel *label = [[[UILabel alloc] init] autorelease];
label.frame = CGRectMake(20, 6, 300, 30);
label.backgroundColor = [UIColor clearColor];
label.textColor = HeaderTextColor;
label.shadowColor = HeaderTextShadowColor;
label.shadowOffset = CGSizeMake(0.0, 1.0);
label.font = HeaderTextFontSize;
label.text = sectionTitle;
// Create header view and add label as a subview
UIView *view = [[UIView alloc] initWithFrame:CGRectMake(0, 0, 320,60)];
[view autorelease];
[view addSubview:label];
return view;
- (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath{
UITableViewCell *cell = nil;
NSString *cellIdentifier;
cellIdentifier = @"SectionsTableIdentifier";
int row = [indexPath row];
CGRect nameLabelRect = CGRectMake(19 , 8, 240, 29);
CGRect cardlabelRect = CGRectMake(19,31,240,15);
UILabel *nameLabel = [[UILabel alloc] initWithFrame:nameLabelRect];
UILabel *cardnumber = [[UILabel alloc] initWithFrame:cardlabelRect];
cell = [tableView dequeueReusableCellWithIdentifier:cellIdentifier];
if(cell == nil){
cell = [[[UITableViewCell alloc] initWithFrame:CGRectZero reuseIdentifier:cellIdentifier] autorelease];
// Remove all subview from cell content view
for (UIView *view in cell.contentView.subviews){
[view removeFromSuperview];
[cell setAccessoryType:UITableViewCellAccessoryNone];
[nameLabel setTextColor:firstLabelFontColor];
[nameLabel setFont:firstLabelFont];
[nameLabel setFont:firstLabelFontSize];
nameLabel.textAlignment = UITextAlignmentLeft;
nameLabel.text = [NSString stringWithFormat:@"%@ : %@",[keyArray objectAtIndex:row],[valueArray objectAtIndex:row]];
[cell.contentView addSubview: nameLabel];
cell.selectionStyle = UITableViewCellSelectionStyleNone;
[cell setBackgroundColor:[UIColor clearColor]];
[cell setBackgroundColor:TableViewCellColor];
[nameLabel setBackgroundColor:[UIColor clearColor]];
[cardnumber setBackgroundColor:[UIColor clearColor]];
[cardnumber release];
[nameLabel release];
return cell;
// Override to allow orientations other than the default portrait orientation.
- (BOOL)shouldAutorotateToInterfaceOrientation:(UIInterfaceOrientation)interfaceO rientation {
// Return YES for supported orientations
return (interfaceOrientation == UIInterfaceOrientationPortrait);
- (void)didReceiveMemoryWarning {
// Releases the view if it doesn't have a superview.
[super didReceiveMemoryWarning];
// Release any cached data, images, etc that aren't in use.
- (void)viewDidUnload {
// Release any retained subviews of the main view.
// e.g. self.myOutlet = nil;
- (void)dealloc {
[table release];
[waitIndicator release];
[keyArray release];
[valueArray release];
[transactionsummary release];
[super dealloc];
@endThis is the user-to-user tech support site. For carrier issues go to the Dev forums.
You might want to note that the current iOS is 4.3.3, and the current SDK is 4.3 and XCode 4.0.2 -
Help!
When trying to deploy a test system i got the following error:
Error Code:-17500
Unknown System Error in TestStand - Read Seq Files in Workspace.vi->TestStand - Find Dependent Files.vi->TestStand - Add File and Dependent Files.vi->TestStand - Add All TestStand User Files to File Info Array.vi->TestStand - Update File Info.vi->TestStand - Distribution Wizard GUI.vi->TestStand - Deployment Utility Splash Screen.vi
I then tried to re-deploy previously successfully deployed systems - same error. (I have done nothing to my teststand setup/installation/engine or deployment files since the last successful deployment)
I removed teststand & then re-installed it - i still got the same error. These files it is searching for do not exist on my pc.
Any ideas what has gone wrong/how to fix it?
cheers
FiI've just had exactly the same problem and after posting a message, have been forwarded to this thread. Luckily it looks as though we've found a solution, or a cause of the problem. One of my work colleagues (SercoSteve on discussion forums) suggested removing the Teststand 3.1\cfg directory, and replacing it with a default one from another machine, and this seems to have done the trick and made the deployment wizard be able to analyse the files and build. We are editing files in cfg so I've now got the task of replacing each file in this directory one by one to find which is causing the problem.
I'll add another post when I find out which one it is.
David Clark
CLA | CTA
CLA Design Ltd
Hampshire, England -
Firefox 6 Linux - Sync encountered an error while syncing: Unknown error.
Linux (Ubuntu 11.04).
Firefox 6.
The syncing doesn't work anymore. This message is displayed at the bottom all the time:
"Sync encountered an error while syncing: Unknown error. Sync will automatically retry this action."
Retrying doesn't help.I had some luck doing the following - Go to https://account.services.mozilla.com/ and login using your sync info. Find the link to Clear Cache data and clear your sync cache (first time failed, then worked). Then do a manual sync to get back in sync. Seems to have cleared up my issue for the time being.
-
Firefox Sync encountered an error while syncing: Unknown error
I am trying to connect to the site - https://login.salesforce.com/?ec=302&startURL=%2F5003000000EIhFk and i just cannot login. the site is accessible, but could not log in and I have this error in the status area on the bottom - Firefox Sync encountered an error while syncing: Unknown error
I think I managed to fix this.
Go to [https://account.services.mozilla.com/ your sync account], log in, and click clear your sync data.
Then click the Sync now button on the error message.
The error went away for me. -
IS-Retail: design error of u0091general assortmentu0092 concept&POS Outbound WPDWGR
Hello
I have found a design error of general assortment concept related to POS Outbound WPDWGR, but may be you could help to understand why system is designed with error.
Both 'Store Business Offline (ePOS)' and 'Assortment Management' are recommended by SAP as 'best practices'.
'Assortment Management' recommends to use assignment of merchandise categories with general assortments, REFSITE and WSOA6. This documentation promotes concept of 'general assortments' and assignment of assortment users.
IDoc WPDWGR 'Download merchandise categories' is recommended in 'Store Business Offline (ePOS)' best practices for Retail. Program that generates this IDoc knows nothing about general assortments, REFSITE, WSOA6. It uses old assignment of merchandise categories to local assortment in WB02 or WB30. It was not updated to be compatable with 'general assortment' concept.
There is no warning in documentation that if customer will use one of 'best practices' for Retail then another will be not applicable.
Assortment management:
http://help.sap.com/bp_retailv1470/Documentation/EN/Assortment%20Management_EN_DOCU_V147.doc
http://help.sap.com/bp_retailv1470/Documentation/EN/Assortment%20Management_EN_CUST_V147.doc
Store Business Offline (ePOS)
http://help.sap.com/bp_retailv1470/documentation/EN/Store%20Business%20Offline%20EPOS_EN_DOCU_V147.doc
http://help.sap.com/bp_retailv1470/documentation/EN/Store%20Business%20Offline%20EPOS_EN_CUST_V147.doc
Does anyone faced this problem and have any ideas how to solve it through SAP Support?
Does anyone has experience of solving long-time 'ping-pong' OSS customer messages with SAP Support?
Thanks in advance.
BR,
Novomir Kovalenko -
Window Errors and Warning in this Transaction not shown
We're using Designer 6.5.82.3.0.
Business rules aren't generated according to CDM Ruleframe, no CAPI. But Table API/trigger logic.
=> Pre-Before-Insert-Row
BEGIN
if CDR_CPN.F_CPN_UNIQUE(:new.CODE)
then
-- a new code
null;
else
-- code already exists
QMS$ERRORS.SHOW_MESSAGE
('CDR-05000'
,:new.CODE);
end if;
END;
When an business rule fails the window Errors and Warning in this Transaction with the error-message is not shown. Instead we get the message Transaction failed
(when using sqlplus the same message appears, then running @messages.sql =>correct message)
According to a previous discussion the ON-ERROR of the module component should be modified (author Bart van Ges 22 May 2002). And this works, the window Errors and Warning in this Transaction is shown with the correct message.
Has anyone another solution, patch or any idea why the window doesn't appear without the modification?
Cheers,
BobAll,
Since Headstart for 6.0 (patch 12) and Headstart for 6i, Headstart default only functions well in combination with CDM RuleFrame. If you want to deviate from this standard, the functionality in the libraries should be adapted for this purpose. There are several ways to do this:
- show serverside errors in an error Alert window
- show serverside errors in the RuleFrame transaction and errors window.
Whatever approach you choose - in this thread several suggestions are being made - it is not documented in headstart how to do this. The Oracle Headstart group is not able at this moment to investigate time to workout the alternatives, though I will add an enhancement request to headstart to document these options in the headstart user guide.
Two extra suggestions:
- try to test your workaround as well as possible (try to raise errors from server, client, try to violate server constraints (pk, uk, fk, ck) and try to let serverside pl/sql fail.
- if you do not make use of ruleframe, you might run into a problem if you try to commit in the serverside logic, in this case remove the calls in the template package (qms$even_form) to open and close the transaction (pre-commit and post-forms-commit trigger events).
Regards,
Marc Vah[i]Long postings are being truncated to ~1 kB at this time.
Maybe you are looking for
-
How can I copy selected photos from iPhoto on my iMac to my iPhone 6?
I used to have many photos on my iPhone 6. I also have thousands of photos on my iMac. After iDrive became available I decided to try it, and uploaded my large photos library to my iPhone and iPad. After using it for awhile I decided against keeping
-
Speedometer properties in Chart Designer
Hi, Can anyone please let me know, how I can specify the Red, Yellow and Green value ranges in the speedometer axis (in Webdynpro Business Graphics)? Is it possible to do so using the Chart Designer? Thanks, Shibendra
-
The SIM card inserted in this iPhone does not appear to be supported. This iPhone is not currently setup to work with carrier you're attempting to use. Please insert another SIM card from a supported carrier or request that this iPhone be unlocked.
-
HT1382 I went to File then to libary but there is no back up option there
I am trying to back up my purchases and When i go to "File" followed by "Libary" there is no option saying "Back-up"
-
Hi All, We have installed Solution Manager Ehp1. We are unable to find the prerequisites for the satellite system after following many notes mentioned below i am confused . I have followed these notes (Note u2013 1010428, 1274287, 1228898,539977,694