QM about the Inspection Points

Hello everyone, I have create the inspection points in the process of the material incoming inspection. BUT, now our Data Entry input worry information in the inspection points. SO, how can i delete this point ?
I looking forward to your answer, thank you very much~~!

once create point you cont  do any thing  remove inspection point  in routing or receipe then create  production order or process order  then you wont get the  inspection point in results recording

Similar Messages

  • About the 3rd point of my question

    Yesterday I posted my question here. And one said that the 3rd point of my question is not so clear. I am sorry. And I repeated it here.
    In many cases it is interesting to know where a particular point in the image space moves in the course of time series. So, what I would like to do is:
    The images are arraged in a virtual space, where the z direction is the time axis. one can examine the whole image series by sliding the viewing slice up and down the z direction ( this is what I mean last time in the 3rd point.) :)
    Can I realize this function using JAVA 3D?
    Many thanks.
    tony

    So you have a whole series of images, and you'd like to stack them ontop of each other to represent the image changing over time? Shouldn't be too difficult, you'd just use something like a mouse behaviour to zoom the view via the mouse. And if you wanted to get a smoother transition you could alter the images transparency depending on the position of the camera.

  • About the "Registry point"?

    Hi to everyone!
    How can i change the registry point of and object?
    I dont mean the pivot, i mean the "registry point".
    When i want to center an object to the perfect center, if i put 50%, this count since the upper left corner, and adds all the height and width of the same object. I want to count since the center of the object.
    How can i do this? Somebody can help me, please? Thnx a lot.

    since any div is a rectangle or a square I suppose you can calculate the coordinate of the center like this:
    the x axis would be at 1/2 width
    and the y axis at 1/2 height.
    var xAxis = 400/2;
    var yAxis = 300/2;
    so the registry point would be at (xAxis, yAxis)
    Therefore if you wanted to center the element  400 x 300 according to a stage that is 500 x 400 and the center point you could use this:
    var xAxis = 400/2;
    var yAxis = 300/2;
    var xPos = (500/2 - xAxis);
    var yPos = (400/2 - yAxis);
    sym.$('Rectangle').css({
         left: xPos,
         top: yPos
    You could generalize this by getting the height of the stage and the height of your element as well as the width of your stage and the owidth of your element and apply the formula.
    var elementHeight = sym.$('Rectangle').height();
    var elementWidth = sym.$('Rectangle').width();
    var stageHeight = sym.$('Stage').height();
    var stageWidth = sym.$('Stage').width();
    sym.$('Rectangle').css({
         'left': stageWidth/2-elementWidth/2,
         'top': stageHeight/2-elementHeight/2
    Here is the file with 2 different elements, a rectangle and an ellipse being centered on the stage according to their registration point which is in this case the middle of the element.
    https://www.box.com/s/79oh194blyk45wjcvw74
    If you wanted to center the element according to its origin, then it would be different.
    Hope this helps.

  • Can somebody give me a good explanation about the exclamation points?

    I would really like to know why they show up suddenly, wnen nothing has been done to change anything except to sync the ipod.
    So many of my songs suddenly get the excl. point, and I can't locate them on hard drive (know they must be there, just not computer savvy enough to locate them), but they still show up on my ipod and play without any problem.
    Where might I find them? (when I answer yes to do you want to locate the file, it doesn't really help much).
    When I do actually find the file, what can I do to remove the excl. point so that I can edit title or artist, etc.?
    I'm just really curious as to why, for seemingly no reason, the excl. point just suddenly appears.
    Thanks,
    Sue

    The ! next to the songs can mean several things. The files have been moved from the iTunes music folder, or deleted from your computer entirely. Or the song files have been renamed/edited or otherwise changed by some method other than iTunes. Or they are on an ext hd which may at some point become disconnected or powered off. In any event, iTunes has lost track of these song files. If it's none of these things that's causing your issue, then I have no explanation.
    You can use Explorer to search your computer for missing songs.
    On the Start menu, click "Search".
    Select "All Files and folders".
    In the "All or part of the file name" field, type the song name and then click "Search".
    If you see the file you are looking for in the Search Results window, you can add it back into your iTunes library.
    See: How to add songs from your hard drive to iTunes.

  • Spend more 3500 a year - what about the excess points?

    Hi, 
    I'm a eliteplus member and have spent more than 3500 in this year. My question is, will the excess money be added to the next calendar year, or will it be reset on Jan 1 2016?
    Thanks for answering!!!
    Solved!
    Go to Solution.

    Hello again roshinichi,
    I hope that you are enjoying your Wednesday morning so far.
    I pulled up your My Best Buy™ account and can see that you have already requalified for Elite Plus status during the 2015 calendar year.  When it comes to qualifying for Elite or Elite Plus status an eligible Best Buy purchase would only count towards the calendar year in which it was processed, and any amount spent over the required $1,500 (Elite) or $3,500 (Elite Plus) would not carry over to the following calendar year.  Your spending total would reset to $0 on January 1st.
    As I mentioned in my response yesterday, please feel free to send me a private message if you have any other questions about the My Best Buy™ program or your account.  I am always more than happy to help.  You can send a private message by clicking on the blue button in my signature that is labeled "Private Message."
    Thank you for reaching out to us on the forum and congratulations on requalifying for Elite Plus status!
    Derek|Social Media Specialist | Best Buy® Corporate
     Private Message

  • Everytime I start time machine, my computer backs up +/- 250MB, then freezes.  Tried it with 3 different external drives, all stop at about the same point (they all work fine on other macs). Any suggestions?

         The drives I have are Seagate 1TB GoFlex portable drives (one has UBS 3.0, the other USB 2.0), and a WesternDigital 1TB passport (USB 3.0).  I originally tried to backup with Time Machine using the Seagate USB 3.0, and when that didnt work, Seagate suggested maybe since my operating system is a little older, that I try with a USB 2.0, so they sent me another NEW external hard drive, with the USB 2.0.  Had the same issue.  Frustrated and convinced that Seagate just  sucked, I went and bought the 1TB WesternDigital passport (USB 3.0).  Have the exact same issue again.  Every drive was new, and formatted for mac.  When I started time machine it started to back up my files, but froze after copying give or take 250 MB (usually 252.5MB, to be exact).  I went and tried the drive on several other macs, and none of them presented any problems.  I also tried dragging individual files, but it still freezes on pretty much anything bigger than +/- 100MB.  Disk Utility says that all the drives are fine. Obviously this is a problem with my computer, and not the 3 brand new external drives.  I thought about upgrading to OSX 10.6, but don't know if this'll help or not (plus, I'd really prefer to have all the files backed up on a drive before doing that, just in case).  I dont know what else to do.. called apple, but I'm not about to pay them $50 to have them MAYBE give me a solution (done that twice now for previous unrelated issues, and each time they just told me to take it to a computer repair place.)  Just seeing if anyone out there has a solution before I cave and take it back to the certified computer guys for them to figure it out.. Also, I live in Montana and theres no apple store anywhere close (not suprising), so taking it to an Apple Store is just not an option.
    Side note:  Seagate tech support is awesome; they tried everything to solve the problem, and they even bent their rules a little to send me a new drive, even though it wasn't a malfunction issue with their drive.  Really helpful, friendly people, which is much more than I can say for Apple at this point...

    this is what you need to do to exclude everything apart from desktop.
    on time machine preferences, click on Options
    click plus sign, on the new window, click macintosh HD
    do a Control + A then deselect users then click okay
    go to options again, plus sign, go to users, control +A then deselect your user account
    go to options again, plus sign, go to your user account, control + A, deselect desktop
    start the back up.

  • Curious about the way points may have once been given

    Were points once assigned in the past not according to solved or helpful answers, but simply according to the number of posts made? I'm asking this because I occasionally encounter someone with maybe, several bars, registered years ago, who seems almost completely helpless technically.

    So, conceivably, absent any negative points, someone could have gotten up to two bars, maybe even more, just on the basis of the number of points?
    Yes.
    Did this happen?
    Yes.
    Does this explain the contradiction I've sometimes noticed between the obvious lack of technical chops and number of bars for some members?
    Yes.
    What was the mechanism for voting on posts?
    Each member, according to their level, was given a certain number of votes to use daily and weekly. Members were allowed to vote on any post in Apple Discussions. Members were allowed to vote posts up or down and they were able to award individual posts up to five votes.
    The algorithms for point gains and losses through votes that were received were fairly opaque. I believe the wording was something like "A point may be gained or lost for every five positive or negative votes that post receives," so it wasn't always easy to predict how (or how many) votes on individual posts earned or cost points for that post.

  • Discussion: The usage of Inspection Points

    Hi Experts,
    Talking about the INSPECTION POINTS, what kind of usage could it be ?
    In some occasions,  it can be used as an sign that distinguish each delivery from the production line to the QM dept.
    How about any other way to use it?

    An inspection point is an identifiable record of inspection results that is assigned to a work or inspection operation. Several inspection points can be assigned to an inspection operation.
    With inspection points, you can have several inspections and can record multiple sets of characteristic results for an operation.
    Inspection Points for Inspections During Production
    If you inspect during production using routings, rate routings or master recipes and you want to record inspection results in specific intervals, choose the inspection point type Free inspection points in production. You can define your own field combinations for this inspection type in Customizing.
    Inspection Points in Goods Receipt
    If you carry out goods receipt inspections with inspection points, choose the inspection point type Free inspection points in production. You can create your own field combinations for this inspection type in Customizing.
    Inspection Points in Plant Maintenance
    If you carry out calibration inspections and want to record inspection results for equipment or functional locations, choose the inspection point type for Equipment or Functional location. You can create your own field combinations for these inspection types in Customizing. However, the field Equipment or Functional location must exist in the field combination.
    Inspection Points in Sample Management
    If you use the sample management functions in a goods receipt inspection, or inspection during production with planned physical samples, each sample number is uniquely identified by an inspection point. Choose the inspection point type Physical sample. You can create your own field combinations for this inspection type in Customizing. However, the field Sample must exist in the field combination.

  • How come inspection points with DESTRUCTIVE MICs don't affect sample size?

    Hi guys,
    i have a case i tried on IDES and i need an explanation for it if you can.
    @ the beginning we have an in-process inspection with inspection points and non-destructive MICs, the interval of 10 mins (of the inspection point) generated 3 inspections, and my sampling procedure led to a sample size of 1 PC, in the inspection lot display the sample size is "1", which is normal and i understand this.
    here comes the problem
    we will change one of the MICs and make it destructive. Now we have our 3 inspections. The normal logic says that I'm having 3 inspections and there is on of the MICs DESTRUCTIVE, therefore I'm must get 3 samples, one for each inspection, which means that when we check the sample size in the inspection lot we must get a size of 3, but when i tried this i got a size of 1 again....and this is not logical because my sample will be destructed in the first inspection so how can I carry on the remaining 2 inspections ???
    so i need to know how come I'm getting a size of 1 and is that right or wrong ???
    i hope i made it clear and wish you can help
    Regards,
    Mahmoud Osama

    Hi Amol,
    i'm sorry i don't understand what do you mean by operation confirmation quality  ???
    and about stock posting, i know as you said that it is not possible with in-process inspection, as the lot is not stock relevant, but whether it is stock relevant or not has nothing to do with the sample size calculation, my problem is that the logic says that i must get 3 samples because with each inspection i'll destruct my sample, but SAP calculations give only one sample !!!!
    i hope you can help with that, thanks for you concern.
    Regards,
    Mahmoud Osama

  • CALIBRATION  WITH OUT GENERATING THE INSPECTION LOT

    Dear Friends,
    I am clear with the regular process of calibration  where  the inspection lot is generated for  equipment and result recording is done  and ud is given.
    But  my client doesn't want to any of result recording. He want to just maintain the  equipment schedule then send equipment to outside agency as per schedule  for  calibration. And  when  equipment is received back in he want to maintain the  history and  the next date should be triggered.
    I have already done following :
    IE01  >>> QDV1 >>> IP41  >>> IP10 >>> IP30 >>> IP24 >>>
    now if i check in IW32  the purchase requisition is not generated automatically, pl  help me in this regards,
    Thanks and with regards.
    Shekhar Mokashi

    hi
    if you don't want  inspection lot for the order then you need to maintain blank for  the inspection point in the task list then you don't get the task list.
    and if you want to generatethe external service PR through the operation then selct the control key PM03(service control key)
    then system ask you enter the vendor deatils and costelement purchase group etc.
    pl try
    ashok

  • QAPP_CUST_IP_F4 - inspection point help

    Two related questions here.  I haven't set this FM up before.
    One:  the FM mention table T_TQ79_F4_VALUES.  I can't find this table in our system.  Should this table be there? 
    Two:  The FM indicates that the table is index by the user field attribute which is a one character field.  The problem I see is that if I have multiple inspection point identifiers.  I.e. I create 901 and 902. In 901 I use the field number(size =3) as a shift number... 1, 2 or 3.  But in 902 I use the same field as an employee ID number.. 213, 418, etc...  How can I limit the help information for each IP identifier.  The user would be clueless as to the IP identifier being used.  For 901 I want the help to display "Enter the shift number that sample was taken on."  For 902 I want to enter "Enter the employee number of the person that took the sample."
    FF

    Yes.. we saw the defined structure.  But the module help specifically states to maintain the values in the table T_TQ79_F4_VALUES.  The values are then read into the structure from the table.
    We have already designed a Z-table should we need it.  But we try not to use a Z-tables if SAP has a provided solution.  We have submitted an OSS note to them on this.
    I just wanted to see if it was just us that was missing the table, or if others were missing it.  If it is missing, I'm wondering if any one has implemented this FM and if they all used Z-tables for storing their data or if SAP provided something.  I searched OSS already to no avail.
    In any case, SAP either needs to update their documentation for this process, or they need to provide the table that is mentioned.  Seems pretty clear that there is an SAP disconnect here.  I've pasted the help documentation from the SAP provided FM below.
    FF
    F4 - Help for the Inspection Point Fields                                    
    You can use this function module to specify input help (F4) for the user field for inspection point identification. 
    The function module serves as a copy model for user-defined programs. Note that the interface for user-defined programs must correspond to the interface for this function module.
    You must enter values for the specified user field in the table T_TQ79_F4_VALUES to offer a list of values for the user. You can enter an explanatory short text for each value.
    SAP determines the format for the possible values. This means that possible values are determined and exported based on the table. 
    For more information, see documentation on the individual parameters.

  • Inspection point in SAP QM

    Dear  Sir
    My query is related to SAP-QM
    1,How to define INSPECTION POINT in Inspection planning?
    2.Where is default setting of Inspection point like at Plant level & material level?
    3. If inspection point of material is changed in Tasklist and a new inspection lot is generated then it again reflect both the Inspection point (the new one & the old one).So how to aviod this problem so that it shows only the new inspection pont at the time of Result recoding.

    Hello Alpana,
    question 1 How to define INSPECTION POINT in Inspection planning?
    In the transaction QP01 or QP02 you can define an inspection point at header level.
    This can also be done for production plans and process instructions.
    The inspection point definition is done in the customizing of the Quality planning.
    question 2 Where is default setting of Inspection point like at Plant level
    This can be found under the customizing point Basic settings in QM.
    Using the settings at plant level it is possible to define inspection points at plant level.
    If you want to use the setting at material level then this would be done in the inspection plan.
    question 3 If inspection point of material is changed in Tasklist and a new inspection lot is generated then it again reflect both the Inspection point?
    The changing of inspection points is not possible (Inspection point definition)
    The changing of inspection points in inspection plans is not recommended create a new plan in this case.
    I hope that this information helps you resolve your issue.
    Regards
    Isabelle

  • Inspection Points for Inprocess Inspection

    Hi all,
    My client is doing In process Inspection during Production process.
    They are inspecting based on the Inspection Points (Shift wise).
    If I add Inspection point referrence at Header level in routing, after adding the MICs in the required operation, while saving it gives an error message stating that "Maintain Inspection Point referrence at Operation level".
    Task List contains error. You want to save or cancel.
    How can I achieve this with out error.
    Thnx in advance
    Sam

    Hi Sam,
    Go to Routing and select the operation, and double click the operation. Then system will popup the new screen here under Quality management Inspection point tab choose No relation. and save the routing.
    Check and give the feed back.
    Regards,
    S.Babusingh

  • Inspection Point at Operation Level

    In inspection plan of a material there are 2 operations.Out of these 2 operations, i want to assign inspection point only for 1 operation.and for 2nd operation i dont want inspection point.but as it is a header level data,i am not able to do it.so how can i do this?

    Hi
    Then by std method it is very difficult to achieve.This may need some enhancement in QP01/QE11/QF01.
    Here you have to make sure that for which operation you don't want Inspection point even if you have maintained in header of QP01.How will you differeciate this operation from other.
    May be you can try user exit :QAPP0001
    The user exit EXIT_SAPLQAPP_001 is called from module QAPP_IP_CREATE_1.
    This module is run through when you go into the create, change and
    display transactions for the results recordings. This is independent of
    whether the inspection point data screen is called up at a later time.
    Regards
    Sujit

  • How do I get the rotate tool to default locate the pivot point in the exact center of an object or group of objects?

    My new copy of CC has the default pivot point set to one side, rather than the center. I know I can manually move the pivot point around, but this is not always exact. Is there a way to have AI determine the exact center and then make this the default?

    s,
    We are not talking about the Reference Points in the Transform palette, are we?
    In any case, you may consider the list.
    The following is a general list of things you may try when the issue is not in a specific file, and when it is not caused by issues with opening a file from external media. You may have tried/done some of them already; 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
    If possible/applicable, you should save current artwork first, of course.
    1) Close down Illy and open again;
    2) Restart the computer (you may do that up to at least 5 times);
    3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
    4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible), for CS3 - CC you may find the folder here:
    https://helpx.adobe.com/illustrator/kb/preference-file-location-illustrator.html
    5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
    Even more seriously, you may:
    6) Uninstall (ticking the box to delete the preferences), run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
    http://www.adobe.com/support/contact/cscleanertool.html

Maybe you are looking for