Qbittorrent won't start anymore because of boost (SOLVED)

After the last reboot, qbittorrent has decided not to start anymore.
$ qbittorrent
qbittorrent: error while loading shared libraries: libboost_system.so.1.48.0: cannot open shared object file: No such file or directory
Okay, so I saw that boost was at 1.49.0 (but has been installed for a couple of weeks now, and qbittorrent has resisted reboots since), and I tried downgrading it (both boost and boost-libs) to 1.48.0. (FWIW, qbittorrent is at the same version since december)
But now I get
$ qbittorrent
qbittorrent: error while loading shared libraries: libboost_system.so.1.49.0: cannot open shared object file: No such file or directory
How can I fix this? Thanks,
Last edited by bruno321 (2013-07-14 00:41:51)

This is happening to me again, but now rebuilding qbittorrent won't work!
I'm feeling a bit dumb: actually, packer doesn't rebuild packages when you reinstall. I didn't find the option to, either. But manually installing the aur package rebuilds it, and then it works.
Last edited by bruno321 (2013-07-14 00:41:41)

Similar Messages

  • Mega Player 538 won't start anymore

    I just flashed the firmware of my mega player 538 to the latest 1.11.03.
    The prosedure went ok but now the player won't start anymore.
    When I press "Power On" -button nothing happens.
    Is there anything that I can do or is the player gone...?
    Can I reset the player to solve the problem?

    I contacted MSI support, but no answer from them yet.
    Unfortunately I didn't have time to wait because I had a very important affair where I needed the device.
    So, I returned the player to the shop. Of course the shop didn't have replacement on the stock but they gave me my money back. So, I went to another shop and bought a creative player instead and I was able to complete my affair.
    It would have been nice to have the problem solved because the player was perfect for my needs and was very cheap as well (only 20 euros). The new player was three times more expensive and only 512Mb storage.
    If MSI will return with a solution I can post it here in case somebody else has a same kind of a problem.

  • X11 won't start anymore!

    Hello,
    this is a desperate call: I am at a conference with my MBP, (10.6.7, all updates done). I need Matlab for my presentation, which needs X11.
    X11 (and XQuartz) decided that they won't start anymore: the icon bounces in the dock for a while, then sits there without the little light underneath, and X11 is "non responding".
    The logs show something like this.
    I have googled and searched: similar problems once in a while appear but no posted solution.
    I tried:
    1) reinstalling XQuartz (I would reinstall X11, but how? I do not have the disks with me, I am away!)
    2) from an admin account
    3) create a new account.
    4) repair permissions.
    5) reinstall the font update from Apple that was recently issued.
    HELP PLEASE!!!
    11-05-16 5:02:01 PM     [0x0-0x44044].org.x.X11[20759]     X11.app: DISPLAY ("/tmp/launch-bHvQen/org.macosforge.xquartz:0") does not match our id ("org.x"), unsetting.
    11-05-16 5:02:01 PM     [0x0-0x44044].org.x.X11[20759]     X11.app: main(): argc=2
    11-05-16 5:02:01 PM     [0x0-0x44044].org.x.X11[20759]      argv[0] = /Applications/Utilities/X11.app/Contents/MacOS/X11.bin
    11-05-16 5:02:01 PM     [0x0-0x44044].org.x.X11[20759]      argv[1] = -psn_0_278596
    11-05-16 5:02:01 PM     [0x0-0x44044].org.x.X11[20759]     Waiting for startup parameters via Mach IPC.
    11-05-16 5:02:01 PM     [0x0-0x44044].org.x.X11[20759]     X11.app: Could not connect to server (DISPLAY is not set). Starting X server.
    11-05-16 5:02:01 PM     [0x0-0x44044].org.x.X11[20759]     X11.app: Launching /usr/X11/bin/startx:
    11-05-16 5:02:01 PM     [0x0-0x44044].org.x.X11[20759]      argv[0] = /bin/sh
    11-05-16 5:02:01 PM     [0x0-0x44044].org.x.X11[20759]      argv[1] = -c
    11-05-16 5:02:01 PM     [0x0-0x44044].org.x.X11[20759]      argv[2] = /usr/X11/bin/startx
    11-05-16 5:02:01 PM     [0x0-0x44044].org.x.X11[20759]     font_cache: Scanning user font directories to generate X11 font caches
    11-05-16 5:02:01 PM     [0x0-0x44044].org.x.X11[20759]     font_cache: Updating FC cache
    11-05-16 5:02:01 PM     org.x.privileged_startx[20781]     font_cache: Scanning system font directories to generate X11 font caches
    11-05-16 5:02:01 PM     defaults[20791]
    The domain/default pair of (org.x.X11, dpi) does not exist
    11-05-16 5:02:01 PM     [0x0-0x44044].org.x.X11[20759]     Couldn't create cookie
    11-05-16 5:02:02 PM     org.x.privileged_startx[20781]     font_cache: Updating FC cache
    11-05-16 5:02:04 PM     [0x0-0x44044].org.x.X11[20759]     font_cache: Done
    11-05-16 5:02:04 PM     org.x.privileged_startx[20781]     font_cache: Done

    Here is the solution: there was nothing wrong with x11 per se!
    The problem was that about 30 files in /usr/bin (like gzip, egrep, hexdump etc) had been hosed (they had 0 file size).  The puzzling messages was due to the fact that startx uses hexdump, which was simply silently doing nothing (since it had 0 size!).
    I do not know what or when these files were zeroed: I suspect a recent OSX update which did not complete and I had to forcefully reboot.
    I have fixed it enough to work (copying those files from another mac), but who knows what else lurks beneath the surface of apparent serenity!
    I am actually surprised that the whole system did not stop functioning completely.
    MORALE: if something looks strange in the logs with x11 or other apps, check the file sizes  in your /usr/bin, you may be surprised too!

  • Adobe bridge won't start anymore. Icon is hopping and then it shuts down..

    Could someone help me with this. After trying to install output module in bridge cc, bridge won't start anymore. The icon is hopping for a few seconds and then the appllication is shut down.

    Oh ok - Thankyou for that. I will be ringing them tomorrow and I will not be happy ! And I'm hoping they can suggest what I'm suppose to do about getting it back to them as I can't take it in myself. SO so angry!!! Does people getting it back in a worse state happen often? :| do read these discussion boards? I hope they do!!!

  • My 3Gs won't start anymore, how can I get it to?

    I plugged in my 3Gs for the night last week and I woke up with the battery at 80%, so I just thought that maybe it came unplugged or something.  I plugged in my charger and nothing happened, I got the "Charging is not supported with this accessory" error, even though I was using the white wire that came with it.  I took it out of the wall adapter and tried it on my computer, nothing.  I try my brothers wire, my mom's wire, car chargers, everything.  Now I'm not sure if my battery is just done, or if my phone just won't start anymore, it's out of warranty so I'm up for any type of fixes, thanks.

    Clean the iPhone dock port with a clean dry toothbrush. See if it helped. If not, clean dock port very carefully with lint free cloth moistened with Isopropyll Alcohol, especially clean the pins which are on top of the dock mid rib. You can even use the toothbrush with a bit of Isopropyll Alcohol here too. Let it dry, usually 30 seconds time. See if this helped.

  • Ultra 10 won't start anymore

    Hello,
    I have an Ultra 10 box with an extra video card inside. Everything was working fine, and then I got curious and decided to open it up to see what's inside. Now it won't start anymore. I turn the computer on, the fans start spinning, but nothing gets displayed on screen. I can hear the hard disk turning too, and the CD drive is powered, but I don't think anything is going on.
    The only thing I touched when I opened it was the extra graphics card, but I was very careful and I am pretty sure I did not fry it. I get nothing displayed on screen when I plug the monitor in the original video card either.
    Is there anything I can do to find out what the problem is? Is there some special switch inside the box that I may have turned off without noticing?
    Thanks for the help...

    Hello,
    when you removed the ATI Radeon (XVR-100) and powered-on, the long card (Creator3D or Elite3D) with the weird connector (13W3) became the default output device. It takes precedence over the integrated video.
    Remove the long card (if you don't own a 13W3-HD15 adapter or monitor with 13W3 connector) and insert the XVR-100 (attach the monitor to the integrated video). If you power-on the integrated video becomes the default. You should see the output on the monitor.
    Enter show-displays at the ok-prompt. If only a single entry is displayed, power-down and check if the card is properly seated.
    Otherwise press the letter of the entry that doesn't contain /pci@1f,0/pci@1,1/SUNW,m64B@2.
    This a sample output of an Ultra 10 with Creator3D as add-in board.
    ok show-displays
    a) /SUNW,ffb@1e,0
    b) /pci@1f,0/pci@1,1/SUNW,m64B@2
    q) NO SELECTION
    Enter Selection, q to quit: b
    /pci@1f,0/pci@1,1/SUNW,m64B@2 has been selected.
    Type ^Y ( Control-Y ) to insert it in the command line.
    e.g. ok nvalias mydev ^Y
    for creating devalias mydev for
    /pci@1f,0/pci@1,1/SUNW,m64B@2
    nvalias mydev ^Y
    The above sets the output-device to the integrated video even if a Creator3D is installed.
    Then enter setenv output-device mydev (if you used this name) and reset-all. Attach the monitor to the XVR-100.
    Michael

  • CVI program won't start anymore

    Our measurement application worked well on several PC's (Win7 32Bit, WinXp 32Bit).
    But on 2 newer PC's (Win7 32Bit) the application won't start anymore.
    The attached Error with the code R6030 shows up.
    We found a workaround for the problem: run the application as administrator.
    But after we installed a USB-driver, this workaround doesn't help anymore,
    and the Error shows up every time.
    We installed the environment (cvi-rt, etc...) with an distributed setup.
    So the Versions of the components are the same on every PC.
    Any ideas?
    Solved!
    Go to Solution.
    Attachments:
    Untitled2.png ‏25 KB

    Okay we solved the problem,
    the cause was, the HP-Software, which was preinstalled on the PC's (the others were Dells)
    After uninstalling the HP Security Suite our application works perfect.
    I hope this helps other poor guys

  • NSM3 service won't start anymore

    Hi,
    NSM AD 3.0.4 on W2008R2
    has been running fine for months, now engine service won't start anymore.
    engine.log from todays start:
    01 2012-12-13 11:19:19 7200 1 0001 1452 1480 ML: Failed to initialize 1
    or more components and/or subsystems. Engine is switching to
    stop-pending state.
    ideas?
    sk

    Sami,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://support.novell.com and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://forums.novell.com/faq.php
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://forums.novell.com/

  • Eclipse IDE won't start anymore after most recent security update

    Hello everybody,
    after today's security update the Eclipse IDE won't start anymore on my system, I just receive the following error message:
    A Java Runtime Environment (JRE) or Java Development Kit (JDK) must be available in order to run Eclipse.
    No Java virtual machine was found after searching the following locations: /Applications/eclipse/Eclipse.app/Contents/MacOS/jre/bin/
    java
    'java' in your current PATH
    Java is installed and Eclipse ran smoothly until I upgraded. Other Java programs like Visual Paradigm still work without problems.
    Does anybody have an idea what I can do about this? I have already tried repairing permissions, to no avail.
    Best regards,
    Björn
    Mac Pro   Mac OS X (10.4.9)  

    I have narrowed down the problem even more:
    Obviously system path variables are not set anymore on my system for UNIX processes that are started in background, whereas starting applications from terminal using the open command ('open Gimp.app' for instance) still works without any problems.
    Any ideas where to change this behaviour?

  • Facebook messenger won't start anymore.

    Facebook messenger won't start anymore on my iPad Air (iOS 8.1.3) after updating de Facebook App (v 23.0) on January 30. The blue circle keeps turning. What can I do?

    Hi jneelen,
    That is a bummer when the apps are not working. For most issues with apps that have been downloaded from the App Store, the troubleshooting article will work for most issues when they do not launch or crash on you. 
    If an app you installed unexpectedly quits, stops responding, or won’t open
    http://support.apple.com/en-us/HT201398
    Take it easy,
    -Norm G. 

  • Won't start properly because of too much stuff on desktop - how do I delete stuff if it won't start up now?

    I was trying to move photos to an external hard drive because my startup disk was full and I accidentally dropped them onto the desktop. Now my computer won't start properly because of all the stuff on the desktop and I don't know how I can fix that?

    Start up in safe mode. Hold the Shift key while your Mac is starting and check that you can start up in safe mode. Then, choose all the items you want to transfer in Desktop by pressing Command and A keys, and move them to the external drive.
    If you have any file in Desktop that you don't want to transfer, simply click it while pressing the Command key

  • Creeated new account - but safari won't start anymore

    I created a new account with a parental control. Logged in under the new account and Safari won't start anymore. It quits directly after starting. Any help suggestion ?
    Thanks much

    Does it work in your old account?
    If so, delete everything in the folder /Users/controlled account name/Library/InputManagers.
    Also try deleting /Users/controlled account name/Library/Preferences/com.apple.safari.plist.
    (replace controlled account name with the name of the controlled account)
    Good luck!

  • My ibook g4 won't start anymor from the harddisk. so I tried to reinstall the system from the orginial system cd. Doesn't work. It says the system cd is damaged. What should I do?

    my ibook g4 won't start anymor from the harddisk. so I tried to reinstall the system from the orginial system cd. Doesn't work. It says the system cd is damaged. What should I do?

    I would question that error message if the Mac OS X 10.5 DVD doesn't work, either.
    What error message(s) did you get with the Mac OS X 10.5 DVD? Is the Mac OS X 10.5 DVD the full retail install DVD, an upgrade DVD, or a DVD that came with another Mac?

  • Please help - iTunes won't start anymore: unknown error -69

    Hello out there,
    please can anybody help me: all of a sudden my iTunes won't start any more - it only shows a message stating an unknown error -69 and then quits.
    I did not change anything on my system before that, so I just don't know what could trigger that...
    I am using iTunes 7.0.2 on Windows XP SP2, both German versions.
    Before posting this question I searched the archives and tried the following, all to no avail:
    1. disabled "safe mode" in QuickTime audio options -> problem remains
    2. set speakers to "stereo headphones" in Windows sound options -> problem remains
    3. deinstalled iTunes, downloaded the installation file again and reinstalled it -> problem remains
    4. deinstalled iTunes and QuickTime, downloaded QuickTime stand-alone version, installed this and afterwards iTunes again -> problem remains
    5. deinstalled iTunes and QuickTime again, deleted all iTunes and QuickTime data folders, reinstalled everything again -> problem remains
    6. ran a CHKDSK an the drive iTunes is on -> no problems found
    It still won't start, always giving this unknown error -69.
    Please, does anybody know what to do?
    Any hints and help are much appreciated!
    Thanks a lot
    and best regards
    Frank
    PC   Windows XP  

    See if this helps: iTunes displays a -69 error when syncing iPod

  • Java application won't start anymore

    Hi,
    I am using a Java Application (Protege) that was running just fine last week but today it just won’t start!
    When click-on it jumps about 3 time in the dock and stop. I was able to run the connected .jar file but most of the features are not available this way.
    I have not done anything special since last week beside Safari update (1.3.2.).
    Any help is greatly appreciated.
    Regards,
    Adrien
    iBook G4 (1Ghz)   Mac OS X (10.3.9)  

    Did you update Quicktime to 7.0.4? See if the following discussion seems relevant. There's a solution in the fourth message (reverting to Quicktime 7.0.1).
    http://discussions.apple.com/thread.jspa?messageID=1500443
    If that's the fix, the problem may be due to Protege using an outdated JavaApplicationLauncher. See
    http://www.opensubscriber.com/message/[email protected]/3072264.html
    --Davipo
    iMac G5   Mac OS X (10.3.9)  

Maybe you are looking for