QAdministrator not seeing other (computer) service node....

Cant figure out why Qmaster Service Browser is only showing the one computer of the two?
I am trying to make a cluster with two 8 core Mac Pro's connected by ethernet cable to help distribute the work load when I am compressing video.
I use both of them to compress video so I clicked "Services and cluster controller" for both.

Can't answer your question but will propose another way go about this.
Why not simply use unmanaged services on both machines? What this does is allow Qmaster to go out and find any machines available on the segment of the network automatically. All you have to do is submit the job with "use unmanaged services on other computers" checked and both machines should be engaged.
This works fine when you control both machines. Managed makes more sense when you want to control which machines are pulled into the render.
x

Similar Messages

TS2972 I have 4 Apple TV's. All set up to Home share. One will not see the computer. It is also the only 720 I have. The other three are 1080's. How do I get the 4th one (the720) to recognize my Mac?

I have 4 Apple TV's. All set up to Home share. One will not see the computer. It is also the only 720 I have. The other three are 1080's. How do I get the 4th one (the720) to recognize my Mac?

Need more information to help you, but I am providing some suggestions. Sorry if you are past these type of basic things. But didnt really have much to start with and understand your technical level to start with.
Have you got into Settings > Computers > Turned on Home Sharing (Note: You must use the some Apple ID used by the iTunes library on your MAC for them to see one another)
How is your MAC connected to the network vs the 720 ATV2? Is one WiFi and the other Ethernet? Have you tried switching the ATV2 to WiFi if Ethernet?
Has the MAC been restarted since this started happening? Same with your Router and any other networking device being used? Sometimes an IP conflict can arise in your networking and most consumer networking equipment does not know how to "self heal" without a reboot.
Make sure you have given those things a whirl and share back your results. Any other information you can provide, such as how you connect to your network from each ATV and MAC.

Firefox covers the whole screen so I can not see other programs opened at the bottom of screen

firefox covers the whole screen so I can not see other programs opened at the bottom of screen

It is possible that the screen is too high and that the status bar and scroll bar fall off at the bottom.
Open the system menu via Alt+Space and see if you can resize that window.<br />
If that works then close Firefox to save that setting.
See also:
* http://kb.mozillazine.org/Resizing_oversize_window
* http://kb.mozillazine.org/Corrupt_localstore.rdf

New computer does not see others on network

I have a home office network with 3 computers on a WRT110. One laptop is connected wirelessly. When installing a new laptop (which will replace one w/ a bad video) it connects immediately (when using hard wire connection) thru the router to the internet but does not see the other computers nor do they see it. I don't see any option to make a connection disk in the WRT110 manual or software.
Message Edited by JANATION on 01-12-2010 06:05 PM

Make sure File and Printer Sharing is Enabled...Also make sure both the computer's are in the same workgroup...
The default workgroup name in Windows Vista has been changed to WORKGROUP. In WindowsXP, the default workgroup name is MSHOME...
Also go into the computer software firewall on each computer, and set it to "trust" the other computers on your network.
If your firewall or PC security program keeps a list of trusted applications (also known as a "trusted zone"), then make sure that your router is in the trusted zone on your firewall...

Windows 7 does not see other computers in My Network Places

Hi all,
I have a weird issue with a behavior of Windows 7 machines. The setup is as following: domain with WinSrv 2008R2 DC-s, functional level of the domain is WinSrv2008R2, there are Windows XP and WIndows 7 machines on the network. Users use My Network places
to access shares on other people-s PC's. Everything was fine while we had WinSrv2003 domain controller. After it was upgraded to WinSrv2008R2, Windows 7 machined cannot see all of the computers in My network places. To make things even worse, there are no
rules - some Win 7 machines see others just fine, some see 30 PC's (out of 100), some see all after doing a refresh...all sorts of different situations. I have no idea where else to look. Can it be some DNS setting that I missing? Any help is much appreciated
Dino

Hi Dino,
As I known, by default computer browser service is not started in windows 2008 server and higher OS.
You should enable NetBios over TCP/IP on the NCI settings and start the browser service in the services.msc and it should show you all the list of computers connected on
network.
we should enable Network Discovery in the Network and Sharing Center first.
Please also temporarily turn off firewall on each machine.
In addition, please modify relevant settings on Windows 7 machine.
a. Click Start and open Control Panel.
b. Open "Network and Sharing Center" and click "Advanced sharing settings".
c. Expand the current network profile (such as "Home or Work"), and then select the following options:
"Turn on Network Discovery",
"Turn on file and printer sharing",
"Turn on sharing so anyone with network access can read and write files in the Public folders",
"Turn off password protected sharing"
If the issue persists, try to access another computer by entering
\\computername in the Start Search box. Let us know if it works properly.
For a test, you may also disable IPv6 in adapter properties.
a. Click the Start Button, type "devmgmt.msc" (without quotation marks) in the Start Search box and press Enter.
b. Double click to expand "Network Adaptors".
c. Right click your network card and click Properties.
d. Click Advance tab. High light Speed & Duplex
e. If you would like to use the full functionality, please set the Value to the highest Full.
f. Click OK.
Hope it helps.
Regards,
Blair Deng
Blair Deng
TechNet Community Support

TM AIRPORT NETWORK NOT 'SEEING' WINDOWS7 COMPUTER IN SHARED IN FINDER?

I have a TM Airport network with an iMac and MacBook Air all working fine. Would like to have Windows7 computer show in SHARED section of Finder. Windows computer is able to use WiFi Airport connection to get online. But does not showing as SHARED.
What WINDOWS and MAC settings are needed to see Windows computer in SHARED?
Thanks

First, can other Windows PCs access the share that you created on this PC? ... or is it just your Mac that cannot?
If it's just the Mac, then please try adding the Windows's Workgroup name that you are using in the Mac's System Preferences > Network > WINS tab. Be sure to enter it exactly as it is defined for the PCs. For example, if the Workgroup name is: WORKGROUP, enter it that way on the Mac.
The NetBIOS Name field should already be pre-populated with your Mac's Computer Name.
The WINS Servers field would only be required if you are running a WINS server.

Nexus 1010 VSM does not see VEM (DPA service not running....)

Hi all,
I have the attached topology. All the conf outputs and device details are attached. The problem is "vemcmd show card info" output shows that VEM correctly receives the control, packet VLAN information from the VSM. However I couldnt make vempda service to run. I got the same output all the sayins that : "VEM Agent (vemdpa) is not running". I checked the control and packet vlan end to end connectivity by creating VMs and etc. there werent any problems....One thing is that, VEM AIPC MAC never showed up in the upstream switch which is connected to ESX host.
I would be glad if someone can help me out with any configuration errors or anything like that...
[root@sahaesx1 ~]# vem status -v
Package vssnet-esx5.5.0-00000-release
Version 4.0.4.1.3.0.0-2.0.21
Build 21
Date Sat May 22 16:25:36 PDT 2010
Number of PassThru NICs are 0
VEM modules are loaded
Switch Name      Num Ports   Used Ports Configured Ports MTU     Uplinks
vSwitch0         128         4           128               1500    vmnic0
DVS Name         Num Ports   Used Ports Configured Ports MTU     Uplinks
vsm1yeni         256         51          256               1500    vmnic2,vmnic1
Number of PassThru NICs are 0
VEM Agent (vemdpa) is not running
[root@sahaesx1 ~]# vemcmd show version
VEM Version: 4.0.4.1.3.0.0-2.0.21
VSM Version: 4.0(4)SV1(3)
System Version: VMware ESX 4.1.0 Releasebuild-235786
[root@sahaesx1 ~]#

Ok. Now VEM and VSM speaks to each other. However I can not see VEM on "show module vem mapping" ? Is there any specific reason to that ?
[root@iacm-1 tmp]# vem-health check 00:02:3d:70:01:03
VSM Control MAC address: 00:02:3d:70:01:03
Control VLAN: 444
DPA MAC: 00:02:3d:40:02:00
The VEM-VSM connectivity seems to be fine.
vsm1yeni# show module uptime
------ Module 1 -----
Module Start Time:   Thu Oct 14 16:49:45 2010
Up Time:             3 day(s), 23 hour(s), 45 minute(s), 6 second(s)
vsm1yeni# show module vem mapping
Mod     Status          UUID                                    License Status
vsm1yeni# show module vem counters
Mod InNR OutMI InMI OutHBeats InHBeats InAipcMsgs OutTO OutTOC InsCnt RemCnt
vsm1yeni#

Compressor 3 not seeing "This Computer"

we've just upgraded to FCS 2 and are having a few problems with Compressor 3. On one computer it is not recognising itself as "This Computer", only when we create a cluster with this computer as the only one will it be recognised. Also compressor does not see the Network Render folder on the xsan volume, only when we locate this in the users document folder will it see it. Seems like a network issue though everything worked fine with the Compressor 2. Any thoughts anyone??
Cheers
Dual 2 Ghz Power PC g5 Mac OS X (10.4.9) Xsan Filesystem 1.4

The only way it worked to me was to reinstall OSX and FCS2. I've lost a week trying to make it work, reinstalling FCS2 several time, no chance.
Qmaster only, noway "This Computer" were always there.
The problem i think is related to some system prefs but i couldn't find a way out other than reinstall all new fresh, tedious but at least it works and is somewhat faster than ever.
eri

Mid 2010 Macbook Pro does not see other devices in airdrop

Hi,
I am able to turn on airdrop. There are no restrictions preventing me seeing other devices or them seeing me. I am unable to connect with my iPhone 5 or IPad air 2 in airdrop. Any suggestions to resolve this issue?
Thanks,
Andy

There are none. A pre-2012 Mac will not see iOS devices in AirDrop.
(119470)

I bought 2 mac book pros and have time capsule connected to router. Both computers can see time capsule but i can not see other computers.

I bought 2 mac book pros. At home i already had a network with a timecapsule connected to a router and a windows xp lap top connected to it. When i turned both macs on i was able to see the time capsule and the windows xp computer HOWEVER neither mac could see each other......any help would be appreciated.
Nick

Thanks Linc ......you were right on the money. Your help has been awsome. I spent 3 hours last night doing stuff with out any solutions. May I ask you another question if you have the time and patience please. My orriginal setup was 2 windows laptops with XP on them connected with a timecapsule attached to a router. Hence the time capsule made a wireless signal aswell as being an external hard drive. On one of the laptops i have a printer attached to it which was shared so that the other computer could print documents through the network however the computer attached to the printer has to be on. Do you know what i have to do so these new 2 mac book pros can print to that printer? Thanks again for all your previous help. Nick

I am trying to understand the licensing procedures for using tabKiller for 3.5.7 firefox. Who should I contact for this? I do not see any customer service phone number for Firefox

I am trying to understand the licensing procedures for using tabKiller for 3.5.7 firefox. Who should I contact for this? I do not have the customer service phone number for Firefox

Tab Killer is not created by Mozilla, it is created by a private individual who has made it available at no cost for other people to use.

Not seeing other devices' browser content

on my iPad, I am not seeing the open tabs on my chrome browser on the iPhone, under Other Devices. This seems to happen a lot on all my devices.

See on other devices uses iCloud. I don't think Chrome syncs with iCloud.

IBook G4 and Airport - does not see other Macs on network

Hi. My iBook G4 (1 gHz, 768 meg, OS 10.4.10) has a networking issue. I can easily connnect online via the Airport card to our Belkin 54g router, to which my G4/733 and G5/2gHz are also connected (hard-wired). As I said, I can connect to the internet with no problem...but cannot see the other computers, nor print to a shared printer! And they cannot see the iBook! when I turn off Airport, and hook up the iBook with a wire, everything works fine, and everyone can see everyone else. This points to some sort of Airport setup thing...any suggestions?

I don't have tiger, so I don't know how different it is from panther;
so have you turned on the correct sharing in your sys preferences,
have you created a computer to computer network (using airport),
have you tried to connect using the network or _connect to server menu_ choice to one of the other computer that you have a user name and password for?
It seems to take a minute or two for the other computer(s) to show up in the network window, so maybe you just aren't waiting long enough? or maybe it's a tiger difference.
I just checked to see if I could connect myself to another computer here, using airport and a belkin 54g router. both computers are wireless G4 ibooks and I created a network, named it, and selected it from the drop down menu choice on both computers and I can access either one from the other, but I have to have a login name and password to do so. those have to be the same as one that is on the computer you are wanting to access.

Apple TV does not see other iTunes

My Apple TV and my iTunes get along great. A friend showed up with his iTunes (on an XP PC). My iTunes and his work fine together, we are both on 7.3.1. So I know network, sharing and connections all are fine. itunes is working as it should for both of us.
But the Apple TV does not see his iTunes to stream. It is supposed to be able to steam from 5 other iTunes, but my Apple TV only sees mine (the one it syncs with). Note that it can also stream from mine just fine.
Any ideas?

This may reflect my lack of understanding.
His iTunes does not see the Apple TV at all. It does not show up in his iTunes. There is no "devices" list and no Apple TV.
However, even if it did, if you register the Apple TV with another iTunes, doesn't that mean the Apple TV is now going to sync with that new iTunes? Don't you only want to register the Apple TV with one iTunes? I assumed it would stream with any iTunes on the network (up to five).
But we are not there yet. His iTunes does not see the TV and the TV does not see him.
I double checked, he is looking for Apple TV in his settings.

HT1549 I can not see other itunes libraries on itunes, bonjour is the problem, how to fix it

How can i re-instal Bonjour in i-tunes so i can see other music libraries in my network

Do you need Bonjour to wirelessly sync iPod?
https://discussions.apple.com/thread/3952590?start=0&tstart=0

QAdministrator not seeing other (computer) service node....

Similar Messages

Maybe you are looking for