QI stocks to unrestricted

Hi,
I have QI stocks and I need it to transfer to unrestricted.But when itried to apply Usage decision,the stock did not transfer from Qi to unrestricted stock
I also did 321 mvt but was not able to proceed with it bec the system prompts an error "Change batch is for QM only".
What are the steps I need to do to proceed to this.

Hello Ellen,
If QM is activated,then the system will not allow you to move the stock doing a manual transfer such as 321.That is why you are getting the error.
If you have done UD without any errors and got the document posted,then go to stock posting Inspection posting lot tab,enter the amount to be posted and click on proposal button.This will move the material to unrestricted.If not moved,please check the inspection lot for any errors.
If you have already made UD,system will not allow you to make any changes in Inspection lot.
Reward points if useful.
Regards
George

Similar Messages

  • Report for material moved from blocked stock to unrestricted stock

    Hi,
    Is there a standard report in WM showing list and qty of materials moved from blocked stock to unrestricted stock.
    Regards,
    Pratap

    It would have been easy if there was a specific WM movement type for such transfer but due to the reason that the WM 309 is connected to various IM movement types, there is no direct report to get this information.
    Conversely, you may use MB51 with the combination of the WM managed storage location and movement type for your purpose. If there are multiple storage locations assinged to the same warehouse then you may put a range in the selection criteria.

  • Revaluation in stock transfer to Sales Order stock from unrestricted

    User is trying to do a stock transfer posting from unrestricted to Sales order stock.  Now the system is throwing an error saying that account setting has not been done for UMB (OBYC setting).  I have given the GL for this UMB transaction type in OBYC>  UMB is for posting Gain/Loss from revaluation.
    I dont understand how a revauation happens when we transfer stock from unrestricted to Sales Order Stock ?  What is the purpose of that in our scenario, could you please explain.

    Hi:
            Normally it should not happen in case of stock transfer posting. Please check the movement type settings for valuation class of your material and see if the transaction type UMB has been set against valuation class in OMJJ...Account grouping.
    Hope it will help you.
    Regards

  • How to post return stock to unrestricted stock for only Plant & Material Type combination?

    Hello Everyone,
    At present, whenever the stock is returned then it posted through 655 movement type. So, material is posted as quality stock.
    Now, the requirement is to post the stock to unrestricted stock for Plant and Material type combination only. Which means, if the plant is 1413 and the material type is ERSA, VERP, and HIBE then for return sales order system post the stock directly to unrestricted stock, instead of quality stock.
    So, is there any standard way of configuring the above scenario without going for validation (Z Fields)?
    Regards
    Anwar

    Dear Mohammed ,
    as per your scenario , there is two movement type has to trigger in the Delivery level according to the plant and material combination .
    as per my knowledge it will not configurable in standard process . this will possible with user exit logic only .
    follow the below logic to achieve your issue .
    you have to create two item categories and two schedule lines with (655 &653) , that means your movement type has to trigger at sales order level only . write a logic in the user exit - MV45AFZZ -USEREXIT_MOVE_FIELD_TO_VBAP , if this combination matches then automatically item category has to over write other wise it will copy the existing item category .at delivery level you can see two movement types in item level.
    wait for other experts solution , if any standard is possible or not  .
    Regards,
    C.B Reddy.

  • Posting of QI stock into Unrestricted stock (URGENT)

    Hi All,
    At the moment, we are posting QI stock into Unrestricted stock using MB1B with Mvt type 321. But the problem is we have to enter each material & qty manually, i,e, if a PO has 10 lines, i have to manually enter each material in the PO & then the qty. Is there any other transaction or way in which i can do this transfer posting with reference to the PO, thereby the system automatically puts the lines in that PO & i can then delete the material or modify the qty if it has not passed QI check.
    I tried in MB1B with Mvt 321 by creating with reference to PO, the system prompts an error & says not possible.
    Hope my problem is clear, await inputs.
    Vivek

    Hi Aasif,
    As mentioned by you i have done the settings.
    1. If i enter the mvt. type 321 in MB1B & then click on create w/ ref to PO, i still get an error.
    2. But if i just enter the mvt 321 & enter inside MB1B, there i now see a field called Purchase order. But if i enter the purchase oder number here, the materials inside this PO are not automatically displayed, the screen just becomes grey.
    What i actually want is, when i enter the PO number, the materials should be displayed, which would resolve my issue.
    Await your inputs.
    Vivek

  • Bapi to move Quality inspection stock to unrestricted stock

    Hi All,
    I am developing a report where the  material batches should be distributed  to other storage locations within a plant (as we do it in MB1B with movement type 311).But if that material is in QI stock( inspection lots) then that should be forcibly moved to unrestricted stock.Is there any BAPI available to mimick QA11 and force the material from QI stock to unrestricted stock.
    Thanks in advance,
    Pramod

    Hi Peter,
    The requirement is to mimick the transaction QA11.I am all ready using the BAPI_GOODSMVT_CREATE to post the goods from unrestricted stock.But,to move the stock under QI inspection I have to first move it to unrestricted stock and then post it.Is there any other BAPI available for mimicking the transaction QA11.
    Thanks,
    Pramod.

  • Stock Status of meterial  is set as 'blocked stock' and 'unrestricted"

    Any Standard Report Stock Status of meterial  is set as 'blocked stock' and 'unrestricted"?

    Hi,
    You can check the stock status using transaction mmbe......
    Regards,
    Noopur

  • Unrestricted stock to restricted and retricted stock to unrestricted

    Dear Experts,
    What movement type to use for below transfer posting?
    1) unrestricted stock to restricted
    2) retricted stock to unrestricted
    Thank you.

    341 Transfer posting unrestricted-use stock to restricted-use stock
    342 Transfer posting unrestricted-use stock to restricted-use stock - reversal
    343 Transfer posting blocked stock to unrestricted-use stock
    344 Transfer posting blocked stock to unrestricted-use stock u2013 reversal
    Hope this will help you
    Enjoyyyyyyyyyyyyyy
    Akshit

  • Sales order stock to unrestricted

    Hi Experts,
    In MTO scenario, creation of production order is based on sales order. While doing GRN it is going to sales order stock. Is there anyway to post directly to the unrestricted usage?
    For this what are the prerequisities?
    Anybody plz help me?
    Naren

    Dear,
    Im not clear on why you want to post th stock to  unrestricted.
    IN MTO,goods are manufactured for a particular customer and the planning copies the requirements from sales order.
    Once the processing is completed,the goods are picked from sales order stock for completing the delivery and billing.
    Here if reqired you can transfer the stock to unresticted manually after the GRN is posted.
    This can be done in MIGO,transfer posting using the movement type 413.By doing this the requirement of the sales order will not be closed and it will be available for planning.
    Regards,
    Joseph Charles Vaikathussery

  • Posting from qm stock to unrestricted stock ........URGENT HELP NEEDED

    User created a Purchase order and posted it to qm stock.The inspection lot is created for the Purchase order with these status CRTD, REQ,CHCR,SPRQ. How do I post the stock from QM stock to unrestricted stock.
    in QE51N also it gives me an error saying "no selected entries found "
    I tried to change the usage decision in tcode:qa32 or qa12 but it is giving me an error not and  letting me change it.
    So my question is how do i post the stock to unrestricted stock .Please can someone explain with detailed steps.
    thank you

    Devang,
    Check the following points
    1. Check if inspection plan is assinged to inspection lot, if inspection plan is not assinged. Assign inspection plan to material and go to qa02 & calculate sample size.
    2. Check if more than one inspection plan asssinged to material , it mutiple inspection plan assinged to material , you need to manuallly assign the inspection plan to inspection lot and calculate sample size.
    Sanjay

  • Releasing stock from return stock to unrestricted stock

    Hi all
    Can anybody tell me how to move the stock from return order stock to unrestricted stock so that goods which is been returned from customer can be sold to another customer?
    Regards..,
    Karthik

    Hi,
    If u want to post the stock to ur own location for future use u can use
    MB1B transaction and with movement type 453 you can post it
    hope it will help
    regards,
    santosh

  • Pointers Needed on Movement from Blocked Stock to Unrestricted Stock !

    Hi Gurus,
    I have a scenario wherein I need to take care of "Movement from Blocked Stock to Unrestricted Stock using Movement type 343 and in the next step need to do Material to Material transfer using movement type 309"
    My Query is:
    1. What does it mean when we say Movment from Blocked stock to Unrestricted stock ?
    2. What does it mean when we say Material to Material transfer ?
    Please help me with pointers on finding a BAPI to do the above stock movements or material to material transfer.
    Many Thanks,
    Madan

    Hi,
    Please help me with pointers on the mapping parameters for this BAPI.
    Here are the details which I am using, but gettin error message -
    T ID                   NUM MESSAGE
    E /CWM/MM              001 Transfer the parallel entry quantity/entry unit of measure
    I have filled below fields:
    GOODSMVT_HEADER
           PSTNG_DATE                   11/25/2009
           DOC_DATE                       11/25/2009
           PR_UNAME                        MyName
           HEADER_TXT                    TEST
    GM
    04  (Transfer Posting)
    GOODSMVT_ITEM
               MATERIAL                       100001374
               PLANT                          1AAE
               STGE_LOC                       B100
               BATCH                          0111331309
               MOVE_TYPE                      343
               ENTRY_QNT                                10.000
               ENTRY_UOM                      EA
               ENTRY_UOM_ISO                  EA
               MOVE_MAT                       100001374
               MOVE_PLANT                     1AAE
               MOVE_STLOC                     B100
               MOVE_BATCH                     0111331309
    Need your help to resolve this.
    Many Thanks,
    Madan

  • How to move quality blocked stock to unrestricted

    During Quality inspection I have put 2 nos of the items in blocked stock and done no further processing. Do i need to create notification and then transfer the stock to unrestricted.
    Kindly guide with the T-code
    Thanks

    how r u sure that the blocked stock which is showing in mmbe is that stock which u have placed in blocked stock through the inspection lot .
    i had also faced the same error some time back.
    after analysis i found out that the stock which i was thinking was placed to blocked stock thru an inspection lot wasnot the amount showing in mmbe.
    what u can do is proceed all the inspection lot in QM against the material code.
    regards,
    indranil

  • RE: Conversion of Restricted stock to unrestricted stock

    Hi All,
              After PO when the stock is posted to storage location the stock is posted to restricted stock by default, where batch management and classification is involved. I want to know why the stock is posted in restricted stock or at least I want to know to convert restricted stock to unrestricted stock.

    Hi,
    If you want to change the batch status from restricred to unresticted use you can do in MSC2N
    If you want to change the configuration to select Unresticted use goto
    SPRO > Logistic general > Batch management > Batch status management > Activate Batch Status Checking in Warehouse Management.

  • Blocked stock to unrestricted stock in wm

    Dear all,
    i want to move the stock from blocked stock to unrestricted stock in WM.our issue is there is no stock availability of Blocked stock in IM.
    Is there any manual transfer available in wm for the same. what could be possibilty for the above issue.i.e stocks available in wm not in IM.
    Kindly guide me
    Regards,
    velu

    In WM
    Posting change from blk.to un rest.
    1) LU01- MOV TYP 309,
    2) LT05
    Question?
    A)have you already done the transfer posting in IM? otherwise where is the stock in IM and why it is available in WM?
    b) If you have already done in IM try to find the mat. doc?In the mat.doc you see in the WM View posting change number,enter the posting change number in LT05 !
    If not solved pls check LS 26,let me know the Stock status...
    Regards,
    eswarmanu...
    Edited by: eswarmanu on Nov 18, 2008 6:40 AM

  • Weird Problem in QM stock posting from Quality Stock to Unrestricted

    Hi all,
    Today I hit a weird problem in SAP and struck there for the past 5 hours. The problem is,
    I have a batch managed material, for which QM view is available. 01 inspection type is activated along with the "Post to Inspection Stock indicator" for that material in material master.
    Now I am creating a Purchase order and doing a goods receipt in MIGO. Then it creates a inspection lot of type 01
    for this material and puts the stock in to Quality stock (I checked in MMBE).
    Now as per standard SAP behaviour, if I want to move the stock from Quality to Unrestricted, I can only do it in QA11 trasaction through Inspection stock tab. If I try to do 321 (Quality to Unrestricted) movement in MIGO, the system will send an error message "Change the inspection stock of material XXXXXXX in QM only"
    But in my case, I am not getting this error message, the system is still allowing me to move the stock from Quality to Unrestricted thorugh MIGO using 321 movement. This is not standard and I don't want this.
    This behavior is seen in 04 and 08 inspection lots also (with post to insp stock indicator).
    The aftermath of this problem, if I do a MIGO transfer posting of say 100 PC through 321. The system is correspondingly updating the MMBE transaction by moving this 100 PC from Quality stock to Unrestricted. But if I go to QA11 and check, the QM still shows that 100 PC to be in Quality stock itself, thus creating a mis-match between actual stock situation and the stock situation in QM.
    I already checked and most of the SPRO nodes and I am left clueless. One more thing, Usage Decision is not yet done for the inspection lot and it is just REL status. Also thee are no developments or enhancements in QM module in my project. Only 1 enhancement relating to custom sample label and rest of all the functionality is standard.
    Sorry for the long post. How to correct this? Please help me!
    Thanks in advance,
    Vinodh

    I don't know why this happenned.  Look at the QM view of the material master and see if the "inspection setup" flag on the QM view is clicked on.  That is usually greyed out and is set by having an inspection type activated.  You can't manually set that once an inspection type is added.  But that is the indicator I believe is used to determine if regular stock movements are allowed for QM stocks.
    I would try to first clear all your inspection lots first.
    Then delete all the inspection types from the material.  And I mean actually go in and delete them. 
    Then use QA08 to reactivate the ones you need.
    Then see if this solves the problem.
    FF

Maybe you are looking for