请教, SUSE10平台的BOE无法将文件传输到WIN2003平台的FTP服务器上

2. SUSE10平台的BOE无法将文件传输到WIN2003平台的FTP服务器上,只会在FTP服务器上创建一个0K大小的空文件
BOE是SUSE10下的,而FTP是WIN2003下的。FTP服务器是正常可以使用的。BOE的FTP发送方式也是配置正确的(我测试过,可以把报表schedule之后发送到搭建在SUSE10平台下的FTP服务器上)
我还做过测试, 直接从 Linux 上用FTP命令可以把文件上传到这个win2003的FTP服务器上.
在报表schedule的过程中,打开history窗口, 看到这个实例一直都不会success, 也不会failure, 就一直running, 然后在 FTP 服务器上就看到一个空的0K大小的文件。

首先确保rexec命令已经启用并处于运行状态了。
1.BOE的服务确切的说job server是运行在哪一个Suse10的账户下?
2.做一个简单的测试,用上述账户登录Suse10,在命令行中键入 ftp <FTP serve的FQDN>,输入登录FTP Server用户名密码,然后将一个文件复制到目标文件夹,看能否成功。
3.用第二步中相同的FTP登录账号、目标文件夹,再计划一张CR报表,看能否成功。

Similar Messages

  • BOE XI R2 - Configuring RAS with Service user, RAS Fails to start...

    Colleagues:
    Where would kbase article c2018785 be found?
    I am configuring my BOE XI R2 to use End-to-End SSO via IIS using this document from Business Objects:
    Link: [https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/403cdf46-c63e-2b10-2997-978cb8ba59f0]
    In this document, you create a service user under which certain applications run, including the Report Application Server.
    There is a specific note on page 6 in the doc which states:
    The RAS server may fail to start under this new service account. If you experience this issue, follow the steps outlined in the following kbase:
    Link: [http://support.businessobjects.com/library/kbase/articles/c2018785.asp]
    Unfortunately, the link is out of date, and I have not found the article using the existing search tools.
    I did use the -trace argument to the command line to start up the RAS service, and the output is follows:
    Timestamp     ProcessID     ThreadID     Message
    [Thu May 07 13:21:39 2009]     4448     4228     (.ashwin32service.cpp:165): trace message: RAS starting
    [Thu May 07 13:21:39 2009]     4448     4228     (.dtsdts.cpp:1794): trace message:
    TraceLog 2009  5  7  8:21:39.936 4448 4228 (.dtsdts.cpp:2039): CDTSApp::InitInstance(): In CDTSParameters::RUN
    [Thu May 07 13:21:39 2009]     4448     4228     (.dtsdts.cpp:1794): trace message:
    TraceLog 2009  5  7  8:21:39.936 4448 4228 (.dtsdts.cpp:2055): CDTSApp::InitInstance(): Starting server. Process Id=4448
    [Thu May 07 13:21:39 2009]     4448     4228     (.dtsdts.cpp:1794): trace message:
    TraceLog 2009  5  7  8:21:39.936 4448 4228 (.dtsdts.cpp:2062): CDTSApp::InitInstance(): setServerParameters() done
    [Thu May 07 13:21:39 2009]     4448     4228     (.dtsdts.cpp:1794): trace message:
    TraceLog 2009  5  7  8:21:39.936 4448 4228 (.dtsdts.cpp:2130): CDTSApp::InitInstance(): initLicenseLimit() returns 1
    [Thu May 07 13:21:39 2009]     4448     4228     (.dtsdts.cpp:1794): trace message:
    TraceLog 2009  5  7  8:21:39.936 4448 4228 (.dtsdts.cpp:3895): CDTSApp::loadServerOptions(): about to SaveToRegistryAsDefault
    [Thu May 07 13:21:39 2009]     4448     4228     (.dtsdts.cpp:1794): trace message:
    TraceLog 2009  5  7  8:21:39.936 4448 4228 (.dtsdts.cpp:3897): CDTSApp::loadServerOptions(): done SaveToRegistryAsDefault hr=-2147024891
    [Thu May 07 13:21:39 2009]     4448     4228     (.dtsdts.cpp:1794): trace message:
    TraceLog 2009  5  7  8:21:39.936 4448 4228 (.dtsdts.cpp:3916): CDTSApp::loadServerOptions(): error Access is denied.
    [Thu May 07 13:21:39 2009]     4448     4228     (.dtsdts.cpp:1794): trace message:
    TraceLog 2009  5  7  8:21:39.936 4448 4228 (.dtsdts.cpp:2134): CDTSApp::InitInstance(): loadServerOptions() returns 0
    [Thu May 07 13:21:39 2009]     4448     4228     (.dtsdts.cpp:1794): trace message:
    TraceLog 2009  5  7  8:21:39.936 4448 4228 (.dtsdts.cpp:2194): CDTSApp::InitInstance(): getDataEngineName() returns C:TrouxBusiness Objectscommon3.5 incrpe32.dll
    [Thu May 07 13:21:39 2009]     4448     4228     (.dtsdts.cpp:1794): trace message:
    TraceLog 2009  5  7  8:21:39.936 4448 4228 (.dtsdts.cpp:2197): CDTSApp::InitInstance(): openEngine() returns 0
    [Thu May 07 13:21:39 2009]     4448     4228     (.dtsdts.cpp:1794): trace message:
    TraceLog 2009  5  7  8:21:39.936 4448 4228 (.dtsdts.cpp:2292): CDTSApp::InitInstance(): preloadMSXML() done
    [Thu May 07 13:21:39 2009]     4448     4228     trace message: EnCOMSessionMgr::EnCOMSessionMgr begins...
    [Thu May 07 13:21:39 2009]     4448     4228     trace message: EnCOMSessionMgr::EnCOMSessionMgr trying to get Singleton SessionManager.
    [Thu May 07 13:21:39 2009]     4448     4228     trace message: CInfoSessionManager::Initialize start
    [Thu May 07 13:21:39 2009]     4448     4228     trace message: CInfoSessionManager::Initialize, start the cluster refresh thread
    [Thu May 07 13:21:40 2009]     4448     4228     (.dtsdts.cpp:1794): trace message:
    TraceLog 2009  5  7  8:21:40.217 4448 4228 (.dtsdts.cpp:2445): CDTSApp::InitInstance(): caught UNKNOWN EXCEPTION!!!
    [Thu May 07 13:21:40 2009]     4448     4228     (.dtsdts.cpp:1794): trace message:
    TraceLog 2009  5  7  8:21:40.217 4448 4228 (.dtsdts.cpp:2461): CDTSApp::InitInstance() returns 0
    [Thu May 07 13:21:40 2009]     4448     4228     (.dtsdts.cpp:1794): trace message:
    TraceLog 2009  5  7  8:21:40.217 4448 4228 (.dtsdts.cpp:1039): CAgentMapMT::ShutDown - outstanding agents:
    [Thu May 07 13:21:40 2009]     4448     4228     (.ashwin32service.cpp:329): trace message: RAS Exiting: return code = 0
    In the Windows event viewer, this error is echoed:
    Failed to load Report Application Server settings from the system registry.
    Detailed Message: Access is denied.
    It seems my service account needs a certain permission to be able to load and read the registry for this application, and I'm sure this permission is discussed in the missing kbase article. 
    Could you please let me know what permission is required for this user on the OS? This is Win2003 x64 SP2.
    Thanks, and have a good day

    Hi,
    if this a permissions problem then just start +regedit*, go to
    My Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Business Objects
    select it, press the right mouse button and choose Permissions. Press the advanced button and assign your service account with full control at this point of the registry. Do not forget to select the +Replace Permissions Entries on all child objects ... + option.
    You can also take a look at Notes 1199630 and 1201489 (this one is for CR 10 but it may be worth it to follow the instructions there) ( [https://service.sap.com/notes])
    Regards,
    Stratos

  • Need a way to Hide the Destinations (FTP, Email...) when scheduling reports

    We do not have destinations set up for FTP, email and unmanaged disk in our environment due to our stringent security requirements.  Even after being told these are not available, our users continue to try to schedule the report to go to these destinations and they are causing the reports to fail and utilize database resources for a report that will not complete successfully.
    Does anyone know if there is a way to hide the destinations from users when they schedule reports?  I know this was an option a couple of versions back but I cannot find it in BOE XI3.1 SP3.  The only option we want our users to see is Inbox and their personal folders.
    Our environment is:
    Windows Server 2003 SP2
    Tomcat 5.5.30
    Java 1.6
    BOE XI 3.1 SP3 FP3.2
    Thanks.
    Rich

    Hi,
    We can control distinations by configuring them on Respective Servers, which should be protected from business users.
    Assuming that you wish to configure only email as destination for Crystal Reports,  then
    Step 1 : Access properties of Server-> CrystalReportsJobServer
    Step 2 : Choose only valid Desitnations that you wish to provide, In our case it is only eMail
    Always go for cloning existing server if you are customization. Which is good practice than directly working on default server.
    HTH
    B Ravi Shankar

  • Seek help: How to make XI 3.0 BOE Cluster

    My aim to make cluster is:
    1. High availability, that is, when Server A is down, Server B can take place.
    2. Let job servers on Server B to join Server A's large load publication task to improve performance.
    My Steps:
    1. New install BOE XI 3.0 on both Server A and Server B, both win2003 sp2 OS.
    2. Server A is installed first, so it use an Oracle DB as the CMS repository. And Server B is pointed to the same repository.
    I want to change Server B's file store's location after adding Server B's CMS into cluster, however, I found when logging into the CMC, I can only see all servers from server A, and Server B's cms in the server List, and no Server B's node in CCM's SIA list.
    The problem is :
    1. Server B's cms is stoped, (it's enabled), and I tried manully start it, but failed.
    2. How can I let job servers on Server B to register into the new cluster, I don't find any place to see them.
    In XI R2, I can add -ns newCluster into servers' command line.
    I think, I don't follow the right steps, any one can help?
    Thanks in advance!
    Jennie

    Clustering XI3 servers is explained in detail starting on page 266 in the Admin Guide.
    In a nut shell, you will need to delete your current SIA on server B, then add a new SIA in CCM pointing it to the same CMS DB SIA on server A is using.
    Once you see new node in CMC, you can clone all servers from node A to node B, which will keep all the server settings they have in A. Including FRS location.

  • Outputing scheduled Webi reports to a ftp destination in encrypted format

    Is there any way I can write out a webi report to a ftp or SMTP destination in an encrypted format ?
    I can schedule the report and send it to a ftp destination but I don't know if that report can be in an encrypted format ?
    Thanks,

    Hi Rajesh,
    what do you want to encrypt ? The Report as itself or the communication to ysour destination (f.e. sFTP) ?!
    sFTP is not a supported feature...yet. But there is a Workarround on how to use sFTP. Check the Articles of BOE XI R2 here on SDN. You should find the PDF on how to do that. Its compareable to XI 3.x
    If you want to encrypt the Report as itself there is no feature from BO on how to do that.
    There are already some ADAPT cases opend for enhancment of sFTP in further releases.
    Regards
    -Seb.

  • 2 Things: Safari Bookmarking + FTP Publishing

    Sounds like a stupid question but does anyone know how to
    bookmark a specific topic using safari when using a Flash skin??
    I'm 85% sure this cannot be done.
    Also, is anyone else experience slow ftp publishing times?
    I'm publishing to a win2003 via ftp and it take 2 minutes to
    publish. Is there some way to tweek server 2003 to speed this up?
    Any alternative ftp solutions? I'll have to revert to publishing
    via a shared network if I don't get this solved.
    I'm using rh6.

    1. It wont allow me to upload the movie clip that i
    have made - in .mov format.
    It says that the name is not allowed - so i have
    tried renaming it to all sorts of things and nothing
    works - it says forbidden. Does anyone have any idea
    what this means?
    Many servers do not accept names with spaces in them, and some might require lower-case letters and no special characters.
    2. I have made 2 pages that should have RSS feeds.
    There are XML pages uploaded to the server, but when
    you try to subscribe on the site it says that it kind
    find any RSS information on the server.
    You broke the site structure created by iWeb by failing to upload the folder with the same name as your site has inside iWeb, namely the folder called Northstars. Instead you uploaded the contents of this folder. Always upload that folder plus the index.html file published alongside it.

  • BOE上一个很奇怪的问题(Database Connector Error)

    BOE版本: XI3.1
    OS:  SUSE10
    DB:  SAP BW
    情况是这样的: 安装BOE时, 用的是客户从Service Center上下载的临时的License, 在2010-1-12日到期.
    安装完后在2009年12月底替换过一个临时的License, 是到2010-3-8日的. 客户这边由于公司采购流程的原因, 正式的license流程还没有走完,只好先用临时的license了.
    现在问题出来了, 2010-1-12的早上, 包括测试的BOE系统和正式的BOE系统上的报表都同时无法再连接后台SAP BW了, 显示的错误为 Error in File ~tmp2fa55fbd87812b7.rpt: Database Connector Error, 所有报表都是同样的问题, 而且连基于SAP TABLE的报表也连不了了,错误提示是一样的.而在此之前,所有报表都是可以正常运行的.
    这里顺便说一下, 在PC端, 用Crystal Reports 2008来连接SAP BW是正常的. 可以抓到数据.
    不知道是不是license的影响导致这样的问题,请大家帮忙看看.
    Error in File ~tmp2fa55fbd87812b7.rpt: Database Connector Error

    问题解决了, 是IK的license没有更新过来, 现在搞定了.

  • FTP-client behind RRAS - unable to connect to external FTP servers

    FTP-client behind RRAS - unable to connect to external FTP servers
    A small network (10-20PCs) without any segmentation - one LAN with one Gateway.
    1. If the Gateway is some small hardware device, there are not any problems to make FTP-connections from LAN to Internet FTP-servers
    2. If the Gateway is Win2003+RRAS+NAT or Win2003+ISA2005, there are not any problems to make FTP-connections from LAN to Internet FTP-servers
    3. But if the gateway is Win2008+RAS+NAT or Win2012+RRAS+NAT, the computers in the LAN are not able to connect to Internet FTP-servers
    I made a few tests:
    1. On Win2012+RRAS+NAT
    TurnOff Windows Firewall for All profiles (Domain, Private, Public) - the problem disappears, it it possible to connect to external Internet FTP-servers.
    2. On Win2012+RRAS+NAT
    TurnOff Windows Firewall only for Domain profile - the problem disappears, it it possible to connect to Internet FTP-servers.
    3. On Win2012+RRAS+NAT
    TurnOn Windows Firewall for All profiles (Domain, Private, Public)
    But I excluded the Internal NIC in this list
    Windows Firewall / Properties / Domain Profile / Protected network connections 
    and the problem disappears again
    My question is:
    What new Firewall rule  I have to make and where to place it (to be able to make FTP-connection from LAN to Internet FTP-servers)?
    I made some attempts to allow port21, but any success.

    Thank you, but did you try this ? 
    Can you describe in detail "exclusion rule for FTP traffic" ?!
    In my previous post, I want to say that if you use Win 2008/2012 RAS+NAT as a network gateway, than it is not possible to make FTP-connections to external FTP servers from the computers behind that gateway.
    And the standard attempts to make "Allow"-rules for port 21 in the gateway firewall (Win 2008/2012), do not solve the problem.
    No matter which FTP-client you can try to use.
    To see this problem, just make few simple tests: 
    ">telnet <ftp-server> 21" 
    with firewall on/off  and inbound/outbound "Allow port 21 rule (All/Domain/Private/Public)"
    In my country, the Government Tax Department uses FTP-protocol to collect monthly data from companies. 
    And it is too stupid scenario (to be a small company and to) upgrade from Win 2003 to a newer 2008/2012 and than to not be able to make all your jobs.
    -------EDIT---------
    The same problem (and its solution) is described here:
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/0c68aed6-e22b-4cd4-86bd-f3c767e88349/advanced-firewall-blocking-through-ftp-traffic-rras
    The magic command:
    ">netsh routing ip nat delete ftp"
    solved the problem for me.
    And here is the description of this command - "Disables the FTP proxy on the NAT server."
    http://technet.microsoft.com/en-us/library/cc754535(v=ws.10).aspx#BKMK_106

  • FTP Connectivity Problem

    Hi guys,
    I am still muddling around with my initial configuration of the ACS solution engine 4.1
    I was trying to install the "Generate the Self-Signed Certificate" but unfortunately when i enter the FTP hosts ip and a username/login followed by the "/" directory.
    An error saying verify FTP username/password comes up. On a win2003 server i installed IIS and the FTP component.. and set the ip as 10.c.a.b for the default ftp site. and have been trying to connect to this from the acs box.
    Any suggestions as to why the error is cropping up?
    To complete the picture.. i have the Win2003 server and the ACS solution engine on the same switch as well.
    My ACS can also view all the groups in the AD and stuff, so i do know there is connectivity between the win2003 and acs box..
    please help :(

    hi andrew..thank you for ur help
    but i realised something really really stupid :) The ftp site and all were working from the command prompt.
    The only mistake was i forgot to add the domain name in the USERNAME section... i just kept trying with a user account from the AD .. but without adding the domain name.
    It works now :) Have the certificate installed... now i need to figure out, how to get Dynamic Vlans and get DHCP service working for each of these dynamic vlans
    have u worked on the ACS 4.0 soln engine b4?

  • Delete file from an FTP folder

    Hi expert,
    I wanna know if it's possible delete with abap command a file from a FTP folder.
    I mean, there is a ftp folder periodically filled with excel files. An ABAP program read this folder and the files content must be moved in a SAP Table. Aftre this, I must delete excel files with an abap command write in the same abap program.
    Thanks a lot
    Michele Garofalo

    1) read directory with fm EPS_GET_DIRECTORY_LISTING
    2) process table dir_list
    and 3) finally delete files with
    abap command:  DELETE DATASET dsn.
    hope that helps
    Andreas

  • Delete file from FTP server

    Hi All, 
    I have a requirement where I need to delete a file from the FTP server. How do I do that?
    Thanks in Advance.
    Regards
    Jaspreet

    Hi,
    refer this link,
    [ABAP solution to implement FTP transactions |http://wiki.sdn.sap.com/wiki/display/Snippets/ABAPsolutiontoimplementFTP+transactions]
    Regards,
    Vijay

  • How to ASR 9k auto backup to external FTP server

    How to take auto  running configuration backup when use commit command in asr9k  .Our asr9k sofware Version 4.0.1[Default] .I usse the commands
    ftp client password encrypted 050D121F345F4B1B4
    ftp client username cisco
    ftp client source-interface GigabitEthernet0/0/0/14
    ftp client anonymous-password cisco
    (Password information changed)
    configuration commit auto-save filename ftp://10.10.10.3/ASR9K/asr_conf
    But auto backup not happening .following errror showing after every COMMIT command.
    ( Error:Couldn't save file /ftp://10.10.10.3/ASR9k/asr_conf.
    Error:'CfgMgr' detected the 'warning' condition 'Operation is temporarily suspended.' )
    Manually I able to take Running-configuration backup through ftp int same lacation (
    ftp://10.10.10.3/ASR9K/asr_conf ) .But automatically not happening .Please help .

    I have not personally seen this issue before but you may find verifying your config helpful.
    SUMMARY STEPS
    1. configure
    2. show running-config
    3. describe hostname hostname
    4. end
    5. show sysdb trace verification shared-plane | include path
    6. show sysdb trace verification location node-id
    7. show cfgmgr trace  
    8. show configuration history commit
    9. show configuration commit changes {last | since | commit-id}
    10. show config failed startup
    11. cfs check --> Verifies the Configuration File System (CFS)
    However I did notice the following:
    Error:Couldn't save file /ftp://10.10.10.3/ASR9k/asr_conf.  Notice the preceeding '/'?
    Thanks

  • How can i do scheduled automatic backups to an ftp server in ios xr?

    Hello guys! As the title says im looking forward to automatically back up my running config on a cisco CRS-1 to an FTP server. I was only able to find this config example:
    Configuration commit auto-save filename ftp://A.B.C.D/myconfig.txt
    This allows me to save my config to an ftp server everytime i use commit on the device. Now i want to know if there's a way to automatically save my configs everyday at 00:00  and also include the date and time in the name of the file so i don't overwrite the existing files in the ftp server.
    I dont want to use any tool i just wanna know if what im asking is possible via CLI commands. I would greatly appreciate your help with this subject.
    Regards,
    David

    Not sure if this script will work on a CRS, but try this:
    archive
    log config
    logging enable
    hidekeys
    path tftp:///$h-
    write-memory
    time-period 10080
    Explaination: 
    There are two ways to save your config to your remote station:
    1.  When someone saves the config; and
    2.  At an alloted time period, expressed in 10080 (weekly for me). 

  • Error when scheduling WEBI report to FTP server

    Hi
    We are getting error "destination directory error. CrystalEnterprise.Ftp: 550 Requested action not taken" while scheduling WEBI report to FTP server.
    Any help would be appreciated
    Regards,
    Anisa

    Hi All,
    I want a run my report once by scheduling, so i provide a time interval for scheduling a report
    start date/ time : 11:38:AM 10/30/2011
    end date/time : 11:43:AM 10/30/2011
    after completion of end time....report is failed and fetching an error
    Error : Object could not be scheduled within the specified time Interval
    Any solution for resolving this error

  • Error while FTP ing BI Publisher Report

    The following Error is occured while FTPing a BI publisher report. The scheduling was running fine for the lase 1 year .But this error is occuring in production schedule of the ftp for the last 2 days.When I do the FTP by 'Run Immediately' manually it works fine.
    oracle.apps.xdo.servlet.scheduler.ProcessingException: [ID:4621] Document file to deliver not found : /u01b/obiee/OracleBI/oc4j_bi/j2ee/home/applications/xmlpserver/xmlpserver/xdo/cache/xmlp7057786.tmp
         at oracle.apps.xdo.servlet.scheduler.XDOJob.deliver(XDOJob.java:1131)
         at oracle.apps.xdo.servlet.scheduler.XDOJob.execute(XDOJob.java:478)
         at org.quartz.core.JobRunShell.run(JobRunShell.java:195)
         at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:520)

    Duplicate post.
    Error is occured while FTPing a BI publisher report
    Error is occured while FTPing a BI publisher report
    "BI Publisher" is the appropriate forum for such questions.
    Thanks,
    Hussein

Maybe you are looking for

  • Setting Isolation Level In A UserTransaction

    We are having a problem where a class creates a UserTransaction from the InitialContext, but does not see any database changes made by other EJBs even though they have been committed. This "seems" like an isolation issue. What is the default isolatio

  • Inventory cube load: can I use full load?

    hi, I have an inventory cube with non-cumolative chars. Can I use full load option or I thave to load with delta for non-cumulative KFs? Regards, Andrzej

  • Issue with trigger, multi-table insert and error logging

    I find that if I try to perform a multi-table insert with error logging on a table that has a trigger, then some constraint violations result in an exception being raised as well as logged: <pre> SQL> select * from v$version; BANNER Oracle Database 1

  • Check MyBestBuy Eligibility status

    Hello, I am trying to find where you can check online your current eligibility status for being an elite or elite plus member for the upcoming year.  It used to be really easy to find, being on almost every page you looked at, and now it doesn't seem

  • I have to update but none of the merge functions is working for me

    Hi, I have a table PERSON with the columns ID, NAME and SALUTATION_ID and I have a second table SALUTATION with the columns ID and NAME. I have the following person in my PERSON table (ID=1, NAME=Tobias, SALUTATION_ID=1). Now what I want to do is cha