QC Adapter with SolMan - step by step guidance, if possible please

Hi experts,
I am embarking on linking QC tool with SolMan and request any help you can provide, including the following aspects -
(1) Sequence of steps from downloading the license from SAP - in brief
(2) Authorisation aspects
(3) Any SAP Notes that are must read before proceeding
(4) Any 'traps' to avoid or error messages to look out for
I have files from service.sap.com/solutionmanager and also from service.sap.com/rkt-solman
Your tips/inputs beyond these files will be valuable. If you would like to relate to those files, a clear guidance on sequence of reading/ executing them would be helpful too.
Thanks and regards,
Srini

Hello there!
The list of interfaces for archiving are located in transaction
SXMB_ADMIN -> Integration Engine -> Configuration -> "Define
Interfaces for Archivng and Retention Periods").
All interfaces which are not found in that list are flagged for
deletion by default.
Mor information in note: #872388 - Troubleshooting Archiving and Deletion in PI
Now, I'd like to give you a little explanation regarding the Archiving/Deleting procedures:
Checking out the report RXMB_SHOW_STATUS,
you can see the status of some messages, for example, if they're not in
status 000, 003 and 006, which means they're in final state, then it may
means that some messages were not ready to be processed by the default
job you configure.
There're three pre-requisites for deleting/archiving messages:
1- Age of message (older than the retention period)
2- Message status is final
3- Adapter status is final
Also, we have to consider the messages in report
RSXMB_SHOW_REORG_STATUS, that shows us the messages that are being
'considered' and those are being 'ignored'.
The first one takes all the three pre-requisites in account; the second
one takes only the first pre-requisite in account.
The status of the messages are take in account when the default job
you set up runs.
Hope it is complete to you
Best regards,
Caio Cagnani

Similar Messages

Commincation with the WFM Core system is not possible

Hi All,
Hi
I'm using Netweaver 2004s, ECC 6.0, cProjects 4.0.
When i go to communicate with WFM Core the Error occures:
commincation with the WFM Core system is not possible
Please provide me the solution
Thanks
Nitin sharma

Hi
Try activating some of the services in T code SICF:
Default host -> SAP -> bc -> bsp -> sap -> prp*
(Activate all prp related services)
Also check the RFC connections.
regards
krishna

Step by step procedure to connect SAP XI(Seerburger adapter) wi EDI partner

hi,
I need to know what kind of scenario we have go with seerburger adapter to connect with EDI partner?
give some example scenarios and step by step procedure to connect SAP XI(Seerburger adapter) with EDI partner?
regards
Ruban
Message was edited by:
ruban R

hi,
i found these weblogs,
/people/bla.suranyi/blog/2006/06/08/sap-xi-supports-edifact
/people/william.li/blog/2006/03/17/how-to-get-started-using-conversion-agent-from-itemfield
/people/paul.medaille/blog/2005/11/17/more-on-the-sap-conversion-agent-by-itemfield
other than any other weblog for this scenario for AS2 adapter for abap proxy to EDI partner to send purchase order ?

How To Configure Or Intialize Portal Installed With BI7.0 - Step By Step

Hello Gurus
How do I configure or start working on portals which is installed as part of BI 7.0 installation that is EP and EP Core(Includes BI-JAVA and ABAP Stacks).
Please help me out with possible guidance(if possible Step by Step procedure) how to set up the parameters and at which locations in BI.. I have kept couple of days exploring this site, but I couldnt fine one answer relating.
More over the answers I could find was "To configure technical content, business content and bi admin cockpit," Any help or suggestion provided is grealy appreciated and points will be awarded accrodingly.
Thanking you all gurus in advance,
Regards,
Parvez.

Dear,
Try these links:
http://help.sap.com/bp_epv170/EP_US/BBLibrary/Documentation/N00_BB_Essential_Information_EN_US.doc
http://help.sap.com/saphelp_nw04/helpdata/en/7f/5bfc3f8fc2c542e10000000a1550b0/content.htm
https://websmp102.sap-ag.de/~form/ehandler?_APP=00200682500000001337&_EVENT=DISPLAY&COURSE=TEP12&COLLECTION=43&LANGUAGE=EN
http://sapport.blogspot.com/2008/03/business-intelligence-java-components.html
/people/srinivas.gv/blog/2005/11/28/role-and-configuration-of-isolation-methods-in-sap-enterprise-portal
/people/julia.kielbasiewicz/blog/2005/04/17/integration-of-sap-business-warehouse-and-enterprise-portal-150-single-sign-on
http://help.sap.com/saphelp_nw04/helpdata/en/0f/163c405865e801e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/32/98e6418b7eca17e10000000a155106/frameset.htm
/thread/189547 [original link is broken]
note: You can as well search in this forum.Im sure there are lots!
Thanks.

Required step by step guidance to deploy ejb on AppServer

Hi Friends,
I've downloaded the "Sun Java System Application Server
Platform Edition" from sun site.
But i don't knw how to deploy it using this App server.
eg.
1)How to create a project and application (Go to Menu select New something like this) using this AppServer?
1)How to connect to database not in code for deployment using AppServer?
2)How two beans interact with each other and how i mapp thm to each other while deploying it ?
3)How the Entity beans mapped to corresponding Session bean?
4)How i used it(ejb) with web-tier , means the deployment with any servlet or jsp?
I want step by step guidance to deploy an application on AppServer .
Regards,
Sachin Warang.

You could start with the tutorial, Part 3: Enterprise Beans
http://java.sun.com/javaee/5/docs/tutorial/doc/

Step by step procedure to configure a BAAN adapter

Hi All,
Can anyone please provide me the step by step procedure to configure a BAAN adapter or Oracle Adapter or any Application adapter in the XI System?
Thanks,
Reddy.

Hi,
There is Iway Adapter to Integrate with a JD Edwards System,
Look into this series for the same,
/people/yomeshp.sharma/blog/2006/06/01/integrating-jdedwards-system-with-xi-using-iway-adapter-part--i - Part I
/people/yomeshp.sharma/blog/2006/06/01/integrating-jdedwards-system-with-xi-using-iway-adapter-part--ii - Pat II
/people/yomeshp.sharma/blog/2006/05/31/integrating-jdedwards-system-with-xi-using-iway-adapter-part--iii -- Part III
Regards
Bhavesh

Step by step complete setup for WRT54G ver.6 with Laptop and XBOX 360

Hello. I am sorry to post this, I am sure it is a juevenile and redundent question...but I have tried to look for the set up cd (I can find where to download it...though I can find the firmware upgrade or whatever). My friend at work said it would do all the setup pretty much automatically for me.
I somewhat know computers, but you might go ahead and make your replies VERY lamen's terms or I might not be able to follow. Anyways, what I need, is a step by step/screen by screen directions for a secure network. I have made a partial attempt at setting it up and it technically works, but I would feel better if I did the steps a-z in order, so I know that it is done correctly. I also am not totally confident in its security as it is now. (Also, technically, I did not check the XBOX again after getting the new laptop, I am just assuming it is still working because it was before).
My problem is I can't seem to find very good directions for setting up the router...I only find partials or confusing directions.
So here are the things I am trying to connect:
Liksys WRT54G ver. 6
Gateway Laptop running Windows Vista
XBOX 360 - WIRED
(I had a PC and a laptop, but they both died at the same time and I have only been able to replace the laptop at this point...the PC will come later and not sure at this point if it will be Wired or not).
I have a cable Modem between the Router and the wall...I didn't look at that for brand/etc...but I can get it ASAP if needed.
Here are the settings that I have so far:
Changed the Router Name
Changed the SSID
Have DHCP set to 3 (XBOX, PC, Laptop)
Wireless SSID Broadcast: Disable
Username and Password changed to my own info
UPnP: Enable
I may have changed other things without knowing it. So like I said, a complete, step by step screen by screen set up would be totally appreciated. I haven't done anything in the security tab, all that is totally foreign to me, so I am just not broadcasting for now until I can get some help setting things up with you guys.
And if someone is familiar with the Laptop/XBOX 360 setup, and I need to change any of the settings on the XBOX itself, could you please include that in your directions? I know that isn't technically what THIS forum is for, but it would sure be helpful to me if you happen to know both parts anyways.
Thanks a lot (in advance)!

So all you just need to do is, secure your Wireless Network. Follow the setps bellow and change the settings on your Router.
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave Username blank & in Password use admin in lower case...
For Wireless Settings, please do the following : -
Click on the Wireless tab
- Wireless Network mode should be mixed...
- Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...
- Set the Wireless channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on Save Settings...
Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
For Wireless Security : -
Click on the Sub tab under Wireless > Wireless Security...
Change the Wireless security mode to WPA, For Encryption, select TKIP...For Passphrase input your desired WPA Key. For example , MySecretKey , This will serve as your network key whenever you connect to your wireless network. Do NOT give this key to anyone and remember the key.
NOTE : Passphrase should be more that 8 characters...
Now see if you can locate your Wireless Network and attempt to connect...
Click on Advanced Wireless Settings
Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304, Change the RTS Threshold to 2304 >>Click on "Save Settings"...
Now see if you can locate your Wireless Network and attempt to connect...

Urgent help: How to remove the accumaltion when show movies step by step with buttons

I want to show the movie step by step by clicking the next
button. Inside each frame, many movie clips are generated
dynamically at runtime, and they can be played interactively.
I achieves the step-by-step display of those frames by adding
another layer with the action stop(). But I got one trouble: all
the movie clips from previous frames are accumalted. How to remove
the accumulation from previous frames?
For the continuous display of the movie, I tried to use
onEnterFrame() and change the _visible property of all the movie
clips to false in this function. But it doesn't work for the
step-by-step display. Once I click the next button, the movie clips
at the current frame just show very quickly, then disappear. What
should I do?
I need to fix this immediately.
Your help would be greatly appreciated.
- zcx

you can use the removeMovieClip() method for those movieclips
added dynamically.

How do I sync my new ipad mini with my old ipad 2, without losing any apps or data in notes? I need step by step instructions for first-time sync with ipad mini. Thanks.

How do I sync my new ipad mini with my old ipad 2, without losing any apps or data in notes? I need step by step instructions for first-time sync with ipad mini. Thanks.

If you synced it many times, you have to have a backup. It's just a question of how old that backup is now. When did you last sync?
First of all launch iTunes on your computer and go to Edit>Preferences>Devices. Do you see any backups for you iPad in that window? If so, how new is the newest backup? That will be the backup that you will want to use. But remember that if you use that backup and it is one month old, you can only restore from that date back in time. Anything that you did on the iPad in the past month will not be in that backup.
Turn on the new iPad Minin and start activating OTA via WiFi. You will get to a certain point in the process where you will be given the choice to Set up as new, Restore from iCloud - or Restore from iTunes. You will want to select Restore from iTunes.
That is the short and sweet version. There are step by step instructions in this article. This applies to the mini as well as the iPad 4 or the iPad 3 for that matter.
http://www.everythingicafe.com/how-to-set-up-new-ipad/2012/03/16/

Need to know how to get my apple account to sync up with a new email on my phone and delete the old one in a step by step process??

Need to know how to get my apple account to sync up with a new email on my phone and delete the old one in a step by step process??

After you change the account settings as I described below hold your finger on any app until they all wriggle, then tap the "-" on each purchased with her Apple ID. Press the HOME button when done. Then go to the App Store and buy or download the apps you want.

HT4972 I have an Ipod touch version 4.2.1 and the instructions do not detail how to update to iOS 5. Can you help with me step by step instructions.

I have an Ipod touch version 4.2.1 and the instructions do not detail how to update to iOS 5. Can you help me with step by step instructions.

iOS 4.2.1 suggests that you may have 2nd generation Touch, which cannot be updated past iOS 4.2.1
Check http://support.apple.com/kb/HT1353 for help in identifying your model. A quicker method may be to check the back casing. If your iPod has Model No.A 1288 etched into it, then it's a 2nd gen Touch.
Assuming that you are using the latest version of iTunes (today, that is 10.6.3), to check if your iPod can be updated, connect it to your iTunes and look on the Device/Summary pane. Select Check for Updates. If there is one, you will see a message telling you that and how to install it. However, if you see a message saying that your iPod is up-to-date, then it cannot be updated.

Hi all, complete novice to this so step by step answers much appreciated please. thank you. Ibooks app showing in my itunes apps but wont sync with my ipod touch - have tried deleting app in itunes then re-downloading but still wont sync, any ideas please

hi all, complete novice to this so step by step answers much appreciated please. thank you. Ibooks app showing in my itunes apps but wont sync with my ipod touch - have tried deleting app in itunes then re-downloading but still wont sync, any ideas please?

See if this helps
iBooks: Viewing, syncing, saving, and printing PDFs on iPhone, iPad, and iPod touch

Please help me with the step by step instructions on how to install a Windows server 2008 on a computer that has Windows 8 installed on it

Please help me with the step by step instructions on how to install a Windows server 2008 on a computer that has Windows 8 installed on it without formatting windows 8.Please email the steps , Thanks

Please help me with the step by step instructions on how to install a Windows server 2008 on a computer that has Windows 8 installed on it without formatting windows 8.Please email the steps , Thanks
Assuming your rig can support virtual machines, you can use Hyper-V and run another OS there.
Better practice however is to use a dedicated machine and use remote desktop to the server.
Corsair Carbide 300R with window
Corsair TX850V2 70A@12V
Asus M5A99FX PRO R2.0 CFX/SLI
AMD Phenom II 965 C3 Black Edition @ 4.0 GHz
G.SKILL RipjawsX DDR3-2133 8 GB
EVGA GTX 6600 Ti FTW Signature 2(Gk104 Kepler)
Asus PA238QR IPS LED HDMI DP 1080p
ST2000DM001 & Windows 8.1 Enterprise x64
Microsoft Wireless Desktop 2000
Wacom Bamboo CHT470M
Place your rig specifics into your signature like I have, makes it 100x easier to understand!
Hardcore Games Legendary is the Only Way to Play!

Install Oracle 11gr2 on Windows 2008 R2 with ASM step by step Guide needed

Hi,
I am looking for a step by step guide on installing Oracle 11gr2 on Windows 2008 R2 with ASM etc. This is not a RAC environment since ASM architecture is a bit different in 11gR2, I would appreciate if anyone can point me to a guide to follow or provide a one.
Thanks in advance.
Sujith

Hi Sujith;
I am looking for a step by step guide on installing Oracle 11gr2 on Windows 2008 R2 with ASM etc. This is not a RAC environment since ASM architecture is a bit different in 11gR2, I would appreciate if anyone can point me to a guide to follow or provide a one.You need to install grid first(Software only) its neccessary for ASM, Than you need to use asmca to create asm disks than you need to install 11gr2
All doc avaliable at:
http://www.oracle.com/pls/db112/homepage
Regard
Helios

I just replaced my hard drive and am trying to install the Snow Leppard OS on my Mac mini using the DVD's that came with the unit. Is there a step by step procedure that will guide me through this process?

I just replaced my hard drive due to failure in my Mac mini. I am trying to load the Snow Leppard OS from the DVD's that came with the unit. Is there a step-by-step procedure somewhere that would help me? This is my first problem with my first Mac. I thought getting to the hard drive and changing it would be the hard part but I made it through that with little trouble. My lack of software experience on the Mac is really slowing me down. I believe I'm not making the right choices in the Disk Utility program.Any help would be greatly appreciated. Thank you.

Prep the new drive:
Drive Preparation
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
Upon completion quit DU and return to the installer. Install OS X. When the installation has completed you can proceed to restore your data from your backups. If you have an existing backup from Time Machine or another hard drive then upon completing the Setup Assistant you will have an option to restore from another Mac, a TM backup, or another drive. Use the appropriate option.

QC Adapter with SolMan - step by step guidance, if possible please

Similar Messages

Maybe you are looking for