QAM Channel Assignments Keep Changing

I have a line of my FIOS split off to a QAM TV tuner that's attached to my PC.  I'm using Windows Media Center to record QAM channels, and using the Media Center channel guide for the QAM channels.  However, it seems that Verizon keeps changing the channel assignments for the QAM channels.  It seems to involve the CBS assignment.
Last week the channel that was assigned to CBS changed to something else, and therefore the CBS shows that I had set to record were not recorded, recording instead whatever was on the reassigned channel.  So I ran the Windows Media Center TV setup again, to have it re-assign the QAM channels, and it seemed to work, displaying live CBS content on the channel suppsedly assigned to CBS.  However, this week it looks like they changed the assignment again, after I did that, and the channel actually recorded was Universal Sports instead of CBS.  So I had to go and re-run the TV setup to get the new channel assignments.
What gives, Verizon?

We are in the middle of deployment of our 1.9 interactive menu guide software for our set top boxes and apologize if changes needed to made are causing an inconvenience.
Anthony_VZ
**If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan

Similar Messages

  • Why does my wi-fi keep changing channels

    why does my wi-fi keep changing channels?

    the channel is chosen by the WiFi router. If you don't want changes for whatever reason, set it in the router as manual and set the channel you want.

  • Audio Channels in Timeline Keep Changing?

    I have some audio tracks, on those tracks I inserted a .wav file that has 4 channels.  I only need 2 channels. ( 1 and 2 )  I unlinked the audio and I am just using channels 1 and 2.
    Channel 2 on the timeline keeps defaulting to Channel 1 - I change it and then next time I open the p[roject the audio on channel 2 goes back to channel 1.
    I hope this makes sense.
    This picture is what it needs to be
    This picture below is what it changes to and I have to reset the channel.
    Below is info on the audio channel
    Im doing something wrong right?
    I hope not because I have already layed in and adjusted all my audio.
    Thanks for your help!

    Thanks for your help.  I haven't made a copy of the WAV.
    In the timeline, the 4 channels are linked together. Ch1 is a LAV Mic, Ch. 2 is a Seperate LAV mic, Ch. 4 is a boom mic and there is nothing on channel 3.
    So I unlinked the WAV file in the timeline and removed the audio channels that I did not need in the timeline.
    Then I moved the 2 LAV mics to Audio Channels 1 and 2 on the timeline.
    I think that is when I noticed that both Channels were the same... not sure - I have moved stuff around so many times.
    So in the timeline, I would "right mouse click" on the audio track in the timeline and modify the audio clip by clicking on audio channels.
    As a work around, I modified the LAV audio clips in the timeline to where they needed to be and did an audio mixdown of just my LAV mics.  Brought that file back into the timeline and muted the others that kept changing on me.
    Does that help?  Thanks again!

  • Time on server keeps changing

    Hi,
    I'm having a problem with one of my servers.
    It is a Xen-guest Windows 2008R2 STD running IIS.
    Timezone is UTC+1.
    It keeps changing time just a few minutes after it has sync the correct time with the NTP.
    As you can in the XML from the event log it changes two hours but the actual time is two hours ahead of the "OldTime" when the change happens.
    - <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
    - <System>
      <Provider Name="Microsoft-Windows-Kernel-General" Guid="{A68CA8B7-004F-D7B6-A698-07E2DE0F1F5D}" />
      <EventID>1</EventID>
      <Version>0</Version>
      <Level>4</Level>
      <Task>0</Task>
      <Opcode>0</Opcode>
      <Keywords>0x8000000000000010</Keywords>
      <TimeCreated SystemTime="2013-08-28T12:43:21.810110300Z" />
      <EventRecordID>62064</EventRecordID>
      <Correlation />
      <Execution ProcessID="832" ThreadID="4436" />
      <Channel>System</Channel>
      <Computer>GS4</Computer>
      <Security UserID="S-1-5-19" />
      </System>
    - <EventData>
      <Data Name="NewTime">2013-08-28T12:43:21.810110300Z</Data>
      <Data Name="OldTime">2013-08-28T14:42:57.015625000Z</Data>
      </EventData>
      </Event>

    Hi,
    Here is a good article about Hyper-V time synchronization, I hope it will help you:
    Hyper V Time Synchronization on a Windows Based Network
    http://kevingreeneitblog.blogspot.in/2011/01/hyper-v-time-synchronization-on-windows.html
    Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
    If these links we provided couldn’t fix your problem, please release another post on
    Windows Server Hyper-V Forum to get more professional support:
    Windows Server Hyper-V Forum
    http://social.technet.microsoft.com/Forums/en-US/home?forum=winserverhyperv&filter=alltypes&sort=lastpostdesc
    Best Regards,
    Amy Wang

  • Why does my speaker output balance keep changing?

    Hi,
    I've noticed that every now and again, the output balance for the speakers on my MacBook Pro (13-inch, retina display, early 2013) keeps changing randomly and shifting to the left channel.
    This is really frustrating since never change it manually, and often use my Mac to listen to music/watch films etc. Obviously it's not a big issue to change (done easily through System Preferences) but it would be good to know why it keeps changing in the first place!

    try this.http://support.apple.com/en-us/HT204063   http://support.apple.com/da-dk/HT3964

  • MSI VOX Audio default settings keep changing on startup

    I've had this VOX tuner for about a year and a half and I've used it on 2000, XP SP1, SP2, etc...and I've fought with it every single time I reconfigure the O/S.  I am a computer support professional - I know a couple of things about drivers, registry file, etc...and I STILL can't get this thing to work consistently!
    Anyway, when I install the drivers and MSIPVS software, it always selects the MIDI synth input instead of Line In as the default audio input setting.  I reconfigure MSIPVS and tell it to use Line In instead - everything works fine.  Then I exit and restart MSIPVS - it goes back to MIDI and I have to reconfigure the audio to use Line In every single time I run the software.  Of course, that means the recording doesn't work - because as soon as I click on record, it sets the audio default back to MIDI synth again.  I've used two different audio cards with this and they all do the same thing (SoundBlaster Live! value and a SoundBlaster Audigy 2).  I've used several different motherboards - I've completely replaced all components in my computer several times and I always have this same problem. 
    I've got an internal MSI TV tuner card on another machine running this same software - it has the same problem.  It won't exit half the time (the window closes but you can still hear the audio running until you restart the computer). 
    The hardware seems fine, but the software is unbearably poor!  I'd drop the software in a second if I could find something else that works better. 
    The weird thing is that in uninstalling, reinstalling, cleaning out the registry, fiddling endlessly -once in a while I can actually get it to work, but I have no idea what I've done to make this work twice in a row.  I've reinstalled the software dozens of times now, reinstalled Windows...I don't know what else to try. 
    Obviously, I've upgraded all audio and video drivers - none of that makes any difference.
    If I open the SoundBlaster mixer program, as I start the MSIPVS program, I can see the MIDI and Line In channels get muted and un-muted but by the time the software loads, it's defaulted back to MIDI Synth again.
    Anybody have ANY ideas?  I'm desperate to try anythig now.  I'm considering throwing the whole thing out and getting an ATI tuner or something completely different - as long as it doesn't use this Intervideo software...
    Thanks.
    Oh yeah...one more thing I've noticed is that the WinCinema Manager causes all kinds of problems - if this program is running, the channel keeps changing to 1, 11, or 111 - it seems to be sending some kind of remote control signals to change the channels so I've had to disable this program - then the channels seem to work fine (but maybe it's causing my audio problems...?)

    Hi and welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
    Also check Smart Connect if you have any event enabled that can change settings. 
    When it comes to the keyboard, in some cases, the keyboard can be changed back to the default keyboard when you update the selected keyboard app from Google Play. 
    What are your thoughts about this forum? Let us know by doing this short survey.

  • Status keeps changing from invisible to online: why the issue is ignored?

    There is a serious issue raised in the parallel thread, which is critical for many people: "Status keeps changing from invisible to online" (initiated on ‎16-11-2014 by b.agne, Mac section). In short, when starting using a device, the Skype status changing from "invisible" to "online" - sometimes just for a moment, though enough for others to notice you. These affects very much any type of devices. I am sure the issue has already led to multiple personal crisises and potentially financial losses due to buseness partnership issues (I came close to that myself, and now use anything but Skype for business). The question is: WHY the issue is completely ignored by Skype, Microsoft and expert comunity? Please post the solution if anybody knows how to fix the issue, or suggest how to make Microsoft to know that it should be fixed. Kind regard...

    Hi, I also have the same issue. I change the status to Invisible and a later on it is already as "Online", without having even touched/opened Skype. The only way that I see this may happen is that I have the app installed on the smartphone, but before it never had this issue, but from some month ago it started. Any correction or suggestion to work around this issue? Regards

  • HT1911 I just verified my Apple user ID and password but certain updates won't download (gives me the signal that I'm incorrect).  I keep changing it, verifying but not all applications let me proceed.

    I just verified my Apple user ID and password but certain updates won't download (gives me the signal that I'm incorrect).  I keep changing it, verifying but not all applications let me proceed.  So I can't download itunes software updates or update my iphone even though I have just verified my info.  I know others that have this problem but can't get support to resolve it.

    Hi mpellichero,
    Thanks for visiting Apple Support Communities.
    The steps in this article can help if you are being asked for the password to your previous Apple ID:
    iOS 7: If you're asked for the password to your previous Apple ID when signing out of iCloud
    http://support.apple.com/kb/TS5223
    Best Regards,
    Jeremy

  • Having a problem with iTunes and internet radio. The programme keeps changing stations

    I'm abroad at present and using a wireless connection at the lab. Itunes keeps changing internet radio stations as a function of time,
    Any suggestions or os it a known problem with the current version?
    Don

    Try the following user tip:
    "Invalid drive X:\" install errors

  • I have a mac pro, an ipad2 and now an ipod touch. Problem is my apple ID password is not recognized, and I cannot download or purchase applications. I have had to keep changing my password than it doesn't accept the new one either??? It says it's a year o

    I just bought an ipod touch and am trying to make an application purchase on it and to use icloud to transfer to my ipad or laptop.
    I cannot sign in.  the password is never accepted. How do I get into applications to purchase or download some of what I have on my ipad?
    This sign in on the ipod touch has the address computerservice1614.com  I don't even know what that is.  I signed in with my apple ID but had to keep changing the password because the ipod won't accept any of them.  I am feeling so frustrated and wishing I didn't buy the ipod.  Anyone know how to deal with this.  I am so tired of trying. This is my second day of trying.

    I would restore the iPod to factory defaults/new iPod on your computer and start over. It appears the iPod is associated with another account.  Any media that came with the iPod does not belong to you and di not transfer with the iPod hardware.

  • My display keeps changing to 800x600 after upgrade to 10.8.3

    After upgrading to 10.8.3 my display keeps changing to 800x600 after it wakes up from sleep. I have to go to preferences and set again, and it works. It is quite annoying. Any clue.

    Not much to go on.
    What monitor and connection method are you using with the mac Mini..?
    Have you tried resetting the > NVRAM and PRAM
    1. Shut down the computer.
    2. Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    3. Turn on the computer.
    4. Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    5. Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    6. Release the keys.

  • How do i stop my itunes from changing the location of my itunes media.  i have it saved on a external HD and it keeps changing back to my local drive with out being told

    how do i stop my itunes from changing the location of my itunes media.  i have it saved on a external HD and it keeps changing back to my local drive with out being told

    No, an external drive will not always be mounted. If the drive goes to sleep, it can unmount, or it may unmount for other reasons. As Chris said, confim that the drive is mounted and active before launching iTunes.
    Regards.

  • Calendar colors keeping changing to purple

    one specific calendar keeps changing by itself to purple. even when i change it back to the color i want, it goes directly back to purple. this happens on my ipad and when accessing icloud on my mac book

    It seems that my green work calendar is now purple as well.
    In the past work was a light green and personal was a slightly different shade of green.  Now it is purple, not my favorite color but it is distinct.  It would be nice to pick you own colors
    I am an ical user,  rarely do I sign in using icloud via the net however this is how all my devices are linked
    This happened a while back and then reverted, if Apple would just have some notices of this at least we would know there is nothing wrong.  I am getting concerned that my data is not safe !
    iMac mid 2011
    Mac Book Pro 17 2012
    Mac Book Pro 15 2012
    iphone 4s
    Ipad mini
    3 apple tvs
    1 aiport extreme
    3 airport express's 

  • HT2513 my iCal calendar that I created with the color green keeps changing to purple.  no matter how many times I change it to green, it turns it back to purple.  Of course this only happens with iCloud and not "from my Mac".  Any ideas?

    my iCal calendar that I created with the color green keeps changing to purple.  no matter how many times I change it to green, it turns it back to purple.  Of course this only happens with iCloud and not "from my Mac".  Any ideas on how to correct this?  This seems like a trivial error, but it's super annoying.

    I called Apple and they said that they know about this problem.  It's a problem with iCloud which their Engineers know about.  (there was a new iCloud release, hence...)  No ETA for a fix yet.  I asked that this be escalated so Engineering doesn't put it at the bottom of their fix list.  I talked to a Senior Advisor and mentioned to them to have QA check their regression tests as this has happened before to me (the problem just didn't take this long to resolve).  I like to use green too for important stuff, so I've resorted to creating a new calendar using the normal calendar green for events going forward.  They could have picked another color besides green to have this problem with and I wouldn't have been so upset.  ;-)

  • Why does the color on my calendar keeps changing colors on its own

    I have several color coded calendars for each family members.  My daugther's calendar all of a sudden changed from green to blue (which is my son's) by itself.  I changed it back to green and it automatically changed back to blue again.   This happened once before a while back and after I keep changing back the color, it corrected itself eventually.
    Why is this happening and how can I fix it permanently?
    Thank you in advance for your help!

    Same problem on top of regularly dropping WIFI when all of my other devices have no problem.
    Owned this laptop since FEB 2014. My worst experience with a laptop to date. Wish I'd bought ASUS now which I also considered before buying.Another family member bought ASUS & no issues.

Maybe you are looking for