QI lot during Storage loc transfer

Dear all,
We are facing one problem. We want to activate quality inspection while transfering material from one storage location to other. In receing storage location the material should go to QI stock. Usage decision needs to be taken in receiving storage location.
Can the process be mapped in standard SAP?
Regards

Hi,
Refer Page no 43 , "Inspection for stock transfer" in the enclosed link for the complete details.
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/QMIMIL/QMIMIL.pdf
Regards
K.M.Arun.

Similar Messages

Storage loc to Storage loc transfer thru STO

I have seen something for storage location to storage location transfer through STO in IMG but not getting how to use that.Anybody have any idea about this how to use or work?
Thanks in advance..

Hi neetu,
The tag for activate STO for storage locaton to storage location in MM is for using a Storage location as the supplier ,as of in standard SAP we use Plant as supplier for STO's not storage location's directly in the vendor field at the time of STO.
its already mentioned in notes you can check that also. and main thing this is not active in Standard system as it may cause some undefined problems in systems.
Better go ahead with the Standard process.
Regards,
Ninad Kshirsagar

WM- WM stock (quality) to not activated storage loc-Transfer Posting issue

hi friends
I Have a error during transfer posting (321 mov type). After quality inspection the stock is rejected . so i have to move to WM not
activated Storage location. After transfer posting, TR is generated From material document. then iam trying to create to transfer order , but i have the error
System cannot find source storage bin
Message no. L3 008
Diagnosis
The system was not able to determine a source storage bin for this material.
This problem can be caused for several reasons:
1. The material no longer exists in your warehouse.
2. The material is in your warehouse, but currently cannot be reached by the system (for example, the material is just being transferred by one of the conveyor machines).
3. The material is in your warehouse, but not in the storage type and storage areas that are defined in your system for the material search.
Procedure
Check to see if the material really exists in your warehouse.
If the reason for the error is the third one mentioned above, contact your system administrator
Our bussiness is
lXRM storage location is WM activated
lXA   storage location is not WM activated
1. create PO
2.GRN- Quality Inspection
3 If ok Means Stock is move to lXRM
    If not ok Means Stock is move to lXA.
my queries is i want to move quality stock (WM) to not activated storage location.
with regards
dinesh

hi friends
                 thanks for response,
1. create PO
2.GRN- Quality Inspection,* Initially i GRN receipt LXRA Storage location
3 If ok Means Good Stock is move to lXRM. (storage location)
If not ok Means Bad Stock is move to lXA.(storage location)
we have not quality module, once do the Migo the manually the assign quality inspection(STOCK TYPE). After quality inspection
done, Then do the 321 mov type user should decide some good quantity move to unrestricted stock LXRM (Storage
location) ,some bad quantity move to the scrap storage location (lXA) .
*STORAGE LOCATION LXA is not activated WM
My request is, i want to move to the Scrap location (LXA). after 321 movement type done, TR is generated then i am trying to do the transfer order . system is not accepted , iam getting error
wiht regards
dinesh
Edited by: code acess on Aug 27, 2011 4:45 AM
Edited by: code acess on Aug 27, 2011 4:46 AM

Automatic Inspection Lot Creation for HUs (storage Loc.) in WHS

Hi All,
can someone guide me through customizing/with end result expected from client. How can I setup this configuration.
The requirement is all Chem.Raw Materilas are subject to Quality inspection with HU managed storage Loc. with WMS.
Good Receipt is posted Via Vl31n into Quality Stock. Subsequently a Transfer Order will be created & confirmed to transfer of materials from 902 interim storage type to destination storage type and bin. (due to lack of space in the Whse).
Now expected is that when Usage decision made (Quality Managment) the stock type should change from Q to Unresticted within the same bin and same storage type and material should be made available to issue for orders.
Also when GR is done 101 mvt. an inspection lot should generate automatically in Whse under the quant.
Most appreciate your help.
Regards
Chandra

Hi Chandra,
Generally WM movement type '309' is assigned for posting change (Sap standard setting). This movement type is generally assigned against 321 IM movement type.
Modify the settings for WM movement type '309' as below:
Path: LE -> WM -> Activities -> Transfers -> Define Movement types
- Automatic TO X (activate)
- Activate 'To item can be confirmed immediately'
- Activate 'propose confirmation'
- Activate 'post to same bin'
This should solve your problem.
On your other question
Generally the inspection lot is assosiated with the WM
stock and Quant if the stock Quality stock is posted to bins directly.
Please display the Quant using LS23 and let me know your findings.
Regards
Madhu

QM - restrict lot creation in I. Type(08) for S Loc to S Loc transfer

Hi All,
Thanks in advance for reply.
We have requirement for restriction in creation of Inspection Lots using inspection type u2013 08, while stock transfer from storage location to storage location only.
Inspection type 08 is used for stock transfers thourghout various plants.
But in one of the plant, there is internal stock movement from one storage location to another. During this posting system is creating inspection lot(origin 08), which is not required.
Our location is WM and HUM managed.
Please let me know how can I restrict creation if Inspection lot in above case.
Best regards,
Ravi

Hi,
Actually we need QM activate for 311 movement type.
We have two scenario in same plant & same material.
1) Storage Location to storage location transfer(HUM managed location)
2) Plant to Plant transfer(without HUM managed location)
In material let say A, I have maintain insp type 08 & in insp type details i have activated isp with HU. Hence when I do the location to location tansfer,system is creating Inspection lot for 08 with handling unit.
But when I transfer the same material from one plant to other,system is not creating lot as this transfer is not with handling unit.
For this I have created one more insp type Z1 & attach to insp lot origin 08 but still insp lot is not created while plant to plant transfer.
Pls suggest.
Thanks,
Ritesh/Ravi.

During GR against Process Order Storage loc. not appearing

He Experts,
I am trying to do goods receipt against process order for bulk material using MIGO.
But under where tab in MIGO storage loc field is not appearing. For this material production storage location is maintained in MRP2 view & in material type customizing both quantity & value field is selected for a given plant.
Can you please explain why this field is not appearing? Is there any other customizing behind this? During migo 101 movement type (GR for acct. assgt.) is appearing in moveent type field.
Thanks in advance,
Vijay.

Hi,
OK,You are trying to do GR for a materisl which is defined as Bulk Material (Can be done in BOM or Material master).
You said , there is no stock appearing for this material in this Storage location.
Check one thing,
go to MMSC and find out whether the storage location is maintained for the material or not?
if your Storage location is not appearing in the list, maintain it there.
Create a new Process order/productrion order and check
Regards
Ratan

Material Transfer from Storage Location 2 Storage loc

Hi Gurus,
Here Client want to transfer Material from 1 loc to another. Std T Code is MB1B with Mov Type 309. But here we have to enter material, qty,& batch no.But client's requirement is that he dont want to enter all these things.He want to select the material,batches collectively sothat seperate entry should be minimised. Is there any functionality through which we can transfer the selected materials?
Please reply soon its urgent.
Regards,
Mayur

Hi mayur
First of all 309 movement is ussed for Material to material transfer
like our friend said for storage loc to storage loc. you need to use 311
Now when you go to MB1B then goto Edit in that you can see default value
enter your default value , so after that you need to choose only material and batch
collectively
Thanks
Bala

Error during creation of transfer orders for material

Hi,
We are doing a transfer of stock from one storage with WM to a storage without WM.
But system does not finish the process automatically displaing the following error message:
"Error during creation of transfer orders for material document 49000XXXX"
System cannot find source storage bin
Thanks in advance for the help
Regard
Enzo

your picking strategy does not find the bin where the material is.
So you need to check what value you have entered for picking in WM view of material master.
then you have to check where your material is (storage type and bin)
then you need to check customizing to where what storage types are included in the picking strategy that is tight to the material master entry.

WM: Error occurred during storage section search (FGWM05 001)

HI friends
              i done GRN 101(movement type) with mb31 for production order ..based on TR Iam trying to create transfer order i have
the below error. where i missed the configuration
"Error occurred during storage section search (FGWM05 001)"
    Message no. L3 041
Diagnosis
    No storage area search has been defined for this material and this
    storage type.
Procedure
    Contact your system administrator! Note down the material and the
    storage type listed within parentheses in the error message.
with regards
dinesh
Edited by: code acess on Jun 28, 2011 8:30 AM

Hi
In WM customizing Please check for your warehouse/Storage type combnation the storage section search is on and valid.
IMG>Logistics Execution>WM>Strategies>Storage section search
if there is no entry then maintain it. The nest error may be storage bin. Make sure that you create storage bin for whsno/storage type/storage section combination by using LS10 or LS01N)
Hope it helps
Karthik

Storage bin transfer

Hello
In a WM managed Storage loc, I did 309 from A to B which have different st bins X & Y resp.But the system did transfer to mat B in st bin X
But I want to transfer it to Y
Do I have to do st bin transfer also? How?
Thanks & regards
Dinesh

Hi Dinesh,
309 Mvt refers to Material to Material Transfer, right. Also, at WM level these transfers (Unrestricted to Blocked, QI to Unrestricted) are managed as Posting Changes (No physical movement of Goods, Goods will be there in the same bin).
Thanks & Regards,
Ramkumar

Sale Order change BAPI - Storage loc not updated

Hi Everybody,
Iam using "BAPI_SALESORDER_CHANGE", to change the sale order items.
First iam calling above bapi with switch B, for new pricing & then second time for material change.
When i change any material number, it is getting updated correctly.
But the storage location, even though iam passing in the bapi it is not updated, & is blank - updation flag is also passed.
When i execute sale order change again it is updated - ie, for any material change for first bapi call, storage loc is not updated - for 2nd bapi call storage loc is updation - for same input in both the cases.
Is there any way to update the storage loc is first call of sales order change bapi.
Below is the parameters iam passing in bapi :
CALL FUNCTION 'BAPI_SALESORDER_CHANGE'
    EXPORTING
      SALESDOCUMENT      = LS_SALESDOCUMENT
      ORDER_HEADER_IN    = LT_HEADER_IN
      ORDER_HEADER_INX   = LT_HEADER_X
    TABLES
      RETURN                            = LT_RETURN
      ORDER_ITEM_IN               = LT_ITEMS
      ORDER_ITEM_INX             = LT_ITEM_X
      ORDER_CFGS_REF          = LT_CFGS_REF
      ORDER_CFGS_INST         = LT_PARTS
      ORDER_CFGS_VALUE     = LT_VALUES
      ORDER_CFGS_BLOB        = LT_CUBLOB
      ORDER_CFGS_VK            = LT_CUVK
      ORDER_CFGS_REFINST   = LT_CUREF
      SCHEDULE_LINES            = LT_SCHEDULE_L
      SCHEDULE_LINESX         = LT_SCHEDULE_X
      ORDER_TEXT                   = LT_TEXT
      CONDITIONS_IN                = LT_CONDITION_L
      CONDITIONS_INX              = LT_CONDITION_X.
Any help is appreciated.
Regards,
Nagarajan.J

Hi,
Storage location is updated only when same sale order bapi is called another time with required details.
rgs,
Nagarajan J

How do I get my music onto icloud from my ipad? I can see i have plenty of icloud storage but can't get my music to store on icloud hence taking up lots of storage on my ipad

How do I get my music onto icloud from my ipad? I can see i have plenty of icloud storage but can't get my music to store on icloud hence taking up lots of storage on my ipad

If you want to be able to access your entire music library from iCloud, you'll have to subscribe to iTunes Match (http://www.apple.com/itunes/itunes-match/). Music purchased from the iTunes store is already in iCloud as it can be redownloaded at any time (see http://support.apple.com/kb/ht2519).

Error during creation of transfer orders for mateRIA

hi gurus,
I am getting an error while moving material from sl0c2 to sloc1 which is connected to wh by mvmt 321. the document is getting posted and the stock is coming to sloc1,but the error is
"Error during creation of transfer orders for mateRIAL.how to correct the error.
regards
murugan

Hi,
The material is maintained at the Warehouse level, hence warehouse transactions have to be completed, by creating a transfer order and the confirmation of the same will create a transfer posting from SL1 to SL2 in the system. This is trigerred automatically depending on the sytem configuration.
Regards,
raghu

What is the use of Storage loc.ref.in LE-WM Interface to Inventory Managemt

Hi Guys
What is the use of below fields
Special movement indicator for warehouse management and Storage loc. ref.
In the WM configaration LE-WM Interface to Inventory Management
How we can do the below scenario with this configaration
I have 3 scenarios all scenarios have MIGO and placing stock to WM
2 scenarios requres Immediate TO creation after MIGO 101 mvt type
But last scenario does not want Immediate TO ,it is having another Z transaction to create TO
But problem is for the last scenario also creating Immdiate TO after MIGI 101
How to avoid this Immdiate TO for this scenario
And How to allow it for first 2 scenarios
How we can to with that configaration

Hello ,
It is not possible directly in customising as all three cases are using the same Mvt Type.
Alternate Solution :
You may try an by creating a new Mvt Type 901 i.e making a copy of 101.
Thereafter try to link a new Ref Mvt Type to the same .You should use this case for the third scenario.
This may resolve your problem.
Regards
Ramesh Ch

HELP! Does anyone know a Data Recovery Expert for I-CIoud? -My calender disappeared during I-Cloud transfer of data from old I-Phone 4 to new I-Phone 5s. It was on both I-Phones then vanished. (It was evidently not syncing during back-ups on the laptop)

HELP! Does anyone know a "Data Recovery Expert" for I-Cloud & I-Phone? - My calender disappeared during I-Cloud transfer of data from my old I-Phone 4 to my new I-Phone 5s. It was on both I-Phones then vanished. (It was evidently not syncing during back-ups on the laptop)

HELP! Does anyone know a "Data Recovery Expert" for I-Cloud & I-Phone? - My calendar disappeared during I-Cloud transfer of data from my old I-Phone 4 to my new I-Phone 5s. It was on both I-Phones then vanished. (It was evidently not syncing during back-ups on the laptop)
The Apple techs are looking. But they can't find it. Nor can they find a back up on my laptop, Evidently when I backed up my Iphone to computer the calendar wasn't syncing. Since I only use the calander on my phone - I never noticed.
The Apple store rep that sold me the I-Phone 5 on Monday, was transferring my contacts and calendar thru I-Cloud (I never used I-Cloud before that moment - and always had it turned off). He successfully transferred the contacts - which are still on my phone), but the Calendar weirdly split into 6 calendars (2 of which were linked to my G-Mail which only had a few entries) (4 were linked to my MSN / Hotmail email and contained all the major events/data). I never created calendars that were separate or liked them to 2 different emails. I just typed entries into the I-Phone calendar. However, the calendar did exist on the new I-Phone for 24 hours. Something happened during transfer. When the Apple Genius Bar tech was attempting to back up my Calendar & merge the 6 calendars, everything disappeared in his hand while he was looking at it.
I am hoping that some really good data recovery expert exists that can restore the calendar that was in both I-Phones yesterday. It is completely devastating if I can't recover it.
Any help, or referrals, is great appreciated!!!!
Thanks!

QI lot during Storage loc transfer

Similar Messages

Maybe you are looking for