QLF (Qualifier) Field in Sales Order
Hi,
Can anyone please tell me the significance of the field QLF (Qualifier) in the Sales Order is or what it is used for?This field can be found next to Item Category in the AFS Item Overview Tab. I havent found much information on this and would appreciate any feedback.
Thank you
Amalie
This field does not exist in standard SD and seems to be specific to the AFS module. I don't think you'll get many replies in this forum.
Try a forum specific to this industry solution or ASUG instead. Or find the field's name and then use 'where-used' button in Dictionary (SE11), maybe the code will make some sense to you.
Similar Messages
-
Need to copy a custom field from sales order to billing document
Hi All,
I have a requirement, I need to add a new field in the sales order header part and even a field in the billing document, once i add this field up in both the documents in the header part i need to create a copy routine using the VOFM tran, can any body help me on what's the procedure to add a field in billing document and does the copy routine transfer the data ( Custom Field ) from Sales Order to the Billing Document, if yes can somebody help me with the procedure on how to and code of it.
solved it myself ....
Regards.
Message was edited by: seshi
seshiHello,
Regarding item 1, is it in the region of the global links (ie logout, home, preferences, etc.)? If not, have you tried creating a link via personalizations to the region you wish to have the link displayed (item type = link, destination = fully qualified name of your .xml page/region?
Regarding item 2, you may have to create the custom subtab programatically using the controller for the region of the current subtab layout.
Regarding item 3, you can also add a submit button to the page button bar region via personalizations. You can then add any logic you want to the button in the controller for the page.
Hope this helps. -
Customer wants to see Discount Field and Quantity field in Sales order Form
Hi Gurus,
Highly appreciate if you provide the solution for below issue:
My customer requirement is to see Discount field in sales order lines screen...They want to know how much percentage of discount they are giving to customer, if they want to modify for respective line they modify in that field.
Standard functionality discount field is NOT there in SO lines for because they manual enter discount in SO form, system should calculate Discounted price.
One more required if they enter Item code, able to see available quantity bottom of the form Sub inventory wise, Availability, resealable.
Current standard functionality supports - Click Availability button to check the availability..Its very difficult for them to check for each and every line item, is there any functionality to support this issue.
Thanks
SattiHi,
Both of your requirements should be customised.
There is no standard functionality which attains your requirements.
For my present project, we have customised 2 seperate reports, one which shows the availability of the items in subinventory and locator.
Also a report which shows discount for all the lines and for the entire order.
Thanks
-Arif. -
HI,
How to add additional fields in sales order in additional data tabHi ..
Hope this link helps you.
Link: [Additioanl tab enhancement|https://forums.sdn.sap.com/search.jspa?threadID=&q=salesorderadditional+tab&objID=f233]
Thanks,
Naveen.I -
Create a new field in sales order
HI folks i want to create a new field in sales order item level how can i create
Hi,
Hope this will help you,
User exits in the screens
Additional header data is on screen SAPMV45A 0309, additional item data on screen SAPMV45A 0459. These screens contain the Include screens SAPMV45A 8309 or SAPMV45A 8459 as user exits.
Fields which are also to be included in the sales document for a specific installation should be included on the Include screens for maintaining. If an application-specific check module is needed for the fields, this can be included in the Include MV45AIZZ. The module is called up in the processing logic of the Include screens.
For field transports, you do not have to make changes or adjustments.
Example
A new field, VBAK-ZZKUN, should be included in table VBAK.
If the check is defined via the Dictionary (fixed values or check table) the field must be included with the fullscreen editor in the Include screen SAPMV45A 8309. In this case, no change has to be made to the processing logic. -
Is Lot Status available to select as a field in Sales Order Reservation form field?
Material Status is available only
hi
Follow the below steps.
T-Code SE51(Screen Painter)
Give Program Name SAPMV45A (before doing this confirm from the field from sales order, keep curcer on the pricing date press F1 and then select technical details)
Screen Number 4440(before doing this confirm from the field from sales order, keep curcer on the pricing date press F1 and then select technical details)
Select Attributes radio button.
Go to Element list Tab. Inturn select Special Attribute tab in Subscreen.
For Field Name "VBKD-PRSDT" make Input as "OUTPUT" (DISPLAY).
Hope this will help you -
Cost centre field in sales order account assignment screen
Hello all,
I am unable to find the settings for cost center field in sales order account assignment tab screen along with profit center and internal order. kindly let me know the path to select cost center.
Thanks in advance
RajuThe Cost Center Determination settings is in OVF3 - but there are some cases where the Cost Center must be exceptionally changed.
If the document category for order type in IMG VOV8 is defined to be "I" which belong to order type FD - Deliv.Free of Charge, then the field cost center is active for input during transaction VA01.
Alternatively, you can specify an order reason and assign a cost center to an order reason.
However the standard SAP works only at the header level though, so it would not work if cost center is needed on the line item.
The cost center are assign for such business transactions as :
- Free deliveries
- Returns
- Deliveries of advertising materials
You can also make cost center allocation dependent on the order reason, for example:
Order reason: Damage in transit
Order reason: Free sample
Both the IMG settings are done in transaction OVF3, either with/without the order reason. -
Can we edit Gross Price field in Sales Order
Hi experts,
According Help document (help - under Sales A/R/Sales Order-Sales document content tab ) as follows, userwe should be able to edit gross price field in Sales order
Enter in this field the unit price including tax. SAP Business One calculates automatically the unit price before tax and the tax amount, based on the tax code in the row. After pressing the TAB key, the Unit Price field and the Tax/Unit field are updated accordingly.
The tax amount is calculated as follows:
*Gross Price / (1 + Tax %) * Tax % = Tax Amount*
But when I set up in form setting visible and active for Gross Price, though I AM NOT ABLE TO EDIT GROSS PRICE FIELD
Is it bug in SAP ? I
BR
Samir GandhiHi Samir Gandhi,
You may check SAP Note Number: 1060666 to see if it applies to you.
Thanks,
Gordon -
How to add a field in sales order
Dear All,
First I created a ZTable in which there are 15 fields exist then I append structure in ZVBAP which contain only one field from this ZTable. Now I place this field in the Subscreen 8459 of Sales Order under "Additional Data B" by using access key. Also i have Access to edit the module MV45AFZZ.
Then I wote the code in the
FORM userexit_save_document_prepare.
IF XVBAP-ZZSPENR = ''.
MESSAGE 'SPECIFICATION NO. IS NOT SPECIFIED' TYPE 'E'.
ELSE.
VBAP-ZZSPENR = ZSPEC-ZSPENR.
ENDIF.
ENDFORM.
so that while saving it Checks that field in screen and then if it has value then save it to in the VBAP Table.
I think I have to write the code into the module
FORM userexit_move_field_to_vbap.
VBAP-zzfield = xxxx-zzfield2.
*{ INSERT ID3K908846 1
DATA: zlgort LIKE vbap-lgort.
IF vbap-pstyv EQ 'ZWP'.
CHECK vbap-lgort IS INITIAL.
GET PARAMETER ID 'LAG' FIELD zlgort.
vbap-lgort = zlgort.
ENDIF.
*} INSERT
WA_XVBAP-ZZSPENR = xvbap-zzspenr. "but this line gives * me error cause I have to move the screen fields into * the VBAP Table. So that after this it checks in internal table XVBAP that the field ZZSPENR has value or not ?
ENDFORM.
But when I checks XVBAP TAble it shows all entries that I fill in Sales Order except ZZSPENR (My Field)
Thanks in advance.
Regards.
Adams.
Helpful answer will be appretiated.hi Amams
check this link
Adding Fields to Sales order
i think it may give u some idea
Regards,
Naveen -
How to add three fields in Sales order item level and supress/hide many
Hi Gurus,
My client requirement is :
1. Three fields to be added at Sales order Item level and they should flow till billing.
2. Supress/hide most of the fields in Sales order, so that end user will be happy( thru SHDO how to do)
Please share your experiences and help me.
BEST REGARDS
SrikanthHi Subba Rao
in VA01 screen - Material /qty/ after entering this client wants to enter three more details say X/Y/Z
and after that he dont want to see maximum fields displayed in VA01 Screen.
I think it makes sense.
Regards
Srikanth -
How to make a field in sales order a required field
Hi,
How do i make a certain field in sales order a required field. I want to make the assignment field in accounting tab a required field. How do i configure this.
Thank you.
RachelleIn you know the Transaction and screen Variant Configurations.
Use T-code SHD0
Put your Sales Order t-code There : Va01
Then Select the feilds or tabs whatever you want as mandatory , optional.
Customize as per your requirement and save the variant.
Next GO to the Sales Document types :
There In the Transaction flow you will find at variant feild.
Assign this variant there.
Next when ever you do sales Order for that Document type the feilds will be taken in the fashion of the variant.
regards,
SAP SD -
How to make a field in Sales order as Display
Hi Friends,
I want to make the field pricing date in sales order as display only. Currently the field is changeable.
Can someone please tell me how can i do this.
Regards,
Wasim.hi
Follow the below steps.
T-Code SE51(Screen Painter)
Give Program Name SAPMV45A (before doing this confirm from the field from sales order, keep curcer on the pricing date press F1 and then select technical details)
Screen Number 4440(before doing this confirm from the field from sales order, keep curcer on the pricing date press F1 and then select technical details)
Select Attributes radio button.
Go to Element list Tab. Inturn select Special Attribute tab in Subscreen.
For Field Name "VBKD-PRSDT" make Input as "OUTPUT" (DISPLAY).
Hope this will help you -
Profit center mandatory field in sales order !
Hi All !
How to make profit center mandatory field in sale order can any body let me know...
Thanks & Rgds
NaveenHi
You can either Transaction variant SHD0/User exit
Refer below<a href="http://www.sap-img.com/sap-sd/supressing-fields-in-sale-order.htm">Fields in Sale Order</a>
help required: how to makes sales office field mandatory, in inquiry and qu
Re: supress some fiels in sales order? user exit?
Message was edited by:
SHESAGIRI.G -
Excise CIN amounts not updated in TAX field in Sales Order Pricing
Hi,
I am not getting the Excise Amount [CIN] i.e BED + ECS + SHE Cess in Tax field of Sales Order Pricing Procedure. only Sales Tax amount is showing.
Plz let me know, where did I go wrong in the Configuration.
Thanx in advance.
with best regards
JabbarAbdul,
What you have said is correct with regards to condition record creation, excise rate picking and its calculation.
On clicking the "analysis" button in pricing screen (Sales item details --> condition -->) try to analyse for each condition type
we can resolve it
Check within the condition type whether you have entered condition category = D, it must be like this
Cond. class = D Taxes
Calculat.type = A Percentage
Cond.category = D Tax
In Pricing Procedure Activate "Statistical" Indicator, it will definitely appear in the tax field.
Regards
Sathya -
Want to pass STRS2 field into sales order and contract.
Hi Friends.
I am creating Sales order using function module IDOC_INPUT_ORDERS and Contract using SD_SALESDOCUMENT_CREATE.
Now I want to pass STRS2(House number field into Sales Order/Contract). In IDOC I tried to pass E1EDKA1-STRS2, but its not coming into Sales order output.But SD_SALESDOCUMENT_CREATE dont have an option to pass the field value.
So in that case how can I achieve the desired functionality, Is there any user exit or let me know the suitable method to achieve the functionality.
Thanks
GowrishankarYes I tried that also.I passed the value from program to user exit MV45AFZZ and updated the structure XVBADR in USEREXIT_SAVE_DOCUMENT_PREPARE, but its not getting reflected in Sales Order/Contract.
Anyone have suggestion..plz let me know.
Thanks
Gowrishankar
Maybe you are looking for
-
Jnlp-launch consumes too much time to operate
Hello all! I want to discuss the UX we have using jnlp launch in JavaFX. You can find jira-discussion here: http://javafx-jira.kenai.com/browse/RT-14930 As you can see, it was recognized as major bug. What's wrong with jnlp-start? 1. When user launch
-
Hi All, Got struck with a issue. please help me out in this. I need to check the duplication of invoice when i post a document in F-42. It also a country specific as well. so can anyone pls suggest me which method i can use and how to use it. I apper
-
SubFolders and Folders in Librar View
When I look the the Library, all the pictures appears "Flat" even the subfolder' one. Is it possible to see the subfolder inside the folders like with bridge ? PS: Sorry for my english...
-
Hi, I have registered an invoice (with an asset) in MM with T-code MIRO, after that I canceled it with T-code MR8M. After cancellation an amount of 0,01EURO remain, which is posted only on depreciation area 05 (the other depreciation areas 15,20, 21,
-
Adding fields in idoc segments
Hi, How do I add an extra field in an idoc segment. can we add a customer append inside it. Regards, Vijay