QCI Error Unable to confirm Load

Hello Export,
I created bulk shipment and a statue of shipment is 2 Schedule (O4F2). I am unable to proceed further up to 6 Completely Confirmed.  At the time of load confirmation (O4G1 )
I am getting below Heard error
u201CQuantity Conversion Interface: No response fro external programs u201C
Question : 1
What are the steps involve to confirming the bulk shipment.
Please help me.
Regards,
Gaurang

Dear Gaurang,
The problem is not the business process of Shipment confirmation.
Execute: ROIB_QCI_CALL_TEST program
IF you use RFC Server: You must be sure that the RFC connection is working
If you use Call System then: indicate the folder where you have these files :
Files required for QCI Functionality
AGA3.EXE
AGA3.OUT
AGA8.EXE
AGA8.OUT
AGA8DL.EXE
AGA8DL.OUT
AGA8GS.EXE
AGA8GS.OUT
AGA83.EXE
AGA83.OUT
AGA83M.EXE
AGA83M.OUT
AGASAP.EXE
astm.exe
gssapi32.dll
IF you are sure that you have ASTM (server or Fonction module) then go to :
IMG >Industry solution oil and Gas >HPM>Quantity conversion interface>define conversion group and external function module settings
Select the table of your product and double click on external function calls and sequence
In FM (function module ) tab choose your method of call (ASTM call)
Via :  QCI server = 4
Via  : external program at OS level = 3. Save
If you save your ASTM files in kernel folder : usr\.....\run and same case usr\....\exe within
FM tab put only : Astm and not all your Path (sometime it s not working)
I hope that can help.
Regards,
SA

Similar Messages

  • Error: Unable to Load Database

    Anyone seen this error: "Unable to Load Database"? How to recover? A link or a page for me to read would work too. thx! James

    The usual cause for this is that the database has become corrupted - or one or more key files was somehow deleted. Take a look at the application log and see if there is a more detailed message. Unfortunately, if the data has been corrupted, you will have to recover from backup, or rebuild your cube.To get the database started, you can go into the database directory and delete the *.ind, *.pag, *.tct, *.ind and *.esm files. This will allow the app to start, but the data will be GONE - you will HAVE to reload and calc it, or restore from backup.Regards,Jade--------------------------------Jade ColeSenior Business Intelligence ConsultantClarity [email protected]

  • Unable to down load file error 1321?

    Unable to down load file error 1321?
    Error_Message

    Hi grahamg,
    Please see my response in your other post: I am unable to download  Acrobat message reads Insuffient prileges to modify the file C:\ Program Files [ x 86] Adobe\ Acrobat 11.0\Acrobatwow_exe.
    Best,
    Sara

  • Why is it that when I am trying to install an adobe product, I get 33% of the way through and then it gives me an error "unable to load metafile"??  It happened with Reader and now with Flashplayer.  With the Reader, I was able to find a different install

    Why is it that when I am trying to install an adobe product, I get 33% of the way through and then it gives me an error "unable to load metafile"??  It happened with Reader and now with Flash player.  With the Reader, I was able to find a different installation link using the troubleshooting guide.  I cannot find the same with flash player.  Please tell me how to install Flash player because there is a website that I cannot even view without it.  BTW That is annoying that I cannot even see the website without flash player
    my system is XP

    Use these installers:
    Flash Player for ActiveX (Internet Explorer)
    Flash Player Plug-in (All other browsers)
    Flash Player for Mac OS X
    For Adobe Reader go to http://get.adobe.com/reader/enterprise/

  • Database, Dataset, Table Adaptors Error "Unable to load, Update requires a valid DeleteCommand when passed DataRow collection with deleted row"

    Microsoft Visual Basic 2010 Express.
    I am new to Visual Basic programing and i am trying to understand the relationships between Datasets, database, table Adaptors. I have to following code that is is giving me the following error" Unable to load, Update requires a valid DeleteCommand
    when passed DataRow collection with deleted rows". 
    I can track the error and its located in "OffsetTableTableAdapter.Update(MaterionOffsetDataSet.OffsetTable)" code. What am i missing?
    It seems that i can delete the data on the DataGridView Table and it only displays the correct data. but my database is not updating, even though the data grid displays differently.I can determine this because, when i save the offset database, i have all
    the previous uploads and all the rows that i wanted to delete are still there.
    My final goal is to be able to import offset data from a CSV file, save this data on the pc, send a copy of this data to a NuermicUpDown so the customer can modify certain numbers. From here they download all the date to a controller.  IF the customer
    needs to modify the imported data, they can go to a tab with a data grid view and modify the table. They will also have to option to save the modified data into a csv file.  
    Im not sure if i am making this overcomplicated or if there is a easier way to program this.
    CODE:
    Private Function LoadOffSetData()
            Dim LoadOffsetDialog As New OpenFileDialog 'create a new open file dialog and setup its parameters
            LoadOffsetDialog.DefaultExt = "csv"
            LoadOffsetDialog.Filter = "csv|*.csv"
            LoadOffsetDialog.Title = "Load Offset Data"
            LoadOffsetDialog.FileName = "RollCoaterOffset.csv"
            If LoadOffsetDialog.ShowDialog() = Windows.Forms.DialogResult.OK Then  'show the dialog and if the result is ok then
                Try
                    Dim myStream As New System.IO.StreamReader(LoadOffsetDialog.OpenFile) 'try to open the file with a stream reader
                    If (myStream IsNot Nothing) Then 'if the file is valid
                        For Each oldRow As MaterionOffsetDataSet.OffsetTableRow In MaterionOffsetDataSet.OffsetTable.Rows
                            oldRow.Delete()                       
    'delete all of the existing rows
                        Next
                        'OffsetTableTableAdapter.Update(MaterionOffsetDataSet.OffsetTable)
                        Dim rowvalue As String
                        Dim cellvalue(25) As String
                        'Reading CSV file content
                        While myStream.Peek() <> -1
                            Dim NRow As MaterionOffsetDataSet.OffsetTableRow
                            rowvalue = myStream.ReadLine()
                            cellvalue = rowvalue.Split(","c) 'check what is ur separator
                            NRow = MaterionOffsetDataSet.OffsetTable.Rows.Add(cellvalue)
                            Me.OffsetTableTableAdapter.Update(NRow)
                        End While
                        Me.OffsetTableTableAdapter.Update(MaterionOffsetDataSet.OffsetTable)
                        MainOffset.Value = OffsetTableTableAdapter.MainOffsetValue          'saves all the table offsets
    to the offset numericUpDown registers in the main window
                        StationOffset01.Value = OffsetTableTableAdapter.Station01Value
                        StationOffset02.Value = OffsetTableTableAdapter.Station02Value
                       myStream.Close() 'close the stream
                        Return True
                    Else 'if we were not able to open the file then
                        MsgBox("Unable to load, check file name and location") 'let the operator know that the file wasn't able to open
                        Return False
                    End If
                Catch ex As Exception
                    MsgBox("Unable to load, " + ex.Message)
                    Return False
                End Try
            Else
                Return False
            End If
        End Function

    Hello SaulMTZ,
    >>I can track the error and its located in "OffsetTableTableAdapter.Update(MaterionOffsetDataSet.OffsetTable)" code. What am i missing?
    This error usually shows that you do not initialize the
    DeleteCommand object, you could check this
    article to see if you get a workaround.
    >> Im not sure if i am making this overcomplicated or if there is a easier way to program this.
    If you are working CSV file, you could use OleDB to read it which would treat the CSV file as a Table:
    http://www.codeproject.com/Articles/27802/Using-OleDb-to-Import-Text-Files-tab-CSV-custom
    which seems to be easier (in my opinion).
    Regards.
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Flex Builder 3 Error: Unable to load SWC

    Hi,
    I am trying to use the YahooMaps component (YahooMaps.swc) in
    my application. I have included it in the build path of my
    application.
    Steps followed:
    1. Right-click on the project and choose Properties or open
    the Project menu and choose Properties.
    2. In the project properties dialog, choose Flex Build Path.
    3. Select the Library path tab, and press the Add SWC...
    button.
    4. Selected the YahooMap.swc
    I still get "Unable to load SWC: YahooMap.swc". It is an AS
    3.0 component. Any help will be appreciated.
    Thanks
    Sumit

    Hi Peter,
    Thank you for your reply.
    I have followed the documentation on the site you provided.
    All I have done so far is:
    1. Create a new flex project in Flex Builder 3
    2. Once the project is created, I try to add the YahooMap.swc
    to my Flex build path.
    3. Once I add the YahooMap.swc, it fails with the error
    "Unable to load YahooMap.swc" in Flex Builder 3.
    4. FB3 does not recognize YahooMap when I try to import it in
    AS3.
    import com.yahoo.maps.api.YahooMap;
    I am not sure what I am doing wrong. Does it have to do
    something with the version Y! has used to build the YahooMap.swc
    and Flex Builder 3?
    Thanks
    Sumit

  • Error "Unable to load word breaker for locale 0. Error code 8007007e." with search service application.

    I recreate the Search service application and the default Content source stayning in the 'Recovering' status.
    The log give multiple error 'Unable to load word breaker for locale 0. Error code 8007007e.'
    The default language is English and the reference in registry for word breaker dll is naturallanguage1.dll but I found only the naturallanguage6.dll.

    Hi,
    For your issue, check your current language settings and ensure that search supports the current language.
    On the SharePoint Server open Registry Editor (Start -> type “Regedit” and hit enter). 
    Point to : HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\OfficeServer\14.0\Search\Setup\ContentIndexCommon\LanguageResources\Default\English
    Under the registry key for each of the languages there is a value called StemmerDLLPath and WBDLLPathOverride
    Updated the registry entry with NATURA~1.dll to NATURA~2.dll
    Point to Start -> Administrative Tools -> Services, right click on SharePoint Server Search 14 and click on Restart.
    Performed a Full Crawl and wait for the Full Crawl to complete and try searching again.
    For more detailed information, refer to the following blogs:
    http://blog.ithinksharepoint.com/2008/04/20/a-word-breaker-was-not-found-for-the-given-language-error-when-crawling-content/
    http://www.sharepoint2013.me/Blog/Post/175/Word-breakers-in-SharePoint-2013
    Best Regards,
    Lisa Chen
    Lisa Chen
    TechNet Community Support

  • CSA MC Install error: Unable to load patch information

    When we try to install CSA MC 5.2.0.263 (and 5.2.0.203) on Windows Server 2003 Ent Ed (or R2) we receive error:
    "Unable to load patch information into the database"
    How to solve the given error?

    Just a couple things to check. If running the CSA agent on the MC make sure its disabled during the upgrade
    You have enough free space in the installation directory

  • SGEN: error: Unable to load one or more of the requested types. Retrieve the LoaderExceptions property for more information.

    Hi,
    I appollogize if this post is off topic. I have problem wiht publish WebApp MVC.
    I have website (MVC) with one Web reference. Build and run in VS working. But when I tried to publish to disk I get error:
    SGEN: error: Unable to load one or more of the requested types. Retrieve the LoaderExceptions property for more information.
    I have VS2013 Profesional with all updates and Windows 8.1.
    If I remove web reference then publishing working. Where can be a problem? Thanks.

    @Marek Bober,
    Thanks for sharing the solution back to here.
    Best regards,
    Barry
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Web Report Viewer error - Unable to load client print control.

    Dear All,
    We have a problem with Report Viewer print funtionality. Getting the error "Unable to load client print control." on click of Print button.
    We tried all solutions posted in web - nothing resolves the issue.
    The print works fine when we open the report via a browser. But the same is not working through our application. We have the application installed on the Report server itself and the user has Admin previleges.
    Please find below the details
    Report control: ReportViewerWebControl.axd
    Version: 9.0.30729.4402
    SQL server version: SQL Server 2008 R2, 10.50.2500.0 (running on Windows Server 2008 R2 - 64 bit)
    Your help on this would be highly appreciated. Please let me know if you need any specific information.
    Thanks,
    Naga
    Nagaraja

    Hi, Larry,
    Thank you for your answer which remind me and lead me to the resolution. I have struggling on this SQL Server Report Server 2012/Client printing control for
    2 days.
    I just cannot figure out why it kept prompting non-admin XenApp users for SSRS installation. Thanks for your notes again.
    I have 2008 R2 server setup as XenApp server for the publish apps. We published the IE to user to access Web application with SQL 2012 reporting service in
    the backend.
    In the control environment, users do not have permission to install any software. This SSRS has to be installed as administrator under “Install mode” in XenApp
    server.
    Yes, 32bit IE works for me but 64bit IE works too.
    You just need to ensure which version of IE you’re using to install the SSRS. I’m not aware of using 32bit IE for SSRS installation in server but publish 64bit
    IE to client.  That’s my mistake.
    Thanks again. 
    JohnnyW2012

  • Unable to confirm transfer order due to error message "enter a storage unit

    Hi guys:
    I am unable to confirm transfer order due to error message popping up and saying "enter a storage unit", and I tried to search it in whole thread in the forum,it was suggestion to pick up destination storage unit via ls24, but I did went to ls24 and trying to click that line(transfer order) but unable to find the storage unit, so is there another way to fix it?

    Hi Allen...
    Pls check if your Storage Type is SU Active. If yes, then system will create a storage unit according to the setting done for the storage unit management, perhaps in your case you are confirmin TO for the putaway.
    Pls confirm and revert
    Regards
    Shiva

  • Oracle ODBC  - Internal Error - unable to initialize NLS during driver load

    I'm having some trouble with my ODBC connections which I hope someone can please help me with!
    About 6 weeks ago all was working as normal.
    As far as I know there have been no updates to the ORacle DB, the Windows XP operating system or the ODBC Drivers.
    Today when I opened access and visual case 2 to connect to Oracle I was at first greeted with a:
    unable to connect SQLState=IM004 SQL_HANDLE_ENV
    error. ODBC also kept crashing.
    I restarted the computer and was confronted with a different error:
    odbc SQLSTate 08004 ORA 12154 TNS could not resolve the connect identifier specified
    I was able to fix this error by setting the environment variable TNS_ADMIN in windows xp environment variables. I'm extremely confused about how this happened though as it was working and I don't think anything has changed.
    I was then able to connect to the database via Microsoft Access but when I opened Visual Case 2 and tried to make an update, I was confronted with the following error:
    Oracle ODBC Driver - internal error - unable to initialize NLS during driver load
    I looked in the registry at:
    HKEY_LOCAL_MACHINE\SOFTWARE\Oracle\KEY_OraClient10g_home1
    HKEY_LOCAL_MACHINE\SOFTWARE\Oracle\KEY_OraClient10g_home2
    HKEY_LOCAL_MACHINE\SOFTWARE\Oracle\KEY_OraDb10g_home1
    and NLS_LANG was set to "AMERICAN_AMERICA.WE8MSWIN1252" in all 3 places.
    (Though KEY_OraClient10g_home2 only had 4 entries as opposed to KEY_OraClient10g_home1's 13 entries)...
    Since I made those changes I can no longer connect through Access.
    I just receive a ODBC - connection to 'xxx' failed
    Advice greatly appreciated!!!!
    Edited by: user11150264 on Aug 25, 2009 10:21 PM

    Actually it sort of does...
    I switched the ODBC connection to use instant client and now it's all working again.
    The biggest mystery is what changed to make it suddenly stop working the old way...

  • TS1717 I get the error "unable to load data class info from sync services" and eventually itunes freezes-will anything in this article help?

    I get the error "unable to load data class info from sync services" and eventully itunes freezes.  will this article help me?

    Hello there brigidfromca.
    Messages can always be pretty daunting when we're not sure where to start. I was able to locate the following Knowledge Base article that discusses the very message you're getting:
    iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert
    http://support.apple.com/kb/TS2690
    It is a pretty thorough document with multiple steps to review, but looks to be great place to start for a resolution for you.
    Thanks for using Apple Support Communities to reach out to us for answers.
    Cheers,
    Pedro D.

  • Error: Unable to load the GSS-API Shared Library

    Hi all,
    I'm trying to install a working copy of SAP on a Debian Etch host. I've tried all versions available here: ftp://ftp.sap.com/pub/sapgui/java/  (710 r[2-6])  The jar installer completes successfully without error, but when I attempt to launch the application, I'm greeted with the same critical error each time. Here's my connection string:
    conn=/M/my-server-hostname/S/3610/G/PRD_GENERIC&sncon=true&sncqop=3
    Here's my (Sun) java version:
    java version "1.6.0_06"
    Java(TM) SE Runtime Environment (build 1.6.0_06-b02)
    Java HotSpot(TM) Server VM (build 10.0-b22, mixed mode)
    Here's the full error message:
    Error: Unable to load the GSS-API Shared Library
    named "sncgss.so"
    Fri Nov 21 16:07:25 2008
    Release 710
    Component SNC (Secure Network Communication), version 5
    rc = -1, module sncxxdl_mt.c, line 342
    Detail SncPDLInit
    System Call dlopen
    Is there a software dependency I might be missing? This is my first attempt at installing SAP on a Linux host, so there may be something else even more obvious that I'm not seeing...
    Thanks in advance for any help you can provide.
    -Eric

    Hi,
    one solution should be to set the env variable $SNC_LIB to you libseude.so, e.g.
    $>setenv SNC_LIB /usr/sap/<sid>/SYS/exe/run/libsecude.o (or wherever the lib resides)
    and then restart guilogon.
    Also, as fas as I know, SAPGUI has issues with Java 6, so I would rather go with Java 5 or 1.4.2.
    Oliver Stabel

  • JVM Loader Error: Unable to find supported JDK or JRE version

    Hello,
    I am trying to use Visibroker (Borland version 6.5) with JDK 1.5.2
    When I try to run idl2java, it gives me the following message:
    JVM Loader Error:
    Unable to find a supported JDK or JRE version. The JVM Version should be either 1.3.1 or 1.4.1 and above.
    Check your installation and use -VBJjavavm or -javahome(vbj only) to specify the JDK or JRE location
    I am using eclipse IDE - i created an external tool configuration for idl2java giving the argument *.idl
    I looked in the forum and tried the suggestions given in this thread
    http://forum.java.sun.com/thread.jspa?threadID=376403&messageID=3052413
    Where am I going wrong. Can someone help me?
    Thaks
    Manju

    Hi,
    I don't know if you got an answer to this problem. It looks like you need to install Borland Service Pack 1 (for BES 6.5) to fix this issue. I spent a couple of days squirming, trying to figure out this issue.
    Hope this helps.
    Regards,
    Sony.

Maybe you are looking for