QM_Code group assignment to catalogue profile

Dear QM Consultants,
I am trying to assign one code group to catalogue profile through OQN6 transaction.
The case can be put as follows
e.g.
Catalogue profile     : ABCD
It contains 4 code groups (A, B, C and D) from catalogue 9.
Each of these code groups i.e. A, B, C and D contains 4 codes as follows
Code group          Codes
A                           a1, a2, a3, a4
B               b1, b2, b3, b4
C               c1, c2, c3, c4
D               d1, d2, d3, d4
where small letters indicate codes
1.     There are 3 servers as development, quality and production.
2.     At initial data migration above data is present in all the 3 servers.
3.     In due course of time it happened that codes were added to code group A as a5, a6 and a7   in production server directly. That means codes a5, a6 and a7 DO NOT EXIST in development and quality server.
4.     Now at such scenario another code group Y is created with codes y1, y2, y3 and y4 in all the servers by transport request mechanism.
5.     The requirement is to assign this newly created code group to catalogue profile ABCD though request only since production server has status as non modifiable for OQN6 transaction.
My query is, whether system will throw any errors while transporting request for assignment of code group Y to catalogue profile? Is there any solution to assign this new code group to this catalogue profile. Kindly note all the codes under this code group Y are present in all the 3 servers.
Thanks in advance,
Best Regards,
Anand Rao

Hi Gajesh,
Thanks for prompt reply.
Well, as suggested by you, the option may work. I need to test the same.
Other way round, I feel whatever scenario I have mentioned above it will not create any problem to assign Y code group to catalogue profile, because while assigning the request which it generates in development server; contains T352C, T352B tables only. It is not affecting QPCT or QPCD tables.
Thatu2019s why I feel it wonu2019t create any problem, but I am not so confident. Well as you rightly said, let's wait for otheru2019s opinion also.
Have a great day ahead,
Best Regards,
Anand Rao

Similar Messages

Catalogue profiles

How are catalogue profiles created and linked to an equipment.
Are the catalogue profiles defined in spro?

Hi
Code and code groups are created in QS41 , Then while creating the catalog profile you can specify whether the particular codes should be available for selection in notification ( catalog profile should be assigned to equipment or functional location)
Regards
Thyagarajan

Static Identity Group Assignment

                   Does anyone know a way to bring in an endpoint with the following attributes?
Endpoint Policy Name       Static = True
Static Group Assignment   Static = True
The 1.2 manual says;
If the file used for import contains endpoints that have their MAC addresses, and their assigned endpoint profiling policy is the static assignment, then they are not re-profiled during import.
To change a dynamic assignment of an endpoint identity group to static, check the Static Group Assignment check box. If the check box is not checked, then the endpoint identity group is dynamic as assigned by the profiler based on policy configuration.
Statically Profiled Endpoints
An endpoint can be profiled statically when you create an endpoint with its MAC address and associate a profile to it along with an endpoint identity group in Cisco ISE. Cisco ISE does not reassign the profiling policy and the identity group for statically assigned endpoints.
A) Does anyone know a way to import from an LDAP database and maintain the Static Group Assignment = True.
I successfully do an LDAP import of the MAC and Endpoint Group (which comes in as True) but the Static Group Assignment has the Endpoint Group Assignment correct but static is false unchecked. I don't want these profiling any more. These are thousands of endpoints and I do not see any way to do a bulk change. I have tried exporting and re-importing but that doesn't really scale.
B) Would creation of an endpoint group that is not part of the Profiled endpoint group change the behavior I see above when I do my LDAP import?
If there were a way to do the bulk selection and change the static property or the Static Group Assignment that would be of huge benefits. The changes apply to the fields selected within the endpoints while maintaining the MAC property of the endpoint.
Thanks in advance for any suggestions.

James,
That is possible but do you have the dhcp probe enabled and have you thought about setting up an ip helper statement or assigning the ISE node as one of the dhcp servers on the WLC?
There is a built in check such that if the dhcp class identifier contains MSFT will profile the endpoint as a windows workstation.
However if this is not the case then you can create the following condition under the Policy Elements > Conditions > Profiling > New Profiler Condition, you will use the create (advanced...) then select NMAP > 135-tcp > then set the operator EQUAL to msrpc.
Then go under the Microsoft-Workstation and select the option to create a matching identity group (its much easier rather than using the heirarchy option) and set the certainity factor 30. Then add this new condition and set the certainity to 30 also.
Hope that helps,
Thanks,
Tarik Admani
*Please rate helpful posts*

Group Assignment and Analytics Visibility

Hello,
We are thinking of using the Group Assignment feature in On Demand. However, I have not found documentation on how this affects Analytics reporting visibility. I see the options for Manager, Team, and Full Visibility for Analytics. However, I would like to find out if users belong to a particular Group, would they also have visibility to those associated Accounts, Opptys, etc associated with that group in Analytics by using Team Visibility?
Thanks!

Imagine if we two are sales rep belonging to the same team then I would see records for which i am owner and also records for which my team members are owner.So we can see each others data provided we are on the same team and team visibility is applied under our user profile.

Configuring group policy for user profiles in Windows Server 2012 R2 Domain

Requesting some experts advise on configuring group policy for user profiles.
We will be building new Windows Server 2012 R2 Domain Controllers (Domain of 400 users).
The settings which I am concerned:
1. Folder Redirection: Desktop, Documents, Favorites.
2. Quota for Folder Redirection - 1 GB per user.
3. Map a networked drive - 1 GB per user.
4. Roaming profile - (Will ignore if it does not suit our requirement).
The question is how outlook profile will be retained / automatically moved if the users move from once computer to other?
FYI, E-mails hosted on MS Office365 and OST file size of few users more than 25GB. So, in case the user moves from one computer to other, the entire mailbox will be downloaded via internet. This consumes high bandwidth if more than 3-4 users shift per day.
Thanks a lot for your valuable time and efforts.

Hi,
>>The question is how outlook profile will be retained / automatically moved if the users move from once computer to other?
This depends on where our outlook data files are stored. If these data files are stored under
drive:\Users\<username>\AppData\Local, then these files can’t be redirected, for folder redirection can’t redirect appdata local or locallow.
However, regarding your question, we can refer to the following thread to find the solution.
Roam outlook profiles without roaming profiles
http://social.technet.microsoft.com/Forums/office/en-US/3908b8e0-8f44-4a34-8eb5-5a024df3463e/roam-outlook-profiles-without-roaming-profiles
In addition, regarding how to configure folder redirection, the following article can be referred to for more information.
Configuring Folder Redirection
http://technet.microsoft.com/library/cc786749.aspx
Hope it helps.
Best regards,
Frank Shen

The business system HRK_005 is not a business system in the group assigned

Hi there,
i have a Problem. I want to transport a Scenario from our Consolidation to our Prod System.
In this Szenario, there are XI and HR Systems included.
On Consolidation Side:
XIK_001
HRK_005
in Prod
XIP_001
HRP_001
When i now export the whole Scenario from our K System and want to import it to our P Systems the following error occurs:
The business system HRK_005 is not a business system in the group assigned to production.
I have no System HRK_005 in production. HRK_005 is in Group Consolidation?!?
Can someone help here?
Thanks
Bjoern

Oops i spoke with u r key code it bounced back .
Well i explained standard way to export and import Intergration Directory objects.
K - Development System ( SLD_Dev)
P - Production System (SLD _Prod)
In K - SLD_Dev needs Group -- This is based on the Integration Server (IS) of the K / P XI server.
IS (K) -- Group1 / IS (P) -- Group2 (All this in the SLD_Dev)
Assign all BS of K to Group1
Assign all BS of P tp Group2
For BS of K specify the target transport as Production BS (P).
Now goto P (SLD_Prod) create the BS as same in K what you have created in Group2
Now export from K (Dev) to P(prod)
am not able to view the link provided.
Any ways i have listed standard way for transport, hope this helps
Srini

Exported Raw Conversion Image Resolution and Assigning a Color Profile, etc

In Aperture 1.1, although I set the exported Raw conversion image resolution to 300 dpi in the preferences, it continues to come out at 72 dpi which is something of an inconvenience. Also, is it possible to assign a color profile to the "exported version" so that it is congruent to my PS CS2 color workspace (if that is what its called). Is this program capable of carrying out a conversion as a background operation? Finally, can the layout windows be configured so that they remember how they have been used in the past? Thanks.

Iatrogenic huh! Cool!
Anyway, I'm not real clear on what it is you are trying to accomplish. Despite your obvious vocabulary skills, there seems to be some disconnect relative to what you are trying to accomplish. You are right that "exporting a version" in Aperture is roughly equivalent to what happens in ACR when you "Open" a RAW image into Photoshop. In both cases you have, hopefully, already done the adjusting of parameters you want prior to "exporting", or "opening". When you "open" or "export" you wind up with an "image" composed of pixels, whereas in the RAW adjustment phase you are just working with a temporary thumbnail and a set of mathematical instructions. Big difference, I suppose is that when you "open" and image from ACR into CS2, the resulting image is truly just pixels and has not had a "file type" applied to the file yet, until you "save" it, while in Aperture, if you "export" a file to CS2, or to the desktop, you end up with the file type already applied. Presuming you "export" a 16 bit TIFF or PSD, there is no operational difference.
I could be wrong, but with the new Bayer Demosaicing algorithms in Aperture 1.1, and the Camera RAW adjustments, you should be able to come up with an adjusted image that is VERY close if not identical to one done in ACR, with the possible exception of lens abberation adjustment. I was very critical of the RAW adjustments in 1.0.1, but I am very happy with the capabilites in 1.1. That said, I think there is still some room for improvement in user friendliness of some of the adjustments such as Levels.

Assign Plan/Budget profile to Internal Order

While executing KO22 for particular internal order for order type 0800, I am getting the error - Assign Plan/Budget profile to the object.
GMR

hi
while defining the order type in IMG ,you have to define the buget profile and then check
regards
thyagarajan

PreDefault Value of a field depending of a Group OR an access profile

Hello,
I can't find how to set a PreDefaultValue depending of a group OR an access profile OR a role during the creation (new event) of a new record (i.e. opportunity).
Have anyone an idea ?
Thanks.

use if function like Uservalue(<role>)<> Administrator then one value otherwise another value. Hope it help, i never tried this, use the following syntax IIF(Uservalue(<role>)<> Administrator,value1,value2).
Cheers
Subbu

(CS4) (AS) Syntax for assigning existing Preflight Profile

Building an AppleScript workflow to tie a FileMaker database to IDCS4, using Triple Triangle's Job Spec Cubed. Very fun.
I'd like to add a tell statement to assign existing Preflight Profiles to existing documents. We have four standard preflight profiles, named "72", "150", "200", "300" and "360". I know the syntax to load the profiles from an external source, but I'm stumped on how to assign them then embed them.
tell application "Adobe InDesign CS4"
set myDocument to active document
set myPage to page 1 of spread 1 of myDocument
tell myDocument
set preflight profile to "72"
end tell
end tell
Any thoughts?
Thanks

So, the correct syntax is:
tell application "Adobe InDesign CS4"
set myDocument to active document
set myPage to page 1 of spread 1 of myDocument
tell myDocument
embed using "150"
end tell
end tell
for the imbed command, you can use any known preflight profile. In my case, I'm going to pass through the name of the profile as a FileMaker variable.
Very cool.
Thanks again, Shane.

Possibility to assign a color profile in the color management tab for more video formats

Presently, in After Effects CS5, in the color management tab of the "Interpret Footage" dialog box the possibility to assign a color profile to footage is grayed out for many video formats.
Formats that allow to assign a color profile include Quicktime/JPEG2000, Quicktime/Motion JPEG A, Quicktime/Motion JPEG B, Quicktime/MPEG-4, Quicktime/Animation as well as various image sequences, like tiff-sequences. (Motion JPEG A,B and Quicktime/MPEG-4 are not very helpful in this context because they have a small color shift when reimported to After Effects.)
Formats that do not allow to assign a color profile include Quicktime/PhotoJPEG, Quicktime/H264, H264 main concept, DVCPRO HD 1080p30, F4V. (Here, H264 main concept has anyway the disadvantage that it has a color shift when reimported into After Effects.)
In After Effects CS4 it was possible to assign a color profile to Quicktime/H264, Quicktime/PhotoJPEG, DVCPRO HD 1080p30, but in CS5 this is no longer possible.
Those video formats that do not allow to assign a color profile automatically are interpreted as having the color profile HDTV (Rec. 709) Y'CbCr in case that the videos have 1920x1080 format; similar applies to PAL formats which get SDTV (Rec. 709) Y'CbCr color profile.
(I did not find anything of this automatic assignment to HDTV or SDTV color profile in the "interpretation rules.txt" file, therefore it must be written into the programme itself.)
With growing popularity of wide gamut monitors it becomes necessary to produce footage and other videos that have a color profile different from HDTV or sRGB. When such footage is reimported to After Effects it has the wrong color and the only workarounds are either to use (in After Effects) the effect "Color profile converter" which necessitates extra render time or to use somewhat unpopular formats, like JPEG2000 that has very large filesize.
Presently many footage is produced in Quicktime/PhotoJPEG and therefore it would be very desirable to allow to assign a color profile to such footage in the color management tab of the "Interpret Footage" dialog box.
Does anyone know why in AE CS5 the video formats Quicktime/PhotoJPEG and Quicktime/H264 do not allow to have an arbitrary color profile assigned (although it was possible in CS4), is it a bug, or does it have a deeper reason.
In this context I have a related question, often I read that Quicktime videos have a gamma tag. Does this mean that part of the color profile (the gamma value) is actually embedded/remembered, like you have it for images where the gamma is part the embedded color profile.
I use AE CS5 on Mac Pro 2009 with OS 10.6.7.
Thanks,
Volker

Thank you Rick for this interesting explanations and the links to articles.
In the past few days I performed a few tests in After Effects and it is interesting that you mention that cameras, like the Sony EX3, allow videos to have embedded color profiles. I am not working myself with cameras but either get footage from the internet or sometimes videos from our video department which produces videos with professional SONY cameras, usually I get them in a matrox mxf format.
As far as my test with After Effects show it is not possible to embed color profiles in the videos rendered with After Effects. Independent of the color profile in the working space and independent from the color profile in the output module I always get the same reaction if I reimport videos rendered by After Effects back to After Effects:
In AE CS5 videos made in the formats Quicktime/PhotoJPEG, Quicktime/H264, H264 main concept, DVCPRO HD 1080p30, F4V are always interpreted as color profile SDTV/HDTV (Rec. 709) Y'CbCr (even if I made them in other color profiles, such as Adobe RGB, Photo RGB, sRGB); and there is no possibility to change this interpretation rule.
In contrast videos made in the formats Quicktime/JPEG2000, Quicktime/Motion JPEG A, Quicktime/Motion JPEG B, Quicktime/MPEG-4, Quicktime/Animation are always interpreted as sRGB (even if if I made them in other color profiles, such as Adobe RGB, Photo RGB, HDTV); only this time I can change the interpretation rule. Therefore if I know for example that if I had selected Photo RGB in the Output module I can change after the reimport the interpretation rule from sRGB to Photo RGB and only then I get again the original colors.
The only exceptions are picture sequences, such as tiff-sequences, where the original color profile is automatically selected in the interpretation of the footage.
Therefore, unfortunately for videos produced by After Effects your advice "If it says something like sRGB and you can change it, in most cases you shouldn't change it because the guess is probably right. If there is no color profile assigned then you should assume that is correct." is not so easy to be applied. You have to know how you did it originally in the Output module and hope that you can change it to the proper color profile, in case that the original color profile in the Output module was different from sRGB and HDTV/SDTV. But it is interesting to hear from you that with cameras there seem to be more possibilities.
For this reason it would be nice if in future versions of After Effects one could change the color profile in the the color management tab of the "Interpret Footage" dialog box also for formats such as Quicktime/PhotoJPEG, Quicktime/H264, H264 main concept, DVCPRO HD 1080p30, F4V.
Of course one can always circumvent shortcomings by using tiff-sequences, QT/jpeg2000, or QT/Animation as formats for storing, which is anyway better for lossless or nearly lossless storing, but the files are then too large and also cannot be played easily with a player.
Volker

Report User (groups) assigned to Bundles

Hi,
i need a report of users or user groups assigned to Bundles. I can create a report of Workstations assigned to Bundles. But the users are LDAP users, so they're not available in the user database of ZCM? Is there an option to report Bundles and there assigned LDAP Users or User Groups?
Regards,
Patrick

petjez,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://www.novell.com/support and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Forums Team
http://forums.novell.com

Effective start and end dates for roles/group assignment

Hi,
Does Access Manager (in legacy or realm) mode support effective start date/end date on a role/group assignment on a user?
Thanks,
Srinivas

Hi Ankush,
I am also of the same opinion. Start and end dates can probably be enforced by a policy condition in AM but would lead to proliferation of policies as we would end up creating policies per role entitlement duration for a user.
Any thoughts on whether the sunrise/sunset concept of Identity Manager can be used for this requirement.
Thanks,
Srinivas

Multiple Sales group assigned with sales office to Sales area

I need to know whether i could be able to assign different sales groups to Sales area in BP master.
Eg Sale grp 1 assigned with sales office 1 to Sale org 1, DC1,DIV1.
      Sale grp 2 assigned with sales office 1 to Sale org 1, DC1,DIV1.
      Sale grp 3 assigned with sales office 1 to Sale org 1, DC1,DIV1.
The standard system is not allowing to maintain more than one combination if the same Sales Area. In the practical scenario, there could be more than one sales group can look after the sales in Sales Area thats attached to one sales office. Is there otherway to check this requirement?
Another requirement is i need to read the sales group value during processing the transaction ( Remember still i have not saved the transaction and i am processing it). I have found the some BADI which is not helped me lot. Eg i am processing the lead by entering existing BP/ prospect, i need to read the sales group assigned in the transaction.
Any body can help me out.
Thanks
Edited by: K Srikrishna on Feb 20, 2009 12:17 PM

Hello,
As of release CRM 4.0, it is possible to use the "Enhanced Backend
Integration Model", where you may assign a sales office to more
than one sales org, and a sales group to more than one sales office
However this assignments are shown in a different way as in the
standard model: multiple assignment are not viewed in the tree
structure but in tab "FUNCTION".
This is the standard design of the system. You can find more
information about this new model in symptom of the note 691015.
Also Please go through the documentation under following path:
Customer Relationship Management
Master Data
Organizational Management
Data Transfer
Convert Org. Model to Represent Multiple Assignments in SAP ECC
( Documentation).
I hope this information helps you.
Regards,
Sri.

Group Assignment

Good morning.
Just a quick question....
In MDM, can we group assignments and run multiple of them together, similar as we do with group validations.
Thanks

Hi Anuj,
As per my understanding, I think Group Assignment is not possible unlike Validation Group.
You can try with below MDM workflow:
Start Step>Assign(assignment1)>Assign2(assignment2)>and so-0nStop step. I think If in MDM workflow it allows Assign step one after other then you can execute all assignments in one go. Set this workflow trigger action on Record Add, Record Import and Record Update which automatically execute this workflow and thus Populate your all assignments automatically..
Regards,
Mandeep Saini

QM_Code group assignment to catalogue profile

Similar Messages

Maybe you are looking for