QDL3 QM

Hello Gurus,
Can anyone tell me the link between material and dynamic modification rule in QM and abt creating a quality level in QDL1 t code
Helpfull answers will be rewarded
Thanks
Suresh

HI,
USE OF DYNAMIC MODIFICATION RULE IN INSPECTION.
FOR EX.
IF IN YOUR PLANT THERE ARE 30 INSPECTION LOTS ARE CREATED IN EVERY MONTH,i.e. ONE LOT ON EVERY DAY.
AND YOU WANT THAT ONLY ONE INSPECTION LOT SHOULD BE
CHECKED & ALL OTHER LOTS MUST BE SKIPPED.IN THIS CASE
YOU CAN USE DYNAMIC MODIFICATION RULE PROVIDED THAT YOUR ALL LOTS SHOULD BE ACCEPTED AND NOT REJECTED.
HERE YOU HAVE TO INSPECT ONLY ONE LOT & ACCEPT IT & ALL OTHER LOTS ARE SKIPPED,YOU HAVE TO MAKE ONLY U.D.
THERE IS NO NEED TO MAKE RESULT RECORDING OF REMAINING 29 LOTS.
YOU HAVE TO ENTER DYNA. MOD.RULE IN INSP. PLAN & MATL. MASTER QM. VIEW.
QDL1 IS USED FOR CREATION OF QUALITY LEVEL WITH RESPECT TO MATERIAL & PLANT.IN THIS RULE
Number of inspections and/or inspection lots that have been accepted
without inspection (skipped) or that have been completed on the basis of
the dynamic modification valuation since the last inspection stage
change.
HOPE THIS WILL HELP YOU.
THANKS
REGARDS
PRAVIN K. FULWADE.

Similar Messages

QDL3- MIC updation

Dear Team,
I have one specfic issue relation to the updation of Master inspection characteristics in the QDL3 transaction with reapect to the inspection plan.
For example
Let say i have the following in my inspection plan
Operation No. 2000, Mic No. 0010,Mic Name "weight" & DMR is "DM1" (that means after first accepted lot this will move to the skip lot max 999)
QDL3 : Yes i have the above MIC and it already reached the skip status (count is let say 20)
Now my problem is.
Due to some reasons if i delete this MIC (0010) from the inspection plan but still i am see this data in the QDL3 transaction (Note: only MIC discription is removed, other data not remove in the QDL3 or QDQL table) Total line item is not deleted from this transaction.
After some time, If I add new mic, this is beeing added as Mic no. 0010 in the operation 2000. This new mic description is replaced in the QDL3 transaction with all the old value for the Deleted MIC. (Since the operation no and the Mic number are same)
As i understand that this transaction QDL3 will be updated after the UD only.
Meanwhile
Please let me know that how to identify the new added MIC in the QDl3 transaction. (I have check QDQL table also)
Thanks in advance
Selvam

You can reset the quality levels at transaction QDH1.
and
You can change or delete the quality level manually at transaction QDL2.
Regards
Luke

Material Stock is not Updated in T.Code MC.9

I am running Material stock report in T.code MB5B it is showing the correct stock report but when i execute T.code MC.9 (Material Analysis) it is showing difference of Rs 96015 This difference is whatever transaction we have made in Movement type 121 it will not get updated in MC.9.
Can anyone having solution of this.
Thanks
Kalpesh

If lot is in SKIP status then stok posting tab will not appear. You need to find out DMR rule which is causing SKIP status.
You can easily check this in QDL3 or you can do one thing. Go to QDL2 and change next stage as "100 - Inspect" so system should create next lot as inspection. You would be able to do RR & UD.

QM Tables and T codes

can anybody tell hw many QM Tables and T codes are ther in total approx.
and if possible which r imp. one?atleast tables.
thnx

Dear Sandip,
Important QM Tables
Area Table Description
Master Data QMAT Inspection type - material parameters
Master Data QMHU QM Link Between Inspection Lot and Handling Unit Item
Master Data QMTB Inspection method master record
Master Data QMTT Inspection Method Texts
Master Data QPAC Inspection catalog codes for selected sets
Master Data QPAM Inspection catalog selected sets
Master Data QPMK Inspection characteristic master
Master Data QPMT Master Inspection Characteristics Texts
Master Data QPMZ Assignment table - insp. methods/master insp. characteristic
Master Data TQ01D Authorization groups for QM master data
Master Data TQ01E Text authorization groups for QM master data
Master Data TQ21 Assignment of screens to screen groups
Master Data TQ25 QM:screen sequence for master and inspection characteristics
QM Master Data
Catalog QPCD Inspection catalog codes
Catalog QPCT Code texts
Catalog QPGR Inspection catalog code groups
Catalog QPGT Code group texts
Catalog TQ07 Follow-Up Action for Usage Decision of Inspection Lot
Catalog TQ07A QM: Function Modules for Follow-Up Action
Catalog TQ07T Language-dependent texts for Table TQ07
Catalog TQ15 Inspection catalog type index
Catalog TQ15T Language-dependent texts for table TQ15
Catalog TQ17 Defect classes
Catalog TQ17T Language-dependent texts for table TQ17
Catalog
Sample Determination QDEB Allwd. Relationships: Sampling Procedures/Dynamic Mod. Rules
Sample Determination QDEBT Allowed combinations of procedures/dynamic mod. rules: texts
Sample Determination QDPA Sampling scheme-instructions
Sample Determination QDPK Sampling scheme header
Sample Determination QDPKT Sampling scheme: texts
Sample Determination QDPP Sampling scheme item
Sample Determination QDQL Quality level
Sample Determination
Inspection Char TQ17A Weighting of Char
Inspection Char TQ11 Inspection Qualification
Inspection Char TQ29 Tolerance Keys
Inspection Char T006 Unit of measurement
Inspection Char
Dynamic Modification QDBM Valuation mode
Dynamic Modification QDBMT Valuation Mode: Texts
Dynamic Modification QDDR Dynamic modification rule (header)
Dynamic Modification QDDRT Dynamic modification rule: texts
Dynamic Modification QDEP Allowed inspection severities
Dynamic Modification QDEPT Allowed Inspection Severities: Texts
Dynamic Modification QDFB Function modules for the individual procedure categories
Dynamic Modification QDFBT Function Modules for Procedure: Texts
Dynamic Modification QDFM Function modules for valuation mode
Dynamic Modification QDFMT Function Modules for Valuation Mode: Texts
Dynamic Modification QDPS Inspection stages for a dynamic modification rule
Dynamic Modification QDPST Inspection Stages: Texts
Dynamic Modification QDSA Sampling type
Dynamic Modification QDSAT Sampling Type: Texts
Dynamic Modification QDSV Sampling procedure
Dynamic Modification QDSVT Sampling Procedure: Texts
Dynamic Modification TQ39B QM : Activates reference for dyn. modification level
Dynamic Modification
Graphics & SPC QASH Quality control chart
Graphics & SPC QAST Control chart track
Graphics & SPC QPSH Control chart types
Graphics & SPC QPSHT Texts for control chart types
Graphics & SPC QPSP SPC criterion
Graphics & SPC QPSPT Texts for SPC criteria
Graphics & SPC QPST Control chart track
Graphics & SPC QPSTT Texts for control chart tracks
Graphics & SPC
Specifications QMSP QM: material specification
Specifications
Inspection Plan PLKO Inspection plan Header
Inspection Plan MAPL Material Assignement
Inspection Plan PLPO Operation Details
Inspection Plan PLMK Inspection plan characteristics
Inspection Plan PLMW MAPL-Dependent Charac. Specifications (Inspection Plan)
Inspection Plan TQ03 QSS: Control for Screen Texts/TABLE NOT USED (Rel. 4.6)
Inspection Plan TQ29A Dependency tolerance key - nominal measurement
Inspection Plan TQ72 Type of share calculation
Inspection Plan TQ72T Texts for type of share calculation
Inspection Plan TQ75 QM formula parameters
Inspection Plan TQ75F Field names for QM formulas
Inspection Plan TQ75K Short text for Table TQ75F
Inspection Plan TQ75T Description of formula parameters
Inspection Plan
Qm in procurement QINF QM-info record for material and vendor
Qm in procurement TQ02 QM system definition
Qm in procurement TQ02A QM system assignment and QM system requirements
Qm in procurement TQ02B QM system
Qm in procurement TQ02T QM system description
Qm in procurement TQ02U Description QM system
Qm in procurement TQ04A Functions that can be blocked
Qm in procurement TQ04S QM block functions : texts
Qm in procurement TQ05 QM certificate categories for procurement
Qm in procurement TQ05T QM: text table for certificate types
Qm in procurement TQ08 Control of QM in procurement
Qm in procurement TQ08T QM: text for QM procurement keys
Qm in procurement TQ09 QM: agreement of QM document types
Qm in procurement TQ09T QM: agreement of QM document types
Qm in procurement TQ32A Inspection type to status assignment from status profile
Qm in procurement
QM in SD QVDM QM Info Record - QM Control in SD
QM in SD TQ32B Find insp.type for quality insp. for delivery note
QM in SD
Inspectio lot QALS Inspection lot record
Inspectio lot QALT Partial lot
Inspectio lot T156Q Movement Type: Material-Independent Control
Inspectio lot TQ30 Inspection types
Inspectio lot TQ30T Texts for inspection types
Inspectio lot TQ32 Assignment of inspection type to origin
Inspectio lot TQ32C Lot creation allowed values for the origin
Inspectio lot TQ32C _T Texts for lot creation indicator
Inspectio lot TQ33 Relevant fields for origin
Inspectio lot TQ34 Default values for inspection type
Inspectio lot
Inspection point QAPP Inspection point
Inspection point TQ79 Table with inspection point/user field combinations
Inspection point TQ79T Key words for inspeciton point user fields
Inspection point
Results Recording QAES Sample unit table
Results Recording QAKL Results table for value classes
Results Recording QAMR Characteristic results during inspection processing
Results Recording QAMV Characteristic specifications for inspection processing
Results Recording QASE Results table for the sample unit
Results Recording QASR Sample results for inspection characteristics
Results Recording QASV Sample specifications for inspection processing
Results Recording TQ12 Ind. external numbering for test units in results recording
Results Recording TQ12T Texts for the ind. for ext. numbering of units to be insp.
Results Recording TQ70 Control table for results recording
Results Recording TQ70C Function codes for navigation from the char.overview screen
Results Recording TQ70E Screen-based processing tables
Results Recording TQ70F Navigation during results recording
Results Recording TQ70S Characteristic overview screen for results recording
Results Recording TQ73 Origin of results data
Results Recording TQ73T Texts for origin of results data
Results Recording TQ74 Recording configuration
Results Recording TQ74T Recording configuration
Results Recording TQ76 Processing status of inspection characteristics
Results Recording TQ76T Texts for the processing status of insp. characteristics
Results Recording TQ77 Attributes for the Inspection Characteristic
Results Recording TQ77T Text Tables for Attributes
Results Recording TQ78 Status-dependent processing table for insp. characteristics
Results Recording TQ78T Texts for the status-specific proc. table for insp. char.
Results Recording
Defects recording TQ84 Confirmation profile
Defects recording TQ84T Text table for confirmation profile
Defects recording TQ86 Report category for defects recording
Defects recording TQ86A Assignment report category for work center
Defects recording TQ86T Text table for report category
Defects recording V_T35 2B_F Generated table for view V_T352B_F
Defects recording
Usage decision QAMB QM: Link Between Inspection Lot and Material Document
Usage decision QAVE Inspection processing: Usage decision
Usage decision TQ06 Procedure for Calculating the Quality Score
Usage decision TQ06T Language-specific texts for Table TQ06
Usage decision TQ07M QM: Inventory postings with usage decision
Usage decision
Sample Mgmt QPRN Sample drawing of phys. samples
Sample Mgmt QPRS Master record for phys. samples
Sample Mgmt QPRVK Sample-drawing procedure
Sample Mgmt QPRVK T Header for sample drawing procedure texts
Sample Mgmt QPRVP Sample-drawing items
Sample Mgmt QPRVP T Items for sample drawing procedure texts
Sample Mgmt TQ40 Definition of sample types
Sample Mgmt TQ40T Text table for sample type
Sample Mgmt TQ41 Storage locations for physical samples
Sample Mgmt TQ41T Texts for storage locations
Sample Mgmt TQ42 Physical sample containers
Sample Mgmt TQ42T Texts for phys. sample containers
Sample Mgmt
QMIS S068 Vendor statistics
QMIS S069 Material statistics
QMIS S097 QM notifications: Matl anal.
QMIS S098 QM notification: Vendor anal.
QMIS S099 QM notifications: Cust. anal.
QMIS S100 Problems: Material analysis
QMIS S102 Problems: Vendor analysis
QMIS S103 Problems: Customer analysis
QMIS S104 Customer statistics
QMIS S161 Inspection results: General
QMIS S162 Quantitative insp. results
QMIS S163 Quant. Insp. Result: Vendor
QMIS S164 Quant. Insp. Result: Vendor
QMIS S165 Inspection result: gen. custs
QMIS S166 Insp. Results: Quant. Customer
QMIS TQ55 Assign inspection lot origin for update group
QMIS TQ56 Definition of quality score classes
QMIS TQ56T Text table for the definition of quality score classes
QMIS TQ57 Assignment of quality score key to info structure
QMIS
Quality Certificates QCPR QM quality certificates in procurement
Quality Certificates I000 Conditions for certificate profile
Quality Certificates KONDI Conditions: Data part for certificates
Quality Certificates QCVK Certificate profile header
Quality Certificates QCVM Certificate profile characteristic level
Quality Certificates QCVMT Certificate profile characteristic level: texts
Quality Certificates QCVV Certificate Profile: List of Preliminary Products
Quality Certificates TQ61 Result value origin for certificates
Quality Certificates TQ61T Origin of result values for certificates: texts
Quality Certificates TQ62 Output strategy for skip characteristics
Quality Certificates TQ62T Output strategy for skip characteristics: texts
Quality Certificates TQ63 Origin of insp. specs for certificates (function modules)
Quality Certificates TQ63T Origin of inspection specifications for certificates: texts
Quality Certificates TQ64 Origin of characteristic short text for certificates
Quality Certificates TQ64T Origin of characteristic short text for certificates: texts
Quality Certificates TQ65 Certificates: Combinations allowed for origins, specs/values
Quality Certificates TQ67 Certificate-Relevant Output Types
Quality Certificates
Quality Notification QMEL Notification header
Quality Notification QMFE Item
Quality Notification QMSM Task
Quality Notification QMMA Activities
Quality Notification T352C Catalog types for each catalog profile
Quality Notification TQ81 Notification Scenario
Quality Notification TQ81V Usage of parts
Quality Notification TQ81V_T Texts for usage of parts
Quality Notification TQ81_T Texts for Notification Scenarios
Quality Notification TQ82 Change of Notification Type
Quality Notification TQ83 Partner Functions for Codes
Quality Notification TQ85 Function table for follow-up functions
Quality Notification TQ85R Rules for Follow-Up Functions
Quality Notification TQ85_T Action box text table
Quality Notification TQ8CO Assignment of reference orders to notification type
Quality Notification
Other Objects MARA Material Number
Other Objects T001W Plant
Other Objects LFA1 Vendor
Other Objects KNA1 Customer
Other Objects AUFK Order Number
Other Objects SAFK Run Schedule Header Number
Other Objects MCH1 Batch Number
Other Objects MCHA Batch Record
Other Objects EKKO Purchasing Document Header
Other Objects EKPO Purchasing document Item
Other Objects EKET Delivery Schedule
Other Objects VBUK Delivery Header
Other Objects VBUP Delivery Item
Other Objects CSKS Cost Center
Other Objects EQUI Equipment Number
Transaction List:
Q000 Quality management
QA00 Quality inspection
QA01 Create Inspection Lot
QA01A Create Inspection Lot
QA02 Change Inspection Lot
QA02A Change Inspection Lot
QA03 Display inspection lot
QA05 Job planning: Periodic inspection
QA06 Job overview: Periodic inspection
QA07 Trigger for recurring inspection
QA07L Deadline Monitoring Log
QA08 Collective Processing of Insp. Setup
QA09 No. range maintenance for insp.lots
QA10 Trigger automatic usage decision
QA10L Log for Automatic Usage Decision
QA11 Record usage decision
QA12 Change usage decision with history
QA13 Display usage decision
QA14 Change UD without history
QA16 Collective UD for accepted lots
QA17 Job planning for auto usage decision
QA18 Job overview for auto usage decision
QA19 Automatic usage decision
QA22 Change inspection point quantities
QA23 Display insp.point quantities
QA32 Change data for inspection lot
QA32WP QA32 -Call from Workplace/MiniApp
QA33 Display data for inspection lot
QA40 Auto. Usage Decision for Production
QA40L Log for Automatic Usage Decision
QA41 Scheduling UD for Production Lots
QA42 Job planning: UD prod. insp.lots
QA51 Scheduling Source Inspections
QA52 Source inspections: Job overview
QAC1 Change insp. lot actual quantity
QAC2 Transfer stock to insp. lot
QAC3 Reset sample
QAER Display archive objects
QAS1 Download Insp. Specs. (Obsolete)
QAS2 Download Basic Data (Obsolete)
QAS3 Upload Results (Obsolete)
QAS4 Upload UD (Obsolete)
QC01 Create certificate profile
QC02 Change certificate profile
QC03 Display certificate profile
QC06 Immediate delete of cert. profiles
QC11 Create cert. profile assignment
QC12 Change cert. profile assignment
QC13 Display cert. profile assignment
QC14 Create cert.prof.assign.w/copy model
QC15 Create cert. profile assignment
QC16 Change cert. profile assignment
QC17 Display cert. profile assignment
QC18 Create cert.prof.assign.w/copy model
QC20 Certificates for Deliveries
QC21 Quality certificate for the insp.lot
QC22 Quality Certificate for Batch
QC31 Archive display: Delivery item
QC32 Archive display: Inspection lot
QC40 Internet Certificate for Delivery
QC40A Internet Certificate for Delivery
QC42 Batch certificate on WWW
QC51 Create certificate in procurement
QC52 Change certificate in procurement
QC53 Display certificate in procurement
QC55 Worklist: Certificates - Procurement
QCC0 QM: Direct Access to IMG
QCC1 Direct Access to IMG: Notification
QCC2 IMG Direct Access: QM Q-Notification
QCC3 IMG Direct Access: QM Q-Inspection
QCC4 IMG Direct Access: QM Q-Planning
QCC5 IMG Direct Selection: QM Bus. Add-In
QCC_STABI Copy Stability Study Customizing
QCC_STABI_NK Copy Stability Study Number Ranges
QCCC QM standard settings complete
QCCF QM standard forms
QCCK QM standard settings: Catalogs
QCCM QM std. settings: Qual. notifs.
QCCN QM standard number ranges
QCCP QM std. settings: Quality planning
QCCS QM sampling schemes
QCCT QM standard texts
QCCU QM standard settings: Environment
QCCW QM std. settings: Quality inspection
QCCY Transport QM tolerance key
QCCZ QM std. settings: Qual. certificates
QCE2 Edit Communication Support
QCE3 Display Communication Support
QCYF QM standard forms (general)
QCYT QM standard texts (general)
QD21 Mark completed notifications
QD22 Archiving Notifications: Archive
QD24 Archiving Notifications: Delete
QD25 Archiving Notifications: Admin.
QD33 Delete quality level
QD34 Delete quality level planning
QD35 Delete job overview for Q-levels
QDA1 Edit sampling type
QDA3 Display sampling type
QDB1 Maintain allowed relationships
QDB3 Display allowed relationships
QDH1 Q-level evaluation: Change data
QDH2 Q-level evaluation: Display data
QDL1 Create quality level
QDL2 Change quality level
QDL3 Display quality level
QDM1 Edit valuation mode
QDM3 Display valuation mode
QDP1 Create sampling scheme
QDP2 Change sampling scheme
QDP3 Display sampling scheme
QDR1 Create dynamic modification rule
QDR2 Change dynamic modification rule
QDR3 Display dynamic modification rule
QDR6 Disp. where-used list-dyn. mod. rule
QDR7 Replace dynamic mod. rule used
QDV1 Create sampling procedure
QDV2 Change sampling procedure
QDV3 Display sampling procedure
QDV6 Uses: Sampling procedures
QDV7 Replace sampling procedure used
QE00 Quality Planning
QE01 Record characteristic results
QE02 Change characteristic results
QE03 Display characteristic results
QE04 Record sample results
QE05 Change sample results
QE06 Display sample results
QE09 Indiv.display of charac.result
QE09WP Call QE09 from Workplace
QE11 Record results for inspection point
QE12 Change results for inspection point
QE13 Display results for inspection point
QE14 Record results for delivery note
QE15 Change results for delivery note
QE16 Display results for delivery note
QE17 Record results for equipment
QE18 Change results for equipment
QE19 Display results for equipment
QE20 Record results for funct. location
QE21 Change results for funct. location
QE22 Display results for funct. location
QE23 Record results for phys. sample
QE24 Change results for phys. sample
QE25 Display results for phys. sample
QE29 No. Range Maint.: Conf. No. for Char
QE51 Results recording worklist
QE51N Results Recording Worklist
QE52 Worklist: Results for phys. sample
QE53 Worklist: Record results for equip.
QE54 Worklist: Results for funct. loctns
QE71 Tabular res. recording for insp. pts
QE72 Tabular Results Rec. for Insp. Lots
QE73 Tabular res. recording for characs.
QEH1 Worklist for Mobile Results Rec.
QEI1 Displaying QM Interfaces Appl. Log
QEI2 Deleting QM Interfaces Appl. Log
QEW01 Results Recording on Web
QEW01V Variant Maint.: Recording on Web
QF01 Record defect data
QF02 Change defect data
QF03 Display defect data
QF11 Record defects for inspection lot
QF21 Record defects for operation
QF31 Record defects for characteristic
QG09 Maint. num. range Q control charts
QGA1 Display quality score time line
QGA2 Display inspection results
QGA3 Print inspection results
QGC1 Qual. control charts for insp. lots
QGC2 Control charts for task list charac.
QGC3 Control charts for master insp. char
QGD1 Test Equipment Usage List
QGD2 Test Equipment Tracking
QGP1 Results history for task list charac
QGP2 Results History for Task List Charac
QI01 Create quality info. - purchasing
QI02 Change qual.information - purchasing
QI03 Display quality info. - purchasing
QI04 Job planning for QM procurement keys
QI05 Mass maintenance QM procurement keys
QI06 QM Releases: Mass maintenance
QI07 Incoming insp. and open pur. orders
QI08 Job overview of QM procurement keys
QISR Internal Service Request
QISR1 Internal Service Request - Forms
QISR_PCR60 vc_scenario for Message type 60(PCR)
QISR_SM29 ISR Customizing: Table Transfer
QISR_SR12_START Suggestion System
QISRSCENARIO Customizing Szenario
QISRTRANSPORT ISR Customizing Transport
QISRW Internal Service Request on the Web
QK01 Assign QM order to material
QK02 Display assigned QM orders
QK03 Maintain specs. for order type
QK04 Create QM order
QK05 Confirmed activities for insp. lot
QL11 Mat: Distribute Inspection Setup-ALE
QL21 Master Inspection Characs (ALE)
QL31 Distribute Inspection Methods (ALE)
QL41 Distribute Code Groups (ALE)
QM00 Quality Notifications
QM01 Create quality notification
QM02 Change quality notification
QM03 Display quality notification
QM10 Change list of quality notifications
QM10WP QM10 - Call from Workplace/MiniApp
QM11 Display List of Qual. Notifications
QM12 Change list of tasks
QM13 Display list of tasks
QM13WP QM13 - Call from Workplace/MiniApp
QM14 Change list of items
QM15 Display list of items
QM16 Change activity list
QM17 Display activity list
QM19 List of Q Notifications, Multi-Level
QM50 Time line display Q notifications
QMW1 Create quality notification (WWW)
QP01 Create
QP02 Change
QP03 Display
QP05 Print inspection plan
QP06 List: Missing/unusable insp. plans
QP07 List: Missing/Unusable GR InspPlans
QP08 Print task lists for material
QP11 Create reference operation set
QP12 Change reference operation set
QP13 Display reference operation set
QP48 Number Ranges for Physical Samples
QP49 Number range for phys. samp. drawing
QP60 Time-related development of plans
QP61 Display change documents insp.plan
QP62 Change documents ref.operation sets
QPIQS8 QM MiniApp Selection Variant
QPIQS9 QM MiniApp Selection Variant
QPNQ Number ranges for inspection plans
QPQA32 QM MiniApp Selection Variant
QPQGC1 QM MiniApp Selection Variant
QPQM10 QM MiniApp Selection Variant
QPQM13 QM MiniApp Selection Variant
QPR1 Create physical sample
QPR2 Change physical sample
QPR3 Display physical sample
QPR4 Confirm physical sample drawing
QPR5 Manual inspection lots for physSamps
QPR6 Create new phys.-samp. drawing w.ref
QPR7 Storage Data Maintenance
QPV2 Maintain sample drawing procedure
QPV3 Display sample drawing procedure
QS21 Create master insp. characteristic
QS22 Create master insp. charac. version
QS23 Change master insp. charac. version
QS24 Display master insp. charac. version
QS25 Delete master insp. charac. version
QS26 Display characteristic use
QS27 Replace master insp. characteristic
QS28 Display insp. charac. list
QS29 Maintain characteristic number range
QS31 Create inspection method
QS32 Create inspection method version
QS33 Change inspection method version
QS34 Display inspection method version
QS35 Delete inspection method version
QS36 Display inspection method use
QS37 Central replacement of methods
QS38 Display inspection method list
QS39 Maintain method number range
QS41 Maintain catalog
QS42 Display catalog
QS43 Maintain catalog
QS44 Maintain catalog
QS45 Display catalog
QS46 Display code group use
QS47 Central replacement of code groups
QS48 Usage indicator - code groups
QS49 Display code groups and codes
QS4A Display catalog
QS51 Edit Selected Sets
QS52 Display selected set index
QS53 Maintain individual selected set
QS54 Maintain selected set
QS55 Display selected set
QS58 Usage indicator - selected sets
QS59 Display selected sets
QS61 Maintain material specification
QS62 Display material specification
QS63 Maintain material spec: Planning
QS64 Display material spec: For key date
QS65 Activate material specification
QS66 Plan activation of material spec.
QS67 Job overview: Activate mat. spec.
QSR5 Archive inspection plans
QSR6 Delete routings
QST01 Create Stability Study
QST03 Display Stability History
QST04 Display Inspection Plans
QST05 Graphical Scheduling Overview
QST06 Scheduling Overview (StabilityStudy)
QST07 Change Testing Schedule Items
QST08 Display Testing Schedule Items
QSUB Define subsystems
QT00 Test Equipment Management
QT01 Test equipment management
QTSA Product Allocations: Send Quantities
QTSP Product Allocations:Send Customizing
QUERY_BP_FSBPBILDER BP: Screen Customizing for Query
QV01 Create quality assurance agreement
QV02 Change quality assurance agreement
QV03 Display quality assurance agreement
QV04 Find Quality Assurance Agreement
QV11 Create technical delivery terms
QV12 Change technical delivery terms
QV13 Display technical delivery terms
QV14 Search technical terms of delivery
QV21 Create QA agreement (DocType Q03)
QV22 Change Q-agreement (doc. type Q03)
QV23 Display Q-agreement (doc. type Q03)
QV24 Find Q-agreement (doc. type Q03)
QV31 Create Q-spec. (doc.type Q04)
QV32 Change Q-specification (docType Q04)
QV33 Displ. Q-specification (docType Q04)
QV34 Find Q-specification (doc. type Q04)
QV51 Create control for QM in SD
QV52 Change control for QM in SD
QV53 Display control for QM in SD
QVM1 Inspection lots without completion
QVM2 Inspection lots with open quantities
QVM3 Lots without usage decision
QZ00 Quality Certificates
Hope this will help.
Regards,
Naveen.

Quality level not updated

Hi QM Gurus,
I am facing problem in quality level updation through Dynamic Modification rule.
Setup:
Plant level setting - Inspection lot completion - Skip lot and automatic UD time as
1 minute.
Material master - skips allowed and automatic ud masked for inspection type 01-Goods Receipt
Dynamic modification rule created as 1st inspection stage - one lot needs to be inspected. 2nd inspection stage = two lots to be skipped. then again stage go to 1st stage.(Rule is at usage decision level)
I have assigned the same Dynamic modification rule in inspection plan for respective material.
While doing goods receipt (MIGO), first lot comes to inspection stock and 2nd and 3rd lot is skip lot. after 4th lot should come to inspection stock,but it is still skip the inspection.
When i check Quality level for material "Inspection since change" field is not updating based on the DMR. Suppose 1 inspection completed in Skip stage, but the insp. since change is showing 0 only in the display quality level transaction QDL3.
Please suggest some solution for this.
thanks and regards
murugesan

Dear,
Please refer these threads,
Dynamic Modification Rule In Quality Module
Re: Dynamic modification rule
Regards,
R.Brahmankar

PP & QM config Tcodes

hi SAP gurus.. can u send me the SAP PP and QM configuration Tcodes.
nithya

Dear Nithyaseelan,
Please find list of PP & QM codes
PP
MATERIAL
CREATE-GENERAL MM01 IMMEDIETELY
 MM11 SCHEDULE
CHANGE MM02 IMMEDIETELY
 MM12 SCHEDULE
 MM13 ACTIVATE
FLAG FOR DELETION MM06 IMMEDIETELY
 MM16 SCHEDULE
DISPLAY MM03 DISPLAY CURRENT
 MM19 DISPLAY AT KEY DATE
DISPLAY CHANGES MM04 ACTIVE CHANGES
 MM14 SCHEDULE CHANGES
 MM17 MASS MAINTENANCE
 MMAM CHANGE MATERIAL TYPE
OTHER MMBE STOCK OVERVIEW
 MMPV CLOSE PERIOD
 MMRV ALLOW POSTING TO
 PREVIOUS PERIOD
 MM50 INSTANT MATERIAL VIEW
 MMSC ENTER STORAGE LOCATIONS
 MM60 MATERIAL LIST
ARCHIVING(MATERIAL) MM71 ARCHIVE/DELETE
 MM72 DISPLAY ARCHIVE
BILL OF MATERIAL (MATERIAL BOM)
 CS01 CREATE
 CS02 CHANGE
 CS03 DISPLAY
EXTRAS CS28 ARCHIVING
 CS20 MASS CHANGES
EVALUATION/BOM CS11 BOM MULTILEVEL
EXPLOSION/MATERIAL CS12 STRUCTURE MULTILEVEL
BOM CS13 SUMMURISED BOM
WORK CENTRES
 CR01 CREATE
 CR02 CHANGE
 CR03 DISPLAY
 CA85 REPLACE
CAPACITY CR11 CREATE
 CR12 CHANGE
 CR13 DISPLAY
HIERARCHY CR21 CREATE
 CR22 CHANGE
 CR23 DISPLAY
LINE HIERARCHY LDB1 CREATE
 LDB2 CHANGE
 LDB3 DISPLAY
REPORTING CR60 W/C INFORMATION SYSTEM
 CR05 W/C LIST
 CR06 COST CENTRE ASSIGNMENT
 CR07 W/C CAPACITIES
 CR08 W/C HIERARCHY
WHERE USED CA80 WORK CENTRE
 CR15 CAPACITY
 CR10 CHANGE DOCUMENTS
EXTRAS CR09 STD. TEXTS TASK LIST
 CR41 ARCHIVING
ROUTING
STAD. ROUTING CA01 CREATE
 CA02 CHANGE
 CA03 DISPLAY
REF. OPERATION SETS CA11 CREATE
 CA12 CHANGE
 CA13 DISPLAY
RATE ROUTING CA21 CREATE
 CA22 CHANGE
 CA23 DISPLAY
REF. RATE ROUTING CA31 CREATE
 CA32 CHANGE
 CA33 DISPLAY
EXTRAS CA85 REPLACE W/C
MASS CHANGES CA95 REPLACE REF. OP. SET
 CA75 REPLACE PRT
DELETE TASK LIST CA99 WITH ARCHIVING
 CA98 W/O ARCHIVING
REPORTING CA80 WORK CENTRE
WHERE USED LIST CA90 REF. OP. SETS
 CA70 PRODUCTION RESORCE TOOLS
COST CENTRE
 OKKP MAINTAIN CONTROLLING AREA
 KS01 CREATE COST CENTRE
 KZS2 CREATE COSTING SHEET
 KA01 CREATE PRI. COST ELEMENT
 KA06 CREATE SEC. COST ELEMENT
 KL01 CREATE ACTIVITY TYPE
 KP26 ACTIVITY TYPE/PRICE PLANNING
SALES AND OPERATIONS PLANNING
PRODUCT GROUP MC84 CREATE
 MC86 CHANGE
 MC85 DISPLAY
GRAPHIC MC91 PRODUCT GROUP
 MC92 OVERVIEW
PLANNING MC81 CREATE
FOR PRODUCT GROUP MC82 CHANGE
 MC83 DISPLAY
 MC75 TRANSFER PG TO PLANNING
FOR MATERIAL MC87 CREATE
 MC88 CHANGE
 MC89 DISPLAY
 MC74 TRANSFER MATERIALS TO DM
 MC9K MATERIAL AVAILABILITY
VERSION MANAGEMENT MC78 COPY
 MC80 DELETE
FLEXIBLE PLANNING MC93 CREATE
PLANNING MC94 CHANGE
 MC95 DISPLAY
 MC9K MATERIAL AVAILABILITY
TOOLS/PLANNING TYPE MC8A CREATE
MACRO MC8B CHANGE
 MC8C DISPLAY
EVENT MC64 CREATE
 MC65 CHANGE
 MC66 DISPLAY
ROUGH CUT PLANNING MC35 CREATE
PROFILE MC36 CHANGE
 MC37 DISPLAY
ENVIRONMENT MC90 TRANSFER MATERIALS TO DM
ACTIVITY REQT. KSPP TRANSFER TO COST CENTRE
 KSBL COST CENTRE OLANNING REPORT
 KSOP TRANSFER TO ACTIVITY BASED COSTING
 CPBL PLANNING REPORT PROCESSES
 MC9C REPORTING
SETTINGS MC96 FORECAST PROFILE
DISSAGGRIGATION MC76 BREAKDOWN PG PLAN
 MC77 DISPLAY PG PLAN
 MC75 TRANSFER PG TO PLANNING
 MC74 TRANSFER MATERIALS TO DM
FORECASTING
INDIVIDUAL FORECAST MP30 EXECUTE
 MP31 CHANGE
 MP32 DISPLAY
TOTAL FORECAST MP38 EXECUTE
 MP33 REPROCESS
 MP39 PRINT
 MPBT EXECUTE BACKGROUND
 MPDR PRINT BACKGROUND
DEMAND MANAGEMENT
PIR MD61 CREATE
 MD62 CHANGE
 MD63 DISPLAY
 MD65 REQTS. FOR SCINARIO
 MD66 COPY SIMULATED DEPENDENT REQT.
 MD70 COPY TOTAL FORE CAST
EVALUATION MD73 DISPLAY TOTAL REQT.
 MD79 EXCELL INTERFACE
 MD4C ORDER REPORT
 MD72 CHARECTERISTICS PLANNING
CUSTOMER REQT. MD81 CREATE
 MD82 CHANGE
 MD83 DISPLAY
REPETITIVE MANUFACTURING
MASTER DATA C223 PRODUCTION VERTION
PRODUCT COST PLANNING
COSTING RUN CKMATSEL CREATE
SELECTION LIST CKMATCON Edit
 CK40N EDIT COSTING RUN
Material Requirement Planning
Menu Nodes TransactionActivity
Master Data MD25 Create planning calendar
 MD26 Change planning calendar
 MD27 Display planning calendar
 MDSA Display BOM explosion number
 MDSP Edit BOM explosion number
 MEQ1 Maintain quota file
 OPPP Explode BOM by date
 MDUS Display project assignment
 MDUP Process project assignment
 MDL1 Create production lot
 MDL2 Change production lot
 MDL3 Display production lot
Planning MD20 Create planning file entry
 MD21 Display planning file entry
 MDAB Set up planning file entry in background
 MDRE Check planning file entry
 MD01 Total planning online
 MDBT Total planning in background
 MD03 Single-item, single-level planning
 MD02 Single-item, multi-level planning
 MD43 Interactive single-item planning
 MD50 Multi-level, make-to-order planning
 MD51 Multi-level project planning
 MF52 Display planning table
 MF50 Change planning table
 MF57 Planning table by MRP lists
 MF51 Planning table by production list
Evaluations MD04 Stock/requirements list
 MD07 Collective access of stock/requirements lis
 MD05 MRP list
 MD06 Collective access of MRP lists
 MDLD Print MRP list
 MD45 Planning result
 MD46 Collective access of planning result
 MD44 Planning situation for a material
 MD47 Planning situation for a product group
 MD48 Cross-plant planning situation
 MD4C Order report
 MD09 Pegged requirements
 CO46 Order progress
Planned Order MD11 Create planned order
 MD12 Change planned order
 MD13 Individual access of planned order
 MD16 Collective access of planned orders
 MD14 Individual conversion of planned order into
 MD15 Collective conversion of planned orders int
 MDUM Convert planned order into purchase requisi
 CO40 Convert individual planned order into produ
 CO41 Collective conversion of planned orders int
 CO48 Partial conversion of planned order into pr
 COR7 Individual conversion of planned order into
 COR7_PC Collective conversion of planned orders int
 COR8 Partial conversion of planned order into pr
 MDVP Collective availability check
 MDAC Execute action for planned order
LONG TERM PLANNING
PALNNING SCENARIO MS31 CREATE
 MS32 CHANGE
 MS33 DISPLAY
PLANNING RUN MS01 ON LINE
 MSBT SA BACKGROUND JOB
 MS02 SINGLE ITEM - MULTI LEVEL
 MS03 SINGLE ITEM - SINGLE LEVEL
 MS50 SINGLE ITEM - SALES ORDER
 MS51 SINGLE ITEM PLANNING, PROJECT
 MFSO PLANNING TABLE
EVALUTIONS MS05 MRP LIST MATERIAL
 MS06 MRP LIST COLLECTIVE DISPLAY
 MSLD PRINT MRP LIST
 MS04 STOCK/REQUIREMENTS LIST
 MS07 STOCK/REQUIREMENT LIST COLLECTIVE DISPLAY
 MS44 PLANNING SITUATION MATERIAL
 MS47 SITUATION PRODUCT GROUP
MPS-MASTER SCHEDULE ITEMS
TOTAL PLANNING MD40 ON LINE
 MDBS SA BACKGROUND JOB
 MD41 SINGLE ITEM - MULTI LEVEL
 MD42 SINGLE ITEM - SINGLE LEVEL
 MD43 SINGLE ITEM - INTERACTIVE
 MD50 SINGLE ITEM - SALES ORDER
 MD51 SINGLE ITEM PLANNING, PROJECT
EVALUTION IS SIMILAR TO MRP
PRODUCTION CONTROL
ORDER - CREATE CO01 WITH MATERIAL
 CO07 WITHOUT MATERIAL
 CO40 FROM PLANNED ORDER
 CO41 COLLECTIVE CONVERTION OF PLANNED ORDER
 CO08 FOR SALES ORDER
 CO10 FOR PROJECT
 CO02 CHANGE
 CO03 DISPLAY
CONTROL MD04 STOCK/REQUIREMENTS LIST
 COHV MASS PROCESSING
 COMAC COLLECTIVE AVAILABILITY CHECK
 CO05N COLLECTIVE RELEASE
 CO04N PRINT
 CO09 AVAILABILITY OVER VIEW
GOODS MOVEMENT MF65 STOCK TRANSFER FOR RESERVATION
MATERIAL STAGING MF68 LOG
 MB1A GOODS ISSUE
 MB31 GOODS RECEIPT
 COWBPACK PACK MATERIAL
CONFIRMATION CO1V TIME TICKET
FOR OPERATION CO14 DISPLAY
 CO13 CANCEL
 CO1L REQUESTED CONFIRMATIONS
 CO1P PREDEFINED PROCESSES
TOOLS-ARCHIVING CO78 ORDER
 KOAA SETTELMENT DOCUMENTS
CAPACITY PLANNING
EVALUTION CM01 LOAD
WORK CENTER VIEW CM02 ORDERS
 CM03 POOL
 CM04 BACKLOG
 CM05 OVERLOAD
 CM07 VARIABLE
EXTENDED EVALUTION CM50 WORK CENTER VIEW
 CM51 INDIVIDUAL CAPACITY VIEW
 CM52 ORDER VIEW
LEVELLING CM21 PLANNING TABLE (GRAPHICAL)
WORK CENTER VIEW CM22 PLANNING TABLE (TABULAR)
INDIVIDUAL CAPACITY VCM27 PLANNING TABLE (GRAPHICAL)
 CM28 PLANNING TABLE (TABULAR)
ORDER VIEW CM31 PLANNING TABLE (GRAPHICAL)
 CM32 PLANNING TABLE (TABULAR)
AVAILABLE CAPACITY CR12 CHANGE
CAPACITY CR13 DISPLAY
 OP4A SHIFT SEQUENCE
 OP43 FACTORY CALENDER
QM
Q000 Quality management
QA00 Quality inspection
QA01 Create Inspection Lot
QA01A Create Inspection Lot
QA02 Change Inspection Lot
QA02A Change Inspection Lot
QA03 Display inspection lot
QA05 Job planning: Periodic inspection
QA06 Job overview: Periodic inspection
QA07 Trigger for recurring inspection
QA07L Deadline Monitoring Log
QA08 Collective Processing of Insp. Setup
QA09 No. range maintenance for insp.lots
QA10 Trigger automatic usage decision
QA10L Log for Automatic Usage Decision
QA11 Record usage decision
QA12 Change usage decision with history
QA13 Display usage decision
QA14 Change UD without history
QA16 Collective UD for accepted lots
QA17 Job planning for auto usage decision
QA18 Job overview for auto usage decision
QA19 Automatic usage decision
QA22 Change inspection point quantities
QA23 Display insp.point quantities
QA32 Change data for inspection lot
QA32WP QA32 -Call from Workplace/MiniApp
QA33 Display data for inspection lot
QA40 Auto. Usage Decision for Production
QA40L Log for Automatic Usage Decision
QA41 Scheduling UD for Production Lots
QA42 Job planning: UD prod. insp.lots
QA51 Scheduling Source Inspections
QA52 Source inspections: Job overview
QAC1 Change insp. lot actual quantity
QAC2 Transfer stock to insp. lot
QAC3 Reset sample
QAER Display archive objects
QAS1 Download Insp. Specs. (Obsolete)
QAS2 Download Basic Data (Obsolete)
QAS3 Upload Results (Obsolete)
QAS4 Upload UD (Obsolete)
QC01 Create certificate profile
QC02 Change certificate profile
QC03 Display certificate profile
QC06 Immediate delete of cert. profiles
QC11 Create cert. profile assignment
QC12 Change cert. profile assignment
QC13 Display cert. profile assignment
QC14 Create cert.prof.assign.w/copy model
QC15 Create cert. profile assignment
QC16 Change cert. profile assignment
QC17 Display cert. profile assignment
QC18 Create cert.prof.assign.w/copy model
QC20 Certificates for Deliveries
QC21 Quality certificate for the insp.lot
QC22 Quality Certificate for Batch
QC31 Archive display: Delivery item
QC32 Archive display: Inspection lot
QC40 Internet Certificate for Delivery
QC40A Internet Certificate for Delivery
QC42 Batch certificate on WWW
QC51 Create certificate in procurement
QC52 Change certificate in procurement
QC53 Display certificate in procurement
QC55 Worklist: Certificates - Procurement
QCC0 QM: Direct Access to IMG
QCC1 Direct Access to IMG: Notification
QCC2 IMG Direct Access: QM Q-Notification
QCC3 IMG Direct Access: QM Q-Inspection
QCC4 IMG Direct Access: QM Q-Planning
QCC5 IMG Direct Selection: QM Bus. Add-In
QCC_STABI Copy Stability Study Customizing
QCC_STABI_NK Copy Stability Study Number Ranges
QCCC QM standard settings complete
QCCF QM standard forms
QCCK QM standard settings: Catalogs
QCCM QM std. settings: Qual. notifs.
QCCN QM standard number ranges
QCCP QM std. settings: Quality planning
QCCS QM sampling schemes
QCCT QM standard texts
QCCU QM standard settings: Environment
QCCW QM std. settings: Quality inspection
QCCY Transport QM tolerance key
QCCZ QM std. settings: Qual. certificates
QCE2 Edit Communication Support
QCE3 Display Communication Support
QCYF QM standard forms (general)
QCYT QM standard texts (general)
QD21 Mark completed notifications
QD22 Archiving Notifications: Archive
QD24 Archiving Notifications: Delete
QD25 Archiving Notifications: Admin.
QD33 Delete quality level
QD34 Delete quality level planning
QD35 Delete job overview for Q-levels
QDA1 Edit sampling type
QDA3 Display sampling type
QDB1 Maintain allowed relationships
QDB3 Display allowed relationships
QDH1 Q-level evaluation: Change data
QDH2 Q-level evaluation: Display data
QDL1 Create quality level
QDL2 Change quality level
QDL3 Display quality level
QDM1 Edit valuation mode
QDM3 Display valuation mode
QDP1 Create sampling scheme
QDP2 Change sampling scheme
QDP3 Display sampling scheme
QDR1 Create dynamic modification rule
QDR2 Change dynamic modification rule
QDR3 Display dynamic modification rule
QDR6 Disp. where-used list-dyn. mod. rule
QDR7 Replace dynamic mod. rule used
QDV1 Create sampling procedure
QDV2 Change sampling procedure
QDV3 Display sampling procedure
QDV6 Uses: Sampling procedures
QDV7 Replace sampling procedure used
QE00 Quality Planning
QE01 Record characteristic results
QE02 Change characteristic results
QE03 Display characteristic results
QE04 Record sample results
QE05 Change sample results
QE06 Display sample results
QE09 Indiv.display of charac.result
QE09WP Call QE09 from Workplace
QE11 Record results for inspection point
QE12 Change results for inspection point
QE13 Display results for inspection point
QE14 Record results for delivery note
QE15 Change results for delivery note
QE16 Display results for delivery note
QE17 Record results for equipment
QE18 Change results for equipment
QE19 Display results for equipment
QE20 Record results for funct. location
QE21 Change results for funct. location
QE22 Display results for funct. location
QE23 Record results for phys. sample
QE24 Change results for phys. sample
QE25 Display results for phys. sample
QE29 No. Range Maint.: Conf. No. for Char
QE51 Results recording worklist
QE51N Results Recording Worklist
QE52 Worklist: Results for phys. sample
QE53 Worklist: Record results for equip.
QE54 Worklist: Results for funct. loctns
QE71 Tabular res. recording for insp. pts
QE72 Tabular Results Rec. for Insp. Lots
QE73 Tabular res. recording for characs.
QEH1 Worklist for Mobile Results Rec.
QEI1 Displaying QM Interfaces Appl. Log
QEI2 Deleting QM Interfaces Appl. Log
QEW01 Results Recording on Web
QEW01V Variant Maint.: Recording on Web
QF01 Record defect data
QF02 Change defect data
QF03 Display defect data
QF11 Record defects for inspection lot
QF21 Record defects for operation
QF31 Record defects for characteristic
QG09 Maint. num. range Q control charts
QGA1 Display quality score time line
QGA2 Display inspection results
QGA3 Print inspection results
QGC1 Qual. control charts for insp. lots
QGC2 Control charts for task list charac.
QGC3 Control charts for master insp. char
QGD1 Test Equipment Usage List
QGD2 Test Equipment Tracking
QGP1 Results history for task list charac
QGP2 Results History for Task List Charac
QI01 Create quality info. - purchasing
QI02 Change qual.information - purchasing
QI03 Display quality info. - purchasing
QI04 Job planning for QM procurement keys
QI05 Mass maintenance QM procurement keys
QI06 QM Releases: Mass maintenance
QI07 Incoming insp. and open pur. orders
QI08 Job overview of QM procurement keys
QISR Internal Service Request
QISR1 Internal Service Request - Forms
QISR_PCR60 vc_scenario for Message type 60(PCR)
QISR_SM29 ISR Customizing: Table Transfer
QISR_SR12_START Suggestion System
QISRSCENARIO Customizing Szenario
QISRTRANSPORT ISR Customizing Transport
QISRW Internal Service Request on the Web
QK01 Assign QM order to material
QK02 Display assigned QM orders
QK03 Maintain specs. for order type
QK04 Create QM order
QK05 Confirmed activities for insp. lot
QL11 Mat: Distribute Inspection Setup-ALE
QL21 Master Inspection Characs (ALE)
QL31 Distribute Inspection Methods (ALE)
QL41 Distribute Code Groups (ALE)
QM00 Quality Notifications
QM01 Create quality notification
QM02 Change quality notification
QM03 Display quality notification
QM10 Change list of quality notifications
QM10WP QM10 - Call from Workplace/MiniApp
QM11 Display List of Qual. Notifications
QM12 Change list of tasks
QM13 Display list of tasks
QM13WP QM13 - Call from Workplace/MiniApp
QM14 Change list of items
QM15 Display list of items
QM16 Change activity list
QM17 Display activity list
QM19 List of Q Notifications, Multi-Level
QM50 Time line display Q notifications
QMW1 Create quality notification (WWW)
QP01 Create
QP02 Change
QP03 Display
QP05 Print inspection plan
QP06 List: Missing/unusable insp. plans
QP07 List: Missing/Unusable GR InspPlans
QP08 Print task lists for material
QP11 Create reference operation set
QP12 Change reference operation set
QP13 Display reference operation set
QP48 Number Ranges for Physical Samples
QP49 Number range for phys. samp. drawing
QP60 Time-related development of plans
QP61 Display change documents insp.plan
QP62 Change documents ref.operation sets
QPIQS8 QM MiniApp Selection Variant
QPIQS9 QM MiniApp Selection Variant
QPNQ Number ranges for inspection plans
QPQA32 QM MiniApp Selection Variant
QPQGC1 QM MiniApp Selection Variant
QPQM10 QM MiniApp Selection Variant
QPQM13 QM MiniApp Selection Variant
QPR1 Create physical sample
QPR2 Change physical sample
QPR3 Display physical sample
QPR4 Confirm physical sample drawing
QPR5 Manual inspection lots for physSamps
QPR6 Create new phys.-samp. drawing w.ref
QPR7 Storage Data Maintenance
QPV2 Maintain sample drawing procedure
QPV3 Display sample drawing procedure
QS21 Create master insp. characteristic
QS22 Create master insp. charac. version
QS23 Change master insp. charac. version
QS24 Display master insp. charac. version
QS25 Delete master insp. charac. version
QS26 Display characteristic use
QS27 Replace master insp. characteristic
QS28 Display insp. charac. list
QS29 Maintain characteristic number range
QS31 Create inspection method
QS32 Create inspection method version
QS33 Change inspection method version
QS34 Display inspection method version
QS35 Delete inspection method version
QS36 Display inspection method use
QS37 Central replacement of methods
QS38 Display inspection method list
QS39 Maintain method number range
QS41 Maintain catalog
QS42 Display catalog
QS43 Maintain catalog
QS44 Maintain catalog
QS45 Display catalog
QS46 Display code group use
QS47 Central replacement of code groups
QS48 Usage indicator - code groups
QS49 Display code groups and codes
QS4A Display catalog
QS51 Edit Selected Sets
QS52 Display selected set index
QS53 Maintain individual selected set
QS54 Maintain selected set
QS55 Display selected set
QS58 Usage indicator - selected sets
QS59 Display selected sets
QS61 Maintain material specification
QS62 Display material specification
QS63 Maintain material spec: Planning
QS64 Display material spec: For key date
QS65 Activate material specification
QS66 Plan activation of material spec.
QS67 Job overview: Activate mat. spec.
QSR5 Archive inspection plans
QSR6 Delete routings
QST01 Create Stability Study
QST03 Display Stability History
QST04 Display Inspection Plans
QST05 Graphical Scheduling Overview
QST06 Scheduling Overview (StabilityStudy)
QST07 Change Testing Schedule Items
QST08 Display Testing Schedule Items
QSUB Define subsystems
QT00 Test Equipment Management
QT01 Test equipment management
QTSA Product Allocations: Send Quantities
QTSP Product Allocations:Send Customizing
QUERY_BP_FSBPBILDER BP: Screen Customizing for Query
QV01 Create quality assurance agreement
QV02 Change quality assurance agreement
QV03 Display quality assurance agreement
QV04 Find Quality Assurance Agreement
QV11 Create technical delivery terms
QV12 Change technical delivery terms
QV13 Display technical delivery terms
QV14 Search technical terms of delivery
QV21 Create QA agreement (DocType Q03)
QV22 Change Q-agreement (doc. type Q03)
QV23 Display Q-agreement (doc. type Q03)
QV24 Find Q-agreement (doc. type Q03)
QV31 Create Q-spec. (doc.type Q04)
QV32 Change Q-specification (docType Q04)
QV33 Displ. Q-specification (docType Q04)
QV34 Find Q-specification (doc. type Q04)
QV51 Create control for QM in SD
QV52 Change control for QM in SD
QV53 Display control for QM in SD
QVM1 Inspection lots without completion
QVM2 Inspection lots with open quantities
QVM3 Lots without usage decision
QZ00 Quality Certificates
If usefule , please reward points.

QDL3 QM

Similar Messages

Maybe you are looking for