Qm check with HU and without HU for same material.

Hi,
I have a doubt, I am implementing in a chemical industry  and I have the material that is 1st getting GR from production to Tank (Insp type 04) and then at a later stage i am creating a packing order with GR of the HU (insp type 04). problem is that i have QM active for GRN from production for both points but 1 is HU managed and the other is not. System does not allow without HU tick in Inspection type setup in MM. How do i go about doing GR for both HU managed and non HU managed in the same material?
Thanks,
Ariel.

Hi,
Thanks for the reply, I have 2 queries with this, i had already defined a new insp type (say Z040) as a copy of 04 and checked the tick for HU, i have also defined 2 inspection plans for the same material and set the manual determination but the system is not generating the lot for the HU managed material. How do i get the system to generate the lot. how do i trigger the user exit?
Please reply...
Thanks,
Ariel Desa.

Similar Messages

  • Acquisition with vendor and without vendor

    Dear All,
    This is my first time using FA in SAP Business One.
    I have a lot of question about FA in SAP B1 especially in FA Acquisition.
    There are two kinds of acquisition. With vendor and without vendor.
    If we choose the aquisition with vendor, we must enter the vendor and the JE will be created like this
                                      Debit             Credit
    V01                                                 1500 USD
    Asset Computer       1500USD
    It seems the the JE create like AP invoice, so we can continue the out going payment for the vendor.
    But the problem is in Acquisition without vendor.
    I have a scenario.
    I buy a car. I create PO > GRPO> AP invoice--> Out going Payment.
    After that if i run the acquisition without vendor.
    The JE will be created like this
                                                                    Debit       Credit
    Clearing Acc. Asset Acquisition                             1500Usd
    Asset Car                                                 1500 USD
    ( Please correct me if my Journal is wrong )
    From this Journal Posting, i find some thing odd.
    When i buy a car and i created the GRPO.
    The JE will  create the Asset car position in Debit.
    After that i create the Acquisition without vendor. The Journal also posting the Asset Car account in Debit. So the Asset Car account balance become 3000 USD.
    So what must i do to avoid this problem.
    I check the document FA. It is said that before create the Acquisition without vendor, the AP invoice must already be  created.
    In the documentation, they create the AP invoice in service type. Is it a must to create the AP invoice like this ?
    Please tell me what should i do if create the Acquisition without vendor.
    Any suggest or solution would be great.
    Thanks in advance
    Regards
    KK

    Fixed Assets are created in the add on, not the item master.
    Your choice is that
    1. all fixed asset puchases go through a clearing account and a different team is responsible for creating the assets & performing the acquisition,  (1 step for one team, two for another) or  
    2 that the person acquiring the asset creates the master data item in fixed assets, then the acquisition with vendor (one two step process)
    Depends on the size of the organisation and the roles & responsibilities within the organisation

  • My Apple Earphones with Remote and Mic White For iPhone says: made ​​in vietnam. i want to know if they are OEM?

    My Apple Earphones with Remote and Mic White For iPhone says: made ​​in vietnam right in the cord. i want to know if they are OEM? here my email: [email protected], thanks.

    Accidental damage is not covered under the warranty but if possible to reset the screen without causing additional damage, the Apple Store should do this without charging for it.

  • Sales return with warranty and without!

    Hi,
    I have a scenario like sales return,
    2 cases, with warranty and without warranty
    I need your guidance on controls,
    1st case with warranty,
    Stock has been taken in to the plant with respect to sale return order.
    I generate service order SM01 (Non revenue generated)
    Maintain operations and material
    goods issue and operation confirmation
    technical completion.
    Now I run DP90 for resource related billing. And need to control that service order cost does not go to billing document. But I don't want to bill the customer.
    Please correct me, I only settle my service order and leave it. How should I go about it. Please help me.
    2nd case, when there is no warranty,
    I create a service order SM02 (revenue posting allowed)
    Maintain operations and material
    Then run DP80 to generate quotation and confirm quotation.
    goods issue and operation confirmation
    technical completion.
    Run DP90 for billing the customer.
    Could you please suggest me if I need to make any changes to this. If so, which part of it (SPRO) i need to configure.
    And as per my understanding if service contract exist then it will help to determine fixed price in with out warranty case.

    Hi,
    Yes I could able to run DP90 though I don't declare the order as revenue based. Infact the if refurbishement order (SM03) has to trigger automatically from sales order RA. Infact if it is revenue based we canot even generate it from sale order.
    You can even refer to this following link which states that cycle.
    [http://help.sap.com/saphelp_46c/helpdata/en/e6/4a8df09e0311d189b70000e829fbbd/frameset.htm]
    I have only doubt during this process billing is based on DIP profile. But how does pricing procedure is coming in to picture. And how and where to link Pricing procedure. Please guide me. And from one of my collegue came to know that accounting Indicator can be used to get discount condition in pricing procedure so, that when we run for Warranty cycle we can bring that condition to get 100% discount through KBM1 condition type.
    Regards,
    N,Nagaraju

  • Risk with Locking and changinf password for SAPCPIC

    Hi All,
      Please advice if there is any risk with locking and changing password for SAP standard user SAPCPIC .We are on system 4.6D .
      Somewhere I could find that if there is any RFC destination defined with this user then it may cause problem after locking .I found following entry in RFCDES table .
    a       I                                          
    M=200,U=SAPCPIC,L=E,v=3FB20DF66CA32E419606388B51,   
    But I could not find any entry in sm59 for this .What is this entry as it is not there in SM59 .
    Any other known risks pls tell me .
    Thanks,
    Chittaranjan

    Can password of SAPCPIC user be changed without any problem?
    We are on ECC6.
    Report RSUSR003 refer to note 29276 and note says that changing password will cause problem with SM51 and some other report as the password is hard-coded there. Though this note seems to be bit old.
    Edited by: Pawan Kesari on Jun 9, 2009 7:58 PM

  • What is the difference between sales order with picking and without picking

    hi friends,
    i would like to know what is the difference between sales order with picking and without picking.
    thanks
    skrishnan

    Hello,
    Picking refers to preparing the right quantity and quality of goods for shipping on schedule as required by the customer.
    Once picking is configured, SAP Sd automatically generates picking lists and picking labels which can be tagged to the relevant goods. SAP can be configured to ensure that picked quantity is confirmed before goods are issued. This can be done using transaction code VSTK. In T-code VSTK, picking confirmations can be set, which ensure that goods picked for delivery are in accordance with picking slips.
    Picking thus helps in monitoring each item using the picking status. Picking is normally done in SAP SD by a shipping clerk.
    Prase

  • I have been connecting my external HD to my Mac for 2 years, no problem at all. Yesterday, I could not connect it and appeared the message: USB ports disconnect due to energy. I already checked many blogs and this site for answer. Can someone help me

    I have been connecting my external HD to my Mac for 2 years, no problem at all. Yesterday, I could not connect it and appeared the message: USB ports disconnect due to energy. I already checked many blogs and this site for answer. Can someone help me? How can I fix it?

    Hi, clara_from_brazi.
    Thank you for visiting Apple Support Communities.
    Here are some troubleshooting steps that I would recommend when experiencing this issue.  Also, test connecting the external storage device to the computer with another cable as this can be the issue.  
    OS X Mavericks: Reset your computer’s PRAM
    http://support.apple.com/kb/ph14222
    Intel-based Macs: Resetting the System Management Controller (SMC)
    http://support.apple.com/kb/ht3964
    Apple Computers and Displays: Powering peripherals through USB
    http://support.apple.com/kb/HT4049 
    Cheers,
    Jason H.

  • I use a Win7 PC with iCloud and Outlook 2010 for syncing my calendar and contacts. I can enter data in my Outlook Calendar and it will appear in iCloud, but data entered in iCloud does not sync back to Outlook.  ICloud syncs to my iphone fine both ways.

    I use Win 7 PC with iCloud and Outlook 2010 for syncing my Contacts and Calendar.  They have stopped syncing...mostly.
    Now, appointments I enter on my local Outlook (iCloud) Calendar goes up to iCloud fine.  But, data I enter on iCloud directly does not come down to my local Outlook iCloud Calendar.  If I reboot the computer, the iCloud data shows up.
    Also, Contacts I try to enter on my Outlook (iCloud) Contacts goes up to iCloud fine, but does not show up in my local iCloud Contacts.
    All syncing works with my iPhone.
    I have signed out of iCloud on PC.  I have stopped syncing and re-started.  No change.
    I have an .aplzod folder for iCloud.  I have a separate Earthlink.net.pst email account in Outlook and a me.com.pst Outlook email account (which I don't actually use) listed under Data Files.
    Any help would be appreciated.  Curious that Outlook will upload to iCloud but not receive downloads unless I reboot.  However, rebooting does not download the missing Contacts.
    Jim Robbins

    Hi Jim!
    You've started off with some good troubleshooting steps, so let's see if we can take this a little further and figure out what the issue is with your iCloud contacts and calendars. I have two articles here that will help you troubleshoot this issue a little further, but the troubleshooting steps for both articles are exactly the same, so I will lay those out for you here:
    Note: When using iCloud Control Panel 2.0 and later, iCloud Calendar event descriptions in Outlook 2010 do not support text formatting (bold, italics, or underline), HTML, images, or attachments. The contextual (right-click) menu has also been disabled.
    If you are having trouble with a PC (with Outlook 2007 or 2010) and iCloud Calendar, try each of these steps, testing after each to see if the issue is resolved:
    Verify that you are using a Windows configuration that is supported by iCloud. For more information, see iCloud system requirements.
    When enabling Calendars in the iCloud Control Panel, part of the setup process is to copy your Calendars data from the default Outlook ".pst" file to iCloud, and then remove the Calendars from the ".pst" file by placing them in the Deleted Items folder in Outlook. The Calendars data is then stored in the iCloud data set within Outlook so that changes can be pushed to and from Outlook by iCloud. Be sure you are looking for your data within the iCloud dataset within Outlook after enabling Calendars in the iCloud Control Panel. The deleted files can be seen by viewing Deleted Items within your Outlook Folder List. This is not iCloud removing your data; iCloud simply copies your data into the iCloud data set and then removes the local Calendars data by placing it in the Deleted Items folder.
    Make sure your computer is online. Attempt to view www.apple.com and iCloud.com. If you can't connect to the Internet, your iCloud calendars and events will not update in Outlook. Click here for more information about troubleshooting your Internet connection.
    Open a secure website to test if you are online as is necessary for iCloud Calendar. This also tests if the ports 80 and 443 are accessible. Outlook requires port 443 access to iCloud in order to push and pull updates to and from the iCloud Calendar servers.
    Verify that your iCloud member name is entered into the iCloud Control Panel pane. See iCloud Setup for more information about setting up iCloud on Windows.
    Completely close and reopen the iCloud Control Panel.
    If you recently made changes in Outlook and they are not moving to your other devices or vice-versa, click the Refresh button in Outlook.
    Turn iCloud Calendar off and back on:
    Close Outlook.
    Open the Windows Control Panel:
    In Windows 8, move the pointer to the upper-right corner of the screen to show the Charms bar, click the Search charm, and then click the iCloud Control Panel on the left.
    In Windows 7 and Vista, choose Start menu > All Programs > iCloud > iCloud.
    Remove the checkmark in the checkbox next to Mail, Contacts, Calendars & Tasks, and click Apply. Wait a few seconds, then replace the checkmark, and click Apply.
    Open Outlook and test to see if the issue has been resolved.
    Ensure the iCloud Outlook Add-in is active within Outlook.
    Outlook 2010:
    Open Outlook 2010.
    Click the File menu.
    Click Options in the left panel of the Outlook window.
    Click Add-Ins in the left panel of the Outlook Options window.
    Look at the list of add-ins beneath "Active Application Add-Ins" and verify that the "iCloud Outlook Add-in" is listed.
    For Outlook 2007, follow these steps to verify the iCloud Outlook Add-in is active
    Open Outlook 2007.
    From the Tools menu, choose Trust Center.
    Select Add-ins from the left column.
    Look at the list of add-ins beneath "Active Application Add-Ins" and verify that the "iCloud Outlook Add-in" is listed.
    For additional information about managing Add-ins with Microsoft Outlook, see this Microsoft support document.
    Restart your computer. This may sound simple, but it does reinitialize your network and application settings and can frequently resolve issues.
    iCloud: Troubleshooting iCloud Contacts
    http://support.apple.com/kb/ts3998
    iCloud: Troubleshooting iCloud Calendar
    http://support.apple.com/kb/ts3999
    Thanks for using the Apple Support Communities!
    Cheers,
    Braden

  • Hello, I use photoshop cc 10 days and I did a lot of files with layers and channels. For two days in two different locations that only happens in some documents when you reopen the job done no more .. Example 6 channels on the facts I see only one .. Than

    Hello, I use photoshop cc 10 days and I did a lot of files with layers and channels.
    For two days in two different locations that only happens in some documents when you reopen the job done no more .. Example 6 channels on the facts I see only one ..
    Thank you for your attention.
    Annalisa 

    Don't understand what you writing here.  Screen shoots would be most helpful.
    Supply pertinent information for quicker answers
    The more information you supply about your situation, the better equipped other community members will be to answer. Consider including the following in your question:
    Adobe product and version number
    Operating system and version number
    The full text of any error message(s)
    What you were doing when the problem occurred
    Screenshots of the problem
    Computer hardware, such as CPU; GPU; amount of RAM; etc.

  • I bought Adobe Photoshop Elements 13 from wal mart today, and when i go to type in my redemption code to get my serial number it says my redemption code is invalid? and yes i have done it with caps and without caps, ive tried everything and I dont know wh

    I bought Adobe Photoshop Elements 13 from wal mart today, and when i go to type in my redemption code to get my serial number it says my redemption code is invalid? and yes i have done it with caps and without caps, ive tried everything and I dont know what to do anymore. I know its non returnable once opened and the package wasnt tampered with when I bought it. im at a loss on what to do

    Redemption Code http://helpx.adobe.com/x-productkb/global/redemption-code-help.html
    -and https://forums.adobe.com/thread/1572504
    Lost serial # http://helpx.adobe.com/x-productkb/global/find-serial-number.html

  • I already have a new book that is ready to publish as an iBook. In addition I also have an app prepared for this book. Please tell me how to upload this book (title is: "How To Cope...with life") and the app for it into your iBook Authors app so I can hav

    I already have a new book that is ready to publish as an iBook. In addition I also have an app prepared for this book.
    Please tell me how to upload this book (title is: "How To Cope...with life") and the app for it into your iBook Authors app so I can have it offered for sale @$0.99, in your app store?
    FROM: Terry Weber, Email: [email protected]

    https://itunesconnect.apple.com/WebObjects/iTunesConnect.woa/wa/bookSignup

  • When I share a video with fcpx and it goes to Quicktime, the last few seconds goes mute. I checked the clip and sent that the same route and all is fine. It is only when I send the whole 3gb video. Any ideas?

    When I share a video with fcpx and it goes to Quicktime, the last few seconds goes mute. I checked the clip and sent that the same route and all is fine. It is only when I send the whole 3gb video. Any ideas?

    paul71054 wrote:
    ... Any ideas?
    add a few seconds black to your project.
    Try again.
    could be some really weird codec problem, with 'cut' GOPs', .. somethin'...

  • Unit Conversion issue for same material with Diff KPI

    Hi,
    i have a report with multiple key figures which form a structure.
    Unit conversion for this report and all the key figures are defined at report level.
    Below are the settings in place
    Source currency:    Data record from target
    Target Currency:    From variable ( Input variable in BeX report)
    Conversion  factor: Dyanamic Determination of conversion factor
                                   Using Reference Infobject if available otherwise use T006
                                   Reference Infobject: 0Material
    Issue: For 1 Key figure conversion to TO is happening, however for other Key figure conversion is not happening for the same material.
    Note: Conversion to TO is defined in BEX settings for Info object 0material and stored in DSO UOM0MATE.
    Why for same material some key figures convert to target unit correctly and not the others?
    See the attached screenshot. Sales Quantity is convertin to "TO" while Volume third party shows figue in"ERR" for same material.
    Thanks
    Nayab

    Hi,
    Following reasons cause to your issue,
    1. Unit Conversion is not maintained for that particular material  in source system Material itself, so that  conversion data data may not updated in DSO (UOM0MATE).
    2. For particular transnational data record key figure value don't have any base unit or units measures, that case also  you may get that error.
    Request check the transnational data in your InfoProvider and 0Material Master data and DSO data (UOM0MATE) . Correct the data based on that.
    Check the Master data test in RSRV for 0Material, if any SID generations was missed or not.
    I hope this can be help to find the cause of error , based on that you can resolve problem.
    Thanks & Regards,
    Leela Krishna.

  • GATP/ATP Check for Different Order Types for same material

    Hi :
    I have a material code X for which 2 different type of Sales Order (Say A and B )needs to be created.
    For Sales Order Type A the atp check needs to be done in APO through GATP for material code X.
    For Sales Order Type B the atp check needs to be done in SAP R/3 ECC 6.0 through availabilty check functionality for same material code X.
    It is not possible to create seperate material codes to carry out atp/gatp check seperately in R/3 and in APO.
    In real time the atp and cumulative atp position should be same in R/3 and in APO.
    Please let me know solution for this issue.
    With Regards
    Ashish Gupta

    Hi Ashish,
    Can you share with us as to how you were able to solve this issue. I have a similar issue like yours and I am totally clueless as to what needs to be done..
    My scenario goes this way:
    I have to modify the Schedule line dates for a GATP material according to a newly created date which I calculate based on the Route Schedule id (VL51, VL52) and display the same in the Sales Order schedule line items.
    Also can I get a new set of schedule line dates from the APO system for a date which I calculate based on the Goods Issue date - VALW-AULWE in any exit using a FM or a BAPI?? so that I can get these dates and populate the same in the Sales Order Schedule line??
    Thanks in advance,
    Susanth

  • Auto To working for one material and not working for other material

    Hi,
    Hope everybody is doing fine.
    I have configured the auto TO. Its working fine for one material and not working for the other material. I checked the material master and wm 1,2 views have the same fileds / values. What could be wrong?
    I didn't setup the back ground processing job. Is that is affecting it?
    thanks for any help.
    regrads,
    KHAN

    Thnaks,
    You are right but then what could be wrong? Its working for one material and not working for otehr material? Any clue?
    Appreciate your time charlie

Maybe you are looking for