QI stock
Dear All,
Here is a problem,
Stock of a material is lying in Quality inspection stock. but there is no inspection lot pending for this material. how can i send it to inrestricted stock. bcoz if i send it throgh movement type 321 by t- code mb1b, it gives error that "it is only possible throgh UD"
so guide me how can i transfer to unrestricted as no lot is there.
Hi
Stock of a material is lying in Quality inspection stock. but there is no inspection lot pending for this material. how can i send it to inrestricted stock. bcoz if i send it throgh movement type 321 by t- code mb1b, it gives error that "it is only possible throgh UD"
Go to material document of this material.see wheather Inspection lot is generated for this material.
it may haapen that you have made a Usage Degn but not done the stock posting.
check in QA32 whether there is any lot with SPRQ status.-->this means stock posting requires.
Revert back
Regards
Sujit
Similar Messages
-
Can our hp laserjet enterprise 500 color printer m551use 67lb card stock?
The printer specifications list card stock but no weights.
This question was solved.
View Solution.Hello,
the required media weight is not supported by the printer.
As you may find listed within the Media Weight specification below, the printer support up to 58 lb media.
Media weight:
Tray 1: 16 to 58 lb (plain); 28 to 58 lb (glossy);
Tray 2: 16 to 43 lb (plain paper); 28 to 58 lb (glossy paper)
You may find the product specification below:
http://h10010.www1.hp.com/wwpc/us/en/sm/WF06b/18972-18972-3328060-15077-236268-4184772-4184773-41847...
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution -
MB5B Report table for Open and Closing stock on date wise
Hi Frds,
I am trying get values of Open and Closing stock on date wise form the Table MARD and MBEW -Material Valuation but it does not match with MB5B reports,
Could anyone suggest correct table to fetch the values Open and Closing stock on date wise for MB5B reports.
Thanks
Mohan MHi,
Please check the below links...
Query for Opening And Closing Stock
Inventory Opening and Closing Stock
open stock and closing stock
Kuber -
Adobe Stock Photos Stuck in Trash and Photoshop CS2 won't run!
Okay, I apparently did something stupid. I'm not even sure how this happened, but I realized that Adobe Stock Photos folder was sitting on my desktop (I'm using OS X 10.5.6). I don't know when this happened and I didn't think I needed it so I dragged it to the trash. NOW I cannot run any of my Adobe software (includes Photoshop CS2, Illustrator CS2 and GoLive CS2).
I can see the folder sitting in my trash, but it won't let me drag it back out. So, just as a test, I tried dragging out the one other file (.jpg) and I can't get that one either. I know this isn't a Mac forum, but I'm desparate and cannot find anything to help me.
Probably I am going to have to reinstall everything and (of course) I can't find my CDs!!! Please don't get angry if I'm asking the wrong question. I've done an internet search and I cannot find any solutions.
Thanks, AnneAdobe stock photos does not even exist anymore.
Have you tried deleting your trash? I have no Adobe stock Photos on my computer and everything works. try restarting the computer. -
Consignment stock is NOT getting displayed in the MC.9 trnasaction.
Hi experts,
We have some vendor consignement stock for some of our materials.
In inventory trnasactions like MMBE, MB54 it is corrctly displayed.
In the structure S032 also the consigment stock was updated. But we are not able to see this Consignement stock in the transaction MC.9
Mc.9 is showing ZERO consignment stock.
What is the reason for this?
How to correct this?
Please help us in solving this.
Regards,
VijoveHi,
Your question can be answered in this [forum Topic|ABAP Development; in a shor time..
Regards
Narin. -
Report for Missing qty in stock transfer
how to Create a Missing Quantity list that gives the difference between sent and received quantities during Stock transfer. and send me tables involved in that, primary keys also
suppose, if we transfer goods from plant to plant or St loc to st loc with in one plant, if some goods missed due to some problems, i need that info.
diff beteen sending stock of plant 1 and receiving stock in plant2
Where can i gte all this fields -
Purchasing Report for invoice and stock
Hi guys,
in your opinion does it exist a unique report which contains the following informations for suppliers:
- invoice codes from supplier not yet paid
- POu2019s to supplier not yet delivered
- ATH stock at supplier
At the moment my customer separates informations per supplier via FBL1N (invoices not paid), ME2L or ME2M (open for delivery), and MB52 (special stock, type O)
Iu2019m looking for a solution were this 3 information will show on 1 screen by entering the supplier.I have tyed with ME2M but it is not sufficient...
Thanks in advance best regards
Massimilianohi,
What are you trying to get is an Updates from three different area, which are not connected to each other..
FBL1N will get updated once the Payement is done,
ME2M would be updated once the GR is done, (ME2M does have any selection Parameter which will include 'Payement done')
MB52 would be cumulative Stock on Hand (this stock deoesnt link to PO)
However, you can go for a small Z program to built a customised Report. -
hi guy's,
i am doing report for the stock statement .... my issue is in MB5B if i reverse some document it shows as it move's to issue QTY and my receipt is same but my closing stock is correct ...is there any std report avalible ....
thank's in advanceUse this code :
TABLES : MSEG,MKPF,MARA,MAKT,BEWART,MSLB,BSIM.
TYPE-POOLS : SLIS.
DATA : IT_FLDCAT TYPE SLIS_T_FIELDCAT_ALV,
IT_LIST_HEADER TYPE SLIS_T_LISTHEADER,
IT_EVENTS TYPE SLIS_T_EVENT,
GS_LAYOUT TYPE SLIS_LAYOUT_ALV,
WA_SORT TYPE SLIS_SORTINFO_ALV,
IT_SORT TYPE SLIS_T_SORTINFO_ALV,
REPID LIKE SY-REPID,
FRM_DATE(10),TO_DATE(10),
DISPTEXT(255),DISPTEXT2(255).
TYPES : BEGIN OF ST_OPBAL,
MATNR LIKE MSEG-MATNR,
MAKTX LIKE MAKT-MAKTX,
BATCH LIKE MSEG-CHARG,
BWART LIKE MSEG-BWART,
MENGE LIKE MSEG-MENGE,
ZEILE LIKE MSEG-ZEILE,
WERKS LIKE MSEG-WERKS,
SOBKZ LIKE MSEG-SOBKZ,
BUDAT LIKE MKPF-BUDAT,
SHKZG LIKE MSEG-SHKZG,
DMBTR LIKE MSEG-DMBTR,
MBLNR LIKE MSEG-MBLNR,
LGORT LIKE MSEG-LGORT,
END OF ST_OPBAL.
DATA : OPBAL TYPE ST_OPBAL OCCURS 0 WITH HEADER LINE,
TMP_OPBAL TYPE ST_OPBAL OCCURS 0 WITH HEADER LINE.
DATA : BEGIN OF BAL_NOREF OCCURS 0,
MATNR LIKE MARA-MATNR,
SHKZG LIKE MSEG-SHKZG,
DMBTR LIKE MSEG-DMBTR,
END OF BAL_NOREF.
DATA : BEGIN OF OPBAL2 OCCURS 0,
SNO(3) TYPE N,
MATNR LIKE MSEG-MATNR,
MAKTX LIKE MAKT-MAKTX,
OP_BAL LIKE MSEG-MENGE,
OP_STKVAL LIKE MSEG-DMBTR, "NEW
REC LIKE MSEG-MENGE,
T_OPBAL_REC LIKE MSEG-MENGE,
REC_STKVAL LIKE MSEG-DMBTR, "NEW
ISS LIKE MSEG-MENGE,
ISS_STKVAL LIKE MSEG-DMBTR, "NEW
SALES LIKE MSEG-MENGE,
T_ISS LIKE MSEG-MENGE,
CL_BAL LIKE MSEG-MENGE,
BATCH LIKE MSEG-CHARG,
SUBCON LIKE MSEG-MENGE,
CL_STKVAL LIKE MSEG-DMBTR,
END OF OPBAL2.
DATA SERNO(4) TYPE C.
DATA OPTOT TYPE P DECIMALS 3.
DATA RECTOT TYPE P DECIMALS 3.
DATA ISSTOT TYPE P DECIMALS 3.
DATA TOTALL TYPE P DECIMALS 3.
DATA FLG TYPE N.
DATA FLAG TYPE N.
DATA STOCKVAL TYPE MSEG-DMBTR.
DATA REC_STOCKVAL TYPE MSEG-DMBTR.
DATA ISS_STOCKVAL TYPE MSEG-DMBTR.
DATA CL_STKVAL TYPE MSEG-DMBTR.
SELECTION-SCREEN BEGIN OF BLOCK X WITH FRAME.
SELECT-OPTIONS: P_MATNR FOR MSEG-MATNR,
P_MGRP FOR MARA-MATKL,
P_DATE FOR MKPF-BUDAT,
P_PLANT FOR MSEG-WERKS DEFAULT 'NB01' OBLIGATORY NO INTERVALS
NO-EXTENSION .
SELECT-OPTIONS: P_STLOC FOR MSEG-LGORT NO INTERVALS NO-EXTENSION.
SELECTION-SCREEN END OF BLOCK X.
INITIALIZATION.
REPID = SY-REPID.
PERFORM FILL_FLDCAT USING IT_FLDCAT.
PERFORM FILL_EVENTS USING IT_EVENTS.
PERFORM FILL_LAYOUT USING GS_LAYOUT.
START-OF-SELECTION.
CONCATENATE P_DATE-LOW6(2) '.' P_DATE-LOW4(2) '.' P_DATE-LOW+0(4)
INTO FRM_DATE.
CONCATENATE P_DATE-HIGH6(2) '.' P_DATE-HIGH4(2) '.' P_DATE-HIGH+0(4)
INTO TO_DATE.
CONCATENATE TEXT-003 FRM_DATE' TO : ' TO_DATE INTO DISPTEXT.
CONCATENATE TEXT-004 P_PLANT-LOW ' Storage Location : ' P_STLOC-LOW
INTO DISPTEXT2.
PERFORM FILL_HEADER USING IT_LIST_HEADER.
SELECT A~MATNR
F~MAKTX
A~CHARG
A~BWART
A~MENGE
A~ZEILE
A~WERKS
A~SOBKZ
D~BUDAT
A~SHKZG
A~DMBTR
A~MBLNR
A~LGORT
INTO TABLE OPBAL
FROM MKPF AS D JOIN MSEG AS A
ON DMBLNR = AMBLNR AND
DMJAHR = AMJAHR
JOIN MARA AS E
ON EMATNR = AMATNR
JOIN MAKT AS F
ON FMATNR = AMATNR
WHERE A~MATNR IN P_MATNR
AND A~WERKS IN P_PLANT
AND A~KZBEW IN (' ','B')
AND E~MATKL IN P_MGRP
AND A~BWART NOT IN ('541','542','321','322','121')
AND A~KZVBR NOT IN ('A')
AND D~BUDAT LE P_DATE-HIGH.
LOOP AT OPBAL WHERE BWART EQ '544' AND LGORT EQ ''.
TMP_OPBAL = OPBAL.
APPEND TMP_OPBAL.
ENDLOOP.
DELETE OPBAL WHERE ( BWART EQ '309' AND DMBTR EQ 0 ).
DELETE OPBAL WHERE ( BWART NE '543' AND LGORT EQ '' ).
LOOP AT TMP_OPBAL.
OPBAL = TMP_OPBAL.
APPEND OPBAL.
ENDLOOP.
STOCKVAL = 0.
SORT OPBAL BY MATNR BATCH BUDAT.
LOOP AT OPBAL.
SELECT SINGLE LBLAB INTO MSLB-LBLAB FROM MSLB
WHERE MATNR = OPBAL-MATNR.
IF OPBAL-BUDAT LT P_DATE-LOW.
IF OPBAL-SHKZG = 'H'.
OPTOT = OPTOT - OPBAL-MENGE.
ELSEIF OPBAL-SHKZG = 'S'.
OPTOT = OPTOT + OPBAL-MENGE.
ENDIF.
For the duration II part *****************
ELSEIF OPBAL-BUDAT IN P_DATE.
IF OPBAL-SHKZG = 'H'.
ISSTOT = ISSTOT + OPBAL-MENGE.
ELSEIF OPBAL-SHKZG = 'S'.
RECTOT = RECTOT + OPBAL-MENGE.
ENDIF.
ENDIF.
AT END OF BATCH. " modified for chek
READ TABLE OPBAL INDEX SY-TABIX.
CLEAR BAL_NOREF. REFRESH BAL_NOREF.
SELECT MATNR SHKZG SUM( DMBTR )
INTO TABLE BAL_NOREF
FROM BSIM
WHERE BUDAT LT P_DATE-LOW AND
MATNR EQ OPBAL-MATNR AND
BWTAR EQ OPBAL-BATCH AND
BWKEY IN P_PLANT AND
BLART IN ('RE','WE','WA','PR')
GROUP BY MATNR SHKZG.
LOOP AT BAL_NOREF.
IF BAL_NOREF-SHKZG = 'H'.
STOCKVAL = STOCKVAL - BAL_NOREF-DMBTR.
ELSE.
STOCKVAL = STOCKVAL + BAL_NOREF-DMBTR.
ENDIF.
ENDLOOP.
CLEAR BAL_NOREF. REFRESH BAL_NOREF.
SELECT MATNR SHKZG SUM( DMBTR )
INTO TABLE BAL_NOREF
FROM BSIM
WHERE BUDAT IN P_DATE AND
MATNR EQ OPBAL-MATNR AND
BWTAR EQ OPBAL-BATCH AND
BWKEY IN P_PLANT AND
BLART IN ('RE','WE','WA','PR')
GROUP BY MATNR SHKZG.
LOOP AT BAL_NOREF.
IF BAL_NOREF-SHKZG = 'H'.
ISS_STOCKVAL = ISS_STOCKVAL + BAL_NOREF-DMBTR.
ELSE.
REC_STOCKVAL = REC_STOCKVAL + BAL_NOREF-DMBTR.
ENDIF.
ENDLOOP.
" MSLB-LBLAB (STOCK WITH SUBCONTRACTOR).
CL_STKVAL = STOCKVAL + REC_STOCKVAL - ISS_STOCKVAL.
TOTALL = OPTOT + RECTOT - ISSTOT.
IF OPTOT = '0' AND RECTOT = '0' AND ISSTOT = '0'.
FLG = 1.
ENDIF.
IF FLG = 1.
CLEAR FLG.
ELSE.
SERNO = SERNO + 1.
OPBAL2-SNO = SERNO.
OPBAL2-MATNR = OPBAL-MATNR.
OPBAL2-MAKTX = OPBAL-MAKTX.
OPBAL2-OP_BAL = OPTOT.
OPBAL2-REC = RECTOT.
OPBAL2-T_OPBAL_REC = OPTOT + RECTOT.
OPBAL2-ISS = ISSTOT.
OPBAL2-T_ISS = ISSTOT.
OPBAL2-CL_BAL = TOTALL.
OPBAL2-BATCH = OPBAL-BATCH.
OPBAL2-SUBCON = MSLB-LBLAB.
OPBAL2-OP_STKVAL = STOCKVAL.
OPBAL2-ISS_STKVAL = ISS_STOCKVAL.
OPBAL2-REC_STKVAL = REC_STOCKVAL.
OPBAL2-CL_STKVAL = CL_STKVAL.
APPEND OPBAL2.
ENDIF.
OPTOT = 0.
RECTOT = 0.
ISSTOT = 0.
STOCKVAL = 0.
ISS_STOCKVAL = 0.
REC_STOCKVAL = 0.
CL_STKVAL = 0.
ENDAT.
ENDLOOP.
WA_SORT-SPOS = 1.
WA_SORT-FIELDNAME = 'MATNR'.
WA_SORT-UP = 'X'.
WA_SORT-SUBTOT = 'X'.
APPEND WA_SORT TO IT_SORT.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = REPID
IT_FIELDCAT = IT_FLDCAT
IT_EVENTS = IT_EVENTS
IS_LAYOUT = GS_LAYOUT
IT_SORT = IT_SORT
TABLES
T_OUTTAB = OPBAL2.
FORM FILL_FLDCAT USING P_FLDCAT TYPE SLIS_T_FIELDCAT_ALV.
PERFORM FILL_PARAM_FLDCAT USING 1 'SNo' 'SNO' ' ' 'X'
'OPBAL2' P_FLDCAT.
PERFORM FILL_PARAM_FLDCAT USING 2 'Material No.' 'MATNR' ' ' 'X'
'OPBAL2' P_FLDCAT.
PERFORM FILL_PARAM_FLDCAT USING 3 'Description' 'MAKTX' ' ' ' '
'OPBAL2' P_FLDCAT.
PERFORM FILL_PARAM_FLDCAT USING 4 'Op.Bal' 'OP_BAL' 'X' ' '
'OPBAL2' P_FLDCAT.
PERFORM FILL_PARAM_FLDCAT USING 5 'Op.Stock Val' 'OP_STKVAL' 'X' ' '
'OPBAL2' P_FLDCAT.
PERFORM FILL_PARAM_FLDCAT USING 6 'Receipts' 'REC' 'X' ' '
'OPBAL2' P_FLDCAT.
PERFORM FILL_PARAM_FLDCAT USING 7 'Total' 'T_OPBAL_REC' 'X' ' '
'OPBAL2' P_FLDCAT.
PERFORM FILL_PARAM_FLDCAT USING 8 'Rect.Val.' 'REC_STKVAL' 'X' ' '
'OPBAL2' P_FLDCAT.
PERFORM FILL_PARAM_FLDCAT USING 9 'Issues' 'ISS' 'X' ' '
'OPBAL2' P_FLDCAT.
PERFORM FILL_PARAM_FLDCAT USING 10 'Iss. Val.' 'ISS_STKVAL' 'X' ' '
'OPBAL2' P_FLDCAT.
PERFORM FILL_PARAM_FLDCAT USING 11 'Cl. Bal.' 'CL_BAL' 'X' ' '
'OPBAL2' P_FLDCAT.
PERFORM FILL_PARAM_FLDCAT USING 12 'Cl.Stock Val' 'CL_STKVAL' 'X' ' '
'OPBAL2' P_FLDCAT.
PERFORM FILL_PARAM_FLDCAT USING 13 'BATCH ' 'BATCH' ' ' ' '
'OPBAL2' P_FLDCAT.
ENDFORM.
FORM FILL_PARAM_FLDCAT USING VALUE(P_COL) VALUE(P_TEXT) VALUE(P_FLDNAME)
VALUE(P_DOSUM) VALUE(P_NOZERO) VALUE(P_TABNAME)
PP_FLDCAT TYPE SLIS_T_FIELDCAT_ALV.
DATA : WA_FLDCAT TYPE SLIS_FIELDCAT_ALV.
CLEAR WA_FLDCAT.
WA_FLDCAT-COL_POS = P_COL.
WA_FLDCAT-SELTEXT_M = P_TEXT.
WA_FLDCAT-FIELDNAME = P_FLDNAME.
WA_FLDCAT-TABNAME = P_TABNAME.
WA_FLDCAT-DO_SUM = P_DOSUM.
WA_FLDCAT-NO_ZERO = P_NOZERO.
APPEND WA_FLDCAT TO PP_FLDCAT.
ENDFORM.
FORM FILL_HEADER USING P_IT_LIST_HEADER TYPE SLIS_T_LISTHEADER.
DATA: LS_LINE TYPE SLIS_LISTHEADER.
CLEAR LS_LINE.
LS_LINE-TYP = 'S'.
LS_LINE-INFO = TEXT-002.
APPEND LS_LINE TO P_IT_LIST_HEADER.
CLEAR LS_LINE.
LS_LINE-TYP = 'S'.
LS_LINE-INFO = DISPTEXT.
APPEND LS_LINE TO P_IT_LIST_HEADER.
CLEAR LS_LINE.
LS_LINE-TYP = 'S'.
LS_LINE-INFO = DISPTEXT2.
APPEND LS_LINE TO P_IT_LIST_HEADER.
ENDFORM.
FORM FILL_EVENTS USING P_IT_EVENTS TYPE SLIS_T_EVENT.
DATA LS_EVENT TYPE SLIS_ALV_EVENT.
MOVE 'TOP_OF_PAGE' TO LS_EVENT-FORM.
MOVE 'TOP_OF_PAGE' TO LS_EVENT-NAME.
APPEND LS_EVENT TO P_IT_EVENTS.
ENDFORM.
FORM TOP_OF_PAGE.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = IT_LIST_HEADER.
ENDFORM.
FORM FILL_LAYOUT USING P_GS_LAYOUT TYPE SLIS_LAYOUT_ALV.
P_GS_LAYOUT-COLWIDTH_OPTIMIZE = 'X'.
P_GS_LAYOUT-ZEBRA = 'X'.
P_GS_LAYOUT-FLEXIBLE_KEY = 'X'.
ENDFORM.
FOR TESTING PURPOSE.
*SORT OPBAL BY BUDAT.
*CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = REPID
IT_FIELDCAT = IT_FLDCAT
IT_EVENTS = IT_EVENTS
TABLES
T_OUTTAB = OPBAL.
*FORM FILL_FLDCAT USING P_FLDCAT TYPE SLIS_T_FIELDCAT_ALV.
PERFORM FILL_PARAM_FLDCAT USING 1 'MBLNR' 'MBLNR'
'OPBAL' P_FLDCAT.
PERFORM FILL_PARAM_FLDCAT USING 2 'CREDIT/DEBIT' 'SHKZG'
'OPBAL' P_FLDCAT.
PERFORM FILL_PARAM_FLDCAT USING 3 'MOV.TYP.' 'BWART'
'OPBAL' P_FLDCAT.
PERFORM FILL_PARAM_FLDCAT USING 4 'ST.LOC.' 'LGORT'
'OPBAL' P_FLDCAT.
PERFORM FILL_PARAM_FLDCAT USING 5 'STOCK VAL' 'DMBTR'
'OPBAL' P_FLDCAT.
PERFORM FILL_PARAM_FLDCAT USING 6 'POS.DATE' 'BUDAT'
'OPBAL' P_FLDCAT.
*ENDFORM. -
Hi,
We have a requirement in which a Customized report has to be developed. The report needs to display the opening stock , Total reciept, consumption and closing stock for supplier wise material.
We came across a standard report MB5B in which all these values are available. However inorder to display these values in a customized report we require a standard function module. Please provide us a std function module that can solve the purpose.
If the std module is not available (i dnt come across one) kindly porvide an alternaitve for the same.
Regards,
Milan ThakerHi,
Use Submit Statement to get the output data from MB5b.
Ex:
Create selection screen with required filelds and use like this
SUBMIT RM07MLBD with MATNR in r_matnr
with LGBST eq ''
with BWBST eq 'X'
with datum in datum
with bukrs in bukrs
with werks in werks
with lgort in lgort
with charg in charg
with bwtar in bwtar
with bwart in bwart
Rgds
Aeda -
Opening and closing stock at storage location level
Dear all
I need a std report which will give the opening and closing stock at storage location level, Or should I go for dev. if yes please guide me.
Regards
SamuelHi,
check if you can use S_P00_07000139 report, select "Display stock movement by plant (with amount) and further select Sloc from layout.
Regards,
Vikas -
Opening and closing stock balances
Hi
What report can i use to show the opening and closing stock balances of materials for the last 12 months.
Thanks
VineshYou can view the report in MMBE.
other than this you can try
MBEWH and MARDH
Also follow the link:
Re: op.& closing stock detail in MM
Thanks
Nisha -
Open order qty,Delivered qty,issued qty, and closing stock---Tables
Gurus,
I need to Prepare a report which will show open order qty,Delivered qty,issued qty, and closing stock.
Please help me with table names where i can find .
Regards
venu gopalHi,
Try EKPO & EKBE tables..
Thx
Raju -
How can i see the opening stock , reciepts , consumption , closing stock for a particular material between a particular period ??/
pls helpMB5B-Stock on Posting date
Is the best T code for the query,
Make sure you check(tick mark) the valuated stock check box else, you will get report on only plant stock and no special stocks will be considered
With Regards
MNarayanan -
Dear MM consultants,
We need to know which inventory report will give the stock matching to MB52 report??Including sale order stock
We need to have sale order stock with value in inventory report?? Which report fulfill this
pl reply
Guruhi,
i need to compare MB52 with MC.9 but sale order stock not covered in MC.9?
pl reply which report is suitable
guru -
BW:Inventory stock Report issue based on Vendor and PO number
Dear Guru's.
Requirement is to report different inventory stock's (Total Stock, blocked stock, stock in transit..etc) based on plant, material, storage location, vendor and purchase order in BW.
For Example:
Plant
material
Stock in Transit
Total Stock
1000
50000001
0,00
100kg
1000
50000002
500kg
600kg
If we drag the Vendor or Purchase Order Number into the report, Data gets Splitted into +ve (Inflow) and -Ve(Outflow) values.
For Example:
Plant
material
Vendor
Purchase Order
Stock in Transit
Total Stock
1000
50000001
54545
567896
+300 kg
+400kg
1000
50000001
-300kg
-300kg
1000
50000002
54549
567899
+900kg
+800kg
1000
50000002
-400kg
-200kg
I Think this is because no vendor assigned to outflow data. this is my guess i don't have much knowledge on MM. i have tried to restrict the keyfig's with stock category, but for most of the vendors or PO 's its unassigned.
But we need the data in single as follows. can any one suggest me any steps to achieve this in BI or BO.
Plant
material
Vendor
Purchase Order
Stock in Transit
Total Stock
1000
50000001
54545
567896
0,00
100 kg
1000
50000002
54549
567899
500 kg
600kg
Thanks in Advance,
DevHi Sheshu and hi Srinu
Already tried constant selection but it did not helped, the same keyfigure value is displayed in all the rows.
that means the total stock value is repeated for all the vendors for a particular material.
For example:
Plant
material
Vendor
Purchase Order
Stock in Transit
Total Stock
1000
50000001
54545
567896
0,00 kg
+400kg
1000
50000001
54546
567898
0,00 kg
400kg
1000
50000001
0,00 kg
400kg
1000
50000002
54549
567899
+900kg
+800kg
1000
50000002
+ 900 kg
+ 800 kg
Regarding the BO settings, i need to try it.
Any more suggestions will be much more helpful.
Thanks and Regards, Sri -
Date Wise and Storage Location Wise Stock Qty & Value Report......
Hi Experts,
We want a report Date Wise(As on 31.03.2008) and Storage Location Wise Quantity & Value Report for only Finish Materials. Is there any report ?
From Mb5b we canot get storage location wise report as we get only plant level qty and value.
Pl. guide us.
Regards,
YusufHi Yusuf,
Try the Tcode: MC.9 there enter the site and article and executeYou will get details of the article
stock, value. if you double click the article you will get the details of storage location.
Hope it will be help for you
Regards
GK
Maybe you are looking for
-
JPG images not displayed correctly in Bridge and Photoshop
I am using CS4 under OSX 10.4.11 on a PowerMac G5 Quad. Images which have been captured as JPG are displayed fine by Preview, but when opened in Bridge, Camera Raw or Photoshop. the colours are all "washed out". The attached screen capture should giv
-
I've changed my "My Music" folder and now I cant get iTunes to run!
Ok, Maybe some has a fix for this - I am running Vista and I have moved my "My Music" folder from its original location to its own dedicated hard drive (F:). Now when I install and try to run any iTunes version I get the error "The folder iTunes cann
-
How do I delete a event in iPhoto without it deleting from my Facebook?
Hi I am trying to get harddrive space back on my Mac Air. I have copied all my albums to an external drive and deleting the originals from iPhoto. When I am doing this it is deleting all assosiated photo's from Facebook. How do I turn it off so I can
-
Hi there, I have a schema with 2 dimensions time (It contains 2 years 1990 -1991 and has no hierarchy) and geography (levels:country-continent). I need to mention that i have 2 groups of files: 1) for year 1990 2) for year 1991 Each group represents
-
TS3274 emails are going out twice how do i stop this
how do i stop emails from going out twice on iPad