QM Active or Not.. How to chk?

Hi
In a system how can i chk weather QM module active or not?
Weather are they using QM or not?
Wats their QM process?
How can we know the above from the system
Vijay

Hi
It is complete process. please check for the follwing details for a first hand answer to your query.
Quality view-  QM procurement active,Inspection set_ups, inside Inspect_up you will notice Inspection types attached to it , here you say what kind of inspection the material has to under go based upon the process. one material can have mulitple inspection types, forexample - 01 - for MIGO against PO, 08- for STO, simliarly a material which is having in_process inspection, can have 04- inpsection type, it goes on and can be set as required. This is only yhe basic check. On its own ths set_up alone will not help you to get the lot created during the processes. there are so many othere activities whch are to be carriedout for this to happen.
Pls check the below link forsome information
[Basics Of QM]
Regards

Similar Messages

  • On my iPad I have a working icloud that I have complete access to, but on my iPhone it keeps asking me for the password for it, but I do not know it! And the email that I used is not activated anymore! How do I delete the icloud account on my phone?

    On my iPad I have a working icloud that I have complete access to, but on my iPhone it keeps asking me for the password for it, but I do not know it! And the email that I used is not activated anymore! How do I delete the icloud account on my phone?

    Hi Aurion23,
    If you intend to keep using iCloud on your iPad, your best course of action would be to update your Apple ID/iCloud information so that you have a known password and it is associated with an active email address. You may find the following articles helpful:
    iCloud: Change your iCloud password
    http://support.apple.com/kb/ph2617
    Apple ID: Changing your Apple ID
    http://support.apple.com/kb/ht5621
    Regards,
    - Brenden

  • How do I turn off background ni file activity when not using Labview? files such as nimxs.exe, nipalsm.exe, nipalsm.exe, nisvcloc.exe, nicitdl5.exe

    How do I turn off background ni file activity when not using Labview? I use labview rarely, and I also use my computer for demanding multimedia applications, including multitrack digital audio recording. I need to reduce as much background activity as possible, and taking a look with task manager I see files such as nimxs.exe, nipalsm.exe, nipalsm.exe, nisvcloc.exe, and nicitdl5.exe running even when I haven't used Labview (8 I believe). These files run even after I right click the NI icon on the lower right and turn off the application. I would like the computer to boot up without these files, and for the necessary files to be activated only when I start the program.
    Can this be done or do I have to remove labview from the system to improve performance?
    Thanks

    Hello, those processes are part of running NI services that start when Windows boots.  These processes serve varied purposes and stopping them can have undefined and unknown consiquences for your NI products.  These products run at "normal" priority meaning that they should be preempted by any process running at a higher priority which I would expect your other application to be doing given their time sensitivity.  That being said, in Windows XP (I can't speak for other OSes), you can lower their priorities even greater through task manager (right click the process»set priority) to further remove them from contention for resources.  If you want to prevent them from running you can set the service startup type to "manual" in Control Panel»Administrative Tools»Services.  Right click the process go to Properties and Under the General tab choose Startup Type»Manual.  This will start up the processes only when something directly starts it up.  LabVIEW will start these processes up as it attempts to use them.  When you shut down LabVIEW you will need to manually shut down these processes through task manager.  Again, doing this can cause problems with your NI products on your system and it is not advised.
    Travis M
    LabVIEW R&D
    National Instruments

  • How to handle the exception in GP(Exception : Activity could not be read)

    Hi all
    we are getting the GP exceptions  as  1) "Activity could not be read"  2) "Action has been stopped"
    3) error while processing the item can not be displayed
    Please let me know how to handle these exceptions in GP .
    currently i got some documents in SDN on GP exceptions but those are related to manual exceptions for example if you enterd wrong data in the inputfield then we can handle those exceptions then it will allow to enter the new value but the exceptions which i mentioned above are new it seems
    can you please let me know how to handle or solve those 3 exceptions
    Thanks
    bindu

    Hi Shikhil
    Thanks for your reply
    Please have a look below for exceptions which i am getting in GP and let me know how to handle these exceptions.
    1) "Activity could not be read"
    2) "Action has been stopped"
    3) error while processing the item can not be displayed
    if you give any idea/clue how to handle these exceptions then it would be great help to me
    Thanks
    Sunil

  • How to find out whether USER-EXIT is active or not

    Hello!
    How can I  find out whether USER-EXIT is active or not ?
    I set a break-point at these points and nothing happens
    if I want save my daocument ???
    Why
    PERFORM USEREXIT_SAVE_DOCUMENT.
    PERFORM USEREXIT_SAVE_DOCUMENT_PREPARE.
    Ragards
    Ilhan

    Hi Ilhan
    The easiest way, I guess, is by going to transaction SMOD, sticking in your enhancement name and pressing the test button.
    When placing breakpoints, don't use <b>Breakpoints > Breakpoint at > Statement...</b> and enter
    PERFORM USEREXIT_SAVE_DOCUMENT
    because you won't get any hits since the function module names are stored dynamically.
    Rather use <b>Breakpoints > Breakpoint at > Function Module...</b> and enter
    USEREXIT_SAVE_DOCUMENT
    for a better chance of hitting the breakpoint.
    Cheers
    Lyal
    Message's terrible grammar was edited by:
            Lyal Schumann

  • How to check weather a material created is active or not

    Dear Friends
    1    How to check weather a material created is active or not.
    2  MIGO standard document has a check button, can we have similar check button in other documents like Purchase requisition.
    3   In case of material valuation is Standard (Price control), the costing is done on the basis of the Standard Price or actual cost of the raw material.
    I will be thankful for your advice.
    Sanjeev

    1 How to check weather a material created is active or not.
    There is a Blue "i" button for the Material, pls click that it will show you the current status..
    2 MIGO standard document has a check button, can we have similar check button in other documents like Purchase requisition.
    for PR you can see the check button( CtrlShiftF3) beside personal settings

  • CS6 on W7-64 worked fine since April 2013. After a general system update its activation is not recognized anymore. The activation key is suddenly invalid. I uninstalled the sofware and tried to reinstall. Failed. How to get my activation key valid again?

    CS6 on W7-64 worked fine since April 2013. After a general system update its activation is not recognized anymore. The activation key is suddenly invalid. I uninstalled the sofware and tried to reinstall. Failed. How to get my activation key valid again?

    Error "The serial number is not valid for this product" | Creative Suite

  • Why is the panarama function in my Elements 12 not active? Also, how do you burn and dodge?

    Why is the panarama function in my Elements 12 not active? Also, how do you burn and dodge in Elements 12?

    It sounds like you aren't in Expert Mode. Click the word Expert at the top of the PSE window to go there.
    For burn and dodge, click the Sponge tool and you'll see those tools in the tool options at the bottom of the screen:

  • How to know Warehouse Management is active or not in the system ?

    Hi Guys,
    How to know Warehouse Management is active in the system ?
    I have found Table TCURM and Field LVS_CUS to know WM is active or not. If thsi field LVS_CUS is 1 means WM is active and other than 1 means WM is not active. I have tried to run scenarios in WM by making this field is in active but all scenarios are running properly.
    So, what is the use of this and how to control this ?
    Give your valuable answers for this.

    Hello Narsimha..
    Just go to Transaction:EC01
    Go to Structure ,then Navigation,
    select your Co.Cd(eg:1000) ,open it by double clicking it..
    drill down to you plant and storage location,
    check wether Warehouse is assigned.
    If assigned WH is active ,if not not active..
    Hope this helps
    Arshad

  • I purchased Adobe Creative Cloud. Automatic activation is not happening! Requires an activation key. Received his letters in no Where and how can I get it? What do I do? An installed program can not!

    I purchased Adobe Creative Cloud. Automatic activation is not happening! Requires an activation key. Received his letters in no Where and how can I get it? What do I do? An installed program can not

    Sign in, activation, or connection errors | CC, CS6, CS5.5
    Mylenium

  • How to find if Classic Withholding Tax is Active or Not

    Hi All,
    How to find if Classic Withholding Tax is Active or Not for a company code. It is a U.S. company code.

    Hello Kumar,
    You can use tcode SE16 and view V_T001_EXT to check if extended withholding tax is active or not, for each company code.
    or if you prefer, use SE16 and table T001. Field WT_NEWWT.
    If extended is not active, then classic is used.
    Regards.

  • I formated my i phone 3 g and when it loaded back up and asked me to choose language local and wi fi connection everything went fine but when i hit next it said my i pod can not be activated  why  and how can i fix this i bought it for my daughter for x m

    i formated my i phone 3 g and when it loaded back up and asked me to choose language local and wi fi connection everything went fine but when i hit next it said my i pod can not be activated  why  and how can i fix this i bought it for my daughter for x mas and that is tomorrow

    AdaS_VZW,
    I'm not sure if the area has been surveyed; it's a large group of apartment buildings about a within a couple miles of Dulles International Airport in Northern Virginia, so I would imagine that it probably has, but I'm not sure. How would I find out?
    I understand that the Network Extender does not support LTE connections (I know there are two models, the 1x-only and 3g, both made by Samsung - I have the 3g model, SCS-2U01). I know that it can support a 3G data connection, but that should be irrelevant - I'm always connected to my wifi network in my apartment.
    What's particularly vexing, however, is that both a Galaxy S4 and Galaxy Nexus in my apartment (the other lines on my account) do not seem to have this issue. While I haven't done so with the S4, the Nexus exhibits this problem when my SIM is in it - and again, this is a fresh SIM from just a few weeks ago.
    I'm currently trying to disable Mobile Data when in the apartment to see if that will make it more stable. I'll post in a day or two with results from that.
    Shawn

  • How to identify whether that particular process chain is active or not?

    Hi all,
    How to identify whether that particular process chain is active or not ?
    thanxs
    haritha

    If see the process chain then it will not be greyed out if it is active. Or else check in these tables.
    RSPCCHAIN
    RSPCCHAINT
    to check the logs
    RSPCLOGS               
    RSPCPROCESSLOG
    Give the chain name and check in the object version.
    Khaja

  • How to test Particulare Communication Channel is active or not in UDF?

    Hi,
      Can any body suggest me how to code in UDF particulare Communication Channel is active or not. If it is inactive then I have to thow exception else ok.
    Appreciate for your response.
    Regards,
    Daniel.LA

    Daniel,
    Check this..
    String BSys = "BS_FSCM_AR_CLNT100";
    /1. Determine a channel (Business system, Communication channel).
    Channel channel = LookupService.getChannel (BSys,"CC_RFC_TEST");
    Then you do a
    //2. Get a RFC accessor for a channel.
    accessor = LookupService.getRfcAccessor(channel);
    add this code
    try{
    if(accessor == null;
    }catch(Exception e){
    throw new Exception("Communication channel for System " + BSys + "Inactive ");
    That should fix it....:-)
    Hope that helps
    Regards
    Ravi Raman
    Channel.

  • How to determine whether process Chain is active or Not

    Hello Experts,
    How to determine whether process Chain is active or Not, because i have large number of PC to activate.

    Hi,
    Please check this program in SE38---- /SSA/BWT
    This program will give you information regarding all your process chains which are active and running based on there timings.
    Hope it helps.
    Regards,
    AL

Maybe you are looking for