QCI Implementation in SAP ECC 6.0 having IS OIL
Hi All,
I have a problem implementing QCI in my SAP ECC 6.0 having IS OIL. The SAP note 619060 details how this can be done.
The note provides the C source programs which can be compiled to build executables qci_srv executable, which will be used to register the QCI_SERVER RFC. This executable is required to be placed into the SAP kernel.
The C source programs also helps us create the astm.exe and agasap.exe executables.
May be the guidelines are pretty much clear, where i dont have a understanding is-
how to compile these programs,
what compiler to use,
do i need to have a programming background,
do i need to have the SAP RFC SDK kit?
I need answers on these, please help me with this, also any guidence is welocme.
Dear Rahul,
The astm.exe and qci server methods of calculation are limited to one standard which is planned to be changed this year (2008). The implementation of the rfc server solution is also critically dependent upon many hard and software factors, a change in any one of these can result in the necessity of a re-implementation. I would recommend that the company wishing to implement the qci server take a look at our offerings [www.quantityware.com] as we are currently the only SAP-Certified integration offering for complex gas, petroleum, chemicals calculations with IS-Oil&Gas.
We offer speed, security, accuracy and multiple standards coverage all rounded off with good support.
Best Regards,
John.
Similar Messages
-
To implement SAP HCM module in existing SAP ECC 6.0
Hi,
I have SAP ECC 6.0 system already implemented 2 years back.
I am planning to implement SAP HCM with OM, PA, SAP Time management, SAP PAYROLL in existing SAP ECC 6.0 system.
I have currently 3 system landscape for SAP ECC.
I would like to know what change/addition is required in above landscape to implement SAP HCM module in existing SAP ECC 6.0
Do share your view.
Regards.Hi.
As per you, Already designed Landscape. Why dont you follow you existing Landscape which is alredy proved for other modules.
Normally Dev/Quality/Production clients will there..
If more that depends upon flexibility in Each client and defining different business for testing and production interfaces purpose.
Better use Existing only remaining modules already sucessfully running in Production Right???? -
Sql Server configuration requirements for SAP ECC 6.0
Dear All,
I am using Sql server 2005 Enterprise as data store for Sap ecc 6.0.There are certain configuration requirements to be done while installing it so that sapinst.exe (sap installer) is able to use it to create its own DB's.
For eg it requires a collation of SQL_Latin1_General_CP850_BIN2 whereas the default that gets installed is SQL_Latin1_General_CP1_CI_AS.
Like this there are other requirements which I am not aware of.Most of the docs available on the Internet are talking of ecc 6.0 with Oracle 10.2G which is the most common combination.I am having docs for this combination.
I am installing ecc for the first time.
*I am unable to download docs from sap. marketplace as it requires a login given to certified users or sap purchasers.I am neither.*
Can anyone help me with this.If anyone has ECC 6.0 installation guide with sql server it will be serve my purpose.
Thanks for your efforts."Excuse me?
What he is doing is illegal , you know what that means, right? If you don't believe me, read the license that comes on the first installation DVD.
Actually, I even think it's kind of barefaced to ask in the forum of the software vendor for help! I mean, it's like asking in a bank forum how to rob and fraud the bank! You - and many others - may think that it's right and ok to do that. I tell you: it is not. Not for "home use", not for personal use, not at all.
You can use the software available here in the SDN to lean and study, that's why it's there.
If you deal at all with copied software, then just be smart enough to make other people not notice. He can be happy if he's not prosecuted (which would legally be possible)."
Do u understand what is legal or illegal? Have u read the license in full?
The license does not put any limit on the number of users.So if I am using it means that one more user has been added by the license holder.
Therefore there is nothing illegal about it.
It would have unethical (not illegal) if the software is being used for a business purpose other than for which it has been purchased.
Since it being used for training purpose the above does not hold good.
In fact it is SAP who is benefited in the long run bec' after a person learns it technology because he is going to implement it somewhere, for which the concerned user will have to purchase a license.Therefore I am helping SAP to increase its business.
But there are some stupid people who don't understand these things but are ready to shout at the top of their voice thinking themselves to be intelligent.
Edited by: coolmind26 on Jun 5, 2011 10:57 AM -
File system for SAP ECC, EP , BI and CRM installation on Solaris/DB2
Hello,
We are going to implement SAP ECC 6.0 with EP 7, BI and CRM on Solaris operating system with IBM DB2 database.
All these applications are going to be installed on single server, as being a basis person, I know this is not all recommended.
But due to client's requirement and keeping cost factor in mind I need to install all these application on single box.
Now here I need your help. as I basis person, I know the required Solaris file system for SAP ECC 6.0 but not having any Idea about other application like EP/ CRM and BI .
If anyone able to help me with required Solaris file system. it will be great help.
Please let me know if there is any query.
Thanks.> All these applications are going to be installed on single server, as being a basis person, I know this is not all recommended.
> But due to client's requirement and keeping cost factor in mind I need to install all these application on single box.
Why not using Solaris zones/container? This decreases the administrative amount tremendeously since you will deal as with "single machines" but they all run together on one box.
> Now here I need your help. as I basis person, I know the required Solaris file system for SAP ECC 6.0 but not having any Idea about other application like EP/ CRM and BI .
So you'd need to read the installation guides
Markus -
Org management (integration with SAP ECC 6) and shopping cart approval
Background:
We currently use EBP 3.0 - Classic Scenario.
Our current Organisational plan was manually created in EBP, and is not the same as the HR hierarchy in SAP ECC 6
Shopping cart approvals use the workflow WS10000276 u2013 Approval Single Level over Limit, which utilises the SLAPPROVER attribute. The user name assigned to the SLAPPROVER attribute does not have to be the manager of the user. To meet our Business requirements, a fairly flat structure was created at the time we implemented EBP 3.0. The approval level an approver is allowed to approve up to is controlled with the use of roles assigned to a user. Each of the approval roles has an appropriate value set against the BBP_APPROVAL_LIMIT attribute under Personalisation.
Moving onu2026
We are just about to move from EBP 3.0 to SRM 7.0 u2013 Classic Scenario - by carrying out a new installation.
Our Business requirement has changed, in that they want the approval of shopping carts to be carried out by the line manager, if that person can approve the value of the shopping cart. If not, for the approval to go up the HR hierarch until a manager with a suitable level of approval is found.
I believe it is possible to create the Organisational structure in SRM from the HR hierarchy in SAP ECC 6. I have tried to do this in our play/test system using - Integration Business Partner-Organizational Management, without much success as yet!
I have a few questions in this area:
1. Not all of the users in the SAP ECC 6 HR hierarchy will be SRM users. E.g. In the SAP
hierarchy there are 3 users u2013 User A, User B and User C. User B is the manager of User
A and User C is the manager of user B. In SRM only User A and User C are users. That
being the case, is it still possible to initially create the organisational in SRM from SAP ECC6?
2. If it is possible to create the organisational structure as described, then using Process
Controlled Workflow we could use the Shopping Cart BC Set One-step manager approval.
If we did this, what would be the best way to incorporate the approval limit of a manager?
Can this be simply achieved by setting the BBP_APPROVAL_LIMIT attribute in conjunction
with the One step manager approval?
We want to avoid having to use the SLAPPROVER attribute due to the high level of
maintenance we currently experience.
Thanks to anyone who can advise me.
ClaireHello Clarie,
this might help
HR Data Synchronization (Org Unit, Position and Employee) to SRM
Arshad -
ITS is not working after the Upgrade to SAP ECC 6.0
Hi Folks
ITS is not working as it supposed to be after upgrading to SAP ECC 6.0
When I try to connect thru ITS i m getting HTTP 404 and HTTP 500 Errors
Can some one throw some ideas.
But web AS is running perfectly alright.
Thanks
JayHi Priya,
You need to Implement the following SNOTE's for these changes.
Union Budget 2015: As per Finance Bill 2015, the Government has implemented amendments to existing sections and introduced new sections in the Income Tax Act. Changes have been made in the following topics:
Tax Surcharge Rate
Increase in Conveyance Allowance
Section 80
Sukanya Samriddhi Scheme: The Government has launched this new deposit scheme for the minor girl child. This is a savings scheme that can be opened by the natural (biological) or legal guardian of a girl child aged below 10 years. Related Notes:
2139208 - Union Budget Changes – 2015
2138605 - Sec80C: Sukanya Samriddhi Scheme
Upcoming Developments:
PF Admin Charges Revision
Professional Tax for Mizoram & Nagaland states
Average Rate of Tax
Regards,
Venkat Polisetty -
Key functional differences between SAP ECC Version 6.0 and SAP Version 4.6
Hi Forum,
As we are currently updgqrading to SAP ECC Version 6.0 from SAP Version 4.6, could someone please identify what are the new functionalities are being offred in SAP ECC 6.0.
Please let me know or guide me in a right direction - my email address is [email protected] or simply reply to the forum.
Thank you
YogeshDear Yogesh,
Please go through Upgrade info @ service.sap.com.
http://help.sap.com/saphelp_erp2005vp/helpdata/en/43/6880cbb88f297ee10000000a422035/frameset.htm
http://solutionbrowser.erp.sap.fmpmedia.com/
Major difference is ECC6 is netwear product having WASJAVA+ABAP
secondly support unicode apart from this we have other diff. you can get fom master guide from service.sap.com/instguides
For installing ECC 6.0 you required a solution manager key.With out solutionmanager key you cannot install ECC6.0.
For ECC 6.0 is called netweaver component here you have ABAP+JAVA stack.
ECC6.0 supports UNCODE.
For installing 4.6 you don't required solution manager key.It only having ABAP stack.
4.6C supports NONUNICODE.
Hope this would add some more info.
Regards,
Naveen. -
Error while upgrading SAP R/3 Enterprise 4.7 to SAP ECC 5.0
Dear SAP,
We are on the process of upgrading SAP R/3 Enterprise 4.7 with Ext:110 to SAP ECC 5.0.But during the VERSCHK_INI phase an error is been thrown showing that
"The start release configuration :
SAP_ABA :620
SAP_APPL :470
SAP_BASIS :620
SAP_HR:470.....is not supported "
At this stage we decided to continue with this by ignoring the VERSCHK_INI phase,but it gave us a warning that to continue with the next phase(TOOLVERSIOn_INI phase) we require a password.
we searched in several documents even in the documents along with the cd but was not able to find a password for this or a solution for the error in phase VERSCHK_INI.
I request team SAP to help us in this regard.Expecting your reply ASAP.
Thanks and Regards
Anantha Raman E.Were you able to find a resolution to this problem. We are also having a similar problem in our prepare phase and cannot find anything to help us as yet.
Thanks,
Barry Keating -
Integrate with a vendor from SAP ECC 6.0 for 'PunchOut' functionality
Hi Friends,
Pardon me if I have made mistakes in using the terminology in my posting. We just use SAP ECC 6.0 and no SRM. We want to integrate with a vendor for so-called Punchout. Our users will click a URL link from our Intranet and it takes them to Vendor's catalog website. They can choose items and create a shopping cart. The website will return us a unique Shopping Cart ID with list of Items in cxml format. We can use that information and create PO. We are not familiar with cxml format and how to process the PO. Is this a standard functionality in SRM ? I don't think we can install SRM since we don't have Business suite license. If any one has experience with above scenario, ie connecting to vendor's cataglog from SAP ECC 6.00 without SRM, can you pl share with us ?
NiranjanHi Masa
Thanks for the reply. The vendor supports OCI as well. However, since I was not familiar with it, I was thinking to go with cXML. When I opened the OCI pdf in the URL that you mentioned, it talks about SRM server. Like I had mentioned earlier, we don't use SRM at our company here. Can you let me know in couple of steps how OCI works and how fast we can implement in our ERP ECC 6.0 environment ? I am delighted to note that one of the companies in Japan implemented in 4 hours.
Thanks for your help,
Niranjan -
Automatic creation of contract in SAP ECC from ESO
Hello Experts,
We are installing SAP ESO 5.1, with integration package, linked to a SAP ERP 5.0 system.
With the out-of-the box integration package, it is possible to create an outline agreement (contract) from an ESO Master Agreement / Agreement by selecting Scripts -> Publish to ERP from the toolbar (this can only be done if the Master Agreement is in a "saved" state). This is a manual process.
My question is: is it possible to automatically execute this script by means of Workflow?
The goal would be for E-Sourcing to always create a contract in the SAP ECC backend system from a completed ESO Master Agreement. I believe this can be achieved by executing a script at the "saved" event?
I'll appreciate your feedback on this approach, or any other solutions you might have implemented with customers to reach a solution to a similar requirement.
Thanks!
Regards,
Gilberto GallardoHi Gilberto
I would not suggest "Publish to ERP " to me made a post save script as contract managers/ buyers might "save" a draft version of the master agreement which might still need some validation. Also since a word contract is not in place at this point in time, there might be changes later on which could make the situation rather messy.
In case you are going for approval workflows in phase definition of contract, you can use "Publish to ERP " as a postscript for workflow when contract finally is moved to executed phase but again would support Howie here that it should remain a manual process since a lot of validations would be required.
A lot depends on business on what they consider to be the culimination of CLM cycle. Few would like to start transactions through oultine agreement before actual contract is signed to speed up the process while many would like to wait for the actual signed document to be in place before starting transactional procurement.
Regards
Mudit Saini -
Transfer of data from SAP ECC 6.0 to E-Recruitment
Hi,
We are implementing E-recruitment . SAP ECC and E-Recruitment are running in different servers.How to transfer data from following Infotypes from SAP ECC 6.0 to E-Recruitment .
IT0002 Personal Data to 5102 Candidate Information
IT0006 Address Data to 5110 Address Rule
IT0105 Communication Data to 5110 Address Rule
IT0022 - Education to 5104 - Education
IT0023 Others/Previous Employers to 5103 - Work Experience
IT0024 - Qualifications to 5105 - Qualifications
Regards,
Somi .Hello,
in general IT5103, 5104 and 5105 are not part of the standard distribution model. Without special customer own ALE development you will not be able to transfer these information.
Check SLG1 - application log for entries.
did you the initial data upload or did you only transfer changes?
If you did the initial data transfer be sure the user running the IDOC import has the correct rights. Be sure noone changed the usage of IT0000 STAT2 as e-recruiting expects value 3 for active employees. Furthermore be sure to be informed about the handling of hirings in future.
If you only wanted to transfer updates. PFAL is not the right way. Be sure you activated the change pointers correctly. Use RBDMIDOC. And be sure to implemet the latest Notes. There had been an error that changes were only processed in e-recruiting if at least IT0000, 0001 and 0002 were changed which resulted in problems when only IT 0006 was updated. In this case the update was not transfered to e-recruiting.
Best regards
Roman Weise -
Tool or Package to run fuctionality of CRM in SAP ECC 6.0
Hi All
My requirement is to run multiple product schemes for free goods. We have not implemented CRM in our company. I know standard SAP support 1:1 free goods functionality,but am looking for tool or package which will help me to run the process like CRM. We have implemented Multi-product free goods process( eg:- 5+1 bye any 5 material out which one material is free.) Now the business require same product with bundle schemes and one to one free goods schemes.
To achieve this process am looking for tool or package which will provide me functionality like CRM
Regards
AvinashHi
If I understood you correctly, you are looking for many to one and one to many relation in free goods. Right?
As you already know in standard SAP there is 1:1 ratio allowed. There is no standard functionality which can support many to many or many to one or one to many free goods in SAP ECC. This has always been done through ABAP or by using BOM functionality.
Thank$ -
Migration of Smartforms / SAPScript forms from SAP R/3 4.7 to SAP ECC 6.0
Dear Members,
We are in process of re-implementing SAP with SAP ECC 6.0 from SAP R/3 version 4.7
We have created many layouts using SAPScripts & SAP Smartforms in SAP R/3.
My question is, are there any migration tools available in SAP ECC 6.0 in the form of function modules, BAPI etc to convert existing forms of Smartforms / SAPScripts created in SAP R/3 4.7 to SAP ECC 6.0 ?
Or do we have to design all existing forms created in R/3 once agin in SAP ECC 6.0 ?
We request our dear members to share their views on the above mentioned problems faced by us in the re-implementation project
Thanking you,
With best regards,
K. Rangarajan
ABAP Programmer
Strides Arcolab Limited
Bangalore, INDIADear Friend,
As per our consultant's view, we are not upgrading from SAP R/3 4.7 to SAP ECC. We are re-implementing; that is, we are going to implement SAP ECC as if we are doing it for the first time ever in our company. This is due to drastic organizational changes happend in our company. So, upgrading from R/3 is not feasible solution, according to our consultants.
So, we have to re-configure all settings in SPRO manually in ECC based on our new business scenario. There will be new company codes, plants, business area etc., which will be totally different from existing R/3 system.
But the template definitions of the existing forms maintained in SAPScript / Smartforms will remain same.
There are 50+ forms (boith SAPScript / Smartforms put together) and manual re-designing of all those forms will be tedious within the scheduled date of GO Live.
In that case, to avoid re-designing, what is the best method that can prevent manual re-design of Smartforms?
For SAPscripts, I got some good news from our some of our dear forum members.
Thanking you,
With best regards,
K. Rangarajan -
Dispacher not getting Started...SAP ECC 6.0 on Win2K3 and Oracle.
HI Experts,
I have installed SAP ECC 6.0 (OS-Win2003sp2 DB-Oracle10g). Installation was successful, I have also logged in and created a user in SU01. But when I restart the system I am not able to up the sapserver. SAP MMC - dispacher is not starting. I have started OracleListener in service.sap and restarted the system. Un-installed and again installedj2sdk1.4.2_12 and restarted the system...No use, still dispatcher is not getting up....Pls find below paster Developer Trace for Dispatcher....
trc file: "dev_disp", trc level: 1, release: "700"
sysno 00
sid PRD
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 111
intno 20050900
make: multithreaded, Unicode, optimized
pid 2200
Wed Oct 28 09:26:27 2009
kernel runs with dp version 229000(ext=109000) (@(#) DPLIB-INT-VERSION-229000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ****
***LOG Q00=> DpSapEnvInit, DPStart (00 2200) [dpxxdisp.c 1239]
* shared lib "dw_xml.dll" version 111 successfully loaded*
* shared lib "dw_xtc.dll" version 111 successfully loaded*
* shared lib "dw_stl.dll" version 111 successfully loaded*
* shared lib "dw_gui.dll" version 111 successfully loaded*
* shared lib "dw_mdm.dll" version 111 successfully loaded*
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Wed Oct 28 09:26:32 2009
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds*
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5361]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >sap_PRD_00 <
DpShMCreate: sizeof(wp_adm) 18672 (1436)
DpShMCreate: sizeof(tm_adm) 4232256 (21056)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
DpShMCreate: sizeof(comm_adm) 528064 (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1536)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 06810040, size: 4892312)
DpShMCreate: allocated sys_adm at 06810040
DpShMCreate: allocated wp_adm at 06812090
DpShMCreate: allocated tm_adm_list at 06816980
DpShMCreate: allocated tm_adm at 068169B0
DpShMCreate: allocated wp_ca_adm at 06C1FDF0
DpShMCreate: allocated appc_ca_adm at 06C25BB0
DpShMCreate: allocated comm_adm at 06C27AF0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 06CA89B0
DpShMCreate: allocated gw_adm at 06CA89F0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 06CA8A20
DpShMCreate: allocated wall_adm at 06CA8A28
MBUF state OFF
DpCommInitTable: init table for 500 entries
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 511 blocks reserved for free list.
ES initialized.
J2EE server info
start = TRUE
state = STARTED
pid = 2404
argv[0] = E:\usr\sap\PRD\DVEBMGS00\exe\jcontrol.EXE
argv[1] = E:\usr\sap\PRD\DVEBMGS00\exe\jcontrol.EXE
argv[2] = pf=E:\usr\sap\PRD\SYS\profile\PRD_DVEBMGS00_sap
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=1048
argv[5] = -DSAPSYSTEM=00
argv[6] = -DSAPSYSTEMNAME=PRD
argv[7] = -DSAPMYNAME=sap_PRD_00
argv[8] = -DSAPPROFILE=E:\usr\sap\PRD\SYS\profile\PRD_DVEBMGS00_sap
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1629]
Wed Oct 28 09:26:33 2009
***LOG Q0K=> DpMsAttach, mscon ( sap) [dpxxdisp.c 11753]
DpStartStopMsg: send start message (myname is >sap_PRD_00 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
Wed Oct 28 09:26:34 2009
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 111
Release check o.K.
DpJ2eeLogin: j2ee state = CONNECTED
Wed Oct 28 09:26:51 2009
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4248]
ERROR => NiIRead: SiRecv failed for hdl 4 / sock 1444*
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:1063) [nixxi.cpp 4248]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=2404)
ERROR => DpProcKill: kill failed [dpntdisp.c 371]*
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Wed Oct 28 09:27:13 2009
ERROR => W0 (pid 2412) died [dpxxdisp.c 14441]*
ERROR => W1 (pid 2420) died [dpxxdisp.c 14441]*
ERROR => W2 (pid 2428) died [dpxxdisp.c 14441]*
ERROR => W3 (pid 2436) died [dpxxdisp.c 14441]*
ERROR => W4 (pid 2444) died [dpxxdisp.c 14441]*
ERROR => W5 (pid 2452) died [dpxxdisp.c 14441]*
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W6 (pid 2460) died [dpxxdisp.c 14441]*
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W7 (pid 2468) died [dpxxdisp.c 14441]*
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W8 (pid 2476) died [dpxxdisp.c 14441]*
ERROR => W9 (pid 2484) died [dpxxdisp.c 14441]*
ERROR => W10 (pid 2492) died [dpxxdisp.c 14441]*
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W11 (pid 2500) died [dpxxdisp.c 14441]*
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W12 (pid 2508) died [dpxxdisp.c 14441]*
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes*
DISPATCHER EMERGENCY SHUTDOWN ****
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1577
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Oct 28 09:27:23 2009
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Wed Oct 28 03:57:23 2009
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 2412 Ended no 1 0 0
1 DIA 2420 Ended no 1 0 0
2 DIA 2428 Ended no 1 0 0
3 DIA 2436 Ended no 1 0 0
4 DIA 2444 Ended no 1 0 0
5 DIA 2452 Ended no 1 0 0
6 UPD 2460 Ended no 1 0 0
7 ENQ 2468 Ended no 1 0 0
8 BTC 2476 Ended no 1 0 0
9 BTC 2484 Ended no 1 0 0
10 BTC 2492 Ended no 1 0 0
11 SPO 2500 Ended no 1 0 0
12 UP2 2508 Ended no 1 0 0
Dispatcher Queue Statistics Wed Oct 28 03:57:23 2009
===========================
--------++++--+
| Typ | now | high | max | writes | reads |
--------++++--+
| NOWP | 0 | 2 | 2000 | 6 | 6 |
--------++++--+
| DIA | 5 | 5 | 2000 | 5 | 0 |
--------++++--+
| UPD | 0 | 0 | 2000 | 0 | 0 |
--------++++--+
| ENQ | 0 | 0 | 2000 | 0 | 0 |
--------++++--+
| BTC | 0 | 0 | 2000 | 0 | 0 |
--------++++--+
| SPO | 0 | 0 | 2000 | 0 | 0 |
--------++++--+
| UP2 | 0 | 0 | 2000 | 0 | 0 |
--------++++--+
max_rq_id 12
wake_evt_udp_now 0
wake events total 8, udp 7 ( 87%), shm 1 ( 12%)
since last update total 8, udp 7 ( 87%), shm 1 ( 12%)Hi,
Could you please also paste dev_w0 logs ?
Thanks
Sunny -
SAP ECC 6.0 System Performance
Gentlemen,
Please advise me with the following scenario, which is Iu2019m facing a problem with system performance,
My system configuration is: SAP ECC 6.0
Database System: Oracle 10.2.0.2.0.
Server Configuration: Power 6
Processor Type: PowerPC_POWER6
Processor Implementation Mode: POWER 6
Processor Version: PV_6_Compat
Number Of Processors: 6
Processor Clock Speed: 3503 MHz
CPU Type: 64-bit
Kernel Type: 64-bit
LPAR Info: 2 PRODUCTION
Memory Size: 47104 MB
Good Memory Size: 47104 MB
Platform Firmware level: EL340_039
Firmware Version: IBM,EL340_039
The following Information was generated from TCode: sm51:
SAP Release Information
Application Server SAPPRD_PRD_00
SAP Kernel Information
SAP Kernel : 700_REL
Database Client Library : OCI_101
created in : AIX 2 5 005DD9CD4C00
Support Level : 0
Kernel Patch number : 202
Source ID : 0.202
DBSL Patch No. : 046
ICU Version : 3.0 Unicode Version 4.0.1
libsapu16 Version : 1.0025 Apr 8 2009 16:21:08
Supported Environment
SAP Database Version
700
Database
ORACLE 9.2.0..
ORACLE 10.1.0..
ORACLE 10.2.0..
Operating System
aix 1 5
aix 2 5
aix 3 5
aix 1 6
My active parameter in Tcode : RZ10 as follow:
Parameter Name Parameter value
login/accept_sso2_ticket 1
login/create_sso2_ticket 2
rsau/enable 1
login/failed_user_auto_unlock 0
login/fails_to_user_lock 5
gw/max_sys 2000
gw/max_overflow_size 25000000
rdisp/max_comm_entries 2000
rdisp/tm_max_no 2000
gw/max_conn 2000
rdisp/max_arq 2000
ES/SHM_SEG_COUNT 8192
ES/SHM_USER_COUNT 8192
ES/SHM_SEG_SIZE 2048
ES/TABLE SHM_SEGS
ztta/short_area 4000000
em/global_area_MB 256
zcsa/db_max_buftab 10000
sap/bufdir_entries 10000
enque/table_size 60000
rsdb/obj/large_object_size 35000
rsdb/obj/max_objects 45000
rsdb/obj/buffersize 150000
rdisp/gui_auto_logout 0
login/password_expiration_time 0
rdisp/max_wprun_time 25000
login/multi_login_users CICUSER,TALSAYED,ASALAM
login/disable_multi_gui_login 1
SAPSYSTEMNAME PRD
SAPSYSTEM 0
INSTANCE_NAME DVEBMGS00
DIR_CT_RUN $(DIR_EXE_ROOT)/run
DIR_EXECUTABLE $(DIR_INSTANCE)/exe
PHYS_MEMSIZE 8000
exe/saposcol $(DIR_CT_RUN)/saposcol
rdisp/wp_no_dia 70
rdisp/wp_no_btc 20
exe/icmbnd $(DIR_CT_RUN)/icmbnd
icm/server_port_0 PROT=HTTP,PORT=80$$
ms/server_port_0 PROT=HTTP,PORT=81$$
rdisp/wp_no_enq 1
rdisp/wp_no_vb 2
rdisp/wp_no_vb2 2
rdisp/wp_no_spo 10
abap/buffersize 9900000
zcsa/table_buffer_area 108003328
rtbb/buffer_length 60000
rsdb/cua/buffersize 24000
zcsa/presentation_buffer_area 28166144
rdisp/appc_ca_blk_no 2000
rdisp/wp_ca_blk_no 1000
rsdb/ntab/entrycount 68500
rsdb/ntab/ftabsize 100000
rsdb/ntab/irbdsize 20000
rsdb/ntab/sntabsize 3995
DIR_ROLL /usr/sap/PRD/DVEBMGS00/data
DIR_PAGING /usr/sap/PRD/DVEBMGS00/data
DIR_DATA /usr/sap/PRD/DVEBMGS00/data
DIR_REORG /usr/sap/PRD/DVEBMGS00/data
DIR_TRANS /usr/sap/trans
DIR_TEMP /tmp
DIR_SORTTMP /usr/sap/PRD/DVEBMGS00/data
zcsa/system_language E
zcsa/installed_languages AE
abap/use_paging 0
ztta/roll_first 1024
rdisp/keepalive_timeout 8000
ztta/roll_area 9000960
rdisp/ROLL_SHM 16384
rdisp/ROLL_MAXFS 32768
rdisp/PG_SHM 16384
rdisp/PG_MAXFS 200064
abap/heap_area_dia 2012217344
abap/heap_area_nondia 2012217344
abap/heap_area_total 2012217344
abap/heaplimit 40894464
abap/swap_reserve 20971520
ztta/roll_extension 2101346304
em/initial_size_MB 4092
em/blocksize_KB 4096
em/stat_log_size_MB 20
em/stat_log_timeout 0
login/no_automatic_user_sapstar 0
login/system_client 100
icm/server_port_1 PROT=SMTP,PORT=8025,TIMEOUT=180
rdisp/start_icman TRUE
icm/host_name_full SAPPRD.tmg.dom
install/codepage/appl_server 4102
ipc/shm_psize_10 500000000
ipc/shm_psize_14 0
ipc/shm_psize_18 0
ipc/shm_psize_19 0
ipc/shm_psize_30 -10
ipc/shm_psize_40 500000000
ipc/shm_psize_41 0
ipc/shm_psize_51 -10
ipc/shm_psize_52 -10
ipc/shm_psize_54 -10
ipc/shm_psize_55 -10
ipc/shm_psize_57 -10
ipc/shm_psize_58 -10
I already generated EWA report and I got the following result:
1. Performance Overview PRD
The performance of your system was analyzed with respect to average response times and total workload. We have detected some problems that may impair system performance.
To ensure adequate performance in your core business transactions, you should take corrective action as soon as possible. For further information, please SAP Support.
Rating Check
Performance Evaluation
The following table shows the average response times for various task types:
Task type Dialog Steps Avg. Resp. Time in ms Avg. CPU Time in ms Avg. Wait Time in ms Avg. Load Time in ms Avg. DB Time in ms Avg. GUI Time in ms
DIALOG 212990 1595.2 257.7 31.0 5.0 622.2 136.8
RFC 2904 11876.4 192.1 33.1 1.4 10574.2 0.0
UPDATE 86257 116.1 28.4 2.1 2.9 58.1 0.0
UPDATE2 1100 84.6 16.9 1.3 1.4 48.2 0.0
BATCH 11600 189360.5 46218.1 5.5 3.7 132313.5 0.0
SPOOL 9989 1686.8 37.1 55.6 0.3 49.2 0.0
1.1. Current Workload
The following table lists the number of current users (measured from our workload analysis) in your system.
Users Low Activity Medium Activity High Activity Total Users
Measured in System 162 119 6 287
1.2. Performance Evaluation
The measured times are compared against reference times to provide a rating.
- If the number of dialog steps in an hour is less than 1000 this hour is not considered.
- If the total number of transaction steps is less than 24000, the rating for the task is not performed and a blue line is entered in the table.
The table below shows that a performance problem is expected for the task that is rated YELLOW.
Task Steps Application Server Performance Database Server Performance
Dia 212987
Upd 86257
HTTP 0
Rating Task Time Steps Avg. Response Time (ms) Avg. CPU Time (ms) Avg. Database Time (ms)
Dia 08-09 3726 1343 137 889
Dia 09-10 19990 1003 174 620
Dia 10-11 20603 1747 112 630
Dia 11-12 27934 2437 239 612
Dia 12-13 18921 2737 235 858
Dia 13-14 21579 2163 349 549
Dia 16-17 22529 1134 230 703
Dia 17-18 12189 1709 561 991
Dia 19-20 5840 1550 414 967
Dia 20-21 4951 1294 176 454
The ratings in the table above are determined by comparisons against the reference table below.
If the dialog response times are very poor, it will cause a RED rating for the entire check.
Task Reference for Avg. Response Time (ms) Reference for Avg. DB time (ms)
Dia 1200 600
Upd 2400 1200
HTTP 1200 600
1.3. Transaction Profile Check
The following tables show the response times and the number of dialog steps for the transactions that cause the highest workload in your system. NOTE: A business transaction normally consists of more than one dialog step. As a rough estimate, the actual number of business transactions that are executed in your system is approximately one third of the total dialog steps shown. (Transaction CPIC/RFC is not taken into account.)
1.3.1. Transactions by Total Workload
The following tables list the activities with the highest contribution to the total workload.
WORKLOAD BY TRANSACTION (DIALOG/UPDATE)
Transaction Type Dialog Steps Total Resp. Time in % Avg. Resp. Time in ms Avg. CPU Time in ms Avg. DB Time in ms Avg. GUI Time in ms
Total 299247 100.0 1168.9 191.7 459.6 136.8
ZFIBB DIA 8592 11.1 4522.4 2258.5 633.4 30.1
ZFIRP DIA 6641 7.3 3858.0 1089.7 1162.6 50.0
RECN DIA 11644 6.8 2047.9 129.1 1165.8 202.6
SESSION_MANAGER DIA 8972 5.7 2226.9 80.2 244.2 458.2
ZFICCR DIA 4834 5.2 3775.9 138.4 2535.9 195.6
ZRECPD DIA 8895 4.6 1790.1 85.9 525.3 329.4
FBL3N DIA 10414 4.1 1386.7 109.3 971.8 49.1
ZFIOBC2 DIA 852 3.4 13909.2 2675.7 9302.3 1028.7
ZREOR DIA 2241 3.3 5216.1 2246.2 808.1 357.5
ZFIOB DIA 1176 3.2 9503.7 51.3 8287.0 753.4
38.1% of the "Total Resp. Time" in the above table is caused by customer transactions.
WORKLOAD BY TRANSACTION (BATCH/SPOOL)
Transaction Type Dialog Steps Total Resp. Time in % Avg. Resp. Time in ms Avg. CPU Time in ms Avg. DB Time in ms
Total 21492 100.0 102913.8 24939.7 71399.3
SBIE0001 BTC 36 98.7 60613763.4 14848709.4 42408448.0
ZFIPR SPO 448 0.2 7939.6 169.9 387.1
(BATCH) BTC 7368 0.2 478.4 7.5 22.2
ZFIADCA SPO 486 0.1 5733.7 168.6 177.9
RSAL_BATCH_TOOL_DISPATCHING BTC 96 0.1 23895.0 1964.7 21770.3
ZFIJV SPO 309 0.1 6092.5 107.7 89.5
SAPRSLOG BTC 4 0.1 318475.8 69165.0 257824.5
ZRE_GENERATE_COND_RO BTC 5 0.1 250075.0 3336.0 237287.8
ZRE_AUTO_REJECT_OFFER BTC 20 0.1 57062.0 339.0 54977.8
ZRE_TRANSFER_TOCONT_UPL BTC 346 0.0 3161.3 941.6 2327.7
0.6% of the "Total Resp. Time" in the above table is caused by customer transactions.
According to our analysis, the main system load is caused by background jobs.
The EarlyWatch Alert Service can only detect performance problems for dialog, update and RFC response times. This service does not evaluate performance problems for background jobs.
1.3.2. Transactions by DB Load
The following transaction profiles list the transactions that have the greatest share in the database load, sorted by percentage of total database access times.
DATABASE LOAD BY TRANSACTIONS (DIALOG/UPDATE)
Transaction Type Dialog Steps Total DB Time in % Avg. DB Time in ms
Total 299247 100.0 459.6
RECN DIA 11644 9.9 1165.8
ZFICCR DIA 4834 8.9 2535.9
FBL3N DIA 10414 7.4 971.8
ZFIOB DIA 1176 7.1 8287.0
ZRECCR DIA 1504 7.0 6368.3
ZFIOBC2 DIA 852 5.8 9302.3
ZFIRP DIA 6641 5.6 1162.6
ZFIBB DIA 8592 4.0 633.4
ZFIREMTCH DIA 73 3.5 66443.6
ZRECPD DIA 8895 3.4 525.3
45.3% of the "Total DB Time" in the above table is caused by customer transactions.
DATABASE LOAD BY TRANSACTIONS (BATCH/SPOOL)
Transaction Type Dialog Steps Total DB Time in % Avg. DB Time in ms
Total 21492 100.0 71399.3
SBIE0001 BTC 36 99.5 42408448.0
RSAL_BATCH_TOOL_DISPATCHING BTC 96 0.1 21770.3
ZRE_GENERATE_COND_RO BTC 5 0.1 237287.8
ZRE_AUTO_REJECT_OFFER BTC 20 0.1 54977.8
SAPRSLOG BTC 4 0.1 257824.5
ZRE_TRANSFER_TOCONT_UPL BTC 346 0.1 2327.7
RSPO1043 BTC 4 0.0 143273.5
ZFIPR SPO 448 0.0 387.1
(BATCH) BTC 7368 0.0 22.2
ZFIADCA SPO 486 0.0 177.9
0.3% of the "Total DB Time" in the above table is caused by customer transactions.
Please advice.
Regards,
AhmedGentlemen,
Please advise me with the following scenario, which is Iu2019m facing a problem with system performance,
My system configuration is:
SAP ECC 6.0 , Oracle 10.2.0.2.0 , Kernel Patch number : 202 , DBSL Patch No. : 046
Server Configuration:
Power 6 , Processor Type: PowerPC_POWER6 , Processor Implementation Mode: POWER 6 , Processor Version: PV_6_Compat , Number Of Processors: 6 , Processor Clock Speed: 3503 MHz , CPU Type: 64-bit , Kernel Type: 64-bit , LPAR Info: 2 PRODUCTION , Memory Size: 47104 MB , Good Memory Size: 47104 MB , Platform Firmware level: EL340_039 , Firmware Version: IBM,EL340_039
My active parameter in Tcode : RZ10 as follow:
Parameter Name Parameter value
rsau/enable 1
login/failed_user_auto_unlock 0
login/fails_to_user_lock 5
gw/max_sys 2000
gw/max_overflow_size 25000000
rdisp/max_comm_entries 2000
rdisp/tm_max_no 2000
gw/max_conn 2000
rdisp/max_arq 2000
ES/SHM_SEG_COUNT 8192
ES/SHM_USER_COUNT 8192
ES/SHM_SEG_SIZE 2048
ES/TABLE SHM_SEGS
ztta/short_area 4000000
em/global_area_MB 256
zcsa/db_max_buftab 10000
sap/bufdir_entries 10000
enque/table_size 60000
rsdb/obj/large_object_size 35000
rsdb/obj/max_objects 45000
rsdb/obj/buffersize 150000
rdisp/max_wprun_time 25000
DIR_CT_RUN $(DIR_EXE_ROOT)/run
DIR_EXECUTABLE $(DIR_INSTANCE)/exe
PHYS_MEMSIZE 8000
exe/saposco $(DIR_CT_RUN)/saposcol
rdisp/wp_no_dia 70
rdisp/wp_no_btc 20
exe/icmbnd $(DIR_CT_RUN)/icmbnd
rdisp/wp_no_enq 1
rdisp/wp_no_vb 2
rdisp/wp_no_vb2 2
rdisp/wp_no_spo 10
abap/buffersize 9900000
zcsa/table_buffer_area 108003328
rtbb/buffer_length 60000
rsdb/cua/buffersize 24000
zcsa/presentation_buffer_area 28166144
rdisp/appc_ca_blk_no 2000
rdisp/wp_ca_blk_no 1000
rsdb/ntab/entrycount 68500
rsdb/ntab/ftabsize 100000
rsdb/ntab/irbdsize 20000
rsdb/ntab/sntabsize 3995
abap/use_paging 0
ztta/roll_first 1024
rdisp/keepalive_timeout 8000
ztta/roll_area 9000960
rdisp/ROLL_SHM 16384
rdisp/ROLL_MAXFS 32768
rdisp/PG_SHM 16384
rdisp/PG_MAXFS 200064
abap/heap_area_dia 2012217344
abap/heap_area_nondia 2012217344
abap/heap_area_total 2012217344
abap/heaplimit 40894464
abap/swap_reserve 20971520
ztta/roll_extension 2101346304
em/initial_size_MB 4092
em/blocksize_KB 4096
em/stat_log_size_MB 20
em/stat_log_timeout 0
install/codepage/appl_server 4102
ipc/shm_psize_10 500000000
ipc/shm_psize_14 0
ipc/shm_psize_18 0
ipc/shm_psize_19 0
ipc/shm_psize_30 -10
ipc/shm_psize_40 500000000
ipc/shm_psize_41 0
ipc/shm_psize_51 -10
ipc/shm_psize_52 -10
ipc/shm_psize_54 -10
ipc/shm_psize_55 -10
ipc/shm_psize_57 -10
ipc/shm_psize_58 -10
I already generated EWA report and I got the following result:
Performance Evaluation
The following table shows the average response times for various task types:
Task type Dialog Avg. Resp. Avg. CPU Avg. Wait Avg. Load Avg. DB Avg. GUI
DIALOG 212990 1595.2 257.7 31.0 5.0 622.2 136.8
RFC 2904 11876.4 192.1 33.1 1.4 10574.2 0.0
UPDATE 86257 116.1 28.4 2.1 2.9 58.1 0.0
UPDATE2 1100 84.6 16.9 1.3 1.4 48.2 0.0
BATCH 11600 189360.5 46218.1 5.5 3.7 132313.5 0.0
SPOOL 9989 1686.8 37.1 55.6 0.3 49.2 0.0
1.1. Current Workload
The following table lists the number of current users (measured from our workload analysis) in your system.
Low Activity Medium Activity High Activity Total Users
162 119 6 287
1.2. Performance Evaluation
Task Time Steps Avg. Response Avg. CPU Avg. Database
Dia 08-09 3726 1343 137 889
Dia 09-10 19990 1003 174 620
Dia 10-11 20603 1747 112 630
Dia 11-12 27934 2437 239 612
Dia 12-13 18921 2737 235 858
Dia 13-14 21579 2163 349 549
Dia 16-17 22529 1134 230 703
Dia 17-18 12189 1709 561 991
Dia 19-20 5840 1550 414 967
Dia 20-21 4951 1294 176 454
Task Reference for Avg. Response Time (ms) Reference for Avg. DB time (ms)
Dia 1200 600
Upd 2400 1200
HTTP 1200 600
Please advice.
Regards,
Ahmed
Maybe you are looking for
-
Getting a NPE when calling the getContent of a multipart message
Hi, I get a NPE when I try to get the body of a multipart MIME message. The BODYSTRUCTURE returns the number of bytes of a bodypart before any decoding is done, the getContent then expects server to return that many bytes when it does something like
-
IPod does not play anything. But...
My iPod video will not play anything. It doesn't freeze, it doesn't skip, it just won't play anything. The buttons are functioning, and I've tried the 5Rs, it just won't play anything. The time stays at 0:00, and I'm able to do things like go back to
-
If I start a blog and "fix" the blog entry layout. Is there some way to save that so I dont have to re-design it every time i wanna make a new entry?
-
Strange 'Top Window' behavior in L8
I've noticed this one for a while - curious if it's a common 'bug'. When L8 is open and I switch to another app, like Safari for example, sometimes one or two of Logic's plugin windows will remain 'on top' of my display. I have to go back and switch
-
Sharepoint - 401 unauthorized authentication error
Hi, We had successfully configured Duet on our system. Tested the same with a working web service. As per the new requirement we configured duet workflow on our system. Now when the SP developer, tries to create a new content type from sharepoint des