QAS and Virtual server advice

Hi all,
I am after a little advice I will soon be implementing a QAS system for both our ERP and BI system landscapes, our current setup is that our system landscape has no virtualisation in place, I was wondering if anyone would recommend either having a virtual servers for both QAS ERP and QAS BI or to have a single server with QAS ERP and BI the server will be conneceted to a SAN therefore disk space is not a problem, if I go down the virtualisation route it will be using VMWare and other servers such as WWI, Common store plus more will be inluded, I am looking more towards keeping the QAS system away from virtualisation but need to be sure its the right decision before I recommend this to my boss.
Any comments will be much appreciated.
Thanks
J

Hi,
Please be more prescribe while posting queries. As I understand to ur statements
If there is no QAS virtual system in ur landscape no probs
Just include the QAS original system into the network and go to Domain controller and create a this new system in
STMS/OVERVIEW/SYSTEMS
SYSTEMS/NEW VIRTUALSYSTEM
once creating the system with QAS id
Go to the newly included system i.e. QAS. Navigate to STMS and chk whether the QAS system is appearing in systems area if not
Go back to domain system and go to stms u will get a popup window and here select the INCLUDE Icon button and chk.
Prashanth.

Similar Messages

Home Virtual Server Advice?

So I am configuring a home virtual server and need a bit of advice. To start off, this is what I have:CPU: I5-4690KMB: ASROCK H97M PRO (has onboard Intel NIC)PCI NIC: Intel Pro/1000 PT Dual PortRAM: 24GB (Non ECC)SSD: Kingston SSDNow 120GB (v300)HDD: 1 x 1TB WD Black; 2 x 2TB Seagate NAS HDOther: Plan to run the host from a USB instead of installing it on the storage above.Purpose: I currently have 4 servers managing different aspects of my home network (firewall, file and media server, backup server, and misc server for "projects") and I am trying to simplify my setup and reduce operating costs. Not really "needing" a Homelab, just something that is stable, reliable, and easy"ish" to manage.My capabilities: IT professional with over 15 years of experience, but I am more of a generalist than a subject matter expert.Questions:1. Which...
This topic first appeared in the Spiceworks Community

So I am configuring a home virtual server and need a bit of advice. To start off, this is what I have:CPU: I5-4690KMB: ASROCK H97M PRO (has onboard Intel NIC)PCI NIC: Intel Pro/1000 PT Dual PortRAM: 24GB (Non ECC)SSD: Kingston SSDNow 120GB (v300)HDD: 1 x 1TB WD Black; 2 x 2TB Seagate NAS HDOther: Plan to run the host from a USB instead of installing it on the storage above.Purpose: I currently have 4 servers managing different aspects of my home network (firewall, file and media server, backup server, and misc server for "projects") and I am trying to simplify my setup and reduce operating costs. Not really "needing" a Homelab, just something that is stable, reliable, and easy"ish" to manage.My capabilities: IT professional with over 15 years of experience, but I am more of a generalist than a subject matter expert.Questions:1. Which...
This topic first appeared in the Spiceworks Community

CF licenses and virtual server environments

How do I determine how many CF licenses I need in a virtual server environment? Is it determined by the main server or is it based on how many cpu's are allocated to each virtual server?

You need to carefully read the End User License Agreement (EULA) for the version of ColdFusion you are deploying. For CF 11, it can be found here: http://wwwimages.adobe.com/content/dam/Adobe/en/legal/licenses-terms/pdf/Adobe_ColdFusion- Multi-20140214_1311.pdf. You'll need to understand the definitions of CPUs found in sections 1.4, 1.14, and 1.21, then carefully read all of section 3.1.2 (virtual machine license).
The comments in this Adobe ColdFusion Blog post are relevant too, as there are several that discuss the EULA and virtual servers: Announcing the launch of ColdFusion 11 and ColdFusion Builder 3 — Adobe ColdFusion Blog
-Carl V.

Hyper V internal network no ping between real and virtual server

Hi
I have a 2012 server with a static 192.168.1.102 ip address and a 255.255.255.0 subnetmask. This server can be pinged by other servers.
On this server I have Hyper V installed, and configured a virtual
internal network switch.
In Hyper V, I installed a 2012 server, using the virtual internal network switch, with the static 192.168.1.111 ip address and 255.255.255.0 subnetmask. The virtual server can ping other virtual computers using the same virtual internal network switch.
However, the host server can't ping the virtual server and vice versa. What am I doing wrong? I there something else that needs to be configured?

Hi,
If you want to connected your guest vm and your host you must setting this vms to the same virtual switch and at the same subnet, the Hyper-V internal virtual switch can't connect the host directly.
More information:
Hyper-V: What are the uses for different types of virtual networks?
http://blogs.technet.com/b/jhoward/archive/2008/06/17/hyper-v-what-are-the-uses-for-different-types-of-virtual-networks.aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

How to Install Physical and Virtual Host

I am getting licensing issues after I installed Essentials 2012R2 on a physical machine and then used the same license to virtualize it. It's saying my physical machine needs to hold all the FSMO roles in which my virtual machine is hosting those roles.
I read that Microsoft allows you to use the Essentials license for the physical and virtual server. Is that correct?
Is there a specific service I need to remove on the physical machine in order for these errors to stop? I still have the Windows Server Essentials Experience service installed. Is that what needs to be removed?
Thanks,
Doug

Hi Doug,
There is an article that provide details of licensing for Windows Server 2012 R2 Essentials. Please refer to and check if can help us to understand licensing for Windows Server 2012 R2 Essentials better.
Understanding Licensing for Windows Server 2012 R2 Essentials and the Windows
Server Essentials Experience role
Please also refer to following article and check if can help you.
Customize Deployment - Windows Server Essentials
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Error while creating virtual server in sunone web server 6.1

I created virtual server class called vs1 and virtual server called vsr1 under it. I deleted them . now while i am trying to create another virtual server class by setting lisener socket and giving it a name. when i create virtual server class and click ok and then apply to apply changes it gives me error with message:
File System error: can not open file for reading
c:/iPlanet/Servers/myservername/[email protected]
What's the solution ?
Thanks in Advance,

Hi..
Thanks for your reply...
Executed following command in OVS server..Please find the output of that command..
[root@IRIMSOVM utils]# ./do_rpc.py https://oracle:[email protected]:8899 echo hello
echo ['hello'] =>
success:echo=hello
[root@IRIMSOVM utils]#
Thanks...
YJR

Why do we have separate selectors for "from" and "smtp server" these days?

A while back we shifted our email from our own domain and virtual server to gmail. As was the case using our own domain, we still have two seperate "from" names in a selector above the body of an email being composed, but now the selector for the SMTP server has two possibilities, both "smtp.gmail.com" but one ending with ":[email protected]" and the other ":[email protected]". So now we have the possibility of sending emails with the email addresses "crossed" between the two selections. Since both accounts use "smtp.gmail.com", is there a way to reconfigure the Apple Mail accounts so that there's only the "from" selector and not two entries in the server selector?

Open up Mail's preferences. Under the Accounts tab, highlight one of the accounts. Each account should have their own SMTP server with the correct user I'd and password. If not, create one for each by editing the SM TP list. With the correct server shown in the list for the account highlighted, check the box to use only that server for that account. Repeat for the other account. You will still have 2 accounts in the server list, but it will automatically send from the correct server unless you have problems. If so, you will be given the option to use the other.
Under the composing tab, select the appropriate account to send new messages from. You will probably want it set to send from the selected account.
There is another way with gmail. You can go into gmail's settings. In settings for one account, you can add the other address to it for sending messages and set it to show the correct account it is sent from. I haven't had a gmail account in years, so you will have to explore that option for yourself if you wish to use it. Then you can use the same server for both accounts.
You can also go in to settings for the second account and add the other to it. That way it will always show the correct address no matter which server an account uses.

Need to create a virtual server and give its access to another admin

Dear Sir,
I am a new admin and have 5 Blade server "HP ProLiant BL660c Gen8".
I access these servers through HP enclosure.
I have to install Hyper-V on server 1 which consisted of the OS windows server 2012 R2 Datacenter edition.
I created a plan to create 5 Hyper-V VM's on the physical server and I requested the IT department network Admin that I want these 5 VM's to able to connect to each other.
The network Admin created a Trunking configuration on the physical server and after this setup he provided me Hyper-v node IP address and 5 more IP addresses for the 5 Hyper-v VM's.
Now it was left to me to Add the Hyper-v role and create 5 VM's.
While Adding the Hyper-V role, I was asked in the middle of the setup to add the network adapter for
connecting to external network.
I went inside the network connection settings and I see one network adapter "Microsoft Multiplexer"
which had the IP address of the Hyper-V node which was given to be me by Network Admin.
Besides this I found following Network Adapter: (Mgmt,Trunk):(Mgmt A, Trunk A);(Mgmt B, Trunk B) =Total
6 Network Adapter out of which only "Mgmt" was configured with the IP address of the Hyper-v node given by my Network Admin. Remaining all other Network adapters IPV4 configuration
was unchecked except "Mgmt"
So I selected the "Mgmt" connection while Installing the Hyper-v role
SO I chose this Network connection for adding the Hyper-V role.
My question: Did I chose the correct Network Adapter.
After doing this I created a VM-1 and tried to assign the IP address given by the Network Admin. But the network Admin did not provide me the default gateway so I used the deafult gateway according to the IP address and used the last digit as "1"
like a general installation.
Now my question is: 1.How can I use this VM to be used as a Virtual server?
2. I would like to open this VM through my browser by entering the IP address of this VM-1. How can I do this?
Because I access my physical server through the IP address. SO in the similar way I want to access this VM-1 through the IP address
OR is there any alternate way to access this VM-1 separately.
My Requirement: I need to give VM-1 access to another admin to Install his application on it. SO how to give him to access this VM directly?
This is my main query.
Waiting for your reply.
Thanks & Regards,
Ahmed

Jawin, Jacob, etc.. are fine for creating COM clients but COM servers is a totally different story. I suspect you'll either have to write your own JNI or get out your C/C++ compiler.

Exchange Server 2010 - DAG - Physical and Virtual

Hi All,
we are trying to configure Exchange Server 2010 SP1 DAG with TWO Servers, we are getting the error sector size on log file header was mismatch
1) Physical Server - when we check the sector size on log file - 512 bytes   (RAID5)
2) Virtual Server - when we check the sector size on log file - 4096 bytes
is there any workaround to solve this issue or do i need to re-install the physical server with 4096 sector size..
When i check the Volume details on both machine
1)
Bytes Per Sector :               512
Bytes Per Physical Sector :       <Not Supported>
Bytes Per Cluster :               4096
Bytes Per FileRecord Segment    : 1024
2)
Bytes Per Sector :               512
Bytes Per Physical Sector : 4096
Bytes Per Cluster :               4096
Bytes Per FileRecord Segment    : 1024
MCITP

Hi Jared,
I've got a question regarding your answer.
We have an existing Exchange 2010 DAG configuration with 3 mailbox servers in NL and 3 in the UK.
2 for normal databases at each site and 1 for Archive databases at each site.
The current Mailbox servers for the Archive databases are Hyper V 2008 R2 based VM's with a passthrough for storing the databases.
We now want add 1 new Mailbox server for storing archive databases at each site and add them to the DAG.
Can we use Windows 2012 Hyper-V hosts and create the new VM's with 4k sectorsize vhdx files for the new mailbox servers ?
Regards
Misha Verhoeven

Virtual server and client command

Hi,
I want to configure firewall load balancing as follows. I have 3 firewalls, FW1, FW2, FW3. I want to create a serverfarm for each FW, i.e. FW1 in SF1, FW2 in SF2, and FW3 in SF3. Then, we'd like to create two Virtual server VS1 and VS2. Each Virtual server has Server Farm SF2 as a backup server farm. I.e. SF1 is the active server farm for VS1, and SF2 is the backup server farm for VS1. We also have SF3 is the active server farm for VS2, and SF2 is the backup server farm for VS3. Note that all connections to VS1 and VS2 will come from the same VLAN (e.g. VLAN X). So the configuration of the virtual server I think should be as follows ;
vserver VS1
virtual 0.0.0.0 0.0.0.0 25
client 192.168.1.0 255.255.255.0
vserver VS2
virtual 0.0.0.0 0.0.0.0 25
client 192.168.2.0 255.255.255.0
So, the question I have is, will this work if we filter who can access the virtual server using the client commmand ? I.e. clients coming from 192.168.1.0 will be using VS1 and clients coming from 192.168.2.0 will be using VS2.
Thanks !

The 'client' command should work as you expect.
You'll need to add the 'serverfarm' command under each vserver. Ex:
serverfarm SF1
real 1.1.1.1
serverfarm SF2
real 2.2.2.2
serverfarm SF3
real 3.3.3.3
vserver VS1
virtual 0.0.0.0 0.0.0.0 tcp 25
serverfarm SF1 backup SF2
client 192.168.1.0 255.255.255.0
vserver VS2
virtual 0.0.0.0 0.0.0.0 tcp 25
serverfarm SF3 backup SF2
client 192.168.2.0 255.255.255.0
I am assuming that you will be using different IP addresses for each vserver. Is that correct?
~Zach

Create image server operating system with Hyper-V and virtual machines

Friends,
Need to replicate the environment they currently have, but wanted to optimize this operation by creating an image of windows server with Hyper-V and virtual servers already installed, what tool do I use? Can someone guide ???
Dreyher

I recommend you separate the task of protecting the host from the task of protecting the guest VMs.
By "replicate the environment", do you mean backup the VMs in a recoverable state? or do you intend on migrating the VMs to another environment like another physical location? How much down time can you tolerate if any?
To backup the VMs use a VSS based backup solution. There's plenty out there, including Windows Server backup, Altaro, DPM, Veeam, and many more. This does not require installing agent on any of the VMs, and will not down the VMs during backup. Here's an
example Powershell script to backup all VMs on the local host:
Install-WindowsFeature -Name Windows-Server-Backup
$BackupTarget = "\\server\share"
$WbTarget = New-WBBackupTarget -NetworkPath $BackupTarget
$WBPolicy = New-WBPolicy
Add-WBBackupTarget -Policy $WBPolicy -Target $WbTarget
Add-WBVirtualMachine -Policy $WBPolicy -VirtualMachine (Get-WBVirtualMachine) # Add all VMs on localhost
Start-WBBackup -Policy $WBPolicy -Async
If the intent is VM migration from one location to another, there are plenty of tools to do so with minimal or no down time. Just bing it..
Sam Boutros, Senior Consultant, Software Logic, KOP, PA http://superwidgets.wordpress.com (Please take a moment to Vote as Helpful and/or Mark as Answer, where applicable) _________________________________________________________________________________
Powershell: Learn it before it's an emergency http://technet.microsoft.com/en-us/scriptcenter/powershell.aspx http://technet.microsoft.com/en-us/scriptcenter/dd793612.aspx

Installing Mobile Repository Server DEV and QAS on same server

Hi,
i installed CRM Server 7.0 SR1 ABAP DEV and QAS on one server. Afterwards i installed the Communication Station DEV and QAS together on one server.
Now i want to install the Mobile Repository Server (MRS) for DEV and QAS on one server. For DEV i have installed it successfully. But i don't know how to install it for QAS on the same server.
The only answer i found is: Re: CRM Mobile installation
Here is written that one of the repository database ARS_DB needs to be renamed.
But my first question is:
Do i have to install the MS SQL Server 2005 again for the QAS system? Only a default instance is supported and not a named instance. Can i install a default instance twice?
What are the steps for installing the second MRS? Does anybody did it successfully?
It would be very nice if someone could help me.
I use SAP CRM Mobile 7.0 SP04 on Windows 2003 with MS SQL Server 2005 SP2.
Kind regards
Wolfgang

Hello
MRS requires SQL Server 2005. It is not possible to \have two MAR repositories with two default instances in a single machine.
Installation might not allow you or throw an error if you have more han one sql server defualt instance.
Instead, you can stll follow the either of the following approaches:
1. Use DEV MAR repositroy itself as a TST repository. It means, you will have one MAR for both DEV and TEST.You have to be cautious.
2. * First install the DEV MAR in one machine.
Configure DEV MAR to DEV CRM for transports.
Restore the TEST MAR DB in DEV MAR machine.
Also configure TEST MAR to TEST CRM server for Transports.
Approach 2 avoids the second time installation. You should have the TEST MAR repository to restore. this option woudl work:)
Best Regards
Shankar

Can I use the search engine and run a web application under the same iPlanet 6.0 virtual server?

I've got an iPlanet 6.0 SP2 virtual server with the search engine enabled, which was tested and working. I then deployed a web application to it (mapped to "/"), and the web application works fine but now the search functionality is completely broken. Browsing to /search results in a directory index being displayed. Is there some trick to getting the two working together? I tried shuffling NameTrans directives around, but can only get either the search or the web app working, not both.

Ok, I'm going to answer my own question now...
The issue has been resolved after some additional experimentation on my part. There were two causes for my problem:
1. The NameTrans directives in obj.conf are in the wrong order when Java and Search are enabled from the administration interface.
Here's the admin server generated obj.conf I started with initially, when the web application was working, but requests to the URI "/search" returning a 404 error:
<Object name="default">
NameTrans fn="NSServletNameTrans" name="servlet"
NameTrans fn="pfx2dir" from="/search-ui" dir="/usr/local/iWS-6.0/plugins/search/ui" name="es-internal"
NameTrans fn="pfx2dir" from="/mc-icons" dir="/usr/local/iWS-6.0/ns-icons" name="es-internal"
NameTrans fn="pfx2dir" from="/manual" dir="/usr/local/iWS-6.0/manual/https" name="es-internal"
NameTrans fn="es-search-nametrans" from="/search"
NameTrans fn="NSServletNameTrans" name="servlet"
NameTrans fn="document-root" root="$docroot"
</Object>
Here's my obj.conf now, which works perfectly:
<Object name="default">
NameTrans fn="pfx2dir" from="/search-ui" dir="/usr/local/iWS-6.0/plugins/search/ui" name="es-internal"
NameTrans fn="pfx2dir" from="/mc-icons" dir="/usr/local/iWS-6.0/ns-icons" name="es-internal"
NameTrans fn="pfx2dir" from="/manual" dir="/usr/local/iWS-6.0/manual/https" name="es-internal"
NameTrans fn="es-search-nametrans" from="/search"
NameTrans fn="NSServletNameTrans" name="servlet"
NameTrans fn="document-root" root="$docroot"
</Object>
The "servlet" NameTrans directive needs to go below all others which map a URI to a function or directory (but before "document-root"), or they break. This is consistent with the iPlanet documentation on NameTrans, but the admin server doesn't get it right!
2. The developer who wrote the web application uploaded a directory named "search" in the root of his application, which caused the server to display a directory index of "/search", instead of executing the search function. I believe this issue is covered in an iPlanet knowledge base article.

Virtual Server and Nat

Hello,
I have a question reguarding the the combination between Vserver and NAT. Maybe this is due to the order of the operation. I have a virtual server with the server farm. So the first think to do is Load Balancing (IOS SLB) toward the N°2 real server. Then just only for a kind of traffic (tcp port 23 or something else) I want to nat the ip address of one real to another (destination nat). Is this possible?
You can see tha attach for more detail.
Thanks
Ira

if you want to forward the traffic to another ip for a specific port, why don't you create a new serverfarm with the new real server ip address and then create a new vserver to handle this particular traffic
ie:
serverfarm regular
real x.x.x.x
ins
vserver regular
vip x.x.x.x /0 any
serverfarm regular
inservice
Then ADD
serverfarm special
real x.x.x.x <=== new real ip
inservice
vserver special
vip x.x.x.x /0 tcp 23
serverfarm special
inservice
This is the way to do it.
Regards,
Gilles.
Thanks for rating.

Need some advice with indexing and search server in multihomed environment.

Hi,
I want to introduce the JISS (java indexing and search server). We have an multihomed environment with two frontends for convergence and imap/pop proxy service and two mail stores in a cluster HA environment
(Sun cluster 3.2, messaging server 7u3-15.01, convergence 1.0-12.01 running on glassfish 2.1.1). The directory servers (multimaster) are on speperated servers.
I viewed the jiss deployment pages in the wiki (http://wikis.sun.com/display/CommSuite/Indexing+and+Search+Service+Deployment+Planning), but they are more confusing than helpful.
My questions are as follows:
Can I put the jiss web service on the convergence server (to share the same glassfish server?
Is it better to put the indexing part of JISS on a seperate server or on the convergence server or better on the mail store servers?
Can I run the JMQ broker in an HA environment on the cluster? Is it possible to run JMQ together with messaging server in the same cluster group?
Can JISS index two mail stores (I didn't find anything in the config guide)?
Best Regards,
Ruediger

ruediger_kunze wrote:
I want to introduce the JISS (java indexing and search server). We have an multihomed environment with two frontends for convergence and imap/pop proxy service and two mail stores in a cluster HA environmentI would recommend holding off until the next release (Communication Suite 7 update 1) as ISS update 1 provides a large number of useful enhancement.
I viewed the jiss deployment pages in the wiki (http://wikis.sun.com/display/CommSuite/Indexing+and+Search+Service+Deployment+Planning), but they are more confusing than helpful.
My questions are as follows:
Can I put the jiss web service on the convergence server (to share the same glassfish server?Yes. This is the scenario used in the single-host-install guide:
http://wikis.sun.com/display/CommSuite7/Sun+Java+Communications+Suite+7+on+a+Single+Host
Is it better to put the indexing part of JISS on a seperate server or on the convergence server or better on the mail store servers?This is answered in the Deployment Planning guide:
"Indexing requires significant CPU resources, thus, it is best to install the indexing service on a separate host dedicated to an ISS single server installation. If this is not an option, then install ISS on the back-end host as a single server installation, and install GlassFish Server as well for ISS."
Can I run the JMQ broker in an HA environment on the cluster? Is it possible to run JMQ together with messaging server in the same cluster group?This article may help:
http://wikis.sun.com/display/CommSuite/Deploying+GlassFish+Message+Queue+in+a+Highly+Available+Environment
Can JISS index two mail stores (I didn't find anything in the config guide)?When you Bootstrap the account you point at the mailhost that the account resides on:
http://wikis.sun.com/display/CommSuite/Administering+Indexing+and+Search+Service
"Creating New ISS Accounts"
Regards,
Shane.

QAS and Virtual server advice

Similar Messages

Maybe you are looking for