QM and WM Lot

Hi Gurus,
We  have a requirement which is related to QM & WM.
Single GR is made for 4 pallets (4 pallet is - a single batch(XXX)). As per the QC dept, each pallet needs to be checked for 2 quantities that is .. 2 Qty from each pallet , so the the sample will become 2*4= 8 Qty. ( it is entered manually)
Now the QC dept requirement is the same Sample quantity should have the referance of the each pallet ( ie pallet AA,BB,CC & DD-- are the four pallets number for the the same batch XXXX. The business requirement is that the pallet number needs to be tagged or mentioned some where along with the sample..in the lot.
Can anybody guide me on this.. or anywork arround is available for this requiremnent.
Santha.

Hello Sanstha,
It seems that the material is batch managed.  The sentence Single GR is made for 4 pallets indicates that the entire consignment of 4 pallets has been combined in same GR.
Maybe your query would be resolved if you create 4 inspection lots per pallet. I assume in your case only 1 inspection lot has been generated for 4 pallets.
Best Regards,
Anand Rao

Similar Messages

  • Report for Reorder point, safety stock, current stock and fixed lot size

    Hi,
    Purchasing Dept. is looking for a report which can give list of materials falling below the reorder point, so that they can go ahead and create procurement proposals for those materials.
    They also want to see the Reorder Point, Safety Stock, current stock and fixed lot size in the same report.
    Let me know if there ia any standard report availbale which displays the same or any approach to get the same.
    Thanks in Advance.
    Regards,
    Shankar Goud.

    Hi,
    There is no standard report because this is meant to be managed by the MRP run.
    The MRP lists show all materials that have a problem (such as stock below reorderpoint) but MRP generates requirements for these anyway and so all you need to do is to look for the MRP generated requirements (requisitions?) and you have your list?
    Are you using MRP?
    If so then please use the standard functions in MRP to get this.
    If not, then WHY NOT?
    Steve B

  • I looked at system.log in the system profiler today and see lots of activity at 2 a.m. when I was fast asleep, should I worry? It seems to reset hostname and mentions frequent transitions for interface, looks weird to me (I'm not a teckie!)

    I looked at system.log in the system profiler today and see lots of activity at 2 a.m. when I was fast asleep, should I worry? It seems to reset hostname and mentions frequent transitions for interface, looks weird to me (I'm not a teckie!)
    This is a section:
    May 12 02:05:10 wendy-drapers-macbook configd[14]: setting hostname to "wendy-drapers-macbook.local"
    May 12 02:05:29 wendy-drapers-macbook kernel[0]: Auth result for: 00:26:44:14:17:a3 MAC AUTH succeeded
    May 12 02:05:29 wendy-drapers-macbook kernel[0]: AirPort: Link Up on en1
    May 12 02:05:29 wendy-drapers-macbook mDNSResponder[16]: Note: Frequent transitions for interface en1 (192.168.1.92); network traffic reduction measures in effect
    May 12 02:05:29 macbook configd[14]: setting hostname to "macbook.lan"
    May 12 02:05:31 macbook mDNSResponder[16]: Note: Frequent transitions for interface en1 (FE80:0000:0000:0000:021E:C2FF:FEB3:1A3E); network traffic reduction measures in effect
    May 12 02:05:34 macbook com.apple.launchd[1] (org.samba.nmbd): Throttling respawn: Will start in 5 seconds

    I've been seeing messages exactly like that (and many, many other kinds) in the Console since the first version of OS X.  They look menacing but are harmless.
    You don't need any kind of security software.
    Just surf the web carefully, pay attention to where you're going and don't install anything that you don't recognize.  If you are asked to enter an admin user name and password, DON'T.  Unless you know for sure that you initiated the installation from a known and reliable source (like Apple).
    Mac malware relies on social engineering.  No amount of security/anti-virus, blah, blah, blah software is going to help.

  • Cash desk and payment lots documents not updating in DFKKOP table

    Dear Experts,
    I have noticed that my cash desk payments and payment lot documents are not getting updating in the DFKKOP table. I have identified that for this documents, the document class is updated with "1" which means "Document does not have FI-CA items".
    But, the postings where shown in the FPL9 transactions and clearing is happening as per the settings and requirements.
    So please update me, on what basis the system would determine the document class for the document types in contract accounting..
    Your inputs on this issue will be really helpful for me.
    Thanks
    Aditya Viswanath

    Hi Aditya,
    In a simple word, whichever documents are posted with MAIN/SUB creates a new row in DFKKOP with document number in DFKKOP-OPBEL.
    If a payment is posted as an open credit item, it should be there DFKKOP-OPBEL field and BETRW and BETRH will be populated with payment amount.
    However if a payment is posted as a clearing document against a debt, system updates that row of DFKKOP where DFKKOP-OPBEL is the cleared document number (debt, mostly an invoice). Clearing document (DFKKOP-AUGBL) of that row is updated with the payment document number.
    In either of the cases DFKKKO and DFKKOPK are updated and below are the reason.
    DFKKKO - document header level information (as who created, at what time, origin key, reco key etc.)
    DFKKOPK - (GL level information of the document)
    For payment lot and payment document related information you can refer DFKKZK, DFKKZP and DFKKZPT tables.
    Hope it clarifies your query.
    Thanks, Bodhisattwa

  • I recently update my iphone 5 and had lots of problems.  Apple support helped but now I see that none of my music is downloaded.  Do I have to download each song/playlist individually?

    I recently update my iphone 5 and had lots of problems.  Apple support helped but now I see that none of my music is downloaded.  Do I have to download each song/playlist individually?

    Updated the phone to IOS 7.1.1 but there was a problem with my computer.  Everything was removed from the phone but I couldn't get it back without help.  The tech helped me and everything is fine now except the music.  I did sync it and backed it up but wonder if I should restore backup.  I'm a little nervous to try that, what do you think.

  • Rounding Value,Minimum Lot Size and Maximum Lot Siz parameters

    Hello Gurus,
           Please explain me the what is the use of the parameter Rounding Value
    ,Minimum Lot Size and Maximum Lot Size parameters in the product master and how does it in impact during the Heuristic Run?
    Thanks.

    Rounding value is the incremental quantities in which the order can be produced/procured. Eg. if orders are possible with quantities 40,60, 80, 100 etc..then rounding value is 20.
    Min lot size is the minimum quanity in which order can be produced eg. 40 in above example
    Max lot size is the maximum quanitity in which the order can be produced/procured. eg. 100 in our example
    Impact on Heuristic run: heuristics takes all the above parameter to plan supply order. eg. if requirement is 55, it will supply plan for 60. If requirement is 120, it will produce two orders - one for 100 and the other for 20. if the reuqirement is 10, the order size will be 40.
    Hope this helps.

  • In process Inspection  Lot Qty and Actual Lot quantity difference.

    Hi Experts,
    In case of  In process Inspection
    Scenario : 1. Production Order created, released but before saving the qty is changed.
                    2. Production Order created released and saved. Then qty is changed in Change Prod order txn.
    These scenarios are causing a discrepancy in  Inspection  Lot Qty and Actual Lot quantity. Is there any method to avoid this ?
    This can be made correct in  Inspection lot by resetting the sample calculation. But once confirmation has started for Prodn Order (not necessarily QC operation) or  RR has been done  resetting is not possible.
    Is this the std behavior ? Disallowing the resetting once RR done seems OK, but even if any of the operation in Prodn Order is confirmed it still give status error while resetting. Canceling all the confirmation all the way back  also does not solve the problem.
    Any suggestions ?
    Regards
    Joe

    Hi
    Although your suggestion is valid, it is not practical from user point of view.
    Moving this thread to QM forum.
    Rgds

  • FFox 3.6.8. Repeated problem. I close it, then hours later try to relaunch it, and it says it's still running. So I have to End Process in Task Mgr. Also, plug-container keeps running and takes LOTS of memory. Ergo, 3.6.8 is a step backward.

    FFox 3.6.8. Repeated problem. I close it, then hours later try to relaunch it, and it says it's still running. So I have to End Process in Task Mgr. Also, plug-container keeps running and takes LOTS of memory. Ergo, 3.6.8 is a step backward. I wish I hadn't upgraded. What can be done?
    == This happened ==
    Every time Firefox opened
    == I upgraded to 3.6.8. Not before.

    See http://kb.mozillazine.org/Firefox_hangs and [[Firefox hangs]] (Hang at exit)

  • Rounding value and Minimum lot size

    Hi all,
    Finish material is X and Raw material is Y.
    Bom- For Preparing Xu2019s 1 Qty, 1 Qty of Y is required 
    In Material Master of Y - Rounding value and minimum lot size is 10,
    Project needs 5Qty of X.
    When MD51 for Project execute u2026 PR of Y must be of 10 as per rounding value and minimum lot size, but it is creating PR of 5 qty.
    Above scenario working properly if I take MRP run with MD02 for material X for 10qty, after MRP PR of Y will be created for 10qty.
    With Regards,
    Ashish

    Dear,
    By default, the lot size works as lot-for-lot quantity in the make-to-order and project scenario.
    Go to OMI4 select your Lot size and define Lot Size: SOP  1 or 2Lot-for-lot with rounding. Better create new Lot size as ZX with these setting.
    If you always want lots to be created for the multiple of the rounding value, you must specify a minimum a multiple of the rounding value.
    Example: minimum lot size: 10 and rounding 10.
    Please try and come back.
    Regards,
    R.Brahmankar

  • HT1766 Hello there, started to sinc my iPad 3 to my iPhone 5 with iCloud and a lot off the items did copy over, I was connected to a power supply but for some reason it's still missing half the items and I am struggling to retrieve them can you help pleas

    Hello there, started to sinc my iPad 3 to my iPhone 5 with iCloud and a lot off the items did copy over, I was connected to a power supply but for some reason it's still missing half the items and I am struggling to retrieve them can you help please.
    Thank you Callum Gordon

    Well the term "hotlined" I have never heard before. In any case many states (like NY) just passed regulatory powers to the State Public Service Commission of which it may be called something different in your state. You could file a complaint with them. Or file a complaint with your state attorney generals office, they also take on wireless providers.
    The problem here is the staff you speak to are poorly trained, in days gone by it took one call to them and they pulled up your account and see the error and had the authority to remove any errors. They did not remove legitimate account actions, but used their heads instead of putting a customer off or worse lying to the customer.
    Its a shame you have to go through what you going through.
    Good Luck

  • I have added photos to a portfolio website I'm building and a lot of them look VERY grainy when you click on them. They are nice clean large files and can print bat high res way over 16" x 20" so whats happened to them in iWeb?

    I have added photos to a portfolio website I'm building and a lot of them look VERY grainy when you click on them. They are nice clean large files and can print bat high res way over 16" x 20" so whats happened to them in iWeb?

    When you are dealing with websites, image file size is a trade off between quality and download speed. There's not a lot of point to having high quality images if they take too long to download in the browser.
    Nowadays we also have to consider the device that the end user is viewing the images on. An image that is optimized for viewing on a large screen is total overkill and unsuitable for those using mobile devices.
    Really we should be supplying different versions of media files for different devices using @media rules in the stylesheet but this is rather outside of the scope of iWeb. If you use the built in image optimizer and the iWeb Photo template with slideshow, the application will optimize the images according to the way in which you set this function in preferences and the slideshow size will be automatically reduced for those viewing it on smaller screens.
    If you want to give your viewers the opportunity to view large, high quality images, you can supply them as a download.

  • HT4557 Shared libraries from other people's libraries showing up permanently on MacBook Pro. And a lot of purchased and ripped songs vanished... Anyone...please help...?!?!

    Shared libraries from other people's libraries showing up permanently on MacBook Pro. And a lot of purchased and ripped songs vanished... Anyone...please help...?!?!
    The home sharing is now off and still has all the songs one there. Even rebooted the wifi modem, supporting hard drives and all computer involved in this catastrophe!! :( all computer are all updated and updated to the new iTunes.
    Please any help would be greatly appreciated and any more questions welcome. Thanks

    Basically anything not purchased from iTunes that is on my iPhone 6 will not sync over to my MacBook. I have tried to just manually back it up but only the purchased music will sync over to iTunes.

  • Mac Pro wont software update and a lot of apps keep freezing/crashing/not responding

    Mac Pro wont software update and a lot of apps keep freezing/crashing/not responding Im on OSX Lion and i have a Mac Pro 1.1 please help

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
    Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
    When you see the gray Apple logo, release the shift key.
    If you are prompted to log in, type your password, and then hold down the shift key again as you click  Log in.
    *Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.  The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Every time I try to get on youtube or netflix on safari all I'm getting is a white background and a lot of links and boxes with question marks in them, what is going on?

    Every time I try to get on youtube or netflix on safari all I'm getting is a white background and a lot of links and boxes with question marks in them, what is going on?

    Make sure your system software is up to date.
    Click the Apple  menu (top left in your screen) then click:  Software Update ...
    And try troubleshooting Flash. Uninstall then reinstall.
    http://kb2.adobe.com/cps/865/cpsid_86551.html#ostype=m,prob1=fnctn,prob2=game,

  • How to fix the signal with the microphone to the computer when recording through an interface? every time i record and play back i get poor signal and a lot of fuzz

    How to fix the signal from the microphone to the computer when recording through an interface in logic pro? Every time i record and playback i get poor signal and a lot of fuzz.. how can i fix this problem?

    Which model computer?
    What operating system?

  • After updating ios on my iphone 5 to 7.0.2, some aps as facebook, whatsapp and a lot more do not start any more. It is impossible to login or connect.

    after updating ios on my iphone 5 to 7.0.2, some aps as facebook, whatsapp and a lot more do not start any more.
    In Facebook e.g. it is impossible to login or connect.

    Hello rvdrvd,
    If you are having issues with your apps, check out the general troubleshooting for apps downloaded.
    iOS: Troubleshooting apps purchased from the App Store
    http://support.apple.com/kb/TS1702
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

Maybe you are looking for