QAAWS in not found in prod Qaaws after promoting from dev to prod

Hi Expert,
I have promoted my all qaaws from dev to production server,
all the qaaws are shows in CMC production but, while i am open in Query as a web service
it not showing any qaaws.
I have restart the BO production server , still the same problem is happend
Tell me how to rectify that issue.
Thanks and Regards
Lalit Kumar

Well i have some strange thoughts:
when the idoc is send in sender-system the values on sender informations are:
Port: SAPPSI
Partner number: PSICLNT010
Type: LS
The error we receive is:
no service for system SAPPSI, client 010 in Integration Directory
Shouldn't there be the Partner-Number like PSICLNT010?!
Can someone confirm and tell me if i am right?!
br

Similar Messages

BADI not found in QA System after transporting from DEV system

Hi,
I had created a new implementation ZHR_IN_CALC_PTX_AMT to the BADI: HR_IN_CALC_PTX_AMT in the DEV system with Request ID. But when i had transported that request, i am not able to find that BADI implementation in SE18 and SE19 respectively in Quality system.
Please suggest me on this, as this is urgent.
Regards.
Ravi

Hi,
Can you pls repeat the BADI Definition name? I couldn't find HR_IN_CALC_PTX_AMT in SAP versions 4.7, 5.0 and 6.0. Which is the version you use for development?
Regards,
Renjith Michael.

Not updating Prompts when report is moved from Dev to Prod

Hi,
I have a report In development which uses a Prompt ( Dynamic Lov) pointed to an existing prompt group.
When this report is moved to production the prompt does not give any values as the it is not pointed to any prompt group.
Could any one help me why the prompt is not being updated when it is moved from DEV to PROD.
Thank you..!!

Need more info...
What version and are you using BOE or CRS?
Thank you
Don

Vendor not found while creating SC after replicating from r/3 to srm

Hi all
I tried to replicate some vendors from r/3 to srm and when i used the t-code bbpgetvd i got a message that it has already been replicated but wheni am trying to create a Shopping Cart and assigning vendor to the cart it is giving me a message that no supplier is assign and no possible source of suply found in the system?PLS answer my question its urgent.

Hi Pooja,
I understand that you have moved your partner information from R/3 to SRM. In SRM, all the Partner(vendor) information is stored in BUT000 master table. The type of partner = 02.
Go to transaction BP in SRM and check for the partner data. If found, go to master table BUT000 and check there. If you dont find your data overthere track the msg flow.
Else you should be able to create the cart.
Regards,
Karthik Babu
Edited by: karthik babu pulluru on Jan 13, 2012 7:38 AM

HT3529 Contacts not found in contact list after saving from new text message

When a new number texts me and I save it to my contacts, I can find that contact when texting, but contact does not show up on my phone list contacts. For Example: I received a text message from (555) 555-5555. I #1 clicked "Contact" in the top right corner of the text message screen, #2 clicked "i" button, #3 clicked "Create New Contact," #4 added first and last name, and #5 clicked "Done."
In the future, if I try and text that saved number, the contact will appear under the saved name. But if i press the phone icon and look at my contact list, the contact is not there. So if I try and text "Heather Campbell" i can find the contact by clicking new message and typing "Hea" and send her a text message with no problem. However if I go to my phone contact list and try to call her, she is not listed as a contact.
Please Help!

Unfortunetly, that's not the problem. I have 3 groups. 1. All iCloud 2. All Hotmail 3. All Facebook. I have the All iCloud checked, i do not want facebook friends and email addresses in this contact list. This will only give me a list of phone numbers I saved from call log. Not phone numbers I saved through text message. Thank you though!

"No service for system..." after transporting from dev to prod

Hi,
again i have a problem like some other guys also had. I already checked several postings concerning this issue!
We transported dev-objects to prod, also ID-object like Business Systems.
The sender side now changed their communication for sending IDoc's to our Prod-XI. While sending IDoc's form Prod R/3 they get "no service for system SAPPSI, client010.." etc.
I already checked:
1. idx1 port is SAPPSI pointing to right destination PSI
2. idx2 all necessary Metadata are loaded
3. checked adapter specific identifiers in ID and also reloaded them with no change!
4. in receiver IDoc CC i added RFC-Dest: PSI and Port is SAPPSI
5. did a cache refresh!
I need to let you know that we are using one SLD and already communicated with the sender-prod r/3 -system to SAP XI -DEV.
can someone please help us?! we have no clue what might be wrong!!
br

Well i have some strange thoughts:
when the idoc is send in sender-system the values on sender informations are:
Port: SAPPSI
Partner number: PSICLNT010
Type: LS
The error we receive is:
no service for system SAPPSI, client 010 in Integration Directory
Shouldn't there be the Partner-Number like PSICLNT010?!
Can someone confirm and tell me if i am right?!
br

Automation error element not found in vb6 2147319765 after upgrading the os

Hi we had updated our OS to windows 7 from XP.Previously we had an application in XP which is built on Vb 6 .The application throws an error message like Automation error --element not found with error code 2147319765 .The application shows the same error
message even after I ran the application in XP compatability mode.
The application is using data from other servers and all the servers are windows server 2003.
muneer

Double post:
http://social.msdn.microsoft.com/Forums/vstudio/en-US/229b4e46-9bcb-411e-901e-fec376dc36da/automation-error-element-not-found-in-vb6-2147319765-after-upgrading-the-os
This forum is about VB.Net. If your question is about a VB6 project, have a look here:
Where to post your VB 6 questions
Armin

HELP"apple application support not found when installing itunes after a hard drive crash and replace

HELP" error "apple application support not found" when downloading itunes after a hard drive crash and replacement????

Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you? If so, does iTunes launch properly now?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

How can I get my ES2 loops to play correctly? I keep getting the message that the audio is not found when I drag the loops from my audio browser even though they play fine in the preview.

How can I get my ES2 loops to play correctly? I keep getting the message that the audio is not found when I drag the loops from my audio browser even though they play fine in the preview.

It's exactly as I stated. Whenever I try to drag these kinds of loops (ESX24 / software instrument loops? the ones marked in green with the white music note next to them) from the loop browser into the timeline a message comes up saying Audio Not Found for that loop. And a new track is created automatically when loops are dragged into the timeline, so I'm not creating some other random / synth instrument track so I'm not sure what the deal is... But perhaps I'll try creating a software instrument track first and then drag the loop into that track and see what happens - maybe there's something with the default settings that automatically creates audio tracks whenever loops are imported?

Operation not found error while calling AM methods from managed bean

Hi,
operation not found error while calling AM methods from managed bean.
written a method with two parameters in AM.
exposed the method in AM client interface
in the page bindings added the method in method action ..left empty in the value fields of the parameters.
calling the method from managed bean like below
String userNameVal = (String)userName.getValue();
String passwordVal = (String)password.getValue();
OperationBinding operationBinding =
ADFUtils.findOperation("verifyLogin");
operationBinding.getParamsMap().put("userName",userNameVal);
operationBinding.getParamsMap().put("password",passwordVal);
operationBinding.execute();
i am getting operation verifyLogin not found error.Please suggest me something to do.
Thanks
Satya

Hi vlsn,
Can you try with the below code
// in your backing bean
OperationBinding operation = bindings.getOperationBinding("verifyLogin");
//Put your both parameters here
operation.getParamsMap().put("parameter_name1", parameterValue1);
operation.getParamsMap().put("parameter_name2", parameterValue2);
operation.execute();
if (operation.getResult() != null) {
Boolean result = (Boolean) operation.getResult();
and share the result.
regards,
Rajan

Problems when transporting from DEV to PROD

Hi experts, I have problem during transport from DEV to Production.
We have a DEV, QAS and PRODUCTION and we have transport from DEV to QAS very well. But when we transport from DEV to PROD, recibe an error like:
After beginning the import method RS_IOBC_AFTER_IMPORT for Objects types IOBC mode (activation)
Failed to verify catalog InfoObjetos ZCM_UNIMET_CHA01
The InfoObjeto ZCM_RENC version does not exist in active
The InfoObjeto ZCM_RENM version does not exist in active
1.The Query is: Wy if the transport go OK from DE to QAS, then The transport from DEV to PROD terminated in error?.
2. There are any items to check in production before to transport?.
PD: All of the Objects in DEV are in ACTIVE status
Tanks,
Ramon Sulvaran

The transport ended in QAS with error code (4) and ended in Producion with error code (8), the detal of the error in Production begin with:
Home After import RS_ODSO_AFTER_IMPORT method for type (s) ODSO object (trigger mode)
Activation of DataStore objects of type Object
Check DataStore objects of type Object
DataStore Object Verification ZCM_DS01
The DataStore object is consistent ZCM_DS01
Burning the DataStore objects of type Object
Internal activation (DataStore Object)
Pretreatment / Creating DDIC objects to DataStore Object ZCM_DS01
Table / View / BIC/AZCM_DS0100 (type 0) DataStore object recorded ZCM_DS01
Create / Delete the indexes for the active table
Table / View / BIC/AZCM_DS0140 (type 4) recorded ZCM_DS01 DataStore object
Type of table / BIC/WAZCM_DS0100 recorded
Table / View / BIC/VZCM_DS012 (type VIEW) recorded ZCM_DS01 DataStore object
Log ZCM_DS01 DataStore object changes was recorded successfully
Writing Object Catalog entries (Tadiran)
He has written the object TABL / BIC/AZCM_DS0100 in catálgo objects (Tadiran)
He has written the object TABL / BIC/AZCM_DS0140 in catálgo objects (Tadiran)
He has written the object TABL / BIC/VZCM_DS012 in catálgo objects (Tadiran)
He has written the object TTYP / BIC/WAZCM_DS0100 in catálgo objects (Tadiran)
Activate all ABAP Dictionary objects (5):
Error / Warning in progr.activación Dict., Detailed log> Detail
Activate table / BIC/AZCM_DS0100.
Lack of expansion to the category table
Lack of extension category for include or subtype .......
When i go to BW Production to check teh object. I see tha the Object was create but in inactive status (grey color). When y Try to Actiavate it y see the error: Error/ Warning in program Activation Dcit. Detailed Log -> Detail

Move code from DEV to PROD

Hi,
I need to move my code dev to production.
Please let me know how.
I have seen the posts on exporing scenario and then importing them.
However what about the dependencies like logical schema, models etc???? How do i move them?
Also, what about contexts?
I have a csv to db table scenario, which i need to move.
For DB JNDI can be used, but what about file paths??
Please let me know.
Thanks,
Rosh

Hi RoseParab,
We have two way to migrate from Dev to Prod.
First Way:
Using ODI import and export option.
Login to Dev instance,
Goto Topology> File Menu>Export>Export Master Repository in ZIP format
File Menu>Export>Export Logical Schema in ZIP format
In Designer, go to File menu>Export>Export Work Repository in ZIP format
Quit from Dev instance
Login to Production instance
Goto Topology> Import>Import Master Repository in ZIP format (please select INSERT and UPDATE option from dropdown list)
Import>Import Logical Schema in ZIP format (please select INSERT and UPDATE option from dropdown list)
In Designer Import>Import Work Repository in ZIP format (please select INSERT and UPDATE option from dropdown list)
Second Way:
Using Oracle DB Export/Import command (Data pum)
Hope it will helps you
Note: Make sure that you should change Work Repository ID after moving Dev stuff to Production
Regards,
Phanikanth

Error while importing request from DEV to PROD

Dear Experts,
                  i am having the problems with request no.. There are two transport request nos and these have to be transported
                 from DEV to PROD. I relesed these two but while importing into PROD showing everthing completed successfully
                  with one error and error is Generation or programs and screens for both transport requests .
                  I am just enable to understand what this message is for ..
                   Please someone help me out in this....
with regards.
Praveen.
Moderator message: please search for available information/documentation before asking, read the detailed transport logs, correct the errors, try again.
Edited by: Thomas Zloch on Dec 13, 2010 6:05 PM

Hi,
First check the source system: ZSTGLDV110 is exists or not. check the rfc connections (Also check the source system assignment in both the system to each other). check the settings in the stms tcode. check the suppoet pack on your quality system,.... there are plenty of reasons.
thanks.

Catalog Migration from Dev to Prod

Hello,
Certain users of our system are unable to login to OBIEE after we migrate to Prod. Getting the below error
access denied for user to path /users/*USERNAME*/_portal/dashboard layout
USERNAME is the userid used to login to obiee
In our Prod, Users have access to Answers and hence they save their reports under My Folders.
While we migrate the new set of dashboards and reports from Dev to prod, we overwrite the System, System.atr, Shared, Shared.atr files of Prod with the corresponding files from Dev. Thus retaining the Users and Users.atr files of Prod.
Security: All are users/pwd are stored in the RPD
Is there something wrong with the migration procedure or is it a bug?
Any help would be appreciated.
Thanks,
Joe

+2) Why did you migrate the "System, System.atr" ? Try without this one, but just the "shared" folders and files.+
System, System.atr are migrated since this folder stores the Privileges and data formatting etc. These configurations need to be migrated to prod as well.
However I tried what you suggested and USERNAME is able to login and see the dashboards. But the Privileges and data formatting changes in Dev didnt get into Prod
There is a Security folder under System. Do you know what it is used for. Should I try to retain this folder in Prod?I don't really know.
The object permissions (like report permissions) are supposed to be in ATR file (i think so...), but there are other permissions and security things everywhere.
But i appears to be a clue to solve your problem.
+3) Do you have a backup of the previous Prod webcatalog ? If so, try to copy the USERNAME/_portal content into the new one.+
This might work, but I really need to identify what is the root cause for this since we have migrations bi-weekly and this issue might pop-up again for a different userOf course. I just suggested that to see if if the /username/_portal were really different, despite you didn't upgrade them.

Transporting standard table from DEV to PROD

Hi All,
I have updated a table called T166K and T166P for Purchase Order Printouts.
I have entered few values in the above mentioned tables in DEV server.
Now, i would like to move these tables to Production, since i can not create values to these tables in Production server.
How to move tables from DEV till PROD...??
NOTE: While updating these tables, system didnt prompt for saving under Transport Request Numbers in DEV server.
Regards
Pavan

Hi,
You can use scatt tool to upload the data in the developement server. Prepare a file with data. Do it in developement environment only. then in SCATT you have remote logon facility using which you can run the scatt in developement environment and the result will be placed in the production server.
Let me know if you what more information on this.
Pls reward points if helpful
rgds,
Harikrishna

QAAWS in not found in prod Qaaws after promoting from dev to prod

Similar Messages

Maybe you are looking for