QIP-7100 vs QIP-6200 No widget button?

Hi
Does the older receiver have a widget button on the remote?
What is the difference between the 2 models?  I know the 7100 is the newer version, but had heard bad things about it previously.
I am returning 1 cblbox.  Which should I keep, which should I return?

Hello,
All our remote controls have a widgets button.  If you do not happen to have a newer model remote that clearly specifies the Widgets button then it will be the "A" button on the remote.  Ususally the "A" button is a small yellow triangle.  This also holds true fot the newer model remotes that have widget button, the "A" button will also bring up the widgets. I hopes that answers your question concerning the remote control. 
Now as far as which model HD set top box is better, the 6200 or 7100. That decision can only be made by you.  We do not favor one over the other, but I will say that if anything were to ever happen in the future where your cable box needed to be replaced it will more then likely be replaced by a 7100. 
I hope I was able to help you in your decision. Let us know if you need further assistance. ^LS
Lori
Verizon Telecom
Fiber Solution Center
Notice: Content posted by Verizon employees is meant to be informational and does not supercede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or Plan. Follow us on Twitter™!

Similar Messages

  • QIP-7100 1 keeps turning off

    Hi.  I hope someone can help....  ever since the 1.9 software was downloaded to my two cable boxes, my two QIP 7100-1's randomly turn themselves off for no apparent reason. 
    I saw another forum entry on this and it was blamed on overheating.  These have no obstruction on them at all, and they worked for almost two years just perfectly BEFORE the 1.9 software was installed.  This turning off problem has only started since 1.9
    I have look everywhere in the setup menu for some kind of auto turn-off setting, but it doesn't exist.
    Do I now have defective boxes?  Do I need to get verizon to come out with two new boxes?
    Thanks!

    The boxes you have are not defective. Boxes are exhibiting this since the 1.9 update, some more frequent than others. The next patch update will address this.
    Anthony_VZ
    **If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
    Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan

  • How to connect JVC DVd player and video cassette recorder to QIP 7100 and Panasonic TC-32lx44

    What cables do I need to connect my DVD/VCR recorder through my QIP 7100 to see on my TV? I would appreciate any assistance with this since I am a novice.
    Thanks
    Solved!
    Go to Solution.

    You cannot run ANY signal through a Set top box to a Television. The only input on the boxes that is actually functional is the coaxial cable. The only way your are going to connect your DVD player to the TV is via one of the AV inputs on the Television itself.
    Hopefully your Television has at least 2 sets of AV inputs, because you are going to need them. 1 for the VCR and 1 for the DVD player.
    Depending upon the TV, VCR and DVD player, the connections possible are:
    1). HDMI cable from TV to DVD if the DVD player has HDMI and the TV has a 2nd HDMI input. It is very unlikely your VCR supports HDMI.
    2). Component Video (RGB) plus Audio AV cables from audio and component outputs on the DVD player to a set of component and coresponding audio inputs on the Television. It is unlikely that your VCR supports component video.
    3). S-VHS cable from DVD player or VCR  to S-VHS input on the TV (if there is one), and audio AV cables from the audio outputs on the DVD/VCR player to the corresponding audio input on the TV for the S-VHS cable. If S-VHS is not available, you can use composite video instead. HDMI and Component video will give you the best picture and composite video will give you the lowest quality picture, but depending upon the equipment, your VCR may not have an S-VHS output available.

  • Strange Issue With QIP 7100 STB and Sony Bravia TV

    I am having a strange issue with a 27" Sony Bravia Television connected to a Motorola QIP 7100 HD STB.When viewing a non HD channel the television input number display, resolution display, picture mode display and clock come on and off every few seconds. The issue stops when I tune in to an HD channel. If I return to a non HD channel the issue reappears. I am new to FIOS from Directv where I did not experience this. The television is connected to the STB via HDMI. Everything else seems fine except for picture stuttering that I am getting on all of televisions but I'll save that issue for a separate thread. I tried removing the TV remote to no avail and changing the batteries in both the FIOS and TV remote with no success either. This is a very annoying issue and I feel that it must be caused by the STB. I was wondering if anyone experienced anything similar to this and if they were able to correct the issue. I would greatly appreciate any assistance. Thank you and Happy New Year.   

    It is possible that your Sony doesn't support the mode the STB is set to for SD (some HDMI TV inputs don't support all formats that the STB can output).
    Have you tried going to the STB settings menu and under Video Settings played with the various options for 4:3 override?  This setting controls the STB output for SD and lets you set 480i, 480p, and OFF (also STRETCH at least on some firmware version).  In the OFF setting the STB upconverts your SD to whatever the HD resolution is set for - 1080i or 720p.
    Hope that solves your issue.
    If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

  • QIP 7100 2 boxes constantly turning off

    I've got 2 QIP 7100 2 boxes
    they turn off constantly (go into standby)
    this messes with my DVR!
    I don't want verizon's DVR, i want my DVR to work. It would work great if the boxes would stay on for more than 30 minutes to 2 hours at a time. 
    What can be done?
    thanks

    The only I can suggest is to reboot the STB then go back in and check to make sure the sleep timer is set to never and see what happens.

  • QIP-7100 auto Power-On

    Hi!   Is there  way to make the QIP-7100 default to power-on when plugged in (or more appropriately when power is lost then restored)?
    Right now, if power is lost and then turned back on, the box comes back powered off.  I'd really like it to automatically turn back on.
    thanks

    srothwell wrote:
    Hi!   Is there  way to make the QIP-7100 default to power-on when plugged in (or more appropriately when power is lost then restored)?
    Right now, if power is lost and then turned back on, the box comes back powered off.  I'd really like it to automatically turn back on.
    thanks
    Simple answer - NO.
    If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

  • I am trying to include some widgets into my website through iweb.How to keep only the widget button on the homepage instead of the whole open widget?

    I found the HTML code for including the Facebook widget buttons on my webiste...now I also wanted to include some other widget so I looked at www.widgetbox.com....I can download the html code and once I put that on my webpage then I have the widget open. How can I only have the widget button instead? For example I wanted to have the weather widget, but only the button weather widget, as if it was on the iphone, so that user can click on it just if they want, but I couldn't manage to do it. Does anyone knows?

    Add an HTML snippet and put the code in it:
    Click to view full size
    OT

  • Shortening accordion widget buttons MUSE

    Hi guys
    I was wondering how to shorten the accordion widget buttons in muse. They seem unable to reduce below a certain width and I would like the left and right edges to be closer to my text/
    Any suggestion would be much appreciated.
    Cheers,
    - Coen

    Personally I would try the tabbed panel widget instead. Then you would have narrower links but they would be beside each other instead of on top of each other.
    Another option may be to go with no border and then add a similar graphic as i fill that is narrower and centered.

  • No Add to My Widgets Button

    When I am in widget browser and go into a details page of any widget, I don't have the Add to My Widgets button.  So therefore I can't download any widgets to Dreamweaver.  Any solutions?
    This was copied from another forum question.

    Sorry I don't have a solution for you.  You may get better help on this from the Widget Browser Forum
    http://forums.adobe.com/community/labs/widgetbrowser
    If you're on a Mac, see this tech note on AIR installation issues:
    http://kb2.adobe.com/cps/902/cpsid_90205.html
    Good luck!
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics | Print | Media  Specialists 
    http://alt-web.com/
    http://twitter.com/altweb

  • Widget button - can't get the nouseover to show it's a link

    On my site page here:
    http://www.collegefundrecords.com/CollegeFundRecords/Music.html
    I have several widget buttons. They work, in that when pressed they take me to the links correctly, but when users mouse over them, the cursor doesn't respond (the buttons look dead). Here's my widget code:
    <form id="button-loads-file-url" action="http://collegefundrecords.com/xpreview_files/Ozone_PREVIEW_WEB_LOW_RESOLUTION80bps.mp3", target="_blank">
    <input type="submit" value="Preview">
    </form>
    Any tips on getting a mouseover to work?
    Thanks!

    Thanks guys. I'm sorry for getting huffy. It's just that when I've tried all I can afford to try and get a "Google it" response, it rubs me the wrong way. Perhaps a knee-jerk response - in many ways I hate the internet for mis-reading communication.
    I always try to help myself first, THEN ask for help. I also always post any solutions I find so other people can "Google it".
    I understand that web code is a specialized profession, where people get paid to solve problems. I didn't think I was crossing the line in asking for a mouseover, but perhaps I was. My day job is a specialized field too, so I get it.
    In this case, I realize I've been fixated on having a button there, where a simple text hyperlink will do just as well and eliminate any browser issues (I hope). I don't know why I was hung up on having button.
    Thanks for the responses & help. Sorry for the aggravation!

  • IR Extender for QIP-7100 (-1 and -2)

    Hey Everyone
    I see posts about IR extenders across the boards, but no working links
    Does anyone know where I can obtain these IR extenders?  I have two boxes and I'm getting killed with IR Repeaters, they just aren't the same.
    I bought an IR receiver from monoprXXX.com [advertizement removed ;-) ], someone had reviewed that it works with the 7100, but it doesn't.   After contacting their support, they clearly said the review should have been dropped b/c its not true :/   ...they're great are RMAing the unit.
    ~Todd

    I got one from Amazon that works with my 7232 and the reviews say it works with the 7100s.
    http://www.amazon.com/Infrared-Receiver-Extender-Description-Compatibility/dp/B002JSDHCY/ref=sr_1_1?...
    Dave

  • Motorola HD QIP 7100 1 with Viera Link?

    Will my current STB work with Viera Link or Pioneer's Control with HDMI?
    I'm hoping to connect the STB with high-speed HDMI through a new Pioneer AVR, then on to my Panasonic plasma.

    Doesn't support hdmi control (CEC).  Viera link is just Panasonics name for CEC.  Still works otherwise.  Volume control on the remotes are normally set to control the TV's volume, and depending on how you hookup that should control your Pioneer's volume via your cec from your TV to your AV.

  • Widget button

    I try find information over widget have looked at help file and web but can not find any dirrection
    i have button create with actionscript in widget code and it works as i want I would like to change button name
    by putting text in widget parameters as have no access to flash in my work only captivate any example of this ? I tried code from help file but unsuccessful as can not show text in parameter

    Take a look at the stock Certificate Widget supplied by Adobe. That one has the code framework to handle the passing of variables between Captivate (in the widget parameters tab) and Flash. That widget passes the "Course name", which the user is required to enter in the widget parameters so you could take that code and use it for your purpose.
    /Michael
    Click here to visit the www.captivate4.com blog

  • Widget/Button image

    Hello,
    I have a problem with Button Widget. I decided to insert a rollover slidelet and on this slidelet I would like to have a button. The only way to insert button is to insert Widget and than select a button. I did it and now I would like to change the layout/view/image whatever u name it. Instead of it I have sth like this:
    I don't fully understand what does published folder mean.
    I hope u understad all

    Hello,
    If you do not like the images already provided with the Button widget, you can choose your image. But when publishing the CP-file to SWF (with its companion files HTML and JS) you will have to add the button image file to the same folder and upload all files in the folder to the LMS. The path to this button is a relative path.
    Lilybiri

  • Accordion widget buttons not hot all the way across

    I have discovered that the accordion buttons are not hot all the way across. They are only clickable on the right and left sides with a dead spot in the middle. Is this a setting or a bug?

    I figured out the problem, actually. It's that I have the Course Companion
    Widget on all my screens and it's laying on top of the widget. I didn't
    know it could block the interactivity. I thought it ran in the background,
    basically. So I have to make it smaller and move it off to the side to keep
    it from blocking the buttons.
    Thanks for your response!
    Tianna Tagami, M.Ed.
    Learner Experience and Evaluation Designer
    (617) 863-6401 (m) | 206-426-5701 (f)
    tianna.tagami (skype) | www.linkedin.com/in/tiannatagami
    <http://www.savvyeducation.com

Maybe you are looking for